Inspection lot not appearing in QA32
Dear Experts,
We have transfered a batch from a storage location of one plant to the storage location of another plant through movement type 909 with all require datas entered and saved the transaction . But while we checked in MB51 and QA32 , no material document or a Inspection lot for stock transfer not appearing.
When checked for the logs Message QA 150 appearing for ' Errror inserting QALS as update was terminated ' . What to do ?
Thanks.
Hi
Is 909 is SAP's standated Mvt type?
Check the setting for this mvt type in QCC0->Qulity inspection->Inspection for goods Mvt.--->Inspection lot origine & Deactivate Quality inspection.
I have a suggesion.for transfering Material from one plant to other SAP has own Mvt type:301(single step--->Without purchse Order).You can active 08 inspection type for Material at receiving plant.It will create a lot at receiving plant.
In addition to this 351& 352 are used when purchse order(STO) is there.
In hop this will help me.
revert back for any Querries.
Regards
Sujit Gujar
Similar Messages
-
Today's inspection lot not appearing in qa32 & so processing through qa02?
Hi all,
Now when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
later on i processed the ud through qa02 only
regards,
SanjanaNow when i created the GR, eventhough the inspection lot is created, it is not appearing in qa32, please suggest me why?
later on i processed the ud through qa02 only
Dear as per my understanding give the exact material code,if batch managed give the batch also,give the lot created date etc and again check in QA32 as you saying you can able to access inspection lot through QA02 then it must be visible in QA32 also.
Select the all inspection lots radio button in QA32 if still you couldn't able to find the lot in QA32 as UD might have already done.
Cheers
KK -
New lot not appearing in qa32 - v urgent
Hi all,
I have an urgent issue to resolve. we have developed a report that shows those batches
-for which UD has been done 8 days before but no despatch till date OR
-for which no UD has been done and date of production is 8 days before from today.
User wants that a new lot for above batches should appear for UD again in qa32.
For this i have defined procedure as:
1. Run REPORT Which will identify batches older than 8 days (from the days of production or last UD date).
2.Go to QA07 Enter material codes, Batch numbers, and plant and select the option of Block Batch at lot creation.This will transfer all the mentioned batches to blocked stock and create an inspection lot automatically.simultaneously an inspection lot will start appearing in transaction QA32, against this batch for inspection.
Now the issue is that after QA07, I can see in mb52 that stock of the batch move to restricted, but no inspection lot appears in qa32. a new inspection lot should appear in qa32.
any ideas ? have i missed anything? i have also done changes in inspection plan,
cant figure out what i missed. pls respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.Let me simplify my question:
i have some batches in system for which UD had been done 8 days
before but no despatch has been done against those batches.User
want to give UD again for those batches.
what i advised him to change the inspection plan of those
materials by putting '9' in 'usage' and '4'in 'status' fields in
qp01 and then go to qa07 and enter material codes, Batch
numbers, and plant and select the option of Block Batch at lot
creation.The batches automatically transferred to blocked stock.
Now the issue is that after batches transferrence to block stock,
new lot should appear in qa32 but its not appearing.any ideas??
Have I missed any thing? Kindly give a prompt reply. -
Results recording tab not appearing in QA32
hi,
can anyone tell me why results tab not appearing in QA32 , is there any authorisation missing?Just check which roles are added to that used id
selec 1 role that is relevent to inspection (result recording) and add QE01 t_code in that role.
take help from ur basis guy for this. -
Inspection lot not generated after goods reciept?
Dear SAPIENTS,
Inspection type 01,0101,08,89 and all activated in material master but then allso inspection lot not generated after goods reciept. Can anybody suggest here that what could be the reason.
Regards,
Kaushal RaiHi Kaushal,
For Inspection lot from GR, 01 Inspection type is enough.
- Ensure 01 Insp type is active and Post to Inspection stock indicator is active for that inspection type.
- Ensure the QM is active for 101 Movement type, SPRO>Quality Management>Quality Inspection>Inspection Lot Creation>Inspection for Goods Movements>Deactivate Quality Inspection for a Movement Type
Regards,
Keerthi. -
Integration with EWM-Inspection lot not getting created
Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn -
Inspection lot not getting generated after PurcGR
Hi,
Inspection lot not generated after doing GR for a purchase order. what could be the reasons?
for the first 2 puchase orders, Inspection lot was created. however, for the 3rd Purchase order of 100qty, i did GR for 50 qty only. after then for new purchase orders, the material status has become unrestricted and directly going to stock.
