Integration between OM & Time Management.

Hi,
What is the integration between OM & Time Management.
Regards
Rajesh

Hi,
OM to Time mangement integration will be happens with Shift planning, and with position substitution.
With shift planning:
PEINS PZTEF - ORG. EMPLOYEE STATUS FROM TM
PEINS VARTI
PEINS VARTS
PEINS VARWI
PEINS AWART - WITH ATTENDANCE
With subsitution infotype:
IT2003.
Regards
Devi

Similar Messages

SOA Integration between FS-Account Management and Bank Analyzer under BS 8.0

Hello all, we have set up the soamanager i.o. to integrate account manager and FS-business partner with the Bank Analyzer under Release 8.0 For the business partner this works fine. For master data of the current accounts we encounter the following problem:
We have configured the soamanager on the consumer side installing the consumer: BankAccountContractProcessingCurrentAccountContractEventOut On this side we would like to use message type: CurrentAccountContractFSCreatedBulkInformation_V3.
However the consumer (account management) provides CurrentAccountContractFSCreatedBulkInformation_V2 only, which is the xml-formate for Release BS 7.0.
Can anybody tell me, how to configure AM (consumer side), such that it provides the correct xml-formate for Release 8.0. For more information please refer to the document: IOA_technical_configuration_19. For further info on soamanager-config refer to the appendix.
Thanks, Sebastian Sachse

hi Sebastian
please refer to Katja Bornschein ([email protected]) as the owner ot the IOA-Scenarios. She will give you the information needed. As far as I know '_V3' is used only in FSAPPL500 (Release 9.0, GA in November 2014)
BR, Ernst

Integration between Time Management and Payroll

I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas...
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
still its not integrating with Time Management
what is that I want to do to integrate time management with payroll

Payroll is not integrating with Time Management
In Log I can see No Time Management Integration
I configured Time Management and Payroll....
Before It created a problem in time management in absence quotas... it throwed an error in DAPPR
for testing payroll I deactivated schema DAYPR that is time data processing....
Generated absence quotas correctly
Now I activated DAYPR still in display log i dont see any integration with time management....
I changed the time management status to 7 and 9
Payroll is running with out time management
still its not integrating with Time Management
l

Key difference between Negative & Positive Time Managment

Dear Consultants,
Please provide the information regarding the key differences between Negative Time Management & Positive Time Management.
Under what circumstances, we shouldn't recommend for Positive Time Management?
What are the major challenges for the client/end-user in using Positive Time Management?
What would be the duration required to implement Negative TM?
What would be the duration required to implement Positive TM?
What are the limitations of Negative TM?
Can a client opt for both Positive & Negative TM?
Regards,

See the re
Please provide the information regarding the key differences between Negative Time Management & Positive Time Management.
Time Management can be bifurcated types:
1. Positive Time (+ve Time) ? Positive time is plays the total role of workflow. All the processes related to time are automatically gets executed in the background. E.g., in our case it is done only partially to validate the attendance as per punches and other documents with shift timing and generate absence automatically in case of any discrepancy.
2. Negative Time (-ve Time) ? Where the all time related activities like validation of the attendance, posting of absence for wage deduction etc are done manually. It has less level of integration among the different components of time management.
Negative Time Recording:
1. Records time deviations to Planned Working Time
2. Valid deviations include: Absences, Special Absences, On Call Duty, Overtime, Substitutions, Time off in lieu
3. Deviations are manually entered according to type & duration.
Positive Time Recording:
1. Records the attendance time of the employee
2. Records the deviation times of the employee
3. Valid attendances include: Training, Business Trips, Seminars, Overtime.
4. Attendances & deviations can be entered either:
- Front end system
- Manually.
Positive Time Management we have two types of recordings:
1. With Clock times - Complete time recording is captured
2. With out Clock times - Only Number of hourse worked is captured
Negetive time Management:
1. No clock times and assumed employee is working unless and until his or her absences are entered.
How is the process of getting data from time recording system to SAP how can we connect time recording system to SAP? How do we interface for positive time management?
To simplify:
We can consider two independent systems:
1. SAP System which contains Planned Working time
2. Time recorder system which contains the actual timings
Now as Time recorder system will contain all Clock in & Clock outs, the data needs to be uploaded to SAP system either as Scheduled job at back end or online in critical cases.
Based on our Time pair and other IMG settings in SAP System and comparison of IT2011 with IT2000, it generates values of OT,Absences etc etc.
This job can be effectively done in proper coordination with Basis, ABAPers and Time Consultants.
Under what circumstances, we shouldn't recommend for Positive Time Management?
>>>If the company has only salaried employees /exempt empls, where you dont record their OT, DT, etc..
>>>If Company has already another system which records time and can provide just total hours to be paid off in Regular / OT/ DT and also could update quotas
What are the major challenges for the client/end-user in using Positive Time Management?
>>>Integration between 3rd party system and SAP - Interface, logics
>>> Accruals and Quota
What would be the duration required to implement Negative TM?
>>> Few months *
What would be the duration required to implement Positive TM?
>>> Depends on volume diversity you have in time recording. May be between few months to a year.
What are the limitations of Negative TM?
>>> Detailed reporting may not be available in SAP and Posting Timesheets to CO/Billing would out of scope
>>> Also refer to SAP documents and presentation by clients in market place for more details
Can a client opt for both Positive & Negative TM?
>>> Yes you can

