Invalid Number for date

hi i am facing error as invalidNumber
select hp.party_name CustomerName,count(csi.incident_number) ServiceRequestNumber from
hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl
where hca.cust_account_id=csi.account_id
and hp.party_type        IN ('PERSON','ORGANIZATION')
AND hp.status               ='A'
AND hp.party_id             = hca.party_id
AND hca.status              ='A'
AND hp.party_id             =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
and hp.party_id             =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+)      ='Y'
AND hc.status(+)            ='A'
AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+)      = hc.phone_line_type
and hp.party_name like :partyName
and csi.incident_date BETWEEN to_char('01-JAN-2005','DD-MON-YYYY') and to_char(:fromsrdate,'DD-MON-YYYY')
group by hp.party_nameEdited by: Naveenapps on Aug 26, 2009 10:27 PM

Hi Ravi,
to_char should also work. worked fine for me in 10g
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as ace
SQL> create table test1 as select created_date from oa_valid_status;
Table created
SQL> desc test1;
Name Type Nullable Default Comments
CREATED_DATE DATE Y
SQL>
SQL> select *from test1
2 where
3 created_date between to_char(sysdate-10,'DD-MON-YYYY') and to_char(sysdate,'DD-MON-YYYY')
4 /
CREATED_DATE
8/20/2009 5:
8/20/2009 5:
8/20/2009 5:
8/20/2009 5:
8/20/2009 5:
8/20/2009 5:Jacob

Similar Messages

Error -ORA-01483: invalid length for DATE or NUMBER bind variable

In discoverer plus, attempt to save a discoverer workbook into the database fails with the error:
ORA-01483 invalid length for DATE or NUMBER bind variable
The same workbook can be safely saved in "My Computer".
Any idea why and what is the solution.

Why: not quite sure, probably the code is validating the workbook when it saves it to the db and you've got an error in the sql. What happens when you run the workbook that you saved to the file system? Does it show the same error when run?
Solution: Can you post the sql in the workbook? In the meantime try the following: Replace any to_char statements around dates with to_date statements instead. For example:
Replace:
where to_char(mydate, 'dd-mon-yyyy') = '05-apr-2009'
With:
where mydate = to_date('05-APR-2009','DD-MON-YYYY')

Query to find first and last call made by selected number for date range

Hi,
query to find first and last call made by selected number for date range
according to filter:
mobile_no : 989.....
call_date_from : 25-april-2013
call_date_to : 26-april-2013
Please help

Hi,
It sounds like you want a Top-N Query , something like this:
WITH    got_nums   AS
     SELECT     table_x.*     -- or list columns wanted
     ,     ROW_NUMBER () OVER (ORDER BY call_date      ) AS a_num
     ,     ROW_NUMBER () OVER (ORDER BY call_date DESC) AS d_num
     FROM     table_x
     WHERE     mobile_no     = 989
     AND     call_date     >= DATE '2013-04-25'
     AND     call_date     < DATE '2013-04-26' + 1
SELECT *     -- or list all columns except a_num and d_num
FROM     got_nums
WHERE     1     IN (a_num, d_num)
;This forum is devoted to the SQL*Plus and iSQL*Plus front ends. This question doesn't have anything to do with any front end, does it? In the future, you'll get better response if you post questions like this in the PL/SQL.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the SQL forum FAQ {message:id=9360002}

ORA-01722: invalid number for getting PR information

This is a query ran on Oracle Purchasing database, I want to select all those purchase requisitions which have accounting segment3 value between 100000 and 199999. The query errors out.
As in the below query, even though I said "to_number(ccds.segment3) account_seg" in the inner select query but when I give a where condition "account_seg between 150000 and 160000" in the outer query, the sql errors out with "ORA-01722: invalid number" error.
By commenting out statement "where account_seg between 150000 and 160000", I checked the values returned for segment 3 are all digits and no alphabets.
Whats can be the issue ?
ERROR at line 16:
ORA-01722: invalid number
select requisition_header_id from
select
prls.requisition_header_id requisition_header_id
,to_number(ccds.segment3) account_seg
from
PO_REQUISITION_headers_all prhs
,PO_REQUISITION_LINES_all prls
,PO_REQ_DISTRIBUTIONS_ALL prds
,gl_code_combinations_kfv ccds
where
prhs.requisition_header_id=prls.requisition_header_id
and prls.requisition_line_id=prds.requisition_line_id
and prds.code_combination_id=ccds.code_combination_id
where account_seg between 150000 and 160000

