Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock

Hi Experts,
Please guide me for:
At the time of UD,sometimes i forget to enter the unrestricted stock quantity in inspection lot stock tab therefor quantity does not transfer into unrestricted stock and its shown in QI.So,i want to make it mandatory.please suggest me,How to do it?
Thanks & Regards,
Vivek Bhojak

Hi Vivek,
Please activate "Stock Posting in Background" indicator in Tx QS51 for your UD code as shown below -
This should solve your purpose and complete stock form QI will be posted to Unrestricted stock/Blocked stock. This is a safer process I always recommend.
Otherwise, in case you still wish to so UD posting form 'Inspection Lot - Stock Tab' manually, but want to make sure that is there is no quantity selected, then the UD shouldn't be done, then you will have to make enhancement appropriately below -
QEVA0001 Enhancement: Quantity posting for usage decision
Thanks,
Arijit
Message was edited by: Arijit Banerjee

Similar Messages

Incorrect Unrestricted Use Stock Figure in VL10h

Hi,
The unresticted use stock figure in VL10h is not correct for a sales BOM scenario as described below.
I have an order consisting of sales BOM:
Top level material Item category TAP (pricing at item) Schedule line CT (no goods movement) Stock 0
Component material Item category TAN (standard) Schedule line CP (with goods movement) Stock 1
When running VL10h the unrestricted use stock column is showing 0 for both items - even though there is 1 in stock for the component.
Thanks
Caroline

First check in MMBE whether the stock is not flowing against "Reserved against Delivery". Alternatively, you can check in MD04 also.
As you would be aware stock in sale order will be determined based on the schedule line category VOV6 where you should have checked the box "Availability". The control is also in Requirement Class where you can make a check.
thanks
G. Lakshmipathi

(Usage Decision )Stock Post To Unrestricted Use.

Dear QM Expert,
I create a inspection lot of Finished Good and inspection type is 04 used when take a decision in QA11 then the Inspection lot is not open and the message has shown.
<b>The function you selected
cannot be
carried out:
Access usage decision</b>
When i use QA12 then message show is this,
<b>You cannot perform this task because the usage decision has not been made yet.</b>
But the stock is not posted To unrestricted use.
I want to stock post or cancel the document but i cant cancel or reverse the document.
Please suggest me the urgent bases what i do for stock post to unrestricted use.
Once problem has been mentioned here that the logistic period has been closed and FI/CO period will be close after six days.
thanks
ufarooq
Message was edited by:
Shahzad Sami

Hi,
Follow these steps for the qm inspn procurement.
1.Create Material Master Record with QM View.
2.Activate QM Proc/ Specify Control Key 0001.
3. choose Inspn set up and inspn type to be entered as 01 and set the active indicator.
4. Create Q-info record with material / vendor.(qi01)
5. Enter the release by date as 31.12.9999
7.Create inspn plan(qp01) with usage 5 and status 4and enter the control key as PPQM.
8.Choose the operation and assign the inspn characteristic / sampling procedure
9.MD61/MD02/MD04
10 Convert the Purchase requisition as Purchase Order.
11. Receive the Material against the PO.
12. In MIGO against PO receive the material.
13.QM lot will be created
14.qa02 check inspn plan / sample.
15.qe51n results recording
lot origin 01 mat no and execute results
16.qa11 ud code select accept and chooseinspn tab page and type the qty to be proposed and save.
17.stock will move to unrestricted use .
Regards,
nandha

Sales order stock should post in unrestrcited use stock

Hi
We have MTO and MTS both scenario. Now, for SFG materials we produce through CIR in MD81. Hence, the planned order -> process orders are generated after MRP run has reference of sales order.
Our all SFG products are Auto Goods receipt through COR6N T-code. But, our scenario is for these CIR requirement all process orders stock goes to sales order stock. We can't use these sales order stocks in MTS or, other MTO FGs.
Hence, we want whenever process order confirmation we execute in COR6N, the stock should not be posted through 101E and later we are doing 411E. Rather we want in COR6N the stock should go to unrestricted use stock.
What are all config settings or, processes are there to satisfy our requirement. Also, what can be negative impact for that.
Please suggest.
Thanks,
Susanta

If the need is to build SFG stock as unrestricted stock, then why are you placing CIR & planning them in sales order segment?
Place PIR via MD61 for this SFG, then demand will be in plant level & the supply proposal which is generated will also be anonymous. Once you post GR for the supply proposal it will be 101.
If you do not sell your SFG, then maintain stg. grp as 70, if you sell at SFG level as well, then work with stg. grp 40. Maintain indiv / coll indicator as 2.
Do a test in your sandbox & if it meets your need adopt in PRD.

