Installation for Solaris 10

Greetings all...I'm not sure where this is supposed to go so I figured I'll start here since I technically am new to java, hehe... New meaning new to the Solaris installation of Java, specifically in regards to downgrading the JDK/JRE from 1.5.0 (latest as of the 6/06 release of Solaris 10) to 1.4.2_12.
More detail:
We have four T1000s and four T2000s, all with Solaris 10 6/06 installed. Apparently, the latest 1.5.0 release of java is installed and used by default (java -fullversion shows 1.5.0_06-b05). JRE 1.4.2_11 is also installed but since then, 1.4.2_12 has come out and the developers that are going to be on this machine absolutely demand 1.4.2_12.
For those familiar with Solaris and pkgadd/pkginfo/pkgrm, I'm looking to A: remove 1.4.2_11 and 1.5.0_06 and B: put in 1.4.2_12. I've done both the self-extracting .sh script as well as the packages but when I run that version of java, it comes back with the following error:
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
I've looked everywhere I can think of to fix this but I'm at a loss now. Anyone have any ideas? Not sure what PATH variable I'm supposed to have. Thanks in advance!

Greetings all...I'm not sure where this is supposed
to go so I figured I'll start here since I
technically am new to java, hehe... New meaning new
to the Solaris installation of Java, specifically in
regards to downgrading the JDK/JRE from 1.5.0 (latest
as of the 6/06 release of Solaris 10) to 1.4.2_12.
More detail:
We have four T1000s and four T2000s, all with Solaris
10 6/06 installed. Apparently, the latest 1.5.0
release of java is installed and used by default
(java -fullversion shows 1.5.0_06-b05). JRE 1.4.2_11
is also installed but since then, 1.4.2_12 has come
out and the developers that are going to be on this
machine absolutely demand 1.4.2_12.
For those familiar with Solaris and
pkgadd/pkginfo/pkgrm, I'm looking to A: remove
1.4.2_11 and 1.5.0_06 and B: put in 1.4.2_12. I've
done both the self-extracting .sh script as well as
the packages but when I run that version of java, it
comes back with the following error:
Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object
I've looked everywhere I can think of to fix this but
I'm at a loss now. Anyone have any ideas? Not sure
what PATH variable I'm supposed to have. Thanks in
advance!No idea at all, but I'm just wondering how it managed to instantiate a NoClassDefFoundError, since it extends java.lang.Object ^^
there should be some silly explanation I'm not aware of...

Similar Messages

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Wu-ftpd installable for solaris 10 and solaris 9

Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
Amudha

Hi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha

OSB 2.6 installer for solaris 10 (64 bit) - required

Hi,
I am are not able find the installer for OSB 2.6 for solaris 10(64 bit).
Where can I find the same?
Thanks in Advance.
Rajani

Don't know what a service id is, but you will need to be an oracle customer, which I assume you are if you are requesting old software.
here is the link I use
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:5775706955868202591::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,763603.1,1,1,1,helvetica
cheers
James

OC4J and BC4J Runtime installation for Solaris (Unix)!

We have successfully installed, configured and deployed JSP/BC4J apps using OC4J and BC4J on Windows NT/2000. However, our production environment is Solaris.
We have installed OC4J on Solaris, with some difficulties. How/where is the installation process for the BC4J Runtime Installation? The download (bc4j-ojsp.zip) for this utility is Windows only.
Is there a method or process to install BC4J Runtime on Unix? If not, we are stuck.
We cannot use JServ (servlet limitations) and refuse to use OSE (to many issues).
Any guidance or assistance would be greatly appreciated...
JDeveloper 3.2.3
iAS 1.0.2.2
Solaris 8
JDK 1.2.2_08 (Unix)
Dean

Stephan,
I have located multiple "connections" files and will remove all but the default located in the OC4J classes directory. We have been developing with JDeveloper and it often created multiple connections files that appear when you "jar" project components.
We also installed JDK1.2.2_008 and are using this. However, when I use the classpath method of starting OC4J, I receive numerous errors. Using the jar method, everything works, with the exception of BC4J apps. I'll have to look into the errors more.
Thanks for the response. At least I know one other person (organization) is using this successfully. I hope to join the "success" crowd tomorrow!
Thanks again...
Dean

XML Publisher 5.6 Standalone for Solaris

When will this version be ready? I see the Windows and Linux versions are already t here.
Message was edited by:
naveeny

Hi Naveeny,
You can download any of these installs. It contains manual installation instructions that explain how to install on any platform. We currently do not plan to have an installer for Solaris, but I install most of the time manually myself. The installer installs its own oc4j instance and jdk.
If you want to deploy on any existing application server you need to deploy manually anyway. Just download the cd unzip and read the install.htm or install.pdf.
Hope that is acceptable to you.
Klaus