Hi this error comes because of data problem.
Some value in segment3 is having alphanumeric data. Check it i am sure about this, i verified!
Adding more info:
Some of the alphanumeric data that i found in my database are:
X00050
F5000
Let us replicate your error:
1. This will run fine:
SELECT segment3
FROM gl_code_combinations_kfv
WHERE segment3 = 'F5000';
SEGMENT3
F5000
But when we say TO_NUMBER of this value, see what happens:
SELECT TO_NUMBER(segment3)
FROM gl_code_combinations_kfv
WHERE segment3 = 'F5000';
SELECT TO_NUMBER(segment3) FROM gl_code_combinations_kfv WHERE segment3 = 'F5000'
ERROR at line 1:
ORA-01722: invalid number
Error proved!
Thanks,
Jithendra
Error Proof added
Jithendra

Incrementing a string number for date and time

There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to.
I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will output 2006-4-19. I need to be able to increment in a loop for every day and month from one date to the next. If I keep it as a string, I won't be able to increment the value though, (at least I'm not sure how). I'm thinking that even if I converted it to an integer and back to a string, that the leading zero would be removed.
I found a post here that said something about formatting the number with 2 numbers, by using:
DecimalFormat format = new DecimalFormat("00");
format.format(1, sb, new FieldPosition(0));
Or is there a way to use the gregorianCalendar stuff that would output the date with all of the zeros in place, while incrementing and looping correctly?
Thanks.

I would get a Date object--you can use java.text.SimpleDateFormat if you're starting with a String--and use that to create a GregorianCalendar. Then you can just call Calendar's add method to add one to whichever field you want. Use the SimpleDateFormat to turn the date back into a String for display again.
Calculating Java dates: Take the time to learn how to create and use dates
Working in Java time: Learn the basics of calculating elapsed time in Java
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format

Invalid Number Error for Decimal Field While Loading Data

I am loading a delimited text file using the SQL* loader however I am reciving an error in my decimal fields. When a decimal field only has leading zeros before the decimal point I receive invalid number error. Below will clarify:
i.e.) 00000000.30 [*Invalid number*]
i.e.) 00046567.45 [*Valid number*]
i.e.) 00000001.00 [*Valid number*]
I've tried setting the precision/scale in the table, tried declaring it a decimal field instead of number, none of these methods fixed the issue. Any help I would really appreciate.
POLICY_NUMBER             NUMBER,
EFFECTIVE_DATE     DATE "YYYYMMDD"          NULLIF EFFECTIVE_DATE = '',
TRANSACTION_DATE     DATE "YYYYMMDD",
TRANSACTION_AMOUNT     DECIMAL EXTERNAL,   -- Tried TRANSACTION_AMOUNT DECIMAL EXTERNAL (10) & TRANSACTION_AMOUNT NUMBER
MF_TRX_CODE          NUMBER,
USER_ID          CHAR,
GROUP_NUMBER          NUMBER,
EXPIRATION_DATE     DATE "YYYYMMDD"          NULLIF EXPIRATION_DATE = '',
BILL_NUMBER          NUMBER,Any help is greatly appreciated. Thanks before hand.

Hi,
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
SQL> SELECT * FROM TEST;
TRANSACTION_AMOUNT
          11000,00
            293,37
           2000,00
           1134,32
              0,30
SQL>Between the selects I loaded the table with sql*loader using...
Load Data
INFILE *
APPEND
INTO TABLE TEST
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
TRANSACTION_AMOUNT     DECIMAL EXTERNAL
BEGINDATA
00011000.00
00000293.37
00002000.00
00001134.32
00000000.30The log is
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Dec 23 17:23:47 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File:   test.ctl
Data File:      test.ctl
Bad File:     test.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table TEST, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
   Column Name                  Position   Len Term Encl Datatype
TRANSACTION_AMOUNT                  FIRST     *   |       CHARACTER
Table TEST:
5 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array:                  16512 bytes(64 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:             5
Total logical records rejected:         0
Total logical records discarded:        0
Run began on Tue Dec 23 17:23:47 2008
Run ended on Tue Dec 23 17:23:50 2008
Elapsed time was:     00:00:02.86
CPU time was:         00:00:00.06Regards,

Invalid number error for bind dialog

Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79
Running under WinXP
Issue description:
We get an invalid number error when bind variable filled with an enter in the bind dialog

It is hard to say what is causing your problem without the specifics (ie query and value entered for the bind variable). Try running the same statement with the value of the bind variable in place of the bind variable (ie instead of running "select * from dual where dummy = :var" with a value of 'x' for :var, run "select * from dual where dummy = 'x'"). If you get the same error, then it is not an issue with the use of bind variables.
Be aware that currently you cannot define the data type of bind variables (unlike TOAD, etc) and they are all treated as character values. I wouldn't have thought that this would cause you problem unless you are using a bind variable to restrict a numeric column to a specific value and you are entering a non-numeric bind (ie "select * from people where person_id = :id" and using 'xyz' as the value for :id).

