Inconsistency Found in segment E101CI_EEW_CUSTOMER_H.

Hi Experts,
We have a IDOC in development system CRM 4.0 created by BDFG, in that IDOC in the segment 'E101CRMXIF_CUSTOMER_H' there is a CHILD segment Z101CI_EEW_CUSTOMER_H with Z fields. it is generating/regenerating without any Inconsistency.
We have those fields in the Structure "CRMXIF_BUSTRANS" in "CRMXIF_CUSTOMER_H" i CRM 4.0 & as well as in CRM 7.0. These fields are nadded using EEWB.
The system upgraded to CRM 7.0 & the idoc is moved from CRM 4.0 to CRM 7.0, When we regenerate this IDOC in CRM 7.0 with new fields for some other segment it give me this message:
Inconsistency Found in segment:
Segment E101CI_EEW_CUSTOMER_H
Structure CI_EEW_CUSTOMER_H
"Ignore Inconsistency & continue(SAP Note 573251)"
"Remove Inconsistency & continue(SAP Note 568874)"
"Cancel Generation"
I opted "Ignore Inconsistency & continue(SAP Note 573251)",
We saw that the segment 'Z101CI_EEW_CUSTOMER_H' was not generated in CRM 7.0 as it did in CRM 4.0 but a new segment generated 'E101CI_EEW_CUSTOMER_H' with 2 fields which don't even exists in "CRMXIF_BUSTRANS".
If i opted the second option it gives me this message:
Name Range Violation: Name E101CI_EEW_CUSTOMER_H not permitted in customer system.
Project will go live next month & we are stuck in Data migration issue due to this IDOC error.
Waiting for a quick response.
Thanks,
D_marco.
Edited by: d_marco on Mar 23, 2011 7:37 PM

Hi,
While doing PGR at VL32N, we are facing this error. Can someone assist.
Regards,
Aruna

Similar Messages

EXP-00003: no storage definition found for segment in export import

Hii
I am exporting data of one schema which is on ORALCE 10g to oracle 9i
by exp utility export is complete sucessfully but it will giving error in some tables as EXP-00003: no storage definition found for segment(11, 883)
can you tell mi what is the cause of error?
What steps need to be to correct the error?

Hi,
Since you are exporting from 10g to 9i, can you tell me the version of Export utility used to export data from 10g.
Moreover if you are using 9i export utility try with compress=Y option and still if you are getting the error do post here.
Regards

XML Error: Only segments are allowed on top level,found non-segment E1EDK03

Hi,
I have a problem in my senario of receiving XML files with a Business Connector (4.7), adding some data to certain segments and elements, do some mapping steps and then convert the XML file to SAP IDoc. Then the IDoc should be send to R/3 system via ALE.
The senario works so far, if I test it with the "Send XML file.." option in the menu "Test" of the Business Connectior itself.
If I try to send the XML data as string in my browser the following error always occurs:
$localizedError:
com.wm.lang.xml.WMDocumentException: Invalid IDocXML document: Only segments are allowed on top level, found non-segment E1EDK03
$errorType:
com.wm.util.coder.InvalidDatatypeException
If I send send a string containing the XML data incl. the data I actually wanted to add in a flow step, it works.
Can anybody help me?
Thanks,
Kai
Message was edited by: Kai Lerch-Baier

I had been using MC Internet Explorer until this . Have compared this one to functioning XML viewable with MS Internet explorer. Below is code I am using trying to resolve this problem.
<?xml version="1.0"?>
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ecrtas"/>
<tt:template>
<tt:loop ref="ecrtas">
<ImportInstructions>
<ProjectSponsorInstruction>
<Instruction mode="Add">
   <SponsorName tt:value-ref="SPONME"/>
   <SponsorNumber>
     <IdValue name="Sponsor Number"><tt:value ref="SPONSOR"/></IdValue>
     </SponsorNumber>
    <SponsorType tt:value-ref="SPONTYP"/>
</Instruction>
</ProjectSponsorInstruction>
</ImportInstructions>
</tt:loop>
</tt:template>
</tt:transform>
Thank you again

Getting error EXP-00003: no storage definition found for segment(0, 0)

I am getting an error when using "Export: Release 11.2.0.1.0 - Production" on "AIX 6.1.0.0" and connecting to a remote database with version "Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production". I have tried many different options but the latest command that I ran is:
exp Userid=id/password@db TABLES=myschema.mytable file=mytable.dat log=mytable.log compress=y INDEXES=N
I am not using expdp for some specific reasons but this Export works on smaller tables whereas this has > 100,000 records. Also there is ample space on the landing directory.
Any help is appreciated.
Thank you!