How to get "Valuated unrestricted-use stock in previous period"

Hi!
I need the Valuated unrestricted-use stock in previous period for a material.
I'm using the MCHB table but CVMLA field doesn't match with the value calculated by standard tcode.
There is any FM that can help me?
Thanks
Salvatore

Problem solved

Inventory - Unrestricted Use Stock

Hi Friends !
At the BEx level. we restricted key figure to see the Unrestricted Use Stock
Key Figure Name : TOTALSTCK
0STOCKTYPE = A
SPECIAL STOCK INDICATOR = #
Current Output :
CALENDAR WEEK                       CALENDAR DAY                           UNRESTRICTED STOCK
25/2011                                       06/22/2011                                         100
                                                    06/23/2011                                         100
Expected Output:
CALENDAR WEEK                       CALENDAR DAY                           UNRESTRICTED STOCK
25/2011                                       06/23/2011                                         100
But the data in the column are showing double values. Is this the value this inventory works? or any other issues? Any hint?
With Regards
Rekha

Hi Arun,
my understanding is that for reversal and stock intransit you will have two types one is stock in transit from that warehouse and stock in transit to that warehouse. Accordingly you will have the values populated into either issues or receipts. And coming to BW if you can notice that BW populates the cube with a special marker called process key indicator rather than movement type, it gets the moment type along with data and i would suggest the best way to reconcile your data is to always check in your cube by taking total of your receipts sock and issue stock( any stock type) and then subtract issue from receipt and compare with figure in r/3 (IF YOU ARE USING CUBE 0IC_C03) as you know this cube has non cumulative KF so i found thats the better way to get a considerable reconciliation.
Hope it helps!!!!!!

Block picking from unrestricted use stock when it is in schd. for delivery

Dear Experts,
I have 50 units in unrestricted use stock of particular material for a storage location in the plant. I have made two outbound deliveries for this material. When I pick 50 units of this material, these 50 units i can see in schd. for delivery and in unrestricted use stock also I can see 50 units in MMBE. Now, 50 units are in unrestricted use stock, once again i will be able to do picking of another 50 units of this material from the same storage location. (there is physical variation in stock.) Now, when i will do pgi for one outbound delivery, the stock from unrestricted use will be debited and system not allow to do pgi for another outbound delivery. (we don't want to allong negative stock). Is there any way to block picking of the stock which are in schd. for delivery. Thanks in advance.

Maybe you should set proper availability check for your deliveries / materials.
SPRO > SD > Basic Functions > Availability Check and Transfer of Requirements > Availability Check > Availability Check with ATP Logic or Against Planning
Here you can carry out of your setings.
E.g.
.. > Carry Out Control For Availability Check (transaction OVZ9)
Here you should set for proper checking group / checking rule combination > "Include deliveries" (V_441V-VBBLP) field should be set.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/744b51546011d1a7020000e829fd11/frameset.htm
Regards,
Csaba

Inspection lot per HU instead of batch in inter company stock transfers

Hello,
We are testing intercompany stock transfers and we face the following problem when we check inspection lots created at the receiving plant: one inspection lot is created for each HU, while we want one per batch.
We multiplied tests with many combination on material settings on inspection type 01 (which is inspection type used on inspection lot):
u2022     with or w/o u201CInsp. for HUu201D
u2022     u201CControl inspLotu201D: blank, 1, 2 or X
without success!
Letu2019s me precise that inbound delivery is created automatically from goods issue at issuing plant because we activated SPED functionality (then Hus numbers are directly taken from outbound delivery to inbound delivery).
Also we noticed something that could help understand the problem:
1.     when issuing plant picks HUs into the warehouse, they confirm TO via RF transaction (LM61). As a result, outbound delivery as a main item and there is a split by several sub items, as many as HUs confirmed
2.     when we test the picking confirmation out of a non RF transaction (LT12), there is a main item but only sub items per batch (qty is then aggregated)
What is maybe interesting to notice is in the first case, inspection lot at receiving plant is created per HU while in the second case, it is created per batch!
Second behavior is what we require but RF pick confirmation is mandatory for us!
Is there any chance to change QM behavior in that case?
Thank you,