Inspection type 01 is mainted in material master
QM info record has been maintained.
please clarifyHi Nagaraj,
Try the following.
1. Check the inspection set up in the Material Master record for inspection type 01 whether 'post to inspn stock' is selected. If not, select it.
2. Check in Customizing for 'QM in Procurement' in 'Define QM system' activity, 'certified QM system - skip' is marked(Actual QM system). If this indicator is selected no inspection lot is created even if there is an active inspection type. This is valid if you maintain a target QM system in QM view of Material Master (Purchase data).
3. Check in IMG set up :
Quality Inspection -> Inspection lot creation -> Inspection for goods movement - whether inspection lot origin 01 is specified for movement type 101 and also ensure that QM is active for this movement type.
Please revert after trying these options.
Regards,
Swati -
Inspection lot not created (QA32)
HI , QM/PP Expert,
1.for the raw material Inspection lot is not created while posting . I have done settings in mat. mast.
2.Can tell while doing MIGO we have change stock type or system teckes automatically.
Nitu..........Hi Nitu,
You have maintained inspection type, number ranges etc etc perfectly, correct?
Then now check the same "stock type" (that you have checked in MIGO) in Purchase Order also. It is be check for line item details--> Delivery tab.
When the PO is get posted system checks the inspection type activation in the, if it is activated then it will set the "stock type" as Quality Inspection, at PO itself and then the same thing copied over to GR. So if the inspection type is maintained accurately then all the processed PO & GRs will react accordingly.
One more thing you need to check, as you are complaining "Lot is not getting triggered" then let me know have you maintained the Q - Info Record for this Plant-Material-Vendor Combination? Check it through trx QI03.
Regards,
Shyamal -
Inspection Lot not coming in QA16
Dear Masters,
I am using inspection lot origin 04.Inspection is carried out by uaing a task list.As soon as the production confirmation is done , inspection lot is cretaed and it is seen in QA32.But the same lot is not coming in QA16 , Why?Please suggest.
Thanks,
RamI believe you answered your own question. With free inspection points, it does not show up in the QA16 list. That is because SAP has no idea how many inspection points your going to decide to process. 1? 3? 20? When is the lot ready for a UD? Only you know that. SAP has no clue.
I believe if you had a lot that used inspection lots by qty or time and the inspection points were pre-created, then all results recorded, that would show up on the list.
But with free inspection points, the system has no way of knowing if your done with the lot or not.
Craig -
Re:inspection lot not moving from 03 inspection type to 04 inspection type
Hi all,
I am in a issue. I have done UD for in process inspection. i.e 03 type. Now when I am looking for the inspection lot updateion to inspection type in QA32 I am not able to find it.
This is a live issue,
Please advice as soon as possible.
I have chaecked all the setting ,I dont think there is any issues in it .
RegardsHey Vivek you ask too many questions at once.
To check the follow - up action. See in the UD screen itself below the ud code you enter.
I checked this & I found :for each order item
batch storage location.
It means it will create inspection lot if any of the mentioned condition changes either order,batch,or storage location. In other words it will create unique inspection lot for Order,Batch and storage location combination.
Now, remember why I have directed to this field because Craig has furnished that it will create a lot with 04 type as soon as you release the order but for that you need to select the option for "Early Lot creation". Correct?
And you were not able to find the way how and where to do. So I just guided to you but sorry dear I have never ever used this functionality.
Now what are you doing? waiting for another two hrs to have the lot? Simultaneously you should check what is happening with the Order from where the lot is generated.
Have you completed UD for Lot 03 this time?
Most importantly pls let us know what is the Inspection points you have selected for the inspection plan for 04 type lot and at the Routing/Master Recipe from where the 03 lot get the MICs?
It may possible as you described the lot is getting triggered after 2hr from UD of 03 lot then the inspection points for the lot 04 or 03 would be time based inspection.
Regards,
Shyamal -
Inspection Lot not created after mvt 322.
Dear All,
I'm facing a problem : after a movement 322 no Inspection (QM) bach was created in QAVE...
In MMBE WM stock view I've got the lot number (quantity 1, stock type Q), and the storage bin which match with the inspection lot.
When trying to take the UD (QA11), the following error message appear :
MMBE :
Do you have any clue ?
Regards,Hello Amol,
Thanks for your answer.
I gonna check QALS tomorrow as I don't have access to the system right now.
I need to make some clarifications to my previous message, in fact ten inspection lots was generated under the same material document which had 10 items (via MB1B).
9 Inspection lots has been accepted (321) and successfully put into the free stock by the quality, I only have this lot remaining coming from the same document as other ones.