This is the bug. Read this
OERR: EXP 3 "no storage definition found for segment(%lu, %lu)" [ID 21599.1]
It also happens When trying to export an object, all associated objects are exported as well. If one of the indexes is owned by a user and the exporting user does not have permissions on that index object the export fails.
Edited by: TSharma on Feb 7, 2013 11:47 AM

No inconsistency found for CCLM extractors

Dear colleagues,
I tried to configure scenario "Custom Code Management" and when I performed activities on step 6.2 Activate Extractors I received yellow message:
No inconsistency found for CCLM extractors
If I uncheck CCLM all are OK.
Could you please help me to resolve it?
Thanks a lot,
Alexander

Hi,
As Aneesh said, first Check the table T006 for the record for 'BOX' unit. If it is not there you have to do Replcation of Units from source system.
It does not affect the data existing in datatargets. It simply update the table T006.
Then after also check the table T006 for this record.
With rgds,
Anil Kumar Sharma .P

Inconsistency between profitable segments

Dear all,
We are processing the J1IIN excise capture for billing document. At this point of time system is throughing the above message.
This problem is coming only for call off order scenario only.
this problem is coming after pactch upgradation from 14 to 19 in ECC 5.0
please do the needful.
With kind regards
jakku
Edited by: sudhakara reddy jakku on Jan 3, 2011 11:19 AM

HI
refer Note 1290255 - Error in excise invoice during cancellation in J1IH
This relates to J1IH, i guess it should apply to you as wel
Ajay M

Java null pointer exception while getting a segment DFF handle

Hi,
my requirement is to make a field mandatory based upon a dff segment value (Y/N). i override PFR since segment is a poplist on the page (and poplists don't fire any event)
i searched in the "view source" of the page and found that segment id is ActFlexField0
when i click on save button i got "java null pointer exception"
here is code:
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean) throws OAException
+{+
+//get a handle to AM+
OAApplicationModule am;
am = oapagecontext.getRootApplicationModule();
oapagecontext.writeDiagnostics(this,"Root AM=>"oapagecontext.getApplicationModule(oawebbean).getName() ,1);+
if(oapagecontext.getParameter("applyCreActBut") != null || oapagecontext.getParameter("saveDtlBut") != null)
+{+
+/*Conditional mandatoryness of IdContribuente field*/+
+// first, find the flexfield's handle+
OADescriptiveFlexBean oaDFF;
oaDFF = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("ActFlexField");
+//oaDFF.processFlex(oapagecontext);+
oapagecontext.writeDiagnostics(this, "Niccal: i got DFF handle", 1);
+//oapagecontext.writeDiagnostics(this, "Niccal: oamcb value is:"+oaDFF.getAttributeValue(), 1);+
+/*+
RenderingContext con = (RenderingContext) oapagecontext.getRenderingContext();
Enumeration x= null;
x= oaDFF.getChildNames(con);
oapagecontext.writeDiagnostics(this, "After getChild", 1);
while(x.hasMoreElements())
+{+
String aParamName = (String)x.nextElement();
oapagecontext.writeDiagnostics(this, "Niccal: DFF segment names are:"aParamName, 1);+
+//OAWebBean dffbeans=(OAWebBean)oaDFF.findChildRecursive(aParamName);+
+}+
+//oaDFF.mergeSegmentsWithParent(oapagecontext);+
OAMessageChoiceBean oamcb = (OAMessageChoiceBean)oaDFF.findChildRecursive("ActFlexField0");
+//String sIsForeign = (String)oaDFF.getAttributeValue("Attribute1");+
+//oapagecontext.writeDiagnostics(this, "Niccal: Attribute1 is:"+sIsForeign, 1);+
oapagecontext.writeDiagnostics(this, "Niccal: before if", 1);it's urgent
any help appreciated
thanx
N

hi Keerthi,
thank you.
i tried with below code but still unsuccesfully
+ oaDFF = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("ActFlexField");+
oapagecontext.writeDiagnostics(this, "Niccal: i got DFF handle", 1);
OAMessageTextInputBean mtib = (OAMessageTextInputBean)oaDFF.findChildRecursive("ActFlexField0");
oapagecontext.writeDiagnostics(this, "Niccal: before if", 1);
i am able to print 1° comment line but not second. so i think it's something wrong getting the segment handle.
anyway i'm not able to reach your suggested if statement because execution stops before.
Infact, if i comment line :OAMessageTextInputBean mtib = (OAMessageTextInputBean)oaDFF.findChildRecursive("ActFlexField0");
page doesn't give error and saves data.
any suggestion appreciated,
thanx,
N

Segment Release version issue - ECC6 to older ver.

