Internet keeps stopping but im still connected

My wifi is on and i have full signa yet hen i goto the web it keps saying safari cannot load page what should i do?
  Model Name:          MacBook Pro
  Model Identifier:          MacBookPro9,2
  Processor Name:          Intel Core i5
  Processor Speed:          2.5 GHz
  Number of Processors:          1
  Total Number of Cores:          2
  L2 Cache (per Core):          256 KB
  L3 Cache:          3 MB
  Memory:          4 GB
  Boot ROM Version:          MBP91.00D3.B08
  SMC Version (system):          2.2f41
  Serial Number (system):          C17J64E2DTY3
  Hardware UUID:          275EEEBE-DFCA-5DEE-8B4E-9580A022203F
  Sudden Motion Sensor:
  State:          Enabled

It could be wireless interference that is causing the problem. Download a Wifi Analyser app for you smartphone if you have one or use the free version of inSSider from forum member Keith Beddoe's website here
http://forumhelp.dyndns.info/software/insidder.zip
It will show you the wireless channels and which one your Homehub is on. You want to find the channel with the least congestion, ie. least number of users. Once you have that you need to change your homehub onto that channel.
See link how to change channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/140​94
My advice would be either run an Ethernet cable from the Homehub or get Powerline adaptors and use them to connect the PC to the Homehub. You will get far better speeds and a more stable conection.  

Similar Messages

  • Video keeps stopping, but sound continues

    Recording works fine, but when I try to play videos it keeps stopping but the sound continues. Tried som other programs from google play, and they work tiny bit better... they also stop (makes a loading sign), but also stops the sounds, before continuing after a second or two. But on a film lasting 1 minute it will stop more or less every 4 seconds for more "loading". I've had a Sony Xperia before where there never was a problem, but this on (got a new one last week) has had a problem right form the start. Any suggestions?

     Settings > apps > all > camera > clear data > restart the phone  record a new video BUT make sure to save the video on the internal storage and then try to play it  I've seen this before and it's a SD card issue. 

  • Mac loses internet after wake from sleep, still connected to router

    Hi All,
    So, I see similar threads, but I'm not sure if this is the same problem. Here's what happening:
    -When I wake my Mac from sleep it usually (but not always) loses its internet (but not wifi) connection.
    -The loss happens 10-15 seconds AFTER it wakes up. If I go to Safari/Firefox right after it wakes up, I can bring up webpages fine for about 10 seconds. Then, suddenly, pages stop loading.
    -The wifi stays connected (I have an airport router) the whole time, and if I go to the airport utility, everything looks fine.
    -I know this is not a problem with my internet or my router because I have tried opening web pages on both my iPhone (connected to wifi with cellular off) as well as my PC laptop (I only have it for one program that the company does not make for the Mac and I need for work, haha), and both browse the internet just fine even though my Mac says there is no internet.
    -If I restart my Mac, the internet works fine. This is a simple fix, however it's also annoying to have to do it all the time.
    -This is happening in different locations, not just on my wifi. It happens in coffee shops, hotels, and airports too.
    -Not sure if this is related, but I have also been getting messages in iTunes saying that I need to authorize my computer or apps will be deleted.
    -I completely deleted Norton, as I had a hunch it was responsible for this problem (since the internet was disconnecting right after getting an "add location" message from that program). However, even with it completely off my computer, I'm still having the issues.
    Any suggestions???

    What Mac OSX version are you running? "iOS 8.2" as currently shown in your profile cannot run on any Mac computer, only Apple mobile devices.
    If your computer has automatically connected to a lot of networks, say, during travel, that might hinder waking as the computer looks for what networks it remembers. Go to System Preferneces > Network and select your wirelss connection from the left-hand pane. Then click the "Advanced" button in the main pain. That will show the list of networks you Mac has stored:
    There could be a lot. Clear out all networks stored there except those you use on a weekly basis. The little box with the "-" icon clears unwanted networks. Restart the computer and see if thising work better.
    -I completely deleted Norton, as I had a hunch it was responsible for this problem (since the internet was disconnecting right after getting an "add location" message from that program). However, even with it completely off my computer, I'm still having the issues.
    Download and run Etrecheck, a safe way to post a snapshot of your config without revealing any personal information. I'm concerned you did not get all of Norton, or have some other dreck like CleanMyMac or MacKeeper lurking.
    http://www.etresoft.com/etrecheck

  • Since running the update, my mail is messed up.  Light saying connected to internet is green but SMTP's (connection Dr)  are red.  Is there a setting I need to change?

    I ran this update on my Mac.   Everything else seems fine BUT mail isn't connecting to the servers.  I've opened connection Dr.  says I'm connected to the internet but none of the servers e.g., gmail, or yahoo will connect anymore.  What do I try?
    About the OS X Mavericks v10.9.5 Update   This is the update I just ran.

