Inspection report smartform assignment

We have created a smartform for inspection reults printout. Can I assign this smartform to the inspection report print functionality instead of Sap script "QM_INSP_RESULT".
How can I assign the new smartform instead of standard form. Please let me know, or do I have to create a T Code for taking this print out.
Thanks
Vineeth

Hi All,
You can implement the exit  QSS10001 and call your Z smartform from there and then just set
e_exit_activ = 'X' at the end(This will stop standard script ). This will work. Please let me know your further queries regarding this.
Thank you.
Message was edited by: Craig S

Similar Messages

  • Print Bar code for inspection report

    Dear all,
    I have a requirement for printing bar code in the inspection report. Normally, we use QGA3 print inspection report which based on the script form. Now as I would like to add bar code, as I know, I have to use smart form to realize. but it can just enter Form in the standard way. So could anyone give me some useful suggestion to realize this requirement?
    Thanks a lot.
    Best regards,
    Benny.

    Hi,
    Identify corresponding form.In the character format we have to define the bar code and assign that one infornt of which we need the bar code.
    eg:
    SE71 screen if you go the character
    there below you will get the bar code
    specify one character for that bar code and
    in place of which u want to print place it.
    for eg u have character specified as bb,
    and in place of Inspection lot (w_lot) you want to have bar code
    the just type.
    <bb>w_lot</>, this will print the bar code for instead of inspection lot
    Regards,
    Krishna Mohan
    Edited by: Krishna Mohan N on Jan 22, 2008 7:26 AM

  • Inspection report Form QM_INSP_RESULT -result printout Error ( 626109 / 201

    in QA32 Transaction when we are printing Inspection report in English
    langauge Form QM_INSP_RESULT -result printout there is an error
    "Text element does not exist" and it is giving ABAP dump
    I have Test all below steps - Log on SAP in DE  - works fine in DE
    Did anybody faced similar issue?

    Hi All,
    You can implement the exit  QSS10001 and call your Z smartform from there and then just set
    e_exit_activ = 'X' at the end(This will stop standard script ). This will work. Please let me know your further queries regarding this.
    Thank you.
    Message was edited by: Craig S

  • Inspection Report

    Hi
    inspection report (standard report) which we can see in qa 32 after UD shows lots of parameters like
    -Status process completed
    -to be inspected 4*100 ea
    -attributes result is valid
    and others
    could we skip these or some of the details from this report ??????
    or can we add some parameters / information in this report?????????
    is there any option and from where we can do this ?????????
    regards

    Hi,
    the printout comes with the help of SAPScript "QM_INSP_RESULT".
    In this SAP Script, you can do the necessary changes by copying it and making it workable for you with the help of ABAP/technical consultant.
    Then re-assign your own SAPScript form while printing the inspection report to get the desired parameters instead of standard SAP Script.
    Thanks
    SUMIT
    Edited by: Sumit Gupta on May 20, 2010 5:02 AM

  • Mass change in Inspection lote, when assigning UD Code.

    Dear all,
    curently we are facing an issue of having to mass change inspection lotes when assigning UD code.
    The senario is as follows:
    using the tcode QA16 I can mass assign UD code for various inspection lotes using the option "in background". The requisition of the client is, however, to enter also a description text, for all the lotes treated. I an use the tcode QA16 and run a UD manual option, that lets me enter a long text for each inspection lote, along with assigning UD code. That is not acceptable, since there are daily hundrets of lots, we are talking about. That makes the manual option very time consuming.
    Anyone had a similar issue? What I am looking for here is some exit, or other type of solution that allows me basically replicate the long text (the same for all treated lots) for various lots automatically. I was thinkig of QA16, making some necessary adjustments, but I not sure if it will serve for this purpose.
    Any suggestions will be highly appreciated,
    best regards,
    Anna

    Hi,
    I think you would need to go for BDC to achieve this. Since this is required on daily basis, you should run BDC to enter the long text against the UD for each batch. This should work.
    ntn

  • About Inspection Report

    Hi experts,
    I want some changes in Standard Inspection Report as customer no is not there.
    how do i find sales order number of material and add cust. no(sold.to.party) through sales order .
    Is it possible to place custmer in case of material is semi finished ?
    Thnxs for solution in advance
    Regards,
    Swapnil Vaidya

    Hi,
    Look into QAMV table.
    This thread may also help
    /thread/445395 [original link is broken]

  • Transport of 'Report category Assignment' for LDB - PNP

    Hi,
    I am using LDB - PNP for a HR report. The screen works fine in the development server.
    Once Transported to Quality and Production servers the screen changs to something else completely. 
    <b>I see that HRIN0013 under 'Report category Assignment' ( found in Attributes of program ) is not transported to
    to quality server. How can transport HRIN0013  to
    to quality server? </b>
    I have used 'Report category Assignment'  X__X2201 and it works fine.
    I need your assistance on this. Help will be highly appreciated.

    Hi sanchit,
    1. This report category HRIN0013
       must be a sap standard report category,
       which must be a part of the LDB program.
    2. Just check out in your QA and production servers,
      whether this HRIN0013 is available for
      selection or not,
       in the same screen, u mentioned.
      ie. se38 -- 'Report category Assignment' Button
      ( found in Attributes of program
    regards,
    amit m.

