Test in business client, Desktop client disabled

Hi all,
I'm starting with NWBC 4.0,
I try to access some repository objects (se80) and when I try to test in business client the "Desktop Client" option is disabled.
How can I enable it? I have reviewed the services in SICF, but I'm not sure which has to be activated.
Thanks in advanced

Hi Eduardo,
I have the same problem. However using the test in business client option isn't very helpful as you won't start the dynpro application with a configuration if you need that.
What i normally do is creating a test role that i assign to my user in PFCG. Then you can just reload the navigation tree to see the newly added entries.

Similar Messages

E-Business Suite with 64-bit Windows 7 desktop clients

Hi,
I have Dell Inspiron n 4010 laptop with preloaded windows 7 Home Basic (64-bit) OS.
Wanted to install Oracle Apps..But could not make it.
Can anybody pls help me how to install in my laptop !!
Even I tried to insatll Window xp ..it wont allow.
Please suggest me the best solution.
Thanks,
Chris

CHRIS wrote:
Hi All,
Please help me !!!!!!
Can I do EBS installation on my windows 7 (64 bit) system on following steps.
1)Install vmware
2)install linux ( Oracle Linux Release 5 Update 7 for x86_64 (64 Bit) )
3)install EBS ( Oracle E-Business Suite Release 12.1.1 Update Media Pack for Linux x86-64 )
Please suggest me if it is possible or not ?Please see your other thread -- How can I do E-Business Suite with 64-bit Windows 7 desktop clients
Thanks,
Hussein

Load testing Citrix Desktop Client applications

I need to simulate multiple simultaneous users of an application using the citrix client desktop for Great Plains 10.
We are moving from local desktop client installs of GP to citrix clients in a VM environment, and there is a concern about performance for the users.
How can I setup and perform such a simulation?

I should also note that GP is a Microsoft company. A Microsoft Partner can get you set up with a test center that can emulate your test needs outside of your production systems. This may be the best approach and the most cost-efficient. They
can usually set up a full virtualization of your network environment and run tests that will tell you what to expect.
Consider that GP scales well with Citrix. GP should easily follow the rules of resources demand for users as "superusers' Those rules are dependent on the hardware and can be gotten from Citrix. You should start by doing the arithmetic.
If it missies by more than negative 20% you will need to research with the hardware vendor on how to set up the analysis more accurately.
I have done these exercises for mid-sized platforms. They can be don in two to three days of research and math. Once you are in the ball park you can still look at a test. At least the test will not be telling you that your hardware is
less than 50% of the n3eeded capacity. You can discover that with match and research.
¯\_(ツ)_/¯

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

SAP CRM 7.0 - NWBC desktop client

Hi all,
we are on SAP CRM 7.0 (NW > 7.02) and NWBC 3.0 - 3.5.
In my understanding there're two ways to use SAP NWBC . By using (NWBC desktop client) and/or (NWBC for HTML).
We have assigned the CRM Business Role and then the PFCG role to a test user. If this user use NWBC for HTML the business role content is displayed correctly. Using the NWBC desktop client is not showed the same result. Is only displayed the business role name. Same behavior also by using the standard SAP business roles and PFCG roles.
Seem that the NWBC for desktop don't manage the UI service entries in PFCG menu (generated through CRMD_UI_ROLE_PREPARE report).
We are doing something wrong?
Many thanks.
Massimo

Hi Maikel,
many thanks. I don't receive an error message like this.
§ http://help.sap.com/saphelp_tm80/helpdata/de/90/18acafde5941b1ab70bd25acfb6517/content.htm
Then I suppose is not related to the NW version. But I will check.
Thanks.
Massimo