Difference between a positive time and negative time management.Explain with screenshots.

Hi gurus!
I would like to know the difference between Positive time management and negative time management.
thx & regards,
raju

Hi Nagaraju,
I am adding more information..
Whether or not an employee is on positive or negative time is determined by the time management status on IT0007. Status 1 or 2 = positive time; status 9 = negative time.
In a standard system, positive time recording means the employee is required to record time (absence or attendance) for any day on which he is scheduled to work according to his generated work schedule. Negative time recording means an employee does not need to record time unless he has an exception to his normal working time; so absences are typically recorded as well as overtime or time work on days for which the employee is not scheduled to work.
Schema TM00 is used to process positive time employees for whom clock times are entered; that is, every record has a start and end time.
Schema TM04 processes both positive and negative time employees. The key distinction between TM00 and TM04 is TM04 does not require start and end times on every entry. Records with start and end times cna be processed in TM04. However, the records do not require these entries.
In TM04 you will see code using IF, ELSE, ENDIF statements during the import process to separate the import of time data for positive and negative time employees.
Positive time employees use the following data import statements in the schema:
P2011 Import IT2011 records to TIP; regardless of whether the EE has IT2011, load the work schedule to TZP. If no IT2011 record exists, TIP is empty.
P2001 Load absences
P2002 Load attendances
Negative time employees use the following data import statements:
P2000 This is the critical difference between positive and negative employees. P2000 loads the daily work schedule to the TIP table as if the employee workede; that is, if the employee is scheduled to work from 8:00 to 17:00, this record will now appear on TIP. The work schedule details are also added to TZP.
P2001 Load absences -- to pick up exceptions to planned working time
P2002 Load attendances -- again to pick up exceptions, special costing information, overtime, alternate payments, premiums or any other variation from normal schedule work.
So if you want to determine if you are using positive or negative time, check the time management status on the employees.
Regards
Siva

Lync 2013 integration with Avaya Communication Manager Version 5.2 and Avaya Session Manager 6.3

Hi Team,
I have a situation, We have done integration between Avaya Communication Manager Version 5.2, Avaya Session Manager 6.3 and Lync 2013.
I’m able to make lync to lync call via extension number but not lync to avaya extension vice versa and lync to mobile calls. Will appreciate your help.
A PBX gateway has been marked as less-preferred.
Gateway name: sm.contoso.com
Response Code: 400
Consecutive Failure occurrences: 29
Cause: The gateway responded with the same failure response multiple consecutive times and is being marked as less-preferred.
Resolution:
Verify that the gateway is functioning correctly.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

Time Management Status

Hi Experts,
Im relatively new to this fourm, and also to Time Management Module.
We are implementing Negative Time Management for our client.
Have a clarification with Time Management Status.
I have suggested '0' to be defaulted as it is going to be Negative time management.
Just for my understanding would like to know the difference between the time management status 0, 7 & 9.
Also we have LWOP and Holiday Wages in place.
your expert answers awaited...
Cheers,
Sri...

Indicator 0 or BLANK:
The employee's actual times are not recorded, and his/her time data is not accounted using the time evalulation program.
Indicator 1:
The employee's actual times are recorded and he/she participates in time evaluation.
Example:
The employee's actual times are recorded at a time recording terminal.
The employee's actual times are recorded in the Attendances infotype (2002).
Indicator 2:
Employees' actual times are recorded and they take part in plant data collection. Their time data is accounted using the time evaluation program.
Example:
Employees' actual times are recorded using PDC systems.
Employees' actual times are recorded in the Attendances infotype (2002).
Indicator 8:
This indicator is intended for external employees. The employee's actual times are not recorded, attendances are recorded in the Attendances infotype (2002), and time data is accounted in time evaluation.
Indicator 9:
You can use indicator 9 for employees for whom only exceptions to the work schedule are recorded. In this case, the employees' actual times are not recorded, but they do participate in time evaluation.
I hope it helps you!!!
CheerS!!

