Instagram not loading after I tap it (iPad mini)

Hi there..
So something really bizzare happened to me with the recent instagram update.
I used to use instagram all the time perfectly fine on my iPad mini. However, after the update, it won't even open after I tap it. The icon turns dark, then goes back to normal and nothing happens.
It's working fine on my iPhone 5.
I even tried going back to my computer and plugging in the iPad to install it from there again, same thing...
Any ideas?

First, try restarting the iPad and see if that makes a difference.
Next, press and hold on the icon until it starts to shake, then tap the "x" to delete it. After that, head back into the app store and redownload it directly to the iPad.
http://support.apple.com/kb/ts1702

Similar Messages

  • Safari not loading and quits unexpectedly on iPad Mini

    Safari just randomly stopped working on my iPad mini. It behaves as if it is frozen from the moment it launches.
    Everytime I open Safari (directly or through links from Mail, FB etc.), it won't load and non of the buttons are working, it looks like it's frozen then will just quit unexpectedly. I tried going to Settings > Safari and it won't even load anything about Safari. Then Settings will just freeze and I won't be able to access any other options on it. I can still go in my home page by simply pressing the Home button. I have to close Settings (double clicking Home button then closing the app from there) before I can access it again. As long as I don't select Safari in settings, I can still navigate and change anything while in the settings.
    Everything elses works in my iPad Mini. Safari and Settings being frozen doesn't seem to affect any other apps.
    I tried everything that I know and was suggested here:
    Settings > Safari > Clear History and Clear Cookies and Data --- not even loading and will just freeze as soon as I select Safari in settings.
    Settings > iCloud > Turn off Safari --- stuck on "Turning Off Safari Data..." screen - had to force quit settings to access settings again
    Restarting iPad by completely shutting it down.
    Closed all apps, then restarting iPad by holding Power and Home button.
    Reset iPad settings by going to General > Reset > Reset All Settings
    DFU mode and Reinstall iOS 7
    None of these worked and Safari still behaves the same way. It was working before and has been for a while when I updated to iOS 7 originally. I can't think of anything that I installed that would've cause Safari to not respond except for the most recent update of iOS 7. But it was working then until recently.
    I can install Chrome and still have a browser but this is really frustrating especially because any links that I click on is directed to Safari.
    Please, any other suggestions and help will be greatly appreciated.
    I think my last option here is to drop by in the closest Apple Store and have them troubleshoot it there. Luckily I still have warranty on it so I can still have it exchange if it can't be fixed.
    Looking forward on hearing from you guys..thanks!

    Same issue, on an iPhone 5 on iOS 7.0.4 (11B554a) that's been working fine for months and hasn't had a recent iOS update. Safari freezes on open, Settings / Safari won't load, but everything else is fine. Safari had half a dozen pages open when it stopped working. Resetting multiple times didn't work, restoring the phone via iTunes from iCloud backup didn't work, clearing Safari date from Settings / Usage didn't work, and I didnt have an iTunes backup to restore from. Phone is unable to turn off Safari data under iCloud, whether choosing o leave it on the phone or delete it, and is unable to delete all iCloud data as I try to unhook it from iCloud altogether; it just keeps spinning on Turning off Safari Data... or on Deleting... . Frustrating as ****.

  • Ipad Air not loading after downloading ISO 8.3

    Ipad Air will not load after downloading  ISO 8.3.  I cannot get to the home screen before it crashes and go to apple logo and starts downloading again

    Hi, is your issue the same as what's reported here?  Anyone else seeing issue with iOS 8.3 update on iPad Mini 3?

  • I have loaded ios 7 onto my ipad mini  now it is locked  it s=asked for a pass code ihave never had a pass code on this device so tried my apple pass word  Locked out! itunes says not eligible when i try to re load!!

    I have loaded ios 7 onto my ipad mini  now it is locked  it s=asked for a pass code ihave never had a pass code on this device so tried my apple pass word  Locked out! itunes says not eligible when i try to re load!!

    Hi MaraAndKaid,
    This article has steps you can take when you're unable to remember your passcode to get things back on track:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Take care!
    - Ari

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • Site does not load after some minutes of creation or after restart the server

    Hello,
    I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
    Backed up the production web application's content database: Prod_WSS_ContentDB
    Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
    Created a new web application in test environment with a new content database.
    Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
    Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
    Mount the Prod_WSS_ContentDB databe to the web application with powershell:
    Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
    Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
    and the site loads exactly as the production environment.
    But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
    http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
    as expected, but the site does not load, the browser just show a complety blank page.
    The Central Administration site loads normally.
    Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
    then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
    For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve  this?
    The error is:
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          6/27/2014 2:44:22 PM
    Event ID:      5586
    Task Category: Database
    Level:         Error
    Keywords:      
    User:          UCETEST\spaccount
    Computer:      TESTSP01.ucetest.edu.do
    Description:
    Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
    A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>5586</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>3</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
        <EventRecordID>4742</EventRecordID>
        <Correlation />
        <Execution ProcessID="1688" ThreadID="1692" />
        <Channel>Application</Channel>
        <Computer>TESTSP01.ucetest.edu.do</Computer>
        <Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
      </System>
      <EventData>
        <Data Name="int0">-2146893055</Data>
        <Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
      </EventData>
    </Event>
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