Office 2013 - RemoteApp & Remote Desktop Client

When launching Office products from the Remote Desktop Client with Remote Resources / RemoteApp in OSX Mavericks. e.g. Office Word 2013 it is extremely slow and unresponsive. It opens to fill the screen but not full screen, cropping above the dock and below
the MAC toolbar. This is not apparent in Windows Surface Pro / RT / 7 / 8, Android, iPad / iPhone iOS
If I restore down the Window it seems to remove a white outer bar and then works as intended, even if I manually click and drag more or less to the same size of the maximised window. I believe this may be due to the Office 2013 shadow. In GPO I have:
- Added a registry to DisableAnimation
-Enabled 'Disable Office Animations' in the Office 2013 ADMX
-Enabled 'Do not use hardware graphics acceleration' in ADMX
Before:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=zfEfs30OKP8jaTL5vAjZBnFqPefGBcD4nNUqZHs3JAs%3d&docid=05b1d2a4c002e4152844656608eef7a9d
After:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=9aUKxic763dU7n2z3vxSDBkbXhyDo%2fo3P0jrEh08gtw%3d&docid=092297a567b51448e98ea674e3fab97f6
I am running:
OSX Mavericks
Mac Retina
Server 2012 R2
Kind regards,
Bobby Moore

Hi Bobby,
Let us start with opening Word in its application safe mode. Follow these steps to do so:
Hit Windows key on the keyboard, and start typing
winword /safe in search bar and hit Enter.
If the application works fine safe mode, try disabling the add-ins for the application and check the result:
Click the File tab.
Go to Options.
click Add-ins.
Select or clear the options that you want.
unchecked the add in like send to Bluetooth and something regarding office one not.
Let us know if you need further assistance .

Remote Desktop Client 8.1.3 Display Issue

We're running Microsoft Remote Desktop 2012R2 services including a Gateway/Connection Broker/Licensing server and Remote Desktop Session Hosts servers. Our clients include Windows systems, iPads and iPhones.
Since the upgrade to Microsoft Remote Desktop Client for IOS 8.1.3 (which fixed our gateway connection issues using the previous 8.1.x IOS clients), we're still unable to use our iPads with a published application that runs a time clock to check
children in/out of daycare centers.
When launching the published application, the display does not scale to full screen. A portion of the screen contains a black bar around the bottom and to the right of the window. The touch control needed is hidden by
the black bar. This issue did not exist in clients prior to 8.1.x nor does it exist in Windows clients.
Using the Pan Control does not resolve the issue. If you activate the Pan control, the application is so magnified that you only see about 1/4th of the upper left of the screen. Moving the window around or pinch to zoom in/out does not resolve
the issue.
Note that we have also published Microsoft Office 2010, Adobe Reader, Calculator and network share folders. None of these apps experience the issue with a black bar hiding a portion of the application window.
Any suggestions?

Hi Dharmesh - Yes, we did reinstall the RD 8.1.3 IOS client on our iPads a few times. And to answer your question, we are using a childcare software from the following company:
http://www.procaresoftware.com/
Microsoft Office 2010 as a published application appears to be functioning correctly with the iPads, although it hasn't been extensively tested. Most of our remote desktop Office users are on Windows 7 systems.
I've notified the Procare Software technical support team of this iPad issue and they forwarded the information on to their developers. They are releasing an updated version of their software some time in the next week. They have enhanced
the resizing / rotation support for tablets in the next upgrade release, but are unsure whether our iPad display issue will be resolved.
If the issue is not resolved by the upgrade, they suggest we seek a resolution from Microsoft. In the meantime, Procare stated that I could share this information with you. They're also copied on this forum to keep up with your comments.
Note: After we install the future upgrade of Procare Software, I'll report back here with the results.
Regards.

Place a script on client desktops

We are looking to see if there is anyway way to push a script down to client desktops after a user logs in, we use a script to allow all of our clients to connect to a Windows shared location, but would like to know a way to put it on their desktops besides using the English.lproj folder, or if there was anyway that we could have the computer actually mount the drive and show it on the desktop that would be wonderful. We have looked around a bit but cannot seem to find anyway to do this.