    I just went back through and went through the port settings after looking up what should be there.  Why were some of them different after the update?
    I did make a couple changes to the port #'s and restarted my computer again.
    I opened the connection Dr.  says my internet is fine but still not receiving or sending email.  still shows that email is not connecting.
    I know the esp's work ( I finally figured out esp vs isp)  My email is up and working on my iPad so it is working MUST be a setting.
    it is 3:45 my time and I'm off to work for 4 pm - so this is another 3 hours of reading and working on this to try to reinstate my emails on my home computer.  Thank goodness my iPad wasn't mucked up too.
    I'll go through with a fine tooth comb after work at 10 tonight.
    I appreciate your help.

  • Why is my iPad's wi-fi constantly going on and off but is still connected?

    Sometimes I am using Skype to call people, but in the middle of the call, the call drops. The wi-fi is still connected, but the app says I am offline. I'm pretty sure it's not a bug in the app but rather the iPad's hardware. I've browsed the web sometimes having to disconnect and reconnect my wi-fi radio. Is anyone experiencing the same problem?

    Wife and I just bought the new IPad 4. We are experiencing wifi issues where we show full bars but cannot get to websites or access anything on the Internet. We use our IPhone 5 at the same time and we can get on the Internet just fine. What a bummer to have to call Apple about this.

  • I have a Time Capsule as my router.  I can connect wirelessly to the network and internet with my MBPr, but my Mac Mini will only connect to the network wired or wirelessly. Airport on it sees the internet as green, but will not connect.

    I have the Time Capsule hooked to a wireless modem.  It uses a static IP, which is put in and running.  The MBPr connects, as well as my iPhone 5, to the internet and network without problem.  I can see the Mac Mini, external drive attached to it, and the Time Capsule.  The Mac Mini connects to the network wired or wirelessly, but not to the internet.  On wireless, using AirPort the Internet shows green, but no connection when I open Safari.  The settings under network settings are identical except for LAN IP between the Mac Mini and the MBPr.  I was hoping someone might have an idea of what was going on.  Before I moved the Time Capsule was on Bridge mode from another router, now it is on DHCP and NAT for the internal network.

    No, its is connected direct to the providers fiber box.

  • Alias dropped but can still connect with the same

    Hi,
    I had 2 instances of sql server on server machine -
    XYZ05 (SQLServer 2008R2 which was default instance and port was 1433) and XYZ05\SQL2012 (New named instance and port was 40196)
    Due to some requirement we un-installed XYZ05 instance, team wanted to connect XYZ05\SQL2012 instance using default instance i.e. XYZ05. So, we created alias with same name and changed
    the port from 40196 to 1433 and it was working fine.
    Now, I have dropped the alias but I can still connect the server using same alias. I have checked registry, cliconfg.exe, restarted the service and server. However, I can still connect
    using the alias.
    Can you please tell what I missed to check or what could be the reason for alias still working?
    Thanks!!

    Hello,
    It's because the default port 1433 is used, that's why you can only use the machine name to connect to.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • I recently moved into a new apartment and I can connect with the internet by direct connection to the cable/internet modem.  But when I connect my Airport Express, it just blinks with a yellow light and I cannot connect via WiFi.  Any suggestions?

    I recently moved into a new apartment and can connect with the internet by direct attachment to the cable/internet modem.  But when I try to connect the modem to my Airport Express, the Airport just blinks yellow and I cannot get my WiFi.  Any suggestions?

    Try this User Tip from forum expert Tesserax:
                     AirPort - Complete Power Recycle

  • HT4199 Problem Syncing with Itunes wirelessly but can still connect to wi-fi.

    I can access wi-fi from my Iphone 4s and the internet but can't connect to itunes wirelessly to sync the phone.  Was working fine and then just stoppped. Can stilll sync when plugged in but can't use certain apps that require wireless syncing only.

    First connect your iPhone to your computer, click on iPhone than check mark "Sync using Wi-Fi. There your problem is fixed. Make sure your computer and iPhone is connected to the same network.

  • HT204023 hi there can any one help me i have a iphone 5 but my mobile internet not working but i can connect to my wifi no bother

    hi there can any one help me i have a iphone 5 but my mobile data is not working but a can connect to my wifi no bother

    talk to your carrier about the data subscription and possible settings changes to their apn than

  • Ipod shows a white screen but  it still connects to my computer

    Today I was silly enough to drop my Ipod accidentally on the ground (by accident of course) though not very hard, when I turned it back on a white screen shows up. However I can still reset it but it still shows up as a white screen. When I plug the Ipod into my computer Itunes still picks it up and all of my songs & albums show up still. When I take the Ipod out it's still a white screen. I've tried resetting the thing many times but still no luck. What should I Do? Does anyone still think there may be hope restoring this?
    Message was edited by: Mama Luigi

    Try the white-screen topic of:
    'iPod touch: Hardware troubleshooting
    Frequently it is due to a hardware problem.

  • HomeFusion stopped working, but Jetpack still connects?