Time Management Concepts

Hi All,
        i am new to SAP-HR and i need some basic clarifications i searched the forum before posting but i am getting a exactly correct answer that is why i am posting it
why we need time management component?
what is Shift Planning?
What is Work schedule ?
what is time evaluation?
and how these components are integrated in the time management module .
please answer in the very layman language i am confused with the help.sap document.

Hi,
why we need time management component?
           Employees' time data maintained in Time management is transferred to payroll to calculate employees pay.
what is Shift Planning?
Here you can assign shift times, locations and the number of required employees for the enterprise.
What is Work schedule ?
Work schedule defines the working pattern of the employees.
what is time evaluation?
   Employee's time data is valuated in time evaluation. It determines planned working time, overtime, create wage types like overtime or bonus wage types.
Hope it helps. If more clarification needed let me know.
regards,
kalyani

Real time Integration between Oracle i-Procurement with MUMPS based System

Folks,
Has anybody worked on integrating Oracle Applications with any Legacy System? I'm interested in discussing real time integration between Oracle i-Procurement and Legacy System. Can 9iAS Advanced Queue be used to accomplish this?
If anybody has any information on this topic please reply back or email me at [email protected]
Regards,
J Ali

Yes, we have experience with the product Oracle9iAS InterConnect. Adapters are provided to integrate with iProcurement and legacy systems. If your legacy system is non-standard either partners might already have adapters or you can use the adapter development kit to build your own specialized adapter. Check out: http://otn.oracle.com/products/integration/index.html
and I would suggest to contact your Oracle account manager to get a detailed product demonstration and references.

Time Management Status 7 without Payroll Integration.

Dear All,
when do we go about Time Management Status - 7 - without Payroll Integration.
In this case how the process goes on SAP. what do we do in this status. do we record employees attendances in 2002 IT
actually what happens.
Regards
kvn

Hi KVN,
You are using time management status 7 which means that no integration to payroll.Now as far as ur Quotas are considered then please use RPTQTA00 which is just a program and RPTIME00 or PT60 which will run time evaluation and if u want your Quotas to generate in time evaluation then just change V_556A_B in this table to increase so with time evaluation and no generation for Quotas to be with time evaluation.
The client may ask sometimes for few Quotas to be prorated on a daily basis and so on in that case go with TE Quota generation
else RPTQTA00 is ok.So see ur business and use either of it
Let me know if u have any further Questions.
Thanks
Swati

Difference between Time Management and Time Evaluation

Hello
Is there any Difference between Time Management and Time Evaluation? if yes, then what is it? I guess there's no diff, time evaluation is a report..
please advice
Thanks

Hi Charlene,
Time management can be divided into 3 steps
1.Time Recording
2.Time Evaluation
3. Planning
Time Evaluation :
The recorded time data is grouped and converted to wage types which can be used by payroll for compensation.SAP provides a time evaluation program RPTIME00 for this purpose.
Standard schemas TM00 and TM04 are used for evaluation of time data got from positive and negative time recording approaches.
time evaluation program RPTIME00 also calculates accrual and entitlement for employees.
Regards,
Swapnil

Integration between Time and ECM

Hello all
Could any of you describe or list what would be the integration impact issues to look for while implementing Enterprise Compensation Management with respect to Time Management. In my case, time is being administered by third party providers.
Thank you
Nelly

could any one provide me inputs on this issue?
Thank you in advance

Integration between Finance and service management

Hi,
Does anybody know integration between Finance and Service management? If you have any documentation please send to [email protected] It is urgent!! Please help me I will reward you with points.
Thanks,
Neeli

Hello
Check this link.
http://help.sap.com/erp2005_ehp_02/helpdata/en/3c/05ce40c3e10366e10000000a1550b0/frameset.htm
Reg
*assign points if useful

Time Management Fratures & Link between Infotypes 0007 & 0008.

Hi,
Let me know the what are all the features used in time management.
also what is the link between 0007 & 0008.
Regards
Rajesh

Time features
SCHZK
QUOMO
TIMMER
PY
LGMST
ABKRS
and some are there
Link
will start from
0007 DWSR to 0008 Annual working horus
and in the sub Schema check XT00 there
Check GENPS generation of PWS here we link PY and Ti
Check TC00 DZL DML tables

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Integration between OM & Time Management.

Similar Messages

Maybe you are looking for