Is it really worth to update to 2.2 or wait till the bugs(if any) are fixed???

There are many of us here, still a bit confused after reading many threads, to install the new Froyo update, when available.
Is it really worth this update to 2.2 or wait a few weeks for the bugs(if any) are fixed???

Ranked in order of annoyance:
1. Takes longer to charge I would say almost double
2. Battery life is worse with use, standby seems to be the same. WiFi radio definitely uses way more than it used to. I used to leave it on and always leave it off unless needed.
3. Scrolling on flash sites very slow.
4. We already had flash "lite", flash 10.1 does not seem to be any better at all.
5. Crammed more bloat ware onto the device.
Pros: (no order)
Device is faster just a tad, but not enough to justify the loss of battery
Flash light app is good
HD recording seems about the same as my other 720 so its just nice to have it
App to SD is not really a benefit with Incredible because we have so much app RAM on the device anyway
Auto update from Market
Chrome to phone is great!
Wireless N is good but really no benefit due to battery use
New voice search/integration
That's my 2 cents
Ranked in order of annoyance:
1. Takes longer to charge I would say almost double2. Battery life is worse with use, standby seems to be the same. WiFi radio definitely uses way more than it used to. I used to leave it on and always leave it off unless needed.3. Scrolling on flash sites very slow.4. We already had flash "lite", flash 10.1 does not seem to be any better at all.5. Crammed more bloat ware onto the device.
Pros: (no order)
Device is faster just a tad, but not enough to justify the loss of batteryFlash light app is goodHD recording seems about the same as my other 720 so its just nice to have itApp to SD is not really a benefit with Incredible because we have so much app RAM on the device anywayAuto update from MarketChrome to phone is great!Wireless N is good but really no benefit due to battery useNew voice search/integration
That's my 2 cents

Similar Messages

HT4623 I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store. They are grayed out with the word "waiting" underneath the app. Any suggestions?

I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store. They are grayed out with the word "waiting" underneath the app. Any suggestions?

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

HT2371 I updated my 4s with ios7 and now the icons in safari are in chinese and when you onit so is the site. But the rest of my phone is in English. How do I fix this?

After updating my 4s with ios7, my safari links are in a different language. How do I fix it?

Tap the Bookmark/Favorites Icon; select Favorites; tap on "edit" at the bottom right side of the drop down; tap the red circle with white line and tap delete for each favorite you don't want. Then you should be able to add your favorites in English, or whatever language you want. Hope this helps.

I am trying to update my macbook from osx10.6.8 to the free update but it says it can't update my computer even though it fits the standards. Any one have this problem?

I am trying to update my macbook osx 10.6.8 to the free update and it says it cant update it. Anyone else have this problem and if so have you found a solution?

The point in reference, regarding an offer of something 'free' could be any kind of upgrade to software, a newer version of browser, an adobe flash player, a supported version of OS X from the Mac App Store, etc. With an Apple ID one can access the online stores from OS X 10.6.8.
So, one has to be specific, and also detail the computer configuration and specifications so as to help confirm what kind(s) of upgrade may actually work with the hardware vintage of the computer. The Model number, build series year, is it an Early, Mid, or Late (year) model?
These factor in hardware differences and what kinds of OS X version or other software may or may not work in the computer. Also, an upgrade of RAM may be needed for some software upgrade or system upgrade, to work correctly. While your computer may be unable to upgrade to Mavericks 10.9.2.
If too old, it may do OK with Mountain Lion 10.8.5, or maybe Lion 10.7.5. Some users with an older Mac prefer 10.6.8 if it works well and they have applications that run on there; older applications may not run on Mavericks 10.9.2... Or maybe the Mac won't like it. Make a backup before upgrades.
•Mac OS X Support:
http://www.apple.com/support/osx/
•Apple - Support - OS X - Upgrade:
http://www.apple.com/support/osx/upgrade/
There's a lot of information available in Support pages.
Good luck & happy computing!

Updated to iOS 7, lost appointments in the calender, can any one tell me how to access or retrieve previously inputed appoints?

