IPad Display Issue

Supposing that a future iPad has a bigger display than current iPad 2, will there be any compatibility problems with the apps? Will the image be still perfect as it is now?

It will probably work in the same way the iPhone screen resolution quadrupled in iPhone 4. Text will automatically look cleaner. Apps with high-res bitmaps will look great. Those not yet converted to support the higher resolution screen will still work fine as iOS will automatically scale the low-res bitmaps so they display correctly on the hi-res screen.

Similar Messages

  • Ipad display issue - replaced still not working

    I replaced a LCD display on iPad 1 thinking it was bad.  Turned this unit on and it is still not working.  Tried the display on another iPad and it works fine so I know it is not the LCD.  The ipad in questions is recognized in iTunes.  Backlight doesn't come one

    There is obviously a hardware problem and doubtful if anyone here will know what that is.

  • Remote Desktop Client 8.1.3 Display Issue

    We're running Microsoft Remote Desktop 2012R2 services including a Gateway/Connection Broker/Licensing server and  Remote Desktop Session Hosts servers.  Our clients include Windows systems, iPads and iPhones.
    Since the upgrade to Microsoft Remote Desktop Client for IOS 8.1.3 (which fixed our gateway connection issues using the previous 8.1.x IOS clients), we're still unable to use our iPads with a published application that runs a time clock to check
    children in/out of daycare centers.
    When launching the published application, the display does not scale to full screen.  A portion of the screen contains a black bar around the bottom and to the right of the window.  The touch control needed is hidden by
    the black bar.  This issue did not exist in clients prior to 8.1.x nor does it exist in Windows clients.
    Using the Pan Control does not resolve the issue.  If you activate the Pan control, the application is so magnified that you only see about 1/4th of the upper left of the screen.  Moving the window around or pinch to zoom in/out does not resolve
    the issue.
    Note that we have also published Microsoft Office 2010, Adobe Reader, Calculator and network share folders.  None of these apps experience the issue with a black bar hiding a portion of the application window.
    Any suggestions?

    Hi Dharmesh - Yes, we did reinstall the RD 8.1.3 IOS client on our iPads a few times.  And to answer your question, we are using a childcare software from the following company:
    http://www.procaresoftware.com/
    Microsoft Office 2010 as a published application appears to be functioning correctly with the iPads, although it hasn't been extensively tested.  Most of our remote desktop Office users are on Windows 7 systems.
    I've notified the Procare Software technical support team of this iPad issue and they forwarded the information on to their developers.  They are releasing an updated version of their software some time in the next week.  They have enhanced
    the resizing / rotation support for tablets in the next upgrade release, but are unsure whether our iPad display issue will be resolved. 
    If the issue is not resolved by the upgrade, they suggest we seek a resolution from Microsoft.  In the meantime, Procare stated that I could share this information with you.  They're also copied on this forum to keep up with your comments. 
    Note:  After we install the future upgrade of Procare Software, I'll report back here with the results.
    Regards.

  • PDF Document Display Issue - iPad Mini iOS 8.1

    I use my iPad heavily doing in-home sales. I rely on a combination of Box, PDF Expert, and Notability to retrieve and create information/documents.
    After updating my iPad Mini to iOS 8, I started having a display issue when trying to pull up my pricebook in front of a client from Box, where I've always pulled that document from. It showed me one page, and the rest were blank. I opened it in PDF Expert, thinking it was a Box issue - and this time the document was blurry. Being a good stubborn Irishman, I whipped out my iPhone 4 and opened the document fine in Box.
    Afterwards, I download DROPBOX, opened the file in iBooks, deleted applications and re-installed them - all with varying challenges and 0 results. The same document opens up great in my iPhone, just will no longer work correctly on my iPad Mini.
    Anyone else having this issue?

    Hey there Haparari,
    Welcome to Apple Support Communities.
    It sounds like your iPad is in recovery mode after running into an issue updating it to the latest version of iOS with iTunes on your computer. Take a look at the article linked below, it provides troubleshooting suggestions that’ll generally resolve that specific alert message that you’re seeing.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Ciao,
    -Jason

  • HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).  My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple

    My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).
    My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple Menu.  The “Settings” does however displays the General menu allowing me to see:
    Apple software:          7.1 (7003)
    Apple TV:                   Model No. A1464, Part No. MD199B/A
    Signal Strength shows 5 circles.
    It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video.  I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2.  Can you help please?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Calendar display issue after iOS5 update

    Everything went well with my first-gen iPad's iOS5 update. However, the issue I'm seeing now is that, sporadically, I will tap on the Calendar icon and there are no events displayed (the calendar always comes up in "Month" view). However, if I "turn the page" to the next or previous month and then come back to the current month, the events are all back. I turned iCloud off, thinking this was, perhaps, the culprit but this behavior still occurs. Again, this only happens maybe once out of every four or five launches of the calendar app but is still annoying nevertheless.iOS5 on my iPhone 4 is not doing this (not yet, at least...).
    I'd be interested in knowing if anyone else is experiencing a similar thing and if so, is there something I'm missing to resolve it?