  • Inspection report layout form default

    Hello Gurus,
    We had created the new form for out inspection report on qa32 and trying to default the new customized form in result printout screen but unable to do the same. Again and again I need ot select my variant to get my new form even I still use the username as a variant.
    I tried with variants to default it but not working .Is there any config to default the new form ?
    Akash

    Hi
    Read following may help you
    You called up report RQGAAM31 to print out the inspection report. However, variant I_TYP_01 is not maintained in this report for inspection type 01.
    For report RQGAAM31, you can set up the variants in such a way that they are automatically called up, regardless of the inspection type.
    For example, variant 'I_TYP_01' stands for inspection type '01', variant 'I_TYP_05' for inspection type '05' etc.
    When you maintain the variants for the inspection types, you can control which layout set is to be used, for example.
    If the printout is not to come from report RQGAAM31, then you can activate the appropriate customer exit (enhancement QSS10001) and with this, call up another report.
    Regards
    Sujit

  • Print out of Inspection report and Certificates

    Hi Gurus,
    I want to take inspection reports and certificates printout.
    Is there any standard transaction other than QGA3 and QC21
    Please let me know
    Thanks and Regards
    Hari

    Hello Hari,
    You can take the certificates printout with QC21 or QC22 (as applicable). What information you are looking in inspection reports ? Then we can suggest the appropriate set of the reports
    Cheers
    Kaushik

  • Job Work - Party's inspection report

    Dear All,
    We are into process industry
    We are receiving material with Party's Quality Inspection report for Job Work.
    We are also doing quality inspection in our lab. Results are recording using QA32.
    Now our requirement is :
    1. We also want to insert Party's Quality Analysis. 
       During MIGO, in Batch classification, we can enter batch characteristic.
       Is advisable to input during MIGO?
    2. Based on this input we want to compare party's analysis  and our analysis.
       Is there any report available?
    Thanks in advance
    Nirav

    Hi
    The classification tab in MIGO will also allow to enter characteristic results. You can view these results in MSC3N against the batch. But if 01 is active and lot is created in QA32 for RR, the results are overwritten by the last recorded result in worklist.
    So this classification is mainly useful if you dont want inspectiion lot to be created but want to record vendor results.
    As FF explained, ou can maintain different operations. Or you cam make an inspection plan with MICs like Dia_act (result of testing done at your end), Dia_Ven( result by vendor) and dia_diff( Calculated char defininf difference between actual and vendor data).

  • Printing of Inspection Report After Usage Decision

    Hi,
    I want take the print out of Inspection Report after Usage Decision completed.......... Can you plz guide the complete Confiuration & related transaction codes for this........
    Regards,
    Raghunath

    Inspection report can be printed from QA33 t_code.
    There are some pre requesites for this,
    i)   In material master 'Inspection with task list' and 'Check characteristics'  should be activated.
    ii)  Inspection plan for that material should be present.
    iii) Record results for these inspection characteristics and take Usage decision.
    iv)In QA33 t_code, u can see 'inspection report tab' . click on that tab.
    v) Give output device and see print preview.
    U can see inspection report with all details.
    Plz. revert back

  • Editing Inspection reports in recording worklist before UD but after saved.

    Hello,
    I am completely new to all of this and while i think sap is amazing and wonderful I am totally overwhelmed.
    I am currently entering inspection report data into the results recording worklist. I cant seem to get a straight answer on how to edit these results after they have been saved but before the UD has been accepted. I know once it has been accepted you cant change it. The window is closed for me to unlock it and change. I move too fast sometimes and saved before editing.
    Any help is GREATLY appreciated.
    Jessica

    On QE01 select the desired characteristic and click on the "Put in process" button. By this means system will re-open the characteristic for edition.

  • QA32 - Print Inspection Report

    Hi,
    We created a user for QM, and we assinged him the
    permission for QA32, QA02 & QA11.
    When we excecute QA32, we are not able to view the Print Inspection Report button.
    How can we get the same?
    Regards,

    hi karn
    Welcome to SDN forum.
      i think you have to give the authorisation for <b>QGA3</b>,
      if not after executing trx <b>QA32</b> immd. enter trx <b>/nSU53</b>
    it will display the missing authorisation so that u can
    give that authorisation.
    Hope it helps.
    Reward with points if it is helpful.
    Regards
    Alfred

  • Inspection report uploading

    Hi,
    How can I upload incoming inspection report send by vendors in SAP.
    Case 1: Soft copies which are received from vendors needs to uploaded with reference to inspection lots, incase of material subjected to inspection.
    Case 2: Some materials may not be subjected to inspection and in this case also reports needs to be uploaded.
    Please suggest how to handle this requirement. DMS is already available.
    Thanks
    Vineeth

    If you are purchasing the materials you can use the incoming certificate functionality.  This allows the cert to be scanned and saved as a PDF and linked to the purchase documents.  (see QM>Quality Certificates>Incoming).  Transaction is QC51.  The reference to would be via purchase order number to inspection lot than.  The purchase order number is reference in QC51.
    You can also use the services for object and upload a pdf file and attach it to the inspection lot directly.
    FF

  • Management Report - Cannot assign an empty string to host variable 10

    We ran a Management Report for the first time after completing the User/Role/Profile Full Sync and the user/Role/Profile Batch Risk Analysis.  The job failed with the following error:
    Oct 16, 2008 12:13:29 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
    WARNING: Exception in Management Report Job: Cannot assign an empty string to host variable 10.
    com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
    We are on GRC 5.3 support pack 4.  Has anybody encountered this error? What does host variable 10 refer to?

    I checked our USOBT_C table and we have a lot of empty values. If this is allowed to be empty in SAP and this is the table that is uploaded into CC, why would all the fields in CC tables then be defined as NOT NULL?  We suspect that since we had uploaded USOBT_C under 5.2 and if this had been an issue before, it may have been corrected when we upgraded to 5.3 but then the old data is still in our system. Is there an easy way to get around or correct this?
    Thanks.

Maybe you are looking for