This for missing appoints in calender when updated iPhone S4 to iOS 7.

I miss fired on this one, appoints now appear on calender, guess it took some time to download them after update to 7. Still can't find the old "List" view though.

Hi, my ipod will update, and when its almost finished..itll stop and say that my ipod touch cant back up...i tried today to update to 5.0 but it did the same thing, any ideas how to fix it? thanks

i need help!

If yo mean the iPod will not connect to your wifi network:
Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Since recent app updates my Money dance app (via Apple) will not open, any ideas please.

The programme worked perfectly until Sunday when two apps updated, it no longer opens.
Around the Money Dance icon are little white circles that were not there before.

You get an email sent to you for every purchase you make in iTunes. Check your email history. you should also have a credit card record if you didn't use an iTunes Gift Card.
Second, Navionics posted an update to the app February 11, 2014. If you have not updated already, you should do so.
If that doesn't work, contact Navionics directly for support with their app: http://navionics.com/en/customers

Upgrading to 2G, Is it really worth it?

I have the 1st generation iphone and wanted to upgrade to the 2.0 firmware but i have been reading all the problems you guys have been dealing with after upgrading. So it it really worth. I am really thinking about getting a blackberry. I have been doing some research on blackberries and most of their models do everything and more that the iphone 3g does. Has anyone ever had a blackberry and could tell me any problems they had with using one? Thank You and good luck to you guys that are having problems.

2.0 applications are nice, I also noticed the battery draining faster,however I have been using the poker game alot and IM. just turned push off as others suggested.I guess if you just want a phone for calls, and you cant charge in your car or elsewhere you might not update the software.My phone is over a year old (day one) and the battery is losing its edge a bit?

Is the x86_64 really worth it?

OK, well i have herd both good and bad things on the arch linux x86_64. i just want to know is it really worth it if your computer can run it? or will other software come up todate with it, its actually pretty said though, that 64 bit os's has been out for some time now, and we still dont got wine, firefox, and simple thing like adobe fully working? should i go down to 32?

ace_w1zard wrote:OK, well i have herd both good and bad things on the arch linux x86_64. i just want to know is it really worth it if your computer can run it? or will other software come up todate with it, its actually pretty said though, that 64 bit os's has been out for some time now, and we still dont got wine, firefox, and simple thing like adobe fully working? should i go down to 32?
64bit firefox works fine. 32bit wine and flash both work fine on 64bit installs, the bin32 packages are in AUR. Pretty much any apps that don't have native 64bit versions have bin32 packages in AUR.
Adobe flash actually does have a 64bit build but adobe neglected to update it this past release cycle and the version thats availible has known and actively exploited security vulnerabilities. This is why its reccomended to use the bin32 version.
That said the only time youll probably ever notice a performance difference between 32bit and 64bit is with CPU intensive aplications, such as video encoding.
EDIT: Also you should search the forums before making posts. This topic gets brought up like once a day.
Last edited by tjwoosta (2010-07-14 06:05:25)

Is It Really Worth It

I have a new computer released right before Leopard came out. Is it really worth changing. What are the differences?

I second what Mevieth says. I would wait a few months for the bugs to be worked out. On the other hand, if it's your Powerbook you are planning to update, I spoke with a friend who loves the 'spaces' feature's ability to create multiple desktops for his powerbook . . . I have dual monitors on my G5 so it's not a big deal, but he loves it.
I upgraded due to the increased performance of OpenGL . . . for which my apps (After Effects in particular) have yet to catch up. So, if you have a specific reason to upgrade, double check and make sure it makes sense, and then upgrade if it does.
I probably should have waited. It would have saved me some stress.
CMF

Is it really vital to update N95 Firmware? Come up...

