IPhone 6 rings once...then goes to voicemail

This started yesterday. Incoming calls ring once then go to voicemail. Any ideas?

Next step would be resetting.
Start by holding the home and sleep button for about 10sec, until the Appel logo comes back again. You will not lose data doing a reset this way, but it can cure some glitches.
If this does not help, resetting the network settings would be the next step. Go to Settings/General/Reset/Network settings to do that.

Similar Messages

My iPhone 4S rings once and goes to voicemail after the os 7 update. Has anyone experienced this problem? How do I fix it?

I updated my fully functional IPhone 4S to OS7. Now when someone calls it rings once and goes to voicemail. Has anyone had this problem? How do I fix it? And yes I have restored my phone and reloaded it twice, still *****. It has turned into a Microsoft product.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Phone rings once then stops.

Greetings everyone.
There seems to be a strange old problem with the phone. Whenever someone tries to call, it rings once then goes quiet. I did a test from my mobile and it seems that somehow the phone gets 'picked up' by magic for a few seconds, cos my mobile got charged for it!!
Before you ask, I tried to old test socket and same result.
Tried the 2 phones we have independently and the same result.
Disconnected the home hub and the same result.
Regarding dialling out, it seems 100% fine, so this problem is a strange old one!
I called the BT fault line and the person said it MIGHT be related to my equipment and I'll get charged if I call the engineer. Hopefully, that won't be the case cos I booked the engineer already!
It would be much apperciated if anyone can help me regarding the fault, or whether I will be charged or not for the engineer appointment.
Thanks.

Hi Dave
Many thanks.
I do not have the type of socket that allows the test you describe. I have explained this to BT India numerous times but always get asked to carry out the test. I had two ring trips this morning and so again rang BT and this time asked to speak to customer services. After some haggling they put me through. However, BT customer services refuse to become involved in line faults and I was transferred back to India, where I was once again asked to carry out the same ritual tests. The end result was that they would 'monitor' the line over the weekend (whatever that means). In the meantime, I received a ring trip call at 17.15 which rendered the line unusable for the next two hours. We checked the line every hour and it was working again two hours later. What I can't understand is that we had an engineer visit about two weeks ago, he said he detected a fault at the exchange but he did not replace the socket we have with a modern one. Who is responsible for this?
Thanks again for getting back to me.

HT4515 How do you adjust how long the iphone rings for before going to voicemail?

How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

I believe you do that through your phone service provider. I wonder if you have unheard messages in your voice mailbox. I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
I do not believe you can change this directly on your iPhone.

Landline rings once then stops

Hi - Had this problem for some time but whereas it was intermitent, it has now become almost permanent.
As the title states, the phone rings once then cuts out. If i answer before it cuts out then i can speak to the caller.
No problems dialling out.
I also notice that when someone calls, the broadband light goes off for about 30 seconnds.
Also sometimes it does not ring at all and an "error in connection" message will be displayed on the callers handset.
If i don't answer in time then phone connects to caller after about one ring.
I have done some tests-unplugged everything and plugged phones directly into master socket (behind cover plate)
Phone works ok when i do this.
Any help appreciated.

wayne2467 wrote:
Yes there are-- quite a few wires in master socket of which one green an one brown ( on opposite sides) seemed a bit loose compared to other wires. At one point these came out when i took the face plate out which resulted in no dialling tone or BB.
I managed to get them back in but not sure if they are making good if enough connection or even if this would be a possible cause of the problem.
Yes, quite possibly the cause of the disconnection when an incoming call arrives.
Only connection numbers 2 and 5 are needed, as 3 and 4 are no longer needed, and can upset your broadband.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

FaceTime call to my iMac will only ring once then hang up and won't let me answer. How do I make it ring more times?

FaceTime call to my iMac will only ring once then hang up and won't let me answer. How do I make it ring more times? I can call my iphone 4 from the imac with no problem but when I call my imac from my phone, it won't let me answer.

This article is pretty long but it has a troubleshooting guide near the bottom, and especially mentions your problem with a few things to try.
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-facetim e-set-up-use-and-troubleshooting-problems/

5c phone only rings twice befofre going to voicemail

My iPhone 5C only rings twice before going to voicemail.

Hello, cat16151.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues making or receiving calls.
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Cheers,
Jason H.

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
Thanks. Hope my other question has an answer out here.
Paul H

Why does my iPhone only ring once?

Why does my iPhone only ring once or not at all on incoming calls?

It is probably because you have switched off the notifications alerts.
Check in settings-notifications center-message and there select the alert sound.
Reply if it helps out

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

solved phone in do not disturb mode

My iPhone 3GS has stopped Ringing and only now Vibrates. Any ideas please to what the fault maybe or how I can get the ringing back. I've checked settings and all ok. The other day it did ring once then went to vibrate

Recently my iPhone 3GS has stopped ringing all of a sudden. I've checked the settings and nothing has been changed. I've also made sure the switch on the side is not on silent/vibrate too.
The other day it rang once then went to vibrate.
Anyone have any idea?
The phone is just over a year old too
Would be grateful for any help

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

Phone is not ringing flashes then goes straight to missed calls

People ringing often say my phone sounds like I am abroad, never rings just flashes up once on my phone then goes straightto missed calls. Helpdesk have twice re set phone makes no difference so given up with them. Anyone got any idea? Its an iphone 4. Thanks

Hi,
My Galaxy S5 has done this 3 times today (at work) so I can only assume EE are messing with the network again.
Try restarting your phone.
Thanks,

Centro rings once, pauses 25 seconds and then goes to voicemail.

Subject pretty much says it all. When someone calls my Sprint Centro they hear one ring, followed by 20-25 seconds of silence, and then voicemail.
Spent hours on the phone with Sprint trying to figure this one out and no luck. Even did a hard reset of my phone which didn't help. Sprint temporarily did an ESN swap back to my old flip phone and it works great. So the issue is definately Centro related.
Anyone ever heard of this happening?
Post relates to: Centro (Sprint)

Nope can't say I have heard this before, but I will say just because it was working on your flip phone and isn't on your Centro doesn't mean its not a carrier issue. Your account could be working properly for standard phones but not have the proper provisioning for the Smartphone, to really tell if it is a device issue you should either have Sprint reprovision your account or have someone (possibly a friend) who has a smartphone that is working transfer do a esn swap and see if their account works fine on the phone.
Post relates to: Centro (Sprint)
Message Edited by HardBeatZ on 07-26-2008 10:48 AM

My phone does not ring when receiving a call. It then goes to voicemail and doesn't show a missed call.

I have an iPhone 4. When someone tries to call me, the phone sometimes(most of the time now) does not ring. It will roll over to voicemail but does not show a missed call. Has anyone had this same thing happen and how did you get it rectified?

My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks

I have a standard ringtone on my iphone 4 that only rings twice..How do I increase to 4 or 5 rings before it goes to voicemail?

I have a standard ringtone on my iphone4 that only rings twice..How do I increase to 4 or 5 rings ?? Settings app only lets me increase volume..

You can do it manually - it's a bit of a fiddle but it works. You need to specify the length of time in *seconds* that you want your phone to ring, before voicemail kicks in. This article describes how to do it step by step - I've followed it and it works perfectly
http://www.iphonefaq.org/archives/971382
Hope that this helps
Sally

IPhone 6 rings once...then goes to voicemail

Similar Messages

Maybe you are looking for