ISP constantly Failing

I can connect to my wifi just fine but i cannot load webpages after about 5 minutes of turning my wifi on and off again, and sometimes that doesnt even work. Everyone else in the house can connect to the wifi just fine and I can connect to other wifi connections and use them as well, just not my home connection. I check diagnostics and everytime it says the ISP failed. Can anybody please help me fix this?
Late 2012 macbook pro
OS X mavericks 10.9.2 software

Having the exact same issue. Infuriating. All other apple devices in the house work perfectly on wifi (2 iphones, 1 iPad air, 2 ipod touches), except for my 2012 iMac, running OSX Mavericks

Similar Messages

Why do updates constantly fail ??????

why do updatyes constantly fail???????

Nobody can know. you have not provided any system info, program info and so on.
Mylenium

My ISP keep failing, its becoming annoying to keep using the diagnostic

My ISP is failing everyday all day. It is getting annoying to keep having to use the diagnostic tool to fix this issue. Why should I have to keep using a diagnostic tool to get my internet working. It is not the router as I also have a macbook air in the residence and the wifi network card do not behave in such a manner. It stays connected even if put into sleep mode.
Things I do not need to do so please dont come here and suggest a worhtless forum, I REQUEST A FOR SURE ANSWER. Everything below Ive already tried
I dont need to restart my router
I dont need to renew my address
I dont need to contact my service provider, it is not the router
I dont need to reset or delete my internet on my macbook
Its works very well in LAN connection
Its brand new
Funny thing is the problem persisted when I upgraded to Maverick
I restored my computer to factory default and the problem persist, thats how I know it may be something with maverick. For a minute I thought Maverick was for Apple desktops.
I called apple, they had me do a couple of resets
basically everything listed in these Apple forums do not help and is not needed to post as a fix.
I ask for help into a real solution as I am unable to visit an apple store for at least 3 weeks when I return to the US. Thank You.

Whoaaaa, you're from Birmingham Alabama? Off topic I know but I'm from there too, Roll Tide!!!
Yeah I changed the channel and the problem still persist. It's definitely something with my macbook. Since I am 7 hours ahead of the east coast my only thing to do is call AppleCare when they open. This problem is persisting towards numerous individuals as I searched on google. I am annoyed very agitated, disappointed and unhappy as I just transitioned from PC (Sony vaio)

Macbook Pro won't connect to internet, says ISP has failed.

For months I have not been able to connect to my internet at home from my MacBook Pro. I have tried restarting the router many times. All of my other devices, as well as my roommates' devices connect to the internet. My wifi icon at the top says that it has connected but that the ISP has failed when I refer to the diagnostics. I've tried countless troubleshooting articles and none have worked so far. Any suggestions?

Im going to answer my own question. Problem Fixed! After I was on the phone for over an hour with a senior advisor we found the problem was with the download or the instilation. He had me Shut Down Computer and hold down Command and R then press power button hold this down until the recovery window pops up. Then reinstall mountain lion os system. this does not wipe out documents, photos and apps like windows does. I didnt know this since Im new to MacBooks. Hopefully this may help someone else.
PS I beleive In order to do this you need to be plugged into your router to have internet access. They had me do this. This will take about an hour but now Im up and running.

Isp keeps failing every 5 minutes

My ISP keeps failing. I can go in network diagonstics and restart it again but sometimes every 30 seconds, the page will not load and the ISP fails. I do not have this probelm anywhere else so I know its not my computer. I have cleared the libary many times but the problem still happens. Is there some thing wrong with the modem? My room mates do not have this problem as I do. Please help!

Try renew DHCP lease.
http://support.apple.com/kb/ts1920
http://osxdaily.com/2013/02/11/renew-dhcp-lease-mac-os-x/

Computer freezing run assist for airport and isp is failed

computer freezing run assist for airport and isp is failed. Go thru assist me and then it will reconnect the isp... I reset my 2wire thinking that would help but no.