Dear Gajesh,
thanks for your replay. It is very helpful.
Option A
1) The finish goods would be are already release and that does not go with our Q-policy.
2) Does this mean, I have an inspection lot at the point of time of GR from production to warehouse and another inspection lot at the time of delivery. That would mean I double my work? And the time of delivery happens one day after GR from production but the Q-results still need some more days. I do not see how this should work.
Option B
1) What do you mean by multiple GR to the warehouse storage location?
Where do I have to activate the copying option for the inspection lot?
Here I see the problem still existing. The result of the MIC has not been found out yet, the UD can not be done and I do multiple goods movement to the warehouse. What is the lelp? If I could make several stock transfer from the q-stock within the inspection lot that would be the best.
May I am thinking wrongly but the best would be to keep the stock in the q-stock. Does a suitable BAPI exist where I could program a logic to it or what do you think?
Thanks for your feedback,
Best regards,
Heinz

Control if a material is posted to unrestricted use or quality inspection

Is there a way in materialmaster I can set if I want the material default to be posted to quality inspection rather than unrestricted use?

Hello,
I don't know that module.
But AFAIK you can set this in material master record on:
- purchasing view
- work scheduling view
- quality view
BR
Csaba

04 inspection lot with status SPST

Dear Experts,
We are using Handling Unit (HU) functionality in FG material,
1. We create HU's (say 50 HU's) using tcode COWBPACK,
2. On creation of HU, an inspection lot of type 04 is created for 50 HU's.
3. In regular scenario, we do GR of all 50 HU's using tcode COWBPACK,
4. All 50 HU's are posted in to unrestricted & UD is given using tcode QA32 & status UD SPCO.... is updated in inspection lot,
5. The HU posting in unrestricted can be happen before GR also (which observes no problem),
But in rare scenario, we need to cancel / delete the some of HU's at that time following steps are involved -
1. We create HU's (say 50 HU's) using tcode COWBPACK,
2. On creation of HU, an inspection lot of type 04 is created for 50 HU's.
3. HU posting in unrestricted is done for 45 HU's (System status SPST is updated in inspection lot),
4. Balance 5 HU's are deleted from system using tcode HUMO,
5. UD is given to inspection lot & status UD SPST.... is updated in inspection lot.
Now the problem is, after settlement & variance calculation of production order when we try to update status CLSD (Close) in production order the system give an error "Inspection lot 040000XXXXXX for order XXXXXXXX has not yet been completed" this is due to system status SPST is there instead of SPCO.
As the 5 HU's are deleted hence the stock posting can not be completed. Even we can not cancel the inspection lot due to status SPST.
Please suggest how to resolve this issue to update the status CLSD in prodction order.
Thanks in advance,
Leena.

See if these OSS notes help you
Note 622758 - Stock posting cannot be completed (HU)
Note 532946 - HU lots: Status SPST f.stock proposal in usage decision code

UD made but inspection lot quantities in WM are wrong

On the same day, we received two shipments of the same batch of material from a vendor. Inspection Lot A = 119cs. Inspection Lot B = 13cs. A total of 132cs. BEFORE materials actually were placed in WM bin locations, our Quality Group instructed the Receiving department to break down the pallets - and separate goods by Julian Date. (Quality became aware in advance that a certain Julian Date was bad.) The two inspection lots (one pallet each) turned into 6 locations based on Julian and Receiving erroneously scanned all in as Inspection Lot B.
Not realizing this would create a WM problem, Quality made usage decisions on both inspection lots. Is correcting the Actual Lot quantity an option? We can't clear TR Zones. System reports because UD has been made, we can't adjust lot quantities. If I try QA12 to change the UD, I don't see how to reverse it so inventory is Q. Thanks in advance.