There is an invalid number of result bindings returned for the ResultSetType

SSIS SQL Task: Single Row Result Set
Code was updated to test for data in target: If Exists Do Merge ELSE Do Insert
Previously was just a merge that Output $Action to @ChangeSum and then @ChangeSum queried for updates and inserts
That all worked but after injecting new code I receive the error There is an invalid number of result bindings returned for the ResultSetType that I don't know what it means or how to troubleshoot.
Inject New Code:
IF OBJECT_ID('tempdb..##TblTemp', 'U') IS NOT NULL
DROP TABLE ##TblTemp
Declare @sql nvarchar(max);
set @sql = @TestForData
exec (@sql);
IF EXISTS (select top 1 * from ##TblTemp)
       Begin
--Beginning of existing code
         begin transaction;
           begin try
           declare @MergeQuery varchar(max)
           set @MergeQuery = convert(varchar(max), @MergeQuery1) + convert(varchar(max), @MergeQuery2)
           + ' ' + convert(varchar(max), @MergeQuery3)
           + ' ' + convert(varchar(max), @MergeQuery4)
           + ' ' + convert(varchar(max), @MergeQuery5);
           exec(@MergeQuery);
           end try
           begin catch
               declare
               @Message VARCHAR(4000)
               ,@Severity INT
               ,@State INT;
               select
               @Message = ERROR_MESSAGE()
               ,@Severity = ERROR_SEVERITY()
               ,@State = ERROR_STATE();
               if @@TRANCOUNT > 0
               rollback transaction;
               raiserror(@Message, @Severity, @State);
           end catch;
           if @@trancount > 0
           begin
               commit transaction;
           end
--End of existing code
      End
else
       Begin
   declare @InsertQuery nvarchar(max)
   set @InsertQuery = convert(varchar(max),@InsertQuery1)
   exec (@InsertQuery);
      end
Drop Table ##TblTemp
=================================
SSIS Variable @InsertQuery1:
This variable is executed in SQL Task and the last 3 lines I expect a single row of Insert & Update counts to be returned.
   declare @ChangeSum table(change varchar(25));
   declare @Inserted int = 0;
   declare @Updated int = 0;
While 1 = 1
    Begin
        INSERT INTO [R_Paid].[BusCodeF454x93]
       OUTPUT Inserted.Sta3n INTO @ChangeSum
       SELECT TOP 1000 s.*
       FROM [R_Stage].[BusCodeF454x93] s
       WHERE NOT EXISTS
          SELECT 1
            FROM [R_Paid].[BusCodeF454x93]
           WHERE STA3N=S.STA3N and [BusCodeF454x93IEN] = s.[BusCodeF454x93IEN]
       IF @@ROWCOUNT = 0 BREAK
END
   set @Inserted = (select count(*) from @ChangeSum );
   set @Updated = 0;
select @Inserted as Inserted, @Updated as Updated;

"SELECT " + (DT_WSTR,50)@[User::TargetExists] + " = CASE WHEN COUNT(*) > 0 THEN 1 ELSE 0 END
FROM " + (DT_WSTR, 100) @[User::DataDestinationTable]
must do the trick
The T-SQL merge allows both inserts and updates:
MERGE Target AS T
USING Source AS S
ON (T.EmployeeID = S.EmployeeID)
WHEN NOT MATCHED BY TARGET AND S.EmployeeName LIKE 'S%'
THEN INSERT(EmployeeID, EmployeeName) VALUES(S.EmployeeID, S.EmployeeName)
WHEN MATCHED
THEN UPDATE SET T.EmployeeName = S.EmployeeName
WHEN NOT MATCHED BY SOURCE AND T.EmployeeName LIKE 'S%'
THEN DELETE
OUTPUT $action, inserted.*, deleted.*;
ROLLBACK TRAN;
GO
Arthur My Blog

"Invalid Number" error for no apparent reason

Hi.
We're transferring data from one table on one DB to a data warehouse on a separate DB. All Oracle 11g running on Windows Server 2003.
The columns all match data wise, and it's a simple select and insert.
However, we got an ORA-01722: invalid number error on one run. We checked all the data, which was fine (all 540,000 rows) and ran it again with no error this time.
I'd like to know if anyone knows why this would happen if there is no issue with the data validity. I'll take all guesses or known issues and check them against our systems. If anyone knows how I can get this to repeat I'd be grateful as it's all running fine now.
Cheers
Si

The data is transferred using a Java program. Select into an OracleResultSet() then read each row result into a prepared statement. Were using the batch send, I believe every 100 rows.
The source columns match the target columns for name and type, with two exceptions where the column name is slightly different but the column type still matches.
There are not triggers on either the source or target tables.
Cheers
Si

Invalid redemption code - can't get my serial number for Adobe Acrobate XI Standard

I keep receiving a message, "The code you entered in invalid." for my redemption code. I used the number one and the small l and a zero and a capital O in my redeption number and still get the same message. How do I get the serial number so that I can download my Adobe Acrobat XI Standard program that I purchased from Best Buy today?