    Hi,
    According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
    Please make sure you create a test environment for existing production site correctly.
    Here are some great articles for your reference:
    Moving content between SharePoint environments
    Copy SharePoint production data to a test environment
    Build a SharePoint 2010 Test/Development Farm
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support
    Hello Linda Li,
    I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

  • Aperture 2.1.4 update will not load after Snow Leopard update

    Has any one found the fix for aperture 2.1.4 update not loading after the installation of Snow Leopard. I to am also getting the alert "aperture 2.0 or later is required to install the update". I installed my copy of aperture 2.1 using the installer with no problems so the program is in the correct location. I've seen the posts related to this problem and it does not seem a fix has been found.

    Just ran into this myself. I did check to see if there was a preference to delete under ~/Library/Preferences and one is not created since 2.1 is never actually launched. 2.1 is sitting in the root of Applications and hasn't been renamed, but the 2.1.4 update just doesn't detect that it is there and just gives the alert "Aperture 2.0 or later is required to install this update."

  • The webpage does not load after pressing enter or CTRL+ENTER. My OS is Windows 7 Ultimate

    I have tried installing the older version Firefox 3.6. After entering the URL on address bar it does not load after pressing enter or CTRL+ENTER

    This issue can be caused by an extension (AVG Safe Search can cause this) that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • The app store will not load after downloading Mountain Lion.

    The app store will not load after downloading Mountain Lion. Anyone else having this problem. It works on the the admins acount on the computer but none others. All of the parnetal controls are off and it doesnt work. All i get from the app store is this.

    Yes. I have done everything. restarted, made sure there are no funny blocks or no permissions

  • PE 9 will not load after installing Elements 10

    Installed Elements 10 on Vista 64-bit.  Did not uninstall Elements 9.  Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk.  There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2.  Tried disk 2 of 3 from package, nothing happens.

    Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
      From: Steve Grisetti
      Sent: Monday, January 02, 2012 7:09 PM
      To: cptiger
      Subject: PE 9 will not load after installing Elements 10
            Re: PE 9 will not load after installing Elements 10
            created by Steve Grisetti in Premiere Elements - View the full discussion

  • I can not play a video on my iPad mini. It will load but won't play

    I can not play a video on my iPad mini. It will load but won't play

    Which video, in which format, trying to play how in the Mini?

  • 10.2.8 Finder does not load after getting into OS X

    I am pretty sure this happened to a lot of people, as I have read many many messages on this issue.
    My computer is a Powerbook 867 with 128built in DDR and 512 added.
    40Gb internal HDD and a 40GB firewire 3G ipod (the old 3G).
    Here's the problem:
    Last night just when I finishsed watching some divx on VLC running on 10.2.8, I quitted VLC using apple+Q, then closed the finder window i opened with apple+W. They both closed, but then the finder just did not respond (or have quitted). There isn't a little triangle below my finder icon on the dock. Everything else on the dock works perfectly fine. Desktop icons have disappeared.
    Now I have restarted, nothing helps; went on apple discussion and found some "HELPFUL" solutions - deleting the finder preferences. First how was I suppose to delete it? ok... I installed a 10.2.3 on my ipod and boot it through there, also did a repair permission on my internal HDD. Finally deleted the com.apple.finder.plist.. So I booted up using my internal again. But still... finder DOES NOT LOAD after I got into my OS X.
    Please if anyone can give me a solution to this problem!
    P.S. the finder on my ipod is working fine. AND I do not want to reinstall OS X on my interal because I only did it last week after it went to service after a HDD fail (it has been replaced).
    Powerbook 867Mhz 128+512MbDDR   Mac OS X (10.2.x)   10.2.8

    Check System Preferences - Accounts
    Choose you account - login items: If iTunesHelper
    shows up - remove it it will prevent re-installation.
    It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
    Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
    Eric
    Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

  • Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

    I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
    Thank you.

    Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
    Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
    Thanks again.
    John

  • Usb hard drive not loading after security update

    usb hard drive not loading after security update
    I can't seem to find any other posts about this problem.
    I have three external hard rives connect by a USB hub to my iMac.
    Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly. 
    I get the same issue but not all the time if I turn them on before I boot the iMac.
    I used the disk drive utility to "repair" the drives but they always come back as "probably ok". 
    If I restart the iMac with the drives connected (on), it seems to work but not all the time.
    A bit annoying as I am wondering if the drives are OK or not.
    I don't always need the drives as they are for backing up images from my camera using Apreture.
    This all began after i did the latest security update.
    is the update to blame?
    mahalo.

    Yes, you can still use those instructions to reset the PRAM.
    You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
    Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

  • Itunes is not loading after i've updated to ios7. What do i do?

    Itunes is not loading after i've updated to ios7. What do i do?

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

Maybe you are looking for