Is it really important to update N95 all the time to the latest firmware version?
What have those gained who updated to latest version, and what have those lost who are using the previous versions.
Is it really worth considering to update N95 while taking into account all the risks of phone turning into brick during process, non-functionality of all the previously installed 3rd Party software, and many more complications?
Does the new software really bring about dramatic changes to the N95 stability, start-up timings of the Java applications, improved menu structure, battery life etc. The presence of Flash Lite 3 may not be the key factor in updating N95.
What are the main plus points for N95 users to update their phones and
what are the main negative points that they should not go to update.
Please take part to discuss your good/ bad experiences in this regard in order to make other N95 users clear as to what should be done.
Regards
Ejaz

I used NSU to get 21.0.016 and I am happy I did it. The biggest improvement was with the WLAN connection, the old fw often failed to find my hidden home network, new fw has never missed it.
Previously the browser couldn't load webpages that were more than about 1.5mb and often crashed with multiple windows open, but now the browser works just fine with 4mb pages and multiple windows.
The only 3rd party sw that I had paid for was a game (Medal of Honor - what a waste of money that was) and that still works, but I did lose some of the free apps I had installed.
So yes, if you use the browser a lot over wlan than I'd say it's vital.
All those who believe in psychokinesis raise my hand.

Is the 16 gig really worth $100 more?

I just sold my Ipod 5th generation on ebay. I got $175 for it. (I sold it with a external screen also)
I was going to buy the $199 Ipod touch which would cost me $25. Then I was thinking about going from 30 gig to 8 gig and realized that really does not hold a lot. For $100 more is the 16 gig worth it?
Do many of you have the 8 and are you happy with it or do you wish you had more space?

I have the 32GB iPod touch, and it still has 12.4GB left after putting a bunch of stuff on it(But I only have 824 songs, unlike most people). The good thing about all the space is that I don't have to sync it until an update comes out or I want an app that is over 10MB. An ever since the 2.0 update, my iPod touch has been really slow to update. So It's good to have ALL of your iTunes media on your iPod. Also, if your computer crashes, you can use a third-party program to take the content from your iPod touch and put it on a new computer.
So... You have a backup of your iTunes media, AND you hardly ever have to sync you iPod.
At least get the 16GB, but you might wanna go ahead and get the 32GB.
-Messymeese

I really wanted to update my iPhone 4 software version 5.1.1 to be version 6.0.1, can you help me on this?

I really wanted to update my iPhone software iPhone 4 version 5.1.1 to be version 6.0.1

And there is some reason you can't? See the Apple article below.
http://support.apple.com/kb/HT4972

TS1702 My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new

My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new.

Sorry guysy iPhone says unable to download application at this time and I try all day and it still won't let me download no matter how hard I try.

Macbook Pro 13' (Late 2011) STILL really slow since updating to Mavericks

So I've seen a lot of discussions about the same issue and some have threads have been solved, yet others remain unknown. I have the same problem as others that stated they have experience something similar to my case. Just fyi though, that my computer was already really slow prior to upgrading to Mavericks (on Mountain Lion). That was when I decided to do a clean install of Mountain Lion and everything was snappier than ever. It wasn't long until Mavericks came out and I instantly did an upgrade but everything suddenly started slowing down again and it's getting worse. I hope someone can help me out here, thank you.
EtreCheck version: 1.9.12 (48)
Report generated July 27, 2014 at 12:39:20 AM EDT
Hardware Information:
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 12:18:52
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Kenichi Kasamatsu (disk0s2) / [Startup]: 499.25 GB (154 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 70
Gatekeeper:
Anywhere
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.nero.HSMMonitor.plist Support
User Login Items:
iTunesHelper
Dropbox
UnlockID
Google Chrome
Android File Transfer Agent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeIn: Version: 1.0.935 - SDK 10.7 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Searchme: Version: 1.3
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Java Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      16% WindowServer
      15% Google Chrome
      3% hidd
      1% fontd
      0% Dropbox
Top Processes by Memory:
160 MB Google Chrome
135 MB softwareupdated
98 MB Finder
74 MB mds_stores
74 MB WindowServer
Virtual Memory Information:
321 MB Free RAM
1.52 GB Active RAM
1.20 GB Inactive RAM
977 MB Wired RAM
2.54 GB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Is it really worth to update to 2.2 or wait till the bugs(if any) are fixed???

Similar Messages

Maybe you are looking for