    It is Memorial Day weekend and we live near a popular lake with lots of weekend traffic.  We just got HomeFusion a week ago and everything has been working splendid, until yesterday.  I can see where we are connected to the router, it says it's connected to the net, but nothing will load.  I thought that maybe the high load of traffic is overloading the tower. But I plugged in our jetpack that we still have and I'm able to connect with no issues.
    Yes, I've unplugged and replugged the router.  I have not changed any router settings since it was installed. All the lights on the router are green. I tried running a direct lan line to my pc and the issue still persist.
    I'm reluctant to call Customer Support because of issues I've heard of wait times and some service reps not even knowing what HF is.
    Is this possibly a high traffic issue being a holiday weekend? If so, then why can I connect with the jetpack?  We are planning to cancel our jetpack service, so this issue happening less then a week into our service is alarming.  Any suggestions?

    TB,
    Thanks for helping out. FYI, as of Tuesday morning (the day after Memorial Day) we regained net access. Aside from unplugging the router a couple times on Saturday, I've done nothing else.  As I mentioned, all the lights on the router was green.  Both lights on the can where solid green.  I logged into the admin page and it said I had good signal strength and connections.  So for some reason, we just could not access the net for three solid days over a holiday weekend through HF, but we could access it through the jetpack. Since all out hardware shows green, I can only assume we were being blocked on the server side.  If there any way to check this out?
    So I'm stuck on where to go from here.  We were getting ready to cancel the jetpack service because we're over the 10 day trial for the HF.  There is no point is keeping both.  But are we going to lose our HF service every weekend during our high traffic summer season?
    Thanks again for taking your time to work with me on this!

  • Having problem with wireless symbol on my mac greys out allot but is still connected and working on the Internet. Does this mean anything?

    When my new mac is switched on (running lion) and on the Internet and working fine, occasionally the wireless symbol keeps greyish out but the Internet etc is still working fine. Does this mean anything?

    Hello,
    My first guess would be some kind of interference, any TVs, Phones, Microwaves, neighbors, etc. around?

  • WRT54G lost connection to Internet from Wired computer, but wireless still connect

    I have the router hard wired to a desktop computer and have 2 other computers connecting wirelessly through it.  The hard wired computer suddenly could not connect to the internet, yet the 2 wireless computers still can.  The computer was 5 yrs. old and I had bought a new one, so thought it was the best time to set it up.  I have the same problem with the new computer.  The only way I could get access to the internet on it was to run a line from the USB port on the DSL modem directly to the computer.  I can still see the 2 other computers and their files through the router, just can't get the router to see the modem from the hard wired computer.  The 2 wireless computers can access the modem through the router, but the wired one can't!  According to Linksys the problem is with my ethernet/lan on the computer.(both computers?!)  According to the repair/diagnose on my lan connection, it says there is a problem with the router or modem.  Any suggestions?

    I found the problem, the router is bad.  I bought a new router and installed it, made no changes to the computer hardware, and the new router worked fine with the ethernet connection for the hard wired computer.  I am really disappointed in the help that I received from linksys.  They kept insisting there was nothing wrong with the router and that the 2 computers I tried to hard wire to the router both had bad ethernet ports.  I will not be buying their products again.

  • Internet stops working while still connected to wifi

    The internet on my Macbook pro begins running slowing after using it for a while. But after restarting the computer it goes back to working fine. Using sites like tumblr cause it to go to crap even faster, and I'm assuming that's because of the constant reloading and processing of new things.
    Searching through google pages excessively does the same thing. However, if I watch movies on netflix, or videos on youtube, the internet doesn't go to crap as quickly. When it finally does start running slower, the fan in my computer is running loudly. Pages on the internet refuse to load or load slowly.
    The rest of the things on my computer work decently. This doesn't appear to be an issue with Kernel_Task. I'd appreciate any help. I really don't want to have to take in the computer, so I'm hoping it's something I can solve on my own

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • Multiple instances of the same application under OC4J

    Hello, I've currently deployed three copies (differently named deployments, differently named EARs) of the exact same application (using the BC4J framework) on OC4J. One version is the stand-alone distribution of OC4J 9.0.2.* running under UNIX. I ha

  • Action needs to be triggered in future date

    Hi All, We have a requirement where we need to trigger an Action on Contract's End date. How can we define action, so that it would be triggered in future date automatically with out any user intervention. I have checked with Date profiles. That woul

  • Photos not shown in Photos-Application any more

    Suddenly the pictures i have taken with the phone do not show up any more in the standard photos application. It shows only one picture this month..... but they are still existing on phone memory. Looks like the library information are corrupted. Any

  • How to move a particle system with arrow keys?

    I have a little "ice fountain" particle effect and I want to be able to move it like an object. How do I use actionscript to effect a group particle system? (or have collision detection features for that matter) Code: this.createEmptyMovieClip("holde

  • Unable to connect VDI3 to an active directory on windows 2003

    Hi, I am unable to connect to an active directory. with the following error:- Unable to Connect to User Directory Connect operation failed I can successfully user the kinit login with the same domain and user credentials.... the Vdalog.0 is throwing