Hi
Our system was recently upgraded from ECC5 to ECC6 and we are facing an issue with one of the interfaces that is connected directly to the R/3 System.
This issue is realted to an outbound interface and it used to work fine when we were on ECC5. The message we are sending is a bespoke extension based on basic type DELVRY03. The segment E1EDL24 have new fields added to them in the 701 release version compared to the 620 version which was the higest available on ECC5.
I tried reducing the IDOC segment release version to 620 and 46C in the partner profile, but the message received by the thirdparty still contains the new fields which is causing an issue at their end.
I would appreciate if you could provide me some guidanace on how to appraoch this issue.
Thanks & Regards
Praveen

Hello Guy's,
We have recenlyt upgraded our quality system to ECC6.
I am also facing the same issue, As per my unnderstadning if I put segment release in WE20 then in ALE communication Layer Idoc should remove the fileds which are not intended for the given release. For example E1EDP01 is having highest release 008 for 701 release. If I set 40A in partner profile the Idoc should generate with fileds only available in 40A release i.e. version 003,but SAP is filling all thefilds which are available in701 relase.
I don;t understand why SAP has given such a functionality though it actually not filter the data at communication layer!!.
Could you please let me know did any of you really see the difference when you use segment release in WE20 when using PI as receiver? I did sevaral test for MATMAS, ORDERS found this segment release is useless.
If you have applied any workarounds(other then updating receiver system mapping) please let me know. I think is there any modification in ECC6???
Edited by: Naresh Reddy K on Jun 7, 2010 3:30 PM

Releasing unreleased segments in Standard SAP Idocs

Hi Friends,
I have a problem with an iDoc PPCC2PRETTICKET01, when I am trying to generate the schema for this idoc, standard function module throwing an error, saying like "Segment E1BP_PP_TIMETICKET in release 620 Unknown". I went to t-code WE31, I found that segment E1BP_PP_TIMETICKET not released. I am trying to release but the system is throwing the error like " Name range violation : Name E1BP_PP_TIMETICKET not permitted in CUSTOMER system" .
But I need to generate the schema for this idoc. Is there any possibility to release this segment, if yes, please let me know the steps to process.
Awaiting for your reply.
Thanks and Regards
Praveen

Hi
In all the releases of SAP, including ECC 6.0, that segment not released. If I want to release it, how can I release it.
Regards
Praveen

Segments Or Subclips ?

After I had replied to a question from Steve Kir I started to experiment with Segments and Subclips.
Until now I have usually split my clips into Subclips so that every scene is separated.
The only problem with Subclips is the dodgy numbering/ordering system.
However, I have just found that Segments can be used the same as Subclips and they are numbered consecutively from 1 to 100 or any amount.
Furthermore, just keeping them as Segments means one less process to go through.
Are there any disadvantages to using Segments in this way? There must be otherwise Subclips would be totally superfluous?
Ian.

Could you explain exactly what you're doing Ian? Segments are just marker sections in a clip. They don't exist in any way outside of the clip. If you drag a segment, that is drag the marker out of the clip, the segment becomes a subclip. If you drag the segment onto the top level of the project or into a new bin it's named Segment 1 from 'ClipName' and is a subclip. It follows FCE's conventional alphanumeric ordering segment 1 followed by segment 10, 11, and so on.
If you drag the segment directly from the clip into a sequence, you're making a subclip. It will work fine, but it does have a couple of downsides. The subclip that's in the sequence is an independent subclip. It has no master clip in the browser. This can, on longer projects, slow down sequence load times. It also means you lose the reveal in browser functionality. If you have the playhead over a clip in the sequence and press Shift-F it will show you where the master clip is even if it's buried deep in bins. This won't work, because there is no master clip in the browser. The match frame (F) function will work however.

