ISO UoM vs USA UoM for SO and Transfer Order

Hi to All,
I've an issue that I must resolve urgently!!! So, I hope in your precious advices.
Case: Customer Model: Holding with european company codes and americans ones.
The corporate is an Italian Company. So, Materials Master Data are created centrally at Italian Company; consequently the Base Unit of Measure in which stocks of the material are managed (Master Data: view Basic data 1) is expressed in ISO UoMs( Kg, dm3....).
I have the necessity to use also american UoMs so I've created in Additional Data -> Unit of Measure alternative TU and CU using USA UoMs for the dimensions (lb, "3....) in corrispondence to europeanTU and CU.
I can use them on Sales Order, and Transfer Order with type ZT02 STO Cross Company but I can't use them for ZT01 STO from APS: Transfer order intra- company becouse as default the Base Unit of Measure is used.
Does it exist a way to convert the Base Unit of Measure expressed in ISO UoMs to USA UoMs for dimensions without modyfing the Base Unit of Measure set in Master Data: view Basic data 1?
Thanks in advance
Roberta

Hi,
If you want to create any transaction with only alternative unit of measure you don't active variable active unit of measure in purchasing view of material master. In this field take not active.
Variable Active unit:
When you required to create any transaction with both unit of measure base unit and alternetive unit of measure you active it and if you want to create transaction with only alternative unit you don't active it.
NOTE: - In case of Purchase order system take order unit of measure(In Purchasing view) and for stock transfer order take unit of issue(Plant Data1) - If variable active unit is off.
Regards,
Mahessh

Similar Messages

User exits for delivery picking confirmation and transfer order creation

Hi
We have a scenario for which we need help.
This is to do with replenishment from plant to plant.
We have sales sets.
The sales sets needs to be replenished from one plant to another. We want the componenets of the sales sets to picked from the issuing plant. For this we need a transfer order. this needs tobe confirmed and then the goods issue should take place from the issuing plant. Its a two step process.
we are doing Sales sets in STO. The explosion takes place in STO. However when we create deliveries for this. Only the sales set header item without its components are flowing into the delivery.
The Tranfer order does not contain the components either.
However post the goods issue we can create a TO with reference to the TR. This is is not acceptable because we want the picking and confirmation to occur before PGI from the issuing plant.
Could anybody help: We want the TO to be created with the components even though in the delivery only the Sales set header appears. Can u suggest a user exit in which when we create the TR from the delivery the components of the set.
After confirmation of the TO then we want the picking status to be put as C.
Supreeth

Hi,
Check the following users exits.
MWMRFSSG            user exit for sorting TOs in RF system-guided transaction
MWMRFUP             Customer defined general purpose pushbutton called from scr.
MWMRP001            Cust. Exit for Fixed Bin Replenish.: Delivery Item Selection
MWMRP002            Cust. Exit for Fixed Bin Replenishment: TR Quantity Distr.
MWMRP003            Customer Exit for Replenishment using RLLNACH1
MWMRP004            User Exit for Replenishment using RLLNACH4
MWMTO001            Enhancements for end of transfer order generation
MWMTO010            Exit: Calculation of Total Planned TO Processing Time
MWMTO011            Correction of Planned Processing Time for TO Item
MWMTO012            Correction of Sorting and Split Transfer Order
MWMTO013            Stock Removal for Sev. Storage Types as in Stringent FIFO
MWMTOAU3            Separate selection of posting changes for autom.TO creation
MWMTR001            Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWMD0001            Transfer order print via RLVSDR40
MWMD0002            Transfer order print as multiple process with RLKOMM40
MWMIDI07            Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11            Enhancement for message WMTORD: TO with several items
MWMIDO12            Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13            Extension for WMMBXY (subsequent tasks after goods movement)
MWMPP001            Enhancement WM/PP Interface (automatic TR generation)
Regards,
Murali

Standard data sources for Delivery and Purchase order quantity.

Hi gurus ,
Are there any standard data sources available for Delivery and Purchase Order quantity in Purchasing area .
Thanks in advance .

