Ipod screen lights up but is blank. can't turn it off. what can i do?
ipod touch 4th generation screen light up but the screen is blank. we cannot turn it off. any suggestions?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??
Then the SIM may have failed. Try removing and re-inserting it. If that doesn't fix it, you will have to get the SIM replaced by your carrier.
-
my iPhone 4s doesn't work. i can not swipe to open it or to even turn it off. what can i do??????
I would attempt a reset. This is done by holding both the powerbutton and the home button for about 10 seconds for it to restart.
When it boots back up, test the issue. If the issue persists, I would then recommend a restore through iTunes on a computer, set up as new, and test again. If it's now working, i'd recommend to restore from your last back up see if it resolved your issue.
Hopefully the first reset solves it, in most cases it does.
Regards -
HT1212 my ipad seems frozen I can't enter the passcode or turn it off what can i do?
my ipad seems frozen I can't enter the passcode or turn it off what can i do?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
IPod Screen lights up but just white?
when I turn on my iPod the screen lights up and when I touch the wheel I can here it clicking but the screen doesn't show up except for lit up white. The music does play but does anyone know what I need to do to get my screen fixed?
Dell Windows XPI have same problem But how can I change contrast when I don't see menu? Do you know how?
iMac Mac OS X (10.3.9) -
TS1382 My 160GB iPod screen shows a red x with a red circle around it, what can I do?
My 160GB iPod screen shows a red X with ared circle around it, what can I do?
Hi there kodi_abbott,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/ts1463
-Griff W. -
My ipod is disabled and will not let me turn it off, what can i do?
I forgot my passcode on an old ipod. it is now in disabled mode. It tells me to connect to itunes, but itunes wants the password I don't have. I tried to turn it off so I could restore it to its original factory settings but it will not turn off. Help please!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
I can't turn it off and can't connect with iTunes
I can't turn the iPod Touch 4 off and can't connect with iTunes
When I try to connect with iTunes, it said because of some unkowned error occurred (0xE8000065)
Please HELP!!!!!!!!!!!!Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting -
how do i get the screen to work again? Or is my Ipod just broken?
reset the ipod, hold both the power and lock buttons for 10 seconds after the 10 seconds stop holding the buttons. IF this didn't work restore your ipo. 10 POINTS please.
-
My white macbook will not start up. On pressing the start button the screen lights up but remains blank. Help!
G5 has these hardware issues:
-- bad capacitors on logic board
-- bad capacitors in power supply
-- badly soldered video chip
-- "There were several Mac models with flat panel displays that had bad displays.
Most had serial numbers beginning with "W8"---the code for one specific factory.
This affected PowerBooks as well. If that's the case, the rest of the computer
is probably fine." by Allan Jones in
https://discussions.apple.com/message/21630224#21630224
Google: g5 capacitor replacement kit
More info on capacitor replacement kits
http://jimwarholic.com/2008/07/how-to-repair-apple-imac-g5.php
http://thecapking.com/applg5.html -
My I pod crashed and now displays a blank yellow screen i can't switch it off what can I do.
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
MY IPAD MINI HANG AND CAN'T TURN IT OFF
My iPad mini hang and I can't turn it off, what should I do?
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
I have an Ipod Classic and currently the screen lights up but no information appears - just a blank back lit screen.Any ideas how to rectify or is it beyond saving?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....
It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
http://support.apple.com/kb/HT1661
Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
Jan -
IPods screen went black but assisted touch on screen still works?
IPods screen went black but assisted touch on screen still works? What's would be wrong?? I have dropped it and the lower volume button went partly in side the IPod (thats why i had the assisted touch on) and its been working very slowly fore the last week or so. but other then that it was fine.
With the information given, If the screen is completely black even after the reset, it's sounds as a hardware issue
Could be : The battery
The charger
The phone itself
You can narrow these down one by one preferably.
-If you have an extra battery, test it.
-Try another charging cable or another outlet
If neither of those affect it, you can also wipe the phone, but that's pretty much the last last step you should do since it erases everything. Then restoring it. Time varies.
If you are still having trouble, contacting your carrier, the closest Apple Store, or the technical support line for Apple.
Maybe you are looking for
-
I have a T61 which has Intel graphic card. It is seven years old and at times has a noisy fan. Very recently it started to have problem with its LCD, it starts with slight flickering of light intensity from corners of screen, here and there, eventual
-
Multi monitor issues with resolution(?)
At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server. One user has got issues with his multi monitor setup. The connection settings seems to be OK. I
-
I haven't successfully uploaded files to BT Vault since 2009. I can see from the vault that my old files are still there, however if I send any new files using the Autoback up they are unsuccessful. I have tried sending multiple and single files. I
-
Installation Adobe Photoshop Elements 12 stopped
The installation atopped at the point where systen wanted to install shared technologies. Tried to restart and restart install, now it onlly wants to remove items it can not find ('empty path') so re0installation is not possible.
-
Battery issue after upgrade to iOS 5 on 3GS
After the upgrade battery level goes from 100% to 0% in 5hrs basically in standby. I have turned off push services, data connections, icloud...everything. iPhone still drains battery and gets quite hot. Any suggestions?