Segmentation Fault using Terminal after OS update to 10.6.3

Hi folks, I did a search on the web and on this site for this info and couldn't find anything so I'm posting...
I run gnu backgammon using terminal, which launches X11 to run the app. This has been working fine until today, after I updated to 10.6.3. I upgraded first thing this morning and the program ran fine for a few hours. I shut it down and later restarted it and I now get "segmentation fault, process ended"
Can't find anything to help me get this resolved. Can anyone help?

TomPDX and others:
I've just updated to 10.6.3 and have found this segmentation fault.
But it didn't do that immediately:
First, it chugged away taking up 99% of the CPU. I left it overnight thinking it was just rebuilding it's databases like the first time it ran.
Next morning I found no GNUBG. Manual restart from the command line showed segmentation fault.
Any news on this ? I had a quick look at the gnu home page but can't find any discussion there.

Finding segment

Using V$active_Session_History i found the db file sequential read. please tell me the query from where i found the segment name against block
Thanks

select segment_name
from dba_extents
where file_id=<p1>
and <p2> between block_id and block_id + blocks - 1

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

New table contains data after Successful activation

HI All,
one DSO activation got failed due to red request which was present in the target. We repeated the DSO Activation step once we deleted the bad request from DSO and it got completed successfully.
Generally, as part of ODS Activation, the data will move to ACTIVE table and CHANGELOG table and after that the same data will get delete from the ACTIVATION(NEW) queue (u201CU tableu201D).
After that DSO Activation termination, U table data is not getting deleted for that particular table.
As per the SAP note u201C680480u201D, if any termination happens while activating DSO then there might be a chance of just activating the request after that it wonu2019t delete the activation queue. And also, from that point of time onwards the new table continue to grow.
The above mentioned sap note contains solution upto the version BW 3.5. As my system is BI 7.0, we cant implement any patches as mentioned in the note.
Can any one please tell me in which table and all do i need to delete the entry of that particular request from the table apart from RSODSACTREQ.
Reards,
Sridevi.

Hi Sridevi,
Actually it's not advisable to delete the entries from the DB tables. But at times, we are forced to do that to avoid inconsistencies in the system.
If there are no pending requests in DSO for activation and if you are able to upload further to downsteam data targets like Cubes, you need not to worry about Activation Queue.
For the time being, since you have already deleted bad entries from RSODSACTREQ and RSREQICODS tables, I feel there will not be any inconsistencies in the system.. So do not delete from any more tables.
In the next complete data load, if any inconsistency found, then you delete from the other tables.
In order to avoid this in future, make the status to red in request monitor before deleting from the DSO Manage.
Regards,
Suman

