IP config versus Desktop client

Questions to those of you already set up. We want to distribute both the
Palm and CE device Desktop Synchronization Integration software to ALL my
desktops, whether there is a device or not attached. We allow staff to
connect personal devices AND we have Agency issued devices. We want to at
least recognize all devices attached to our network, possibly force
certain security policies against all devices. Can this be done? Is
there any issues doing this, or should I only distribute the correct sync
software to machines that actually attach a PDA?
Second question: If you configure a PDA to use the appropriate IP client,
can you also install the desktop sync agent and use it. For example, I
want to be able to control whether a software install goes directly to the
device, or whether it goes to the desktop the device sync's with. That
way I can control when and how it is installed.
Thanks

Jeff,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

IOS Remote Desktop Client Logon Issue Prompts to Logon 3 Times with RDGW

I have an issue when connecting from the Remote Desktop client iOS on multiple iPads/users.
First a little background: We have an RDS Web Access / RDS Gateway (2012 R2) setup and properly configured. We can logon using it just fine from the Mac OS version of the app, Android version of the app, or from a Windows PC. When we try to
connect via the iOS app we get the prompt to logon 3 times. Due to security reasons, we do not want them to store their credentials on the iPads, which is the only method I have found to eliminate the triple password entry. It only prompts once on the Mac
OS version, Android version or from a Windows PC.
The password isn't being entered incorrectly and the servers are not registering any Audit Failures for the logon attempts. Can you assist?
Additionally I would like to recommend the addition of a feature to be able to setup remote resources but prompt for the password on app launch for security reasons. That way they would have to enter it once but then they could access any resources needed.
Thanks,
Nate L

I am not comfortable posting the entire log file but let me give you the high level summary. The settings section for the active connection:
[2014-Jun-17 12:45:23] RDP (0): Final rdp configuration used: {
    activeUsername = "domain\username";
    arcTimeout = 1800;
    configurationVersion = 8;
    console = 0;
    gatewayId = XXXXXXXX;
    host = "InternalServerHostName.domain.local";
    label = "";
    mouseMode = "-1";
    offsetX = 0;
    offsetY = 0;
    peerIp = "ExternalRDSGatewayIP";
    port = 3389;
    previousMouseMode = 1;
    previousUtilityBar = 0;
    screenshotScale = "0.125";
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    zoomFactor = 1;
    connections =
        ...bunch of addresses...
    host = "ExternalRDSGatewayHostName";
    id = XXXXXX;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
It then attempts to connect to the InternalServerHostName.domain.local.
[2014-Jun-19 09:40:01] RDP (0): Resolved 'InternalServerHostName.domain.local' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:01] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Jun-19 09:40:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:02] RDP (0): Showing credentials dialog
It then displays the same settings again with the exception of an additional line after the gatewayId line:
gwAutodetectState = kConnectionGwAutodectedForceGW;
Then it goes through the interface list, not using any proxy, correlation id, then resolves name:
[2014-Jun-19 09:40:10] RDP (0): Resolved 'ExternalRDSGatewayHostName' to 'ExternalRDSGatewayIP' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
[2014-Jun-19 09:40:11] RDP (0): Error message: The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
)(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:11] RDP (0): Showing credentials dialog
Then it displays the same settings again except for the gwAutodetectState line changing to:
gwAutodetectState = kConnectionGwAutodectedHTTPSTried;
Then it connects ok. I went to our firewall (MS Forefront TMG) and monitored for traffic from the iPad iOS App (based on network it is on). I don't see the initial connection attempt at all, which is expected because according to the log above it looks
like it tries to connect to the host directly...which it shouldn't?
Then in the second attempt I see it trying to go to http://ExternalRDSGatewayHostName:443/remoteDesktopGateway/ which again it shouldn't be doing because that URL (the remoteDesktopGateway) is not part of the RDSGW or RDSWA 2012 R2 IIS
config or am I missing something? It should be going to Rpc or RDWeb right? or do I need to allow that path through too?
Thanks,
Nate

Lync 2013 Hosting Pack - cannot join external non federated meetings anonymously with desktop client