Without more information, it's hard to tell what's wrong... Obliviously something has changed in your environment, if it has been working just fine before. Still, I'd do some testing, step by step with psexec (running under system account like the TS engine),
add some logging on all of the steps and try to solve the problem that way. You really, really should consider using app model with single script (with your own logging) to deploy your application. If you don't know why it has to use AD account for installation,
I'd contact the vendor and ask, that's just silly way for an installer to work, or have you even tried does it work with system account? You could also use procmon to actually see what's happening under the hood when the installer runs (with the Ad account
and with SYSTEM account)....

IDM constantly failing...

Hi!
IDM java applet is constantly failing on my machine. Sometimes the applet isn't even loaded. And usually all the IE windows disapper. I'm using IE 6.0.2800.1106 with JRE 1.5.0_06-b05. I've added the "-Xmx256m" into the JRE runtime settings. Am I missed something? What browser are you guys using?

You mention that your ie windows just disappear. I had this exact same issue a while back and thought it was my PC. I got on another PC and had the same issue. I reimaged the sensor from the recovery partition and still had the same issue. Finally, I blew the entire image away and reloaded with tftp and then it worked.
I know this is not the ideal solution, but wanted to share.
M

Calls constantly failing / dropping / freezing.

I recently moved flat, downgrading from a 100Mb to 10Mb internet connection, which should still be enough to maintain Skype calls (and is playing Netflix HD absolutely fine), but every time I make a video call it constantly drops and freezes. Whilst I'm on Skype, other internet actions become very slow / fail, and my mac (2013 Macbook Pro running OS X 10.9.4) disconnects from the wifi.
Is there anything I can do to fix this? I know it's a problem on my end.

It is a issue Microsoft/Skype does not want to address. Yesterday, I spent 2 hours reading users posts related to this issue. Strangly, this issue is not resolved and surprisingly these issues are left untoched by forum moderators.
Users have posted these issues from all corners of the world and their numbers in thousands but Skype/Microsoft is turning deaf ear to their whole clientel.
I don't know how to reach Bill Gates to report this issue. Haha. I am sure he is not using Skype otherwise he might have fired whole team.
I have seen some posts wherein they point fingers at ISP of the user. Are all ISPs in the world blocking Skype. Lol
They know internally that the problem is within but don't want to annouce it which is very unfair. People have active subscriptions and paying money to talk to their loved ones and still going through pain and agony as they are unable to communicate with them.
What a mess!!!

Why do my updates constantly fail!!!????

This is VERY frustrating, and seriously making me lose the admiration I've always had for Adobe.
My Creative Cloud updates fail constantly. They begin downloading, and I get an error message that the download is corrupt.
I get it on BOTH my office and home Macs...sometimes behind a firewall, sometimes not....sometimes Wifi sometimes not.
What the hell is going on??? I had a client presentation and couldn't get Photoshop to work...I used a $1.99 photo retouching ap, that SERIOUSLY got me thinking about all the money I've spend with Adobe over the years.

Sallujan I am sorry you are facing a frustrating experience downloading your updates. Are you receiving any specific errors? You can find more details on how to resolve download errors at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Exchange 2013 /m:recoverserver constantly failing due to MSExchangeSubmission.exe