Problem with application server shutdown when connecting

Hi Friends,
I am new to J2EE applications.
I developed a web application that uses jxl and mysql for reading excel sheets. The host I am working on is supposed to be the server. The application I am running is working absolutely fine, by creating a directory and saving the excel file in my webapps folder and inserting the data to the database. But the minute I send the file from client system, there is a sudden shutdown in my server.
I am sending the jsp and java code related to this application and related log file..
I guess the main problem is with sending the exact path from the remote client, rest all is fine including excel and database interactions.
I commented the database interaction class just for now as I don't think there is a problem with it.
I am using Tomcat 4.1, MySQL 3.23
====================================================
JSP FILE
=====================================================
<%@ page language="java" import="pdss.*"%>
<html>
<head><title>File Upload</title></head>
<body>
<%     String action=request.getParameter("go");
String message=request.getParameter("msg");
String str="";
if(message!=null)
     str="Please enter valid filename!";
ExcelInteraction xlInt=new ExcelInteraction();
if(action==null)
%>
<center><font color="red"><%=str%></font></center>
<form name="myform" method="post">
<input type="file" name="filename"></input>
<input type="submit" name="go" value="Send">
</form>
<%
else if("send".equalsIgnoreCase(action))
     String filename=request.getParameter("filename");
     int ex=0;
     System.out.println("************"+filename.endsWith(".xls"));
     if(filename!=null && (filename.endsWith(".xls")))
          ex=xlInt.fileTransfer(filename, getServletContext());
     else if(filename==null || ("".equals(filename)) || filename.endsWith(".xls")==false)
          response.sendRedirect("uploadFile.jsp?msg=a");
     if(ex>0)
%>          DONE
<%     }
     else
%>          Data Inconsistency found
<%     }
%>
</body>
</html>
======================================================
JAVA FILES
======================================================
ExcelInteraction:
package pdss;
import pdss.*;
import java.io.*;
import java.lang.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class ExcelInteraction
     //PDSSUtilities pdsUtil=new PDSSUtilities();
     public int fileTransfer(String readFile, ServletContext app) throws Exception
          int i=0, j=0;
          String strDirectory = "pdssexcelfiles";
          System.out.println("..............ReadFile..."+readFile);
          File srcFile=new File(readFile);
          System.out.println(".................Created source file."+srcFile.getAbsolutePath());
          File destFile=null;
          String newDirStr="",srcFileName="",destFileLoc="", realPath="";
          try{
               realPath=app.getRealPath("/");
               System.out.println("newDirStr..........."+realPath);
               newDirStr=realPath+strDirectory;
               System.out.println("newDirStr..........."+newDirStr);
               if((new File(newDirStr)).exists()==false)
                    boolean success = (new File(newDirStr)).mkdir();
                    System.out.println("....................success..."+success);
                    if (success) {
                         System.out.println(".................Directory...: " + strDirectory + " created");
               srcFileName = srcFile.getName();
               destFileLoc=newDirStr+"\\"+srcFileName;
               System.out.println("DestFileLoc............"+destFileLoc);
               if(srcFile.exists()){
                    destFile=new File(destFileLoc);
                    InputStream in = new FileInputStream(srcFile);
                    OutputStream out = new FileOutputStream(destFile);
                    byte[] buf = new byte[1024];
                    int len=0;
                    while ((len = in.read(buf)) > 0){
                         out.write(buf, 0, len);
                    in.close();
                    out.close();
               System.out.println("............File copied to... "+destFile.getAbsolutePath());
               System.out.println("......Closing Streams......");
               /*if(destFile.exists())
                    j=pdsUtil.readXlData(destFileLoc);
                    System.out.println("..........j::"+j+"rows affected");
          catch(Exception e)
               e.printStackTrace();
               System.exit(0);
          return j;
=====================================================
LOG FILE FROM HOST SYSTEM:
=====================================================
2008-09-16 16:53:52 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:53:52 StandardContext[pdss]: Trying exact match
2008-09-16 16:53:52 StandardContext[pdss]: Trying prefix match
2008-09-16 16:53:52 StandardContext[pdss]: Trying extension match
2008-09-16 16:53:52 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
2008-09-16 16:54:01 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:54:01 StandardContext[pdss]: Trying exact match
2008-09-16 16:54:01 StandardContext[pdss]: Trying prefix match
2008-09-16 16:54:01 StandardContext[pdss]: Trying extension match
2008-09-16 16:54:01 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
=====================================================
LOG FILE FROM CLIENT SYSTEM:
2008-09-16 16:54:41 StandardContext[pdss]: Mapping contextPath='/pdss' with requestURI='/pdss/uploadFile.jsp' and relativeURI='/uploadFile.jsp'
2008-09-16 16:54:41 StandardContext[pdss]: Trying exact match
2008-09-16 16:54:41 StandardContext[pdss]: Trying prefix match
2008-09-16 16:54:41 StandardContext[pdss]: Trying extension match
2008-09-16 16:54:41 StandardContext[pdss]: Mapped to servlet 'jsp' with servlet path '/uploadFile.jsp' and path info 'null' and update=true
2008-09-16 16:54:42 StandardContext[pdss]: Stopping
2008-09-16 16:54:42 StandardContext[pdss]: Stopping filters
2008-09-16 16:54:42 StandardContext[pdss]: Processing standard container shutdown
2008-09-16 16:54:42 ContextConfig[pdss]: ContextConfig: Processing STOP
2008-09-16 16:54:42 StandardWrapper[pdss:jsp]: Waiting for 1 instance(s) to be deallocated
2008-09-16 16:54:42 StandardContext[pdss]: Sending application stop events
2008-09-16 16:54:42 StandardContext[pdss]: Stopping complete
=====================================================
Regards
Vasumitra

The VERY FIRST message in the server log gives you a hint as to what the problem might be. The server thinks you have spaces in your PATH to the application server. Therefore, the solution is to kill the server however you need to (task manager, whatever) and then reinstall it in a path that doesn't contain spaces. That's the low-hanging fruit here; if that doesn't work, well, then we will have to find some other solution.

Inconsistency Found in segment E101CI_EEW_CUSTOMER_H.

Similar Messages

Maybe you are looking for