Hello,
I Have a setup of LHP 2013. We have been testing federation and connections to external on-premises meetings.
Right now users with lync desktop client (2013 and patched) cannot connect to external 3rd party meetings without using the ?SL=1 and using the Wep App.
Desktop Client gives error on log file:
ms-user-logon-data: RemoteUser
Authentication-Info: TLS-DSK qop="auth", opaque="58FBAFA0", srand="0B8651AD", snum="15", rspauth="b63e033e6376b48ec973718f7369e3b90b0d75ba", targetname="lyncfe2.hoster.fi", realm="SIP Communications
Service", version=4
Content-Length: 0
Via: SIP/2.0/TLS 172.20.10.7:49680;received="public.ip";ms-received-port=55863;ms-received-cid=48400
From: "cloud.testuser"<sip:[email protected]>;tag=8f59b0fb81;epid=c7d2e31185
To: <sip:[email protected];gruu;opaque=app:conf:focus:id:5P20J0SK>;tag=C258840F87FD8713D4ADE01307F32C5B
Call-ID: 386e091eb7794fb286b858984349fccd
CSeq: 1 INVITE
ms-diagnostics: 27000;reason="To-Uri Domain is not in the sender-tenant allow list";source="LYNCFE2.hoster.fi";appName="OutgoingFederation"
Server: OutgoingFederation/5.0.0.0
From some old post I have read that was a bug in Lync client that did not allow fail-back to anonymous login with non-federated lync organization, but this has been fixed long ago.
If I do setup a federation beetween the organizations the meetings connect ok.
Thanks for help!
BR, Jouni

Hi Johan,
Lync client in test has been fully updated.
I Think I found what was causing this. In my tests, I added and removed domains from allowed and blocked domains list, in tenant config.
First after tenant organization has been provisioned the AllowedDomains looks like this:
Get-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d
Identity              : Global
AllowedDomains        : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowAllKnownDomains
BlockedDomains        : {}
AllowFederatedUsers   : True
AllowPublicUsers      : True
SharedSipAddressSpace : False
And joining to non-federated meetings works correctly.
After fiddling with the allowed and blocked domains settings (adding and removing domains) settings look like this:
Identity              : Global
AllowedDomains        : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowList
BlockedDomains        : {}
AllowFederatedUsers   : True
AllowPublicUsers      : True
SharedSipAddressSpace : False
When I check what the "AllowList" keeps in, it is empty as it should:
$tenant = Get-CsTenant | Where-Object {$_.Name -eq "tenantname"}
$x = Get-CsTenantFederationConfiguration -Tenant $tenant.TenantId
$x.AllowedDomains
AllowedDomain : {}
If I set the AllowedDomain backup to original form meeting connections begin to work.
$all = New-CsEdgeAllowAllKnownDomains
Set-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d -AllowedDomains $all
But now im just not very sure how I should setup the federation settings as per tenant/ExternalAccesspolicy/AccessEdgeConfiguration.. hmm..
BR, Jouni

Does OEM Desktop Client still exist?

I have been away from Oracle for a couple of years and now need to perform some task. In the past I used a Desktop Client call OEM (Oracle Enterprise Manager). I thought this was installed when the client or database software was installed. I have installed the 11.1 Client for Windows 32 bit and I don't see the OEM there. Is the OEM Desktop Client no longer available? Thanks,

cforasun wrote:
I'm reading the Oracle Enterprise Manager Concepts 10g R5. There is a section called "Database Control Versus Grid Control". Here is what is says:
Enterprise Manager provides two separate consoles that you can use to monitor your database: Database Control and Grid Control.
Database Control is the Enterprise Manager Web-based application for managing Oracle Database 10g Release 2 (10.2). Database Control is installed and available with every Oracle Database 10g installation. From Database Control, you can monitor and administer a single Oracle Database instance or a clustered database.
Grid Control is the Enterprise Manager console you use to centrally manage your entire Oracle environment. Within Grid Control, you access the multiple database targets using the Targets tab, then Databases.
I guess I'm looking for Database Control, so I need to figure out how to enable that. Earlier post mentioned dbcontrol. I think I need to locate the instructions to test/verify my installation and if it is not installed, then I'll need the installation instructions also.
Right now, when I run the following command, I get an error.
oracle@chelsea $ emctl status dbconsole
OC4J Configuration issue. /usr/local/Oracle/app/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole_chelsea.domain.com_ESR not found.
I'm at a loss now.
Just discovered that my database does not have a SYSMAN schema. How do I create that. Should I just use the create user command or run a script?
Edited by: cforasun on Apr 1, 2010 4:17 PM
Edited by: cforasun on Apr 1, 2010 4:46 PMFirst you must build the dbcontrol, using the 'emca' utility. I'm not at my work computer right now, so don't have my notes handy. Just google 'oracle emca' and you'll get lot's of good hits.