Hi,
If you are looking for SD Scenario: Check this : https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Happy Tony

Colective Settlement and "CLSD"Status for Production and Maintenance Orders

Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia Moreira

Hi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli

Costing for Maintenance- and Service Orders

hi
Can any one tell me the Configuration steps for Costing for Maintenance- and Service Orders.
Kindly please guide me.
regards,
R.Ramakrishnaraj

Hi,
Please go through below mentioned threads.
Re: Activity Costing
Re: PM order costing.
Re: Planned cost not getting displayed in Maintenance Order
Re: Costs not appearing in service order
There are many threads available for Costing. Please search in the threads.
Regards,
Maheswaran.

Release strategyu for contracts and purchase order

Hi,
My client want both contracts and release orders (purchase order created w.r.t contract) must to go to release approval before procuring the material or service.
Is it possible to configure seperate release strategies for contact and purchase order?
Please let me know.
Thanks in advance.
Regards
Kishore.

Hi,
Thanks for your replies.
Characters for contract will be
1. Company code
2. Aggreement type
3. Target value
4. Purchase group
Characters for Purchase order will be
1. Company code
2. Dodument type
3. Net value + VAT(Gross value)
4. Purchase group
BASED ON THE ABOVE CRITERIA, PLEASE LET ME KNOW HOW TO CONFIGURE. Release strategy for purchase orders already existing in the system as mentioned above as per the mentioned characteristics. Now i need to configure for contracts only.
Please help me in this regard.
Regards
Kishore.
Edited by: Jyothula Kishore on Feb 2, 2010 7:37 AM
Edited by: Jyothula Kishore on Feb 2, 2010 12:01 PM

Report for List of Transfer orders in warehouse management

hi,
i want generate a report for list of transfer order orders in warehouse management
is there any report with you guys kindly help me,
or any standard report is there to display list of transfer orders in warehouse management
Thanks,
Rajesh
Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PM

Hi,
If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
Please let me know.
Thanks
Nagarajan

Release order for a stock transfer order in Product view

Hi Experts
My question is that i cann't see Release order for a stock transfer order in Product view which are available in MD04 in R/3.
I have checked all the settings for Strategy group 50-Planning without final assembly in R/3 and Requirement type in APO. In APO I have checked requirement type and category group and I can see that in category we have defined Stock Transport Requisition, Stock Transport order, Sales Order, TLB:VMI sales order, Replenishment delivery and VMI delivery as category.
One more thing i am not even selecting any selection profile for Product view.
What i need to check, Kindly suggest.
Regards
G C

Hi G.C
Check whether you have maintained correct integration model. Create integration model for transactional data. Select the sales order and PO/PR option in CFM1. The reason you need to send the sales order first when you are working with stock transfer order/stock transfer scheduling agreements you first have to send the sales order and then PO/PR. Activate the integrtion model.
First check in ECC for the Integration with Other mySAP.com Components==>Advanced Planning and Optimization==>Initial Data Transfer==>Change Transfer==>Change Transfer for Transaction Data==>Activate Online Transfer Using BTE==> here check (ND-APO, NDI options are have been checked)
Also check for the Maintenance of distribution definiton under APO -SPRO==>Integration with SAP Components==>Basic settings for data transfer==>Publication==>Maintain distribution definiton==>Select the publication type(External procurement, Delivery,Shipment) and assign to all the plants you are working with for STO.
Try the above steps and do let me know if it worked.
Regards
KRN

Unit of Measure(UOM) for PO and Packing

Dear all,
we have got issue about UOM for Purchase order and Packing.
When we create PO with vendor then we use UOM is set for example: sofa.
but when we GR from Vendor the storekeeper check artice follow UOM is Set. (packing).
pls help us

Dear,
Basing on your post - your stock keeping unit is SET.
Purchase order is SOFA.
Go to material master and maintain basic UOM as SET and Order unit as SOFA.
Whenever you are raising PO using this material, the PO UOM will be SOFA. Maintain the conversion factors if applicable.
One more way in PR - Source of supply tab you can mention purchase organization and order unit as SOFA (this wihthout making changes in material master). But everytime create PR indentor has to pay attention towards this entry.
Regards,
Syed Hussain.