Material Master/Quality Mgmt and inspection types for this article/Plant has not been changed and are correctly set...
I cannot use MB1B, mvt code 321 to move this QI stock to the free stock as QM is activated... I'll get something like "Change the inspection stock of material 0000000 in QM only".
I thinks that, to clean the stock, the only option i've got is to make an inventory from Q stock (mvt 713).
I'm trying to find out what are the root causes of this problem for this not to happen again....
Thanks again for your help,
Kevin
PS : Just checked QALS table this morning, indeed, the inspection lot does not exist.
So, i've got no trace of it in QM, but I'm able to find it in WM...
Message was edited by: Kevin Bou -
Inspection lot not being created against inspection type 10 or 02
Hi
We need to inspect material at the time of goods being delivered to material. I did the following steps:
1. in SPRO, Assign Inspection Lot Origin to Delivery Type, against Delivery Type LF we mentioned insp. origin 10
2. Assigned insp. type 10 in material master QM view
3. Created Sales Order using the same material code
4. Created Outbound Delivery against Sales order, but when we press button for Post Good Issue, the system issues the message "Status of inspection lot 100000000004 / partial lot 000000 does not allow good issue" BUT NO INSPECTION LOT IS BEING SEEN WHEN WE USE QA32/QA02. I have also seen the QALS table using SE16 and no record for inspection 100000000004 is seen.
Please also note that
1) other inspection lots are being created and processed normally such as inspection origin 01, 14, 15, etc.
2) each time we try again to create delivery and press post good issue button, IL number is incremented say 100000000005, then 100000000006, 100000000007, so on.
3) the issue is the same for insp. origin 02
Please reply
ChrisHello,
Check if this is helpful to you.
qm in sd -
Inspection for HU: inspection lot not created upon packing
Hi All,
I want to inspect a material by Handling Unit, I have set "Inspection for HU" within the Inspection Setup of the material master. I created PO and inbound delivery, in the inbound delivery I did packing, but inspection lot is not created after packing. When I go on with MIGO, system throws error message "Change the inspection stock of material in QM only", according to this message, there should be an inspection lot already created, but I cannot find it in QA32.
Regards
DannyHi,
There are two prerequisition:
1) Check configuration setting : SPRO --> Logistics - General --> Handling Unit Management --> Basics --> Technical Basics--> Materials Management--> Inventory Management --> Set QM Check and Delivery Type for Each Movement Type. the respective movement type is not deactivated for quality inspections. The indicator QM not active is not set.
2) In material master, Handling unit should be active for inspection type. -
Inspection lot not created on GR for production order
I want to create an inspection lot upon receipt from production. Task list is set up. Inspection type 04 is assigned in material master. But when I do the goods receipt for a production order, inspection lot is not created. In the quantity tab of material document, I see that the staus GR doc is 7(Inspection lot is created at inbound delivery). I don't know where it is coming from.
Please help.I'm not sure what you mean by creating lot after receiving.
When you do a GR from production the proper inspection type is the 04 inspection type. Not 05. This is pretty standard SAP functionality.
Check the material movements for 101 (I assume you're using a 101 GR material movement), and make sure in config no one has deactivated QM for the material movement.
Then, make sure you start with a freash production order. Don't copy from a previous one.
FF -
Inspection Lot not generated, with MIGO 561
Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
PiyushTo load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.
Maybe you are looking for
-
How do you delete songs that you purchased through iTunes but don't show up when you connect the iphone to iTunes? They don't show up in the music section when you click on "On this phone". Side Note: I have my phone setup to manually manage music. P
-
Cani I upgrade to Version 9.4.2?
I had to use my iPhoto library, which, is on an external hard drive on another computer. The verion of iPhoto on that computer is 9.4.2. Mine is 9.3. Is it possible for me to upgrade? All I can find online is Version 9.5.
-
The iPod mini has no problem charging, but it will not update. The songs are added to iTunes but can't get on to the actual iPod. What can I do about this?
-
Patch 10.2.0.1 - 10.2.0.2 on Windows
Hi there, i try to upgrade an empty 10.2.0.1 (Windows XP 32bit, VMware Server 1.03, Enterprise Edition) to 10.2.0.1. First everything works fine. But when i run catupgrd.sql i find the folowing lines in my Logfile (near the end). Does anybody know wh
-
JButton easy question (i think)
in swing what is the name of a button that can also be a list. It is usually used in toolbar, such as the one in internet exlporer. You can chosse between a click on the button or a click on a little arrow that makes a menu appear. (example : the "ba