    I just created a new thread about this. This has occurred twice now since iOS 5 on my original iPad. My default view is Month and when I launched the app on these occasions it opened to all dates blank. Frightened me at first thinking iCloud had wiped all my events out of my calendars however I discovered that if I changed the view to year, week or whatever the events were all there and remained when I switched back to month. So far this has only happened on my iPad and not on our iPhones all running iOS 5 or on our computers syncing through iCloud.
    We need to leave feedback about this. Seems to be an iPad only issue.

  • AIR + iPad retina issue

    Will the air to iPad retina issue be fix in the flas pro cs6?

    Hi guys,
    1) I'm currently running a trial copy of CS6, Air 3.2, and I get 'App descriptor cannot parse file' error whenever I try to modify the xml file.
    I'm just trying to remove the icon shine, which worked fine in Flash 5.5.
    <key>UIPrerenderedIcon</key><true/>]]>
    Also, I tried inserting the 144x144 icon, which published ok, but didn't seem to work. And that line of code later disappeared from
    the xml.
    2) My mac is Snow Leopard, so I take it I have to upgrade to Lion (do I have to buy it, or is it free to developers?!)
    If I then get the latest XCode, and target ios 5.1 with Retina display, will my apps still be compatible on devices with iOS 4?
    Thanks,
    Matt

  • I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

    I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
    >CURVEBALL!!!<
    The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
    I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
    Any other suggestions? Please help!

    Sounds like the device was dropped at some point and damaged as a result.
    Take it to Apple for evaluation and a replacement.

  • Display issue on brand new 2014 X1 Carbon Touch

    So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
    I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
    Link to image 1
    Link to image 2
    Link to image 3
    Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
    From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
    Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Display Issues with mini (Mid 2010) and LG L246WP

    I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
    I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
    The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
    I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
    The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
    Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
    To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
    I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
    It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
    I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
    I'm trying to determine the best way to work through this issue. *My questions are:*
    Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
    What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
    Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
    Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

    Hello EPWilson4984.
    I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM,  1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
    Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
    The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
    Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
    Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
    Mac mini  -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
    I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
    Any alternatives you may have come across? Please let me know, thank you.

  • Repeated iMac Problems, Display Issues now Kernel Panics

    I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
    About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
    My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
    The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
    Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
    I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
    But this morning, this is what I woke up to:
    http://img97.imageshack.us/img97/7436/photoijr.jpg
    The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
    The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
    Here are my specs on this computer:
    2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

    Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
    - I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
    - I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
    In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
    I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
    With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

  • My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly.

    My iPad won't let me sign into my Apple ID when I try and download an app it asks for my id and password and when i type it in the iPad displays a message saying cannot connect to iTunes Store. However when i do this on my phone it works perfectly. Even when i sign in and out.
    Has anyone else had this problem? If so how can I fix this?

    Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it.  So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
    Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID).  If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections.

  • Bizarre & Random Dashboards Display Issues/Errors

    Hello,
    I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
    Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart.  Has anyone experienced this or have any idea what could cause this? It is very frustrating...
    Thanks for looking,
    Gary
    Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
    Green line missing dot on last end point
    In this example there are no dots on the yellow line or green line
    In this example the blue line has turned into massive columns extending across the charts

    This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

  • Multi User Calendar Display Issue

    When we moved to GW2012 one of our departments that uses a Multi User calendar (5 users in total) noticed some strange display issues.
    When User1 is looking at her Multi User Calendar, the client is displaying her appointments in User2's column as well. But if you look at User2's Multi User calendar, you don't see any of User1's appointments in User2's column, so it appears to be a display issue with User1. This same issue is happening with one other user.
    All users are on Client 12.0.2, Build 108211 . Interestingly if we look at the calendar on a machine running the GW8 client this display issue does not occur. I have also gone as far as rebuilding the calendar from scratch but this hasn't changed anything.
    Any suggestions?
    Thanks!
    Steve

    Hi
    If you open a Service Request with Novell Technical Services you will receive this Field Test File patch for the GroupWise 2012 Client. It is specifically to fix issues with multi-user calenders. Please let us know if you are in a position to open an SR.
    Many thanks.
    Cheers,

  • HT4060 Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged informatio

    Cannot get iPad 2 charged beyond 1%.  All charging ports tried: AC adapter(s), USB 2 port on MacBook Pro. ITunes shows iPad only for a few seconds. iPad displays alternately: Apple logo, battery w/slim red band, then battery w/1% charged information. How can I get it to charge beyond 1% so I can proceed to troubleshoot?

    I have had your exact problem with my old 3GS, now I cannot even get it to turn on, I still see that it is supposed to be charging though, but it never charges any so it seems.
    I replaced the Lower Dock Connector Assembly back when it still charged while hooked to my PC, and it found it made no real difference.
    http://www.amazon.com/gp/product/B003Y5YXLK/ref=oh_details_o05_s00_i00?ie=UTF8&p sc=1 
    At this point I am not sure if I should replace the battery and hope for the best, or just junk the phone, I cannot really sell it if I cannot reset it...

Maybe you are looking for