If you are trying to get an volume to automount, why not just use MCX and manage a login item? You said the computers are bound, so the assumption is the users and groups and computers are on the OD system. If this is the case, select a group or a user and go to Preferences in WGM. When the pane comes up choose Login. Click on the Items tab and set it to manage always. Then, drag the share to the list box and check the "authenticate selected share point with user's login name and password." If you run WGM from a managed workstation this is easier. But you can do this from the server. You just need to hand edit the key from the all records inspector.
Now, if you really want to update stuff on the server, you need a little scripting work. First you need to deliver the payload to all stations and then execute a local script to place the content were you want. This is because all home folder paths are unique and it is possible to have more than one user per machine. Follow these steps as a framework.
1: Gather the payload and use the Copy Items part of ARD to send the files over to a generic location on all workstations. /tmp is a good location and I've used /tmp/ARDpush as the example.
2: Once the files are copied, use the script example below and send it to /tmp and then execute the script using the send unix command. Basically, you path it as /tmp/script.sh and set the user to root so you can get into the user home folders.
And that should do it. Items in tmp should be deleted on reboot so this is self cleaning. Here is a simple framework script. It is a simple script that identifies non-system users. If you have a default admin on the machine (and we all should), then the value is > 501 so we exclude the initial admin. If you need the changes on the admin account, then set > to 500. This works for OD and AD users since their UIDs are either > 1025 or > 1000000000.
I also used dscl as this should work on everything since 10.4. I have NOT tested this on 10.4 so keep that in mind. If you are still supporting 10.3, then dscl will need to be replaced with niutil.
---Create this script in a plain text editor and chmod 755 before sending it to the clients---
#!/bin/sh
# Define the path to the source files
filesToCopy=/tmp/ARDPush/
# Define the partial path for relative destination
whereToPlaceFiles=/Desktop/
# Get a list of user names that are above 500 or 501 if you want to exclude the admin
users=$(dscl . -list /Users uid | awk '$2 > 501 {print $1}' | sort)
for user in $users; do
# Iterate through all the users and get their home folder path
homePath=$(dscl . -read /Users/$user NFSHomeDirectory | awk '{print $2}')
# Perform the copy process
cp -R $filesToCopy $homePath$whereToPlaceFiles
done
# end of script
Hope this helps.

ADF Application on Windows Desktop Client

Hi,
I developed a small ADF Web Application and tested it on Integrated Web logic server. Is there a way by which I can make this program to run stand alone on a client PC with out Web logic server (In the same way as Forms 6i runs on 2 tier mode in client desktop connecting to a database server)?
Will ADF Desktop Application serve this purpose?
Regards

Thanks Timo.
Is there any documentation on how to deploy an ADF Desktop application as an installation pack for Windows?
Regards

Has anyone seen any issues with persistent Chat in the Skype for Business Technical Preview client? No Messages dispalyed.

Hi all,
We are testing out the new Skype for Business technical preview client
with Lync 2013 and although we're not really users of Persistent Chat, I wanted to install this feature too so I added a server pool just to check things out.
I can post and even search the history (which shows results), but apart from seeing my immediate post, when I close the room a re-enter I see nothing. I get a notifications that there are new posts, but clicking "Read" button also does nothing.
We're off for Easter and I wont have access to another Lync 2013 client until we return, so I'm not sure if there is just something odd with my installation.
I would be interesting to see if other are having this issue.
Cheers
Chris

<xmlns:texthelpns rwthpgen="1">I have asked Microsoft about this directly because it came up.</xmlns:texthelpns><xmlns:texthelpns rwthpgen="1"> It's a known issue that has been resolved, but the
version in which it's resolved won't be available until the general client release on April 14th.</xmlns:texthelpns>
<xmlns:texthelpns rwthpgen="1">Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".</xmlns:texthelpns>
SWC Unified Communications
<xmlns:texthelpns rwthpgen="1">This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.</xmlns:texthelpns>
Thanks Anthony. I was about to dig into troubleshooting a bit more based on Holger's response.
(sorry about the XML tag additions, I have no idea why these are continuously added to my quoted or edited posts. I thought I had tried different browsers with the same result, but will try again).
Chris

Configure Network Level Authentication for Remote Desktop client

We publish Remote Desktop in our Windows 2008 R2 terminal server.
However, in Windows 2008R2 , the remote desktop client will a lillte bit slow
I found out that if I modify the setting in default.rdp
authentication level:i:0
enablecredsspsupport:i:0
it will increase the speed a lot
however, how can I set all user use remote desktop will disable those feature as well?
Thanks

Hi Kenneth,
I suggest you to see similar thread "disable
Network Level Authentication Terminal Server 2008"
If above thread does not helps, seek help from RDS/TS experts in here.
Or wait until any of our moderator move this post to respective forum.
Thank you for understanding.
Regards, Ravikumar P

Lync 2013 Hosting Pack - cannot join external non federated meetings anonymously with desktop client