Hi all,
I am trying to recover my lab Exchange 2013 server after removing a component of IIS messed all IIS functions, including all virtual directories.
The server is running on Hyper-V so I have removed and rebuilt the OS disk whilst the Exchange data resides on a separate disk. I've reset the computer account in AD and then run the command:
setup /m:recoverserver /targetdir:"d:\Program Files\Microsoft Exchange\v15" /DoNotStartTransport /IAcceptExchangeServerLicenseTerms
I have now done this a number of times and on each occasion it fails when attempting to start the Microsoft Exchange Transport Submission service. The error in the event log is as follows:
Log Name:      Application
Source:        Application Error
Date:          30/03/2013 20:18:53
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      HV-E2K13
Description:
Faulting application name: MSExchangeSubmission.exe, version: 15.0.516.29, time stamp: 0x506956b8
Faulting module name: Microsoft.Exchange.Net.ni.dll, version: 15.0.516.27, time stamp: 0x5064072e
Exception code: 0xc00000fd
Fault offset: 0x0000000000639d07
Faulting process id: 0x1cc8
Faulting application start time: 0x01ce2d83cbb5568e
Faulting application path: D:\Program Files\Microsoft Exchange\v15\Bin\MSExchangeSubmission.exe
Faulting module path: C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\6f9b1d97c1f0dcb9b1006260c405a5da\Microsoft.Exchange.Net.ni.dll
Report Id: 0a1e3a42-9977-11e2-93f1-00155d0a4b05
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-03-30T20:18:53.000000000Z" />
    <EventRecordID>112812</EventRecordID>
    <Channel>Application</Channel>
    <Computer>HV-E2K13</Computer>
    <Security />
</System>
<EventData>
    <Data>MSExchangeSubmission.exe</Data>
    <Data>15.0.516.29</Data>
    <Data>506956b8</Data>
    <Data>Microsoft.Exchange.Net.ni.dll</Data>
    <Data>15.0.516.27</Data>
    <Data>5064072e</Data>
    <Data>c00000fd</Data>
    <Data>0000000000639d07</Data>
    <Data>1cc8</Data>
    <Data>01ce2d83cbb5568e</Data>
    <Data>D:\Program Files\Microsoft Exchange\v15\Bin\MSExchangeSubmission.exe</Data>
    <Data>C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\6f9b1d97c1f0dcb9b1006260c405a5da\Microsoft.Exchange.Net.ni.dll</Data>
    <Data>0a1e3a42-9977-11e2-93f1-00155d0a4b05</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
Any thoughts?
Paul

Hi,
Im dealing with the same errors when i'm trying to restore our productive mailbox from a disaster.
I've tried everything listed here but last Milind Naphade commentary.
I'm in that right now, i ll tell if it's working soon.
Ty!
Hi Again. It Failed to start MSExchangeSubmission.exe
Here is the event on eventvwr (Some details on spanish wich is the language of my server)
Nombre de la aplicación con errores: MSExchangeSubmission.exe, versión: 15.0.516.29, marca de tiempo: 0x506956b8
Nombre del módulo con errores: Microsoft.Exchange.Net.ni.dll, versión: 15.0.516.27, marca de tiempo: 0x5064072e
Código de excepción: 0xc00000fd
Desplazamiento de errores: 0x000000000062f697
Identificador del proceso con errores: 0x7d0
Hora de inicio de la aplicación con errores: 0x01cfac0a0bb16a68
Ruta de acceso de la aplicación con errores: C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeSubmission.exe
Ruta de acceso del módulo con errores: C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.E91f4adf5#\b028905d8fd3faa99c9801b69b1500da\Microsoft.Exchange.Net.ni.dll
Identificador del informe: 4a9638fc-17fd-11e4-9404-000c29f101d8
Nombre completo del paquete con errores:
Identificador de aplicación relativa del paquete con errores:
ExchangeSetup.log ends with:
[07/30/2014 15:19:10.0220] [1] The following 1 error(s) occurred during task execution:
[07/30/2014 15:19:10.0220] [1] 0. ErrorRecord: El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.
[07/30/2014 15:19:10.0220] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceDidNotReachStatusException: El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.
en Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
en Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.WaitForServiceStatus(ServiceController serviceController, ServiceControllerStatus status, Unlimited`1 maximumWaitTime, Boolean ignoreFailures, Boolean sendWatsonReportForHungService)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.StartService(ServiceController serviceController, Boolean ignoreServiceStartTimeout, Boolean failIfServiceNotInstalled, Unlimited`1 maximumWaitTime, String[] serviceParameters)
en Microsoft.Exchange.Management.Tasks.ManageSetupService.StartService(String serviceName, Boolean ignoreServiceStartTimeout, Boolean failIfServiceNotInstalled, Unlimited`1 maximumWaitTime, String[] serviceParameters)
en Microsoft.Exchange.Management.Tasks.StartSetupService.InternalProcessRecord()
en Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/30/2014 15:19:10.0236] [1] [ERROR] The following error was generated when "$error.Clear();
start-SetupService -ServiceName MSExchangeSubmission
" was run: "El servicio 'MSExchangeSubmission' no puede alcanzar el estado 'Running' en este servidor.".
[07/30/2014 15:19:10.0236] [1] [ERROR] Service 'MSExchangeSubmission' failed to reach status 'Running' on this server.
[07/30/2014 15:19:10.0236] [1] [ERROR-REFERENCE] Id=MailboxServiceControlLast___23a36fed7b6947e0906f388b5a90135c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[07/30/2014 15:19:10.0251] [1] Setup is stopping now because of one or more critical errors.
[07/30/2014 15:19:10.0251] [1] Finished executing component tasks.
[07/30/2014 15:19:10.0267] [1] Ending processing DisasterRecovery-MailboxRole
[07/30/2014 15:19:10.0282] [0] No se completó la operación de instalación de Exchange Server. Puede encontrar más detalles en ExchangeSetup.log ubicado en la <SystemDrive>: carpeta \ExchangeSetupLogs.
[07/30/2014 15:19:10.0282] [0] End of Setup
[07/30/2014 15:19:10.0282] [0] **********************************************
Any suggestion please??? idk what else can i do!