Hello - Is the issue still pending

ORA-01722: invalid number error - column data type is date

Hi all,
When I perform this statement everything is ok, but some of clientbirthday values are null:
select d.id, d.name, d.contragenttypeid, d.reestrtypeid, d.clientbirthday
from creator.contragent d
where d.contragenttypeid = 3
and d.reestrtypeid in (2,4) When I'm trying to get "d.clientbirthday is not null" I receive error:
select d.id, d.name, d.contragenttypeid, d.reestrtypeid, d.clientbirthday
from creator.contragent d
where d.contragenttypeid = 3
and d.reestrtypeid in (2,4)
and d.clientbirthday is not null ORA-01722: invalid number
What is wrong? Why does it say "number" when clientbirthday column datatype is date ?

Can you make a desc creator.contragent

Dbms_crypto package for number and date data type

Hi,
I am using Oracle 10g 10.2.0.3 on Linux 64 bit
I am tryiing to use dbms_crypto package for the first time to encypt my tables column
Following are my table columns
NAME1 VARCHAR2(2000),
ID1 NUMBER,
SCORE number
This table is already populated
i want to encrypt Name1 and Score column. Following are the functions i have created for Encryption and decryption.
--For Encryption
create or replace function get_enc_val
p_in in varchar2,
p_key in raw
return raw is
l_enc_val raw (2000);
l_mod number := dbms_crypto.ENCRYPT_AES128
+ dbms_crypto.CHAIN_CBC
+ dbms_crypto.PAD_PKCS5;
begin
l_enc_val := dbms_crypto.encrypt
UTL_I18N.STRING_TO_RAW
(p_in, 'AL32UTF8'),
l_mod,
p_key
return l_enc_val;
end;
--For Decryption
create or replace function get_dec_val
p_in in raw,
p_key in raw
return varchar2
is
l_ret varchar2 (2000);
l_dec_val raw (2000);
l_mod number := dbms_crypto.ENCRYPT_AES128
+ dbms_crypto.CHAIN_CBC
+ dbms_crypto.PAD_PKCS5;
begin
l_dec_val := dbms_crypto.decrypt
p_in,
l_mod,
p_key
l_ret:= UTL_I18N.RAW_TO_CHAR
(l_dec_val, 'AL32UTF8');
return l_ret;
end;
Key: I have stored a key in other schema and calling it by using function get_key().
Following is my insert
INSERT INTO Score_table VALUES
(get_enc_val('John',get_key()),25,get_enc_val(79,get_key()))
it is giving me following error
ORA-00932:Inconsistent Datatypes:Expected number got binary.
I checked, it is an error due to Score field, which is of number type. So do i need to change type of Score field to varchar or is there any other way to encrypt number and date field.
If i need to change the type then what will happen to the data already in Table and how do i encrypt data already in table.

Hi,
Is there any one who can tell me that, do i need to change my table column data type as the encrypted value will be character.

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

How to set a report culture for number and date

Hi,
Is there a way to change the report locale for the number and date?
I've tried using both CrystalDecisions.Share.SharedUtils.RequestLCID and CrystalReportViewer.SetProductLocale and neither work
The only one that work is to use the Thread.Culture. But that also change the application culture, not just the report.
Anyone have a solution?
Thank

Hi Michel,
I don't believe you can do this within just the report itself but I haven't played with this very much. Because the App hosts the Viewer it's based on it's culture.
You should be able to mix if you create a separate thread for each report job that way they are in their own space.
Search the Object browser on celocale and you'll find more info. Also the SDK help file should have examples.
No API's to use the Engine, had to use RAS.
Need to know what version you are using also and WEB or Windows app?
Here are some samples using RAS:
rpt1.ReportClientDocument.LocaleID = CrystalDecisions.ReportAppServer.DataDefModel.CeLocale.ceLocaleGerman;
CrystalDecisions.ReportAppServer.DataDefModel.CrFieldDisplayNameTypeEnum.crFieldDisplayNameFormula, CrystalDecisions.ReportAppServer.DataDefModel.CeLocale.ceLocaleUserDefault);
And using this way you may have to alter every object in the report.
Thanks
Don

Invalid Number for date

Similar Messages

Maybe you are looking for