Hello,
I Have a setup of LHP 2013. We have been testing federation and connections to external on-premises meetings.
Right now users with lync desktop client (2013 and patched) cannot connect to external 3rd party meetings without using the ?SL=1 and using the Wep App.
Desktop Client gives error on log file:
ms-user-logon-data: RemoteUser
Authentication-Info: TLS-DSK qop="auth", opaque="58FBAFA0", srand="0B8651AD", snum="15", rspauth="b63e033e6376b48ec973718f7369e3b90b0d75ba", targetname="lyncfe2.hoster.fi", realm="SIP Communications
Service", version=4
Content-Length: 0
Via: SIP/2.0/TLS 172.20.10.7:49680;received="public.ip";ms-received-port=55863;ms-received-cid=48400
From: "cloud.testuser"<sip:[email protected]>;tag=8f59b0fb81;epid=c7d2e31185
To: <sip:[email protected];gruu;opaque=app:conf:focus:id:5P20J0SK>;tag=C258840F87FD8713D4ADE01307F32C5B
Call-ID: 386e091eb7794fb286b858984349fccd
CSeq: 1 INVITE
ms-diagnostics: 27000;reason="To-Uri Domain is not in the sender-tenant allow list";source="LYNCFE2.hoster.fi";appName="OutgoingFederation"
Server: OutgoingFederation/5.0.0.0
From some old post I have read that was a bug in Lync client that did not allow fail-back to anonymous login with non-federated lync organization, but this has been fixed long ago.
If I do setup a federation beetween the organizations the meetings connect ok.
Thanks for help!
BR, Jouni

Hi Johan,
Lync client in test has been fully updated.
I Think I found what was causing this. In my tests, I added and removed domains from allowed and blocked domains list, in tenant config.
First after tenant organization has been provisioned the AllowedDomains looks like this:
Get-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d
Identity              : Global
AllowedDomains        : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowAllKnownDomains
BlockedDomains        : {}
AllowFederatedUsers   : True
AllowPublicUsers      : True
SharedSipAddressSpace : False
And joining to non-federated meetings works correctly.
After fiddling with the allowed and blocked domains settings (adding and removing domains) settings look like this:
Identity              : Global
AllowedDomains        : Microsoft.Rtc.Management.WritableConfig.Settings.Edge.AllowList
BlockedDomains        : {}
AllowFederatedUsers   : True
AllowPublicUsers      : True
SharedSipAddressSpace : False
When I check what the "AllowList" keeps in, it is empty as it should:
$tenant = Get-CsTenant | Where-Object {$_.Name -eq "tenantname"}
$x = Get-CsTenantFederationConfiguration -Tenant $tenant.TenantId
$x.AllowedDomains
AllowedDomain : {}
If I set the AllowedDomain backup to original form meeting connections begin to work.
$all = New-CsEdgeAllowAllKnownDomains
Set-CsTenantFederationConfiguration -Tenant 10828ff2-165d-440f-9c00-6ce374ff0c6d -AllowedDomains $all
But now im just not very sure how I should setup the federation settings as per tenant/ExternalAccesspolicy/AccessEdgeConfiguration.. hmm..
BR, Jouni

Oracle Calendar desktop client connect to oracle database

Hi Expert,
my end user want to Oracle Calendar desktop client connect to our 10G databasae.
there are no TNS file in Oracle Calendar desktop client.
How to configure Oracle Calendar desktop client to connect oracle database?
Thanks
JIm

What are the contents of the SQLNET.ORA files ?(*Inside Oracle Developer*)
# SQLNET.ORA Network Configuration File: C:\oracledeveloper\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, ONAMES, HOSTNAME)
DEFAULT_SDU_SIZE = 8761
(*Inside Oracle Database*)
# sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Try to make a test:
Create an environment variable called TNS_ADMIN on your system, put the path for >>your TNSNAMES.ORA file and see what's happen.
e.g:
TNS_ADMIN=C:\Oracle\product\10.2.0\NETWORK\ADMINI'm sorry, I don't understand what you mean; how and where do I create an environment variable called TNS_ADMIN ?
I'm really not sure how to do this..
Thanks