Firefox update is constantly failing and is stuck in a loop. I don't know how to bypass this. Help

When I start firefox, it automatically tries to install an update. This fails and it repeats, getting stuck in a loop which I can not get out of. Consequently, I am unable to open firefox and use the internet on this program. I have clicked ok, closed the dialogue box and ended the program using the task manager. None of these have worked. I prefer using firefox to other browsers but have had to return to internet explorer for the time being.
Do I need to uninstall and reinstall firefox or is there another option?

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
Do a clean reinstall:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Hard Drives Constantly Failing

I just received a new hard drive Monday through an AASP in Puebla, Mexico, due to a hard drive failure within two months of purchasing my laptop. Sadly, I'm now reinstalling OSX due to what appears to be a very similiar hard drive failure. Luckily, my computer is still under warranty.
I'm not a computer whiz so here are some details of the first hard drive's failure (the current hard drive is failing in much the same manner).
1) The computer became increasingly slow, eventually freezing, forcing me to force restart.
2) Should I be lucky enough that the Macbook would reboot, it would be even slower than before, and freezing sooner than before. This would forece me to reboot, leading to step 1 or 3.
3) The hard drive would no longer boot, forcing me to try suck fixes as...
-repairing from the disk utility, which did not work
-trying fsck which also did not work
4) Reinstalling OSX, going back to step 2, and repeating until the hard drive was no longer recognized.
It appears that either
A) I'm doing something horribly wrong which is destroying my hard drives.
B) There is some other hardware problem that is slowly killing my hard drives, or..
C) My AASP didn't actually replace my hard drive.
What do I do, and would it be possible to get a new Macbook under my warranty?
Any help or advice would be greatly appreciated!

Apple doesn't publish a policy on replacements, but anecdotally, it seems that if Apple has tried three or four times or more to repair the same problem and not met with success, they'll consider replacing the machine.
Sure, but it's a little different if an AASP's been doing the repairs. Also because it's been the exact same repair over and over, I doubt they'd be willing to replace the entire unit without trying something else first.
Hard drives fail — they just do. One may run like a top for ten years, while the one that came off the assembly line right behind it could fail on Day 2. Odds are that you've simply been unlucky.
Also, yeah, HDDs fail, but it doesn't make sense to have 3 HDDs fail in quick succession.
Seems like, which came first...the chicken or the egg...except it's which came first, the freezing or the directory corruption.
You could very well have a failed/failing hard drive flex cable (connects the drive to the logic board) or a failed/failing controller on the logic board. I'd bet flex cable myself, but it's hard to say without working with the machine firsthand. The bad cable causes the computer to freeze, which causes you to force it to shut off, which means files don't get put away properly. This leads to data corruption, partition map corruption, volume header corruption, all kinds of stuff that makes it impossible to boot. It snowballs from there each time you try to use it.
I'd agree it's possible to coincidentally have more than one failed drive in a row, absolutely. But for them to all have the exact same problem and the exact same progression to me indicates a bigger problem.
Message was edited by: k.panic

Importing constantly fails after 10.1 update

Hello All,
I am experiencing a major problem after upgrading to 10.1
every time I try to import media "Canon VIXIA HF20" a supported camera it fails and tells me it is referencing the media on the camera.
If I kick of the import again it sometimes works, or I have to manually copy the media off of the camera then import it from a file which seems to work.
I have never had this issue before and this is causing me a lot of grief!
Is there a fix for this?? is there anything I can do??
any help will be greatly appreciated.
Paul...