JDK 1.5.0_08 for Solaris 10 Intel 64 bit

Hi,
I need the JDK 1.5.0_08 installation for Solaris 10 running on an Intel 64 bit machine.
I searched the Sun site for this but I can't seem to find it and I don't know if it exists.
Ideally I require JDK 1.5.0_08 but if it doesn't exist I can move up versions.
Any ideas?
Thanks
Martin

http://java.sun.com/products/archive/

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

No Disk meet the criteria for Solaris installation

Hi all, I have a problem when trying to install Solaris 8 (Intel) on my PC. There are some funny things happened while installing the OS.
1.) My motherboard does not support booting from CD-ROM, so I downloaded a Device Assistant Boot Disk to boot it up. Then I use dd.exe to make the boot disk from the image, I have tried many times that after creating the boot disk, this boot disk will contain 512 bytes of bad sector. So why?
2.) After using this boot disk to boot up and install the OS, before entering to the detection of the bus type stuff (still on the white screen), at the bottom of the screen, it says "ata_command select failed ... ...", what does this mean?
3.) When the system go back to the white screen with language selection, I choose English (which is 1), and the system try to find my hard disk, but it failed and says "No Disk meet the criteria for Solaris installation" with a new line saying "installation documenation found.". So what is happening?
Appreciate for any help.
Wallace

Did you check that your adaptec scsi controller is
supported by solaris and/or has a working driver
(from sun or adaptec) ?
Here's the HCL for solaris 8 x86:
http://soldc.sun.com/support/drivers/hcl/8/401/BOOK.htm

Hardware Requirement for Solaris 8 Installation

Hi,
Can anyone give me the hardware requirements for Solaris 8 Installation. I need to install the following patches too..
C++Runtime 108434-12
Linker 109147-21
J2SE Solaris8 (patch cluster)
SUNWxwfnt (X Window System platform fonts)
SUNWilof (ISO-8859-1 (Latin-1) fonts)
Please help.
Regards
Aparna

Check out http://docs.sun.com/app/docs/doc/806-1054 for the HCL for the intel version of Solaris 8.
or http://docs.sun.com/app/docs/doc/806-2221-10 for Sparc hardware.

Link to download X86 Solaris Installation for weblogic 10.3

Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.

Hi;
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
WebLogic 10.3 availability?
Also check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios

CONTROL SYSTEM REQUIREMENTS FOR SOLARIS 10 INSTALLATION

Hello, I wish to use the OPEN SOURCE version of Solaris 10 and I whether, as I read in the network, there is a software that allows me to
check whether the system requirements of my PC support the installation of Solaris 10 and if all the devices on my PC support, without any updating drivers, this installation.
Also, if possible I would like the link that allows me to download this software.
Thank you for your kind attention.
Sincerely.
PELO.

The HCL site from Sun: [http://www.sun.com/bigadmin/hcl/|http://www.sun.com/bigadmin/hcl/]
Particularly look for Sun Device Detection Tool
You can download OpenSolaris from [http://opensolaris.org/index.html|http://opensolaris.org/index.html]

How to get the free space from logical drive for solaris installation?

Hi.. I am using win-xp.In the extended drive I have freed 10gb by deleting one of the logical drives.I wish to know how to proceed for solaris installation in the space available with out disturbing the data in other logical drives.Is there any tool?

Hi,
See: http://www.sun.com/software/solaris/self_help.jsp
At the bottom of that page, FAQ # 3
HTH,
John

WL 7.0 for Solaris - Installation problem

Hi
I am trying to install WL 7.0 with SP2 for Solaris which was downloaded from the
BEA Download Center.
The following is the extract of the error :
==============================================================
$ ./server702_solaris.bin
** The directory "/var/tmp/" does not have enough space for extraction.
Please input another directory: /opt/utl/tmp
Extracting 0%..................................................................)
.100%
** Error during extraction, error code = 2.
=====================================================
what could be the problem?
Thanks in advance
Regards
Ramkumar

"Ramkumar" <[email protected]> wrote in message
news:3ee5d2ca$[email protected]..
>
Hi
I am trying to install WL 7.0 with SP2 for Solaris which was downloadedfrom the
BEA Download Center.
The following is the extract of the error :
==============================================================
$ ./server702_solaris.bin
** The directory "/var/tmp/" does not have enough space for extraction.
Please input another directory: /opt/utl/tmp
Extracting0%..................................................................)
100%
** Error during extraction, error code = 2.
=====================================================
what could be the problem?The installer is actually a self-extracting Zip-archive. It tries to unpack
itself into /var/tmp/something-random, before starting the actual
installation.
If you do not have enough free space in /var/tmp, try creating a temporary
directory somewhere else, move the installer into the new directory, and do
an 'unzip server70..............bin'. Once you have unzipped the installer,
I think you can look in a file called AUTORUN or something for the java
command to run the installer manually.
Good luck,
Jan Bruun Andersen

BC4J runtime installer for Sun Solaris

Hi,
I dont know where to find the right release for BC4J runtime installer on Solaris OS.
i have installed :
1 - Oracle 9iAS 1.2.2.1 on Solaris
2 - OC4J Containers for J2EE Applications
And i would like to deploy my application developed under Jdeveloper9i using BC4J.
i find this link http://download.oracle.com/otn/nt/jdeveloper/bc4j-ojsp.tar.gz
but i wonder if this is the right version for Solaris and not for NT.
thank you very mutch

yes, it is working on solaris, thank you very mutch sir.
i still have a problem with the dployment on BC4J project on 9iAS (Solaris ).
i have tow projets under my worspace. the first one contains all my BC4J and the second contains the client (JSP pages ).
i need exactly a clear procedure to deploy my extranet.
Thank you for your help.
EL Bachir.

Installation for Solaris 10

Similar Messages

Maybe you are looking for