BC4J EJB deployment ; testing deployment to 8i with client application

Hi,
Is there a way to to connect a java client application to a 8i deployed BC4J using the oracle.dacf.dataset.SessionInfo ? Can we do this using the JDev wizards - property inspector ?
(I've seen in the doc :"Testing a Business Components EJB Deployed to Oracle8i with a Code Client" but the given code
// setup application module variable
ApplicationModule appMod = null;
javax.naming.Context ic = new InitialContext(env);
ApplicationModuleHome home = (ApplicationModuleHome)ic.lookup(DeployedMod);
appMod = home.create();
does not contains any SessionInfo object.)
Thanks,
Xvc

Chris,
Perhaps you should be checking if the user you wish to deploy
EJBs to has at least JAVAUSERPRIV.
As SYSTEM
grant JAVAUSERPRIV to <user>;
Good luck
/Mark
Chris Jones (guest) wrote:
: Hi,
: I'm having a problem deploying an EJB to Oracle 8i with
: JDeveloper 2.0.
: I am receiving an insufficient privileges error in the
: deployment process when it reaches the stage Generating EJBHome
: and EJBObject on the server. I am logging in using the system,
: sys, scott or internal account and all still receive the same
: error. What role/privelege do I need to deploy an ejb to 8i?
: Thanks in advance.
: Here is a dump of the output JDeveloper produces.
: *** Invoking the Oracle JDeveloper deployment utility ***
: Scanning project files...done
: Generating classpath dependencies...done
: Generating archive entries table...done
: Writing archive...done
: *** Invoking the Oracle8i deployment utility ***
: Reading Deployment Descriptor...done
: Verifying Deployment Descriptor...done
: Gathering users...done
: Generating Comm Stubs...done
: Compiling Stubs...done
: Generating Jar File...done
: Loading EJB Jar file and Comm Stubs Jar file...done
: Generating EJBHome and EJBObject on the
: server...oracle.aurora.server.tools.sess_iiop.ToolsException: A
: SQL exception occured while compiling:
: oracle.aurora.ejb.gen.test_MyEJB.EjbObject_MyEJB : ORA-01031:
: insufficient privileges
: at oracle.aurora.server.tools.sess_iiop.ToolImpl.error
: (Compiled Code)
: at oracle.aurora.ejb.deployment.GenerateEjb.generateBean
: (Compiled Code)
: at oracle.aurora.ejb.deployment.GenerateEjb.invoke
: (Compiled Code)
: at oracle.aurora.server.tools.sess_iiop.ToolImpl.invoke
: (Compiled Code)
: at
: oracle.jdeveloper.wizard.deployment.EJBDeployMonitor.run
: (Compiled Code)
: at oracle.jdeveloper.wizard.common.ProgressDialog.run
: (Compiled Code)
: at java.lang.Thread.run(Compiled Code)
null

BT Cloud - Desktop client listing different folder...

Hello
I am experiencing a problem with BT Cloud's desktop client listing different folders to the browser version (both executing on the same Windows7 PC with same account details). BT Cloud application version 2.1.3764 58683eb bt_production.
The desktop client lists no backups of a new users home directory I have set up to backup (settings -> add folder -> c:/users/xxxx) whereas the browser version reports the directory, sub directory and files.
I have tried logging out of the destop client and back in, but the problem persists.
Has anyone else experienced this and does anyone know if there is a way to correct?
Thank you

thedon24 wrote:
My Windows 7 client used to work fine but I upgraded to the new version at the weekend, and now not only has the new version lost my previous settings for a backup folder, it won't let me add it back again.
I click the cloud icon then the 'Add folder' button then browse to the folder I want and click 'Select folder' button.
It accepts a folder on built-in drives (C: and D but ignores (no error or warning message) a folder on USB external drive F: which is the one I want.
Looks like a failure in regression testing.
Has anyone else had this problem, and is there a workaround?
Just a very long shot.
I only have a small number of files and folders in Cloud, as I'm still trying to come to terms with instructions - so far with success, as demonstrated by a recent system image restore. All files were preserved, after uploading them using the web version of BT Cloud. Even backup files were preserved.
It's just possible that if you had the f:/ drive unticked or not connected at some point, Cloud took this as a deletion.
You may just not be able to upload a deleted folder again. You do have problems trying to reload a deleted file.
Have you tried to rename the folder in the f:/ drive?

Test in business client, Desktop client disabled

Similar Messages

Maybe you are looking for