Hi Susan,
As the UD = A has already been posted, please can you check if the TR is possible to be cleared and complete stock is posted to unrestricted use stock. Then manually post the faulty material stock form unrestricted stock to blocked stock. This process should create correct WM postings (TR/TO/Confirmation).
Thanks,
Arijit

Return Movement Type 161 and 671 to post it to QI stock

Hi Gurus-
I'm trying to receive against a Return PO and outbound delivery (return), but when I do a GR against a PO or Outbound Delivery, it is doing either 161 or 671 and posting to Unrestricted Use stock at DC from the store.
My requirement is to post it to QI stock at the distribution center when I do a 161 or 671. Can you please let me know if that is possible and if yes, can you please guide me/point me to the right direction?
We are using SAP IS Retail and QM module is not implemented.
Thanks in advance!

Hi Gurus-
I'm trying to receive against a Return PO and outbound delivery (return), but when I do a GR against a PO or Outbound Delivery, it is doing either 161 or 671 and posting to Unrestricted Use stock at DC from the store.
My requirement is to post it to QI stock at the distribution center when I do a 161 or 671. Can you please let me know if that is possible and if yes, can you please guide me/point me to the right direction?
We are using SAP IS Retail and QM module is not implemented.
Thanks in advance!

STO (plant to plant),stock in receiving plant shown in on-order stock

STO plant1 to plant2 ,I have created PO and done delivery in VL10G ,stock is transferring from plant 1 unrestricted use stock to plant 2 on-order stock instead of unrestricted use stock..
kindly suggest..
vipin

Hi,
This is standard functionality. Once MIGO is completed in the receiving plant, stock will be transferred to unrestricted use.
Hope this helps.
Regards,
Sharan

Inspection Lot Stock: Post to GR blocked stock

Hi Experts,
During the IQC process (inspection type 01), first I use the 103 to post the stock to GR Block stock (100 pcs), then after the Usage Decision, I post the stock 80 to unrestricted use stock, 20 remain in the GR blocked stock.
So, the 20 stay in the GR Blocked stock, and what can I deal with them? Manually create a inspection lot?

>
kiran kumar wrote:
> > Dear GR blocked stock is not plant's own stock.It's a non valuated stock and there are no accounting data for GR blocked stock and it is not possible to post GR blocked stock to QI.
>
> Release the GR blocked stock with 105 mvt type.
>
> Cheers
> KK
Dear KK,
The GR Blocked stock could be released to unrestricted stock by the 105 type while doing the usage decision.
However, in this occassion, this 20 is remained in the GR blocked stock by using the "GR blocked stock" field in the Inspection Lot Stock tab of the QA14.
Edited by: Veryhanhan on Dec 18, 2010 9:15 AM

SAP QM - Inspection Lot Stock tab missing in QA11

Hi,
My scenario is raw material inspection and I executed the scenario as follows
Step 1 : Assigned 01 inspect type to the material in QM view .
Step 2 : Created three MIC's
Step 3 : Created Sampling procedure
Step 4 : Created inspection plan for material by assigning MIC's & Sampling procedure to operation.
Step 5 : Goods receipt of 100 Qty for the material through purchase order.
Step 6 : Created Inspection lot for material.
Step 7 : Inspection lot selection for material and recorded the results.Then valuated the results and i reject 2 out of 3.
Now I have to post the some qty to unrestricted use & some qty to vendor i.e return delivery. To do the same, inspection lot stock tab is missing in QA11.
Pls suggest if I missed any thing in this process.
Thanks in advance.
With Regards
Srinivas

Hello NiTiN J,
I will clear the confusion.
As I described the scenario in my first post, I have created inspection lot manually (QA01), then selected the same using QA32, here I had recorded the results & UD also. When I check in MMBE for unrestricted use stock, it is still showing under QI only. Then I identified that Inspection lot stock was missing. So, I started posting in SCN (After searching).
Mean while in the discussions I thought that, I completed RR & UD for the material. Now if any suggestions from expects won't applicable for my query. So, after Craig's recent discussion, for the same material once again I have done the GR through purchase order and created inspection lot manually.
Now I found inspection lot (1st) through Material Document(i.e. MB51 as suggested by Mr.Craig)
In QA32 (2nd) inspection lot, which is created manually.
Now I have two inspection lots for the same material and I have not recorded the results nor UD for these lots. Just created and waiting for suggestions.
And for 1st inspection lot , I tried to do results recording using QA11 also. But system through's error as shown in screenshot.
I think I cleared the confusion.
Pls correct me if I am wrong or missed anything.
With Regards
Srinivas

Inspection Lot Stock Tab - To Be Posted to Unrestricted-Use Stock

Similar Messages

Maybe you are looking for