Test in business client, Desktop client disabled

Hi all,
I'm starting with NWBC 4.0,
I try to access some repository objects (se80) and when I try to test in business client the "Desktop Client" option is disabled.
How can I enable it? I have reviewed the services in SICF, but I'm not sure which has to be activated.
Thanks in advanced

Hi Eduardo,
I have the same problem. However using the test in business client option isn't very helpful as you won't start the dynpro application with a configuration if you need that.
What i normally do is creating a test role that i assign to my user in PFCG. Then you can just reload the navigation tree to see the newly added entries.

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

URL link to open transaction in NWBC Desktop client

Hi!
I am trying to create an URL link to open a transaction in a role that I am using.
The webpage is shown in a web-chip as a part of FPM page inthe NWBC desktop client.
I have tried this type of concept: https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
The problem is that this opens the transaction in the HTML version of NWBC (inside NWBC desktop client).
However, I would do not want to use the HTML based version of the transaction. I want to use nativ abap transaction inside NWBC Desktop client.
I am able to open the transaction with a link from a webbrowser with this type of link:
sap-nwbc://https://serverXX:8000/sap/bc/nwbc/~canvas/roleEntry/MyROLE:56/
This link does not open at all from within NWBC....
How do I achieve opening a transaction via URL from inside the NWBC Desktop client?

Hi Stefan,
Same issue i have as well.
My Understanding is, in NWBC desktop, if you open a non sap (eg: html) page, NWBC becomes an IE Browser.
That means you are now out of SAP for that tab (with html page) and whenever you try to launch any SAP transaction (using the method from HTML) it will launch in a new window and ask for Login.
May be Experts like Samuli Kaski & Melinda Ludanyi can put some light on it.
But, I have one more solution for this which is partially working in my case. May be helpful in you case as well.
Issue: From some SAP transaction in NWBC (say tab A), you are launching the html page (say tab B) and then want to launch another SAP transaction (Say tab C) from html.
Solution: Embed the HTML in SAP using HTML Viewer class and launch SAP custom transaction using the interface IF_LSAPI. It will launch it in new tab as a sap transaction with your html page.
Now if you want to launch the SAP transaction from your html page (Which is embedded in SAP custom transaction) you can use HTML Viewer class Events and you can pass parameters as well. Re use the same interface IF_LSAPI and launch it in new tab
In my case i am facing problems as the web developer has so many things on java script and they are not working properly. He is working on it and i am hoping it will be fine.
Regards,
Nik

Office 2013 - RemoteApp & Remote Desktop Client

When launching Office products from the Remote Desktop Client with Remote Resources / RemoteApp in OSX Mavericks. e.g. Office Word 2013 it is extremely slow and unresponsive. It opens to fill the screen but not full screen, cropping above the dock and below
the MAC toolbar. This is not apparent in Windows Surface Pro / RT / 7 / 8, Android, iPad / iPhone iOS
If I restore down the Window it seems to remove a white outer bar and then works as intended, even if I manually click and drag more or less to the same size of the maximised window. I believe this may be due to the Office 2013 shadow. In GPO I have:
- Added a registry to DisableAnimation
-Enabled 'Disable Office Animations' in the Office 2013 ADMX
-Enabled 'Do not use hardware graphics acceleration' in ADMX
Before:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=zfEfs30OKP8jaTL5vAjZBnFqPefGBcD4nNUqZHs3JAs%3d&docid=05b1d2a4c002e4152844656608eef7a9d
After:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=9aUKxic763dU7n2z3vxSDBkbXhyDo%2fo3P0jrEh08gtw%3d&docid=092297a567b51448e98ea674e3fab97f6
I am running:
OSX Mavericks
Mac Retina
Server 2012 R2
Kind regards,
Bobby Moore

Hi Bobby,
Let us start with opening Word in its application safe mode. Follow these steps to do so:
Hit Windows key on the keyboard, and start typing
winword /safe in search bar and hit Enter.
If the application works fine safe mode, try disabling the add-ins for the application and check the result:
Click the File tab.
Go to Options.
click Add-ins.
Select or clear the options that you want.
unchecked the add in like send to Bluetooth and something regarding office one not.
Let us know if you need further assistance .

What is new in Remote Desktop Client Update 3.8.2 v1.1?

What is new in Remote Desktop Client Update 3.8.2 v1.1? Also, how can we tell if clients are on 3.8.2 v1.1 and not 3.8.2 from ARD? Apple isn't providing us with detailed information so I am reaching out to the community.
THanks,
Andrew

Yeah, it tells you nothing which is why I posted. Here is what they link you to: About Remote Desktop Admin 3.8 - Apple Support
No details

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days.