I realize that everything was fine until… But I'm not aware that 10.1 update has broken the import function in general or for any specific format or camera model. More to the point, a Web search didn't didn't turn up those reports. Nor should this format require any special plug-ins that might need updating to work with 101.
So when you ask for any fixes, I would still look at the possibility of a suspect clip. Try shooting some test footage and see whether that imports. If you still have problems, take the camera's internal drive out of the equation and try a card.
Good luck.
Russ

Windows Updates constantly failing and reverting after SCCM 2012 R2 pushes out updates

Hi folks,
I wonder could anyone help me with a strange problem I am having!
We use SCCM 2012 R2 and I am trying to roll out updates to a Windows 2008 R2 Standard 64 bit server.
When I deploy the updates to the server they get to the server and install but during the reboot it says Windows Modules Installer for a while then shows the failure configuring Windows Updates, reverting changes screen.
I’ve tried the suggestions of disabling 'Windows Management Instrumentation' and 'Windows Modules Installer' and renaming the repository folder but still no joy.
If I use Windows Update to install the updates the updates do go on but then when I add it to the collection in SCCM to push out the patches it sees the server as if the updates aren’t installed and begins doing the installs.
After the patches installs using SCCM and when the server is rebooted it goes back into the loop of saying Windows Modules Installer and reverts the updates and strips out the patches again.
I was hoping that when the Windows Updates were installed via Windows Update and once I put the server into the collection to push out the updates to the server it would have shown that the updates are already installed on the server and show that server
as being compliant in SCCM but unfortunately that isn’t happening.
It sights a couple of errors in the Setup event logs on the offending server: -
For multiple patches - Package KBXXXXXXX failed to be changed to the Installed state. Status: 0x80070643
For multiple patches - Initiating changes for package KBXXXXXXX. Current state is Invalid Resolved. Target state is Installed. Client id: WindowsUpdateAgent.
After doing some research,
0x80070643 refers to a .Net Framework issue so I’ve ran a .Net Repair tool but that didn’t work either so I’m running out of ideas so any help would be greatly appreciated on how I can get this sever updated using SCCM and showing as compliant.
Thanks,
Bonemister

Hi Torsten,
Thanks for your reply!
I was afraid you were going to say that as it just doesn't make sense that when I install the update using Windows Update via the Ire-nternet and when the install and re-scan no updates are required. It is only when I ask SCCM to check for patches
that it sees updates are missing and installed the updates before the OS reverts when.
Is there a way in SCCM to remove the record of what patches have been installed onto a particular server? I tried deleted the server out of SCCM then applying the Windows Updates via the web then added the server back into SCCM and see did it pick
up the newly installed updates on the server.
The thing is I don't think that WindowsUpdate.log will show any failures as Windows update is showing as no more updates required. It is just when SCCM installs that patches that the problem happens so that is what is leading me to think it is an SCCM
problem.
My main goal is to get the updates into the server and for it so show as complient!
I'll check back through the even logs again. Are they any SCCM logs that show patches failing to install and why?
Thanks again,
Bonemister

Why does a motion control unit constantly fail during config

Why does a drive fail during config.... I am trying to control a machine using faulhaber motors (5 of them) with faulhaber controls, one drive fails during config (fatally fails) and it is not wired any different to any of the others... even with only 24v supply, it dies... Blue screen and restart of pc... the others all worked perfectly, with no fault. The process we are using for the troublesome drive is exactly the same... We are stuck, can anyone please help?

thank you, but faulhaber are all on holiday, and I am really struggling..... tis only one unit and only when it is positioned in one place... checked all electrical connections, no shorts, no loose wires, even fails when just power and serial connected.... so not even motor problem.....

ISP constantly Failing

Similar Messages

Maybe you are looking for