Report for Pegging for forecast and sales order consumption(pegging)

Hi ,
Plaese help to create a report for the below
Requirement is there to have a showing Forecast (Number) and Sales order (Number) pegging Report
Means like to which forecast number the sales order number is consumed
Regards
Kiran

I have tested this on ASCP and I am agree with you. I am pasting one para from document...
"Oracle Master Scheduling/MRP and Supply Chain Planning calculates the ATP quantity of an item for each day of planned production by adding planned production during the period (planned orders and scheduled receipts) to the quantity on hand, and then subtracting all committed demand for the period (sales orders, component demand from planned orders, discrete jobs, and repetitive schedules).
Note: Committed demand does not include forecasted demand or manually entered master demand schedule entries. Also, the amount available during each period is not cumulative. Oracle Master Scheduling/MRP and Supply Chain Planning does not consider ATP quantities from prior periods as supply in future periods. "
Thanks and Regards,
Dipak

Badi/user exit for sales and purchase order

HI folks,
I have to export the value of order type to a memory id for create and change transaction of sales order and the purchase order, I serached a lot for badis in purchase order and created implementation for that, but it didnt work. Please help me out....
thanks in advance

Hi,
As written I need to export the value of order type into a memory id at the moment below transactions are hit:
va01,va02, me21n, me22n.
for va01 first u need to enter the order type and then press enter...at this event I need to export its value,
for va02 the value of order is entered and then press enter,
similarly I have to export the purchase order type during execution of ME21n and ME22n.
I hope u will understand the problem better....If not please tell me

I found information on how to transfer my library to a new computer. I am going to use an external hard drive for this and transfer my itunes folder to the new computer. I will then download and install a new version of itunes on my new computer. My q

I found information on how to transfer my itunes library to a new computer. I am going to use an external hard drive for this to transfer my itunes folder to the new computer.
I will then download and install a new version of itunes on my new computer.
My question is this. When I do this, will itunes have all my album artwork for all my library? My library has a lot of my own music and I have spent quite a bit of time copying album artwork that itunes did not add. I am really hoping I don't have to do this again!
Thanks for your help!

If you follow the directions in this Link...
Copy iTunes to an External Drive
http://support.apple.com/kb/HT1751
Everything should be carried across...

Exception message for PrdOrd and Planned order

Hi Gurus,
It possible based on prdord and planned ord we need to get the Exception message information. It's there any standard transaction code or any sqvi report?
Note:
Exception Message:
10 - Reschedule in
20 - cancel
05 - Opening date in the past
26 - Excess in individual segment
Please find this information in MD04 (single order). i am looking for same time multple orders with exception message report.
Thanks and regards,
Deethya.B

Hi
You can use MD06 with refrence to you plant and MRP Controllers. Also you can define your own traffic lights so that based on these you get your exception messages.
Hope this helps,
Regards,
Ravi

Mass update for production and planned order MRP controller

Hi Gurus,
It's anyway possible to mass update MRP controller for Production orders and Planned orders. If any please provide me step by step process.
Thanks,
B.Deethya.

I feel You have changed the MRP controller in Material master and want to incorporate same in production order & plan order.
For Planned order Run MRP with delete and recreate mode, system will create a new plan order with MRP controller in Material master
For production order, Mass change is not possible, create a simple BDC or LSMW, And change the MRP controller

SAME LAYOUT with different heading for invoice and service order invoice

Hi,
I need to use the same layout for printing both invoice and service order invoice. The layout should print the same data except the title should be changed accordingly ( invoice or service order invoice).
Please help me with this
Regards,
Anik

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

ISO UoM vs USA UoM for SO and Transfer Order

Similar Messages

Maybe you are looking for