Remote Desktop Client Update 3.8.2 v.11 remains in Software Update queue but, is listed (several times) under "Updates Installed in Last 30 Days". This is also the case with HP Printer Software update 3.0 and Digital Camera RAW Compatibility Update 6.03. Clicking the "update" button for these doesn't appear to install the software, but lists it in the "Updates Installed in Last 30 Days" without removing it from the Software Update queue.

Thank you. I tried that and even gave it a few days to do its thing, but I still get the same results. Remote Desktop, HP Printer, Digital Camera all still appear in "Available Updates", but the same versions appear under "Updates Installed in the Last 30 Days". BTW, I had to manually install the Safari 8.0.4 update because it also wasn't updating.

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

SAP CRM 7.0 - NWBC desktop client

Hi all,
we are on SAP CRM 7.0 (NW > 7.02) and NWBC 3.0 - 3.5.
In my understanding there're two ways to use SAP NWBC . By using (NWBC desktop client) and/or (NWBC for HTML).
We have assigned the CRM Business Role and then the PFCG role to a test user. If this user use NWBC for HTML the business role content is displayed correctly. Using the NWBC desktop client is not showed the same result. Is only displayed the business role name. Same behavior also by using the standard SAP business roles and PFCG roles.
Seem that the NWBC for desktop don't manage the UI service entries in PFCG menu (generated through CRMD_UI_ROLE_PREPARE report).
We are doing something wrong?
Many thanks.
Massimo

Hi Maikel,
many thanks. I don't receive an error message like this.
§ http://help.sap.com/saphelp_tm80/helpdata/de/90/18acafde5941b1ab70bd25acfb6517/content.htm
Then I suppose is not related to the NW version. But I will check.
Thanks.
Massimo

Remote Desktop Client update 3.8.2 keeps appearing

I installed the remote desktop client update 3.8.2 on my mini (Yosemite) without any probs. On my Air it is appearing over and over again although it shows up (5 times in the meantime) as being installed correctly.
Whats going wrong?
I had this issue with one of the latest printer updates, but was able to solve this by downloading the installer separately.
Is there a download for the remote client update anywhere.
Thanks
Stefan

Try re-indexing Spotlight.
Spotlight – Re-index
If that doesn't work, try control - clicking on the update to see if you get a Hide Update option.

Remote Desktop Client 8.1.3 Display Issue

We're running Microsoft Remote Desktop 2012R2 services including a Gateway/Connection Broker/Licensing server and Remote Desktop Session Hosts servers. Our clients include Windows systems, iPads and iPhones.
Since the upgrade to Microsoft Remote Desktop Client for IOS 8.1.3 (which fixed our gateway connection issues using the previous 8.1.x IOS clients), we're still unable to use our iPads with a published application that runs a time clock to check
children in/out of daycare centers.
When launching the published application, the display does not scale to full screen. A portion of the screen contains a black bar around the bottom and to the right of the window. The touch control needed is hidden by
the black bar. This issue did not exist in clients prior to 8.1.x nor does it exist in Windows clients.
Using the Pan Control does not resolve the issue. If you activate the Pan control, the application is so magnified that you only see about 1/4th of the upper left of the screen. Moving the window around or pinch to zoom in/out does not resolve
the issue.
Note that we have also published Microsoft Office 2010, Adobe Reader, Calculator and network share folders. None of these apps experience the issue with a black bar hiding a portion of the application window.
Any suggestions?

Hi Dharmesh - Yes, we did reinstall the RD 8.1.3 IOS client on our iPads a few times. And to answer your question, we are using a childcare software from the following company:
http://www.procaresoftware.com/
Microsoft Office 2010 as a published application appears to be functioning correctly with the iPads, although it hasn't been extensively tested. Most of our remote desktop Office users are on Windows 7 systems.
I've notified the Procare Software technical support team of this iPad issue and they forwarded the information on to their developers. They are releasing an updated version of their software some time in the next week. They have enhanced
the resizing / rotation support for tablets in the next upgrade release, but are unsure whether our iPad display issue will be resolved.
If the issue is not resolved by the upgrade, they suggest we seek a resolution from Microsoft. In the meantime, Procare stated that I could share this information with you. They're also copied on this forum to keep up with your comments.
Note: After we install the future upgrade of Procare Software, I'll report back here with the results.
Regards.

IP config versus Desktop client

Similar Messages

Maybe you are looking for