Issue connecting to VPN using hotspot

I want to connect multiple devices to the Hot Spot and use the VPN connection to connect back to my office. How do we make that work?

I connect to the VPN and can remote desktop or use my Citrix Client using the iPhone Apps with no issues but need to also add two laptops using the VPN connection through the hotspot. I have tried the PPTP and the L2TP connections.

Similar Messages

User having trouble connecting to VPN using mobile broadband card

I've got a user with a laptop running Windows 7 who is trying to use an AT&T mobile broadband card to connect to a VPN using the Cisco IPSec VPN client. The card is the Sierra Wireless Momentum 4G. The VPN connection established fine, but no traffic gets passed after that. Other users can connect to the VPN fine (not using mobile broadband, though). Wired and wireless connections from this laptop are able to get to the VPN fine. It's just over the mobile broadband service that this happens. Are there any workarounds for this issue?

Hi and Welcome to the Community!
To use the proprietary BB services (including Push email capability, native browser, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Connecting over VPN using Toad

Hello,
We have started experience problems connecting to our 9i and 10g databases when using Toad over a VPN connection. Although a connection is actually made nothing is returned to the Toad client and it justs hangs. This problem only occurs over a VPN. When connected to the LAN there is no problem. Also it is possible to connect over the VPN using SQL Developer. This has only recently started happening. In the past we have been able to connect over the VPN without a problem. Sounds like a Toad problem? Yes! I was wondering if anyone else had experienced this and new of a resolution.
Thanks James

Hi ,
The OP is able to connect through SQL Developer using VPN so no issues with VPN,The OP is facing problem when connecting using TOAD so:
1)Try to disconnect the TOAD and than try if that doesn't work can you please type the error message you are getting while connecting to the TOAD using VPN.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Issue connecting to WRVS4400N using QuickVPN Client

Hello,
I am getting the attached error connecting to the WRVS4400N using the QuickVPN. I get the error from both Windows XP and Windows 7 64-bit. It has worked fine to a long time and then got the error when I tried to connect off of my hotspot and then tried again from home as normal and am always getting the error. Another user started getting the error a few weeks after me and she is the one using XP.
I have tried to reinstall, running as different compatibility O/S, running as admin, different userid/password, using remote DNS setting, rebooting router twice and many other things. I can connect to the router via remote management with no issues and it seems to be working okay.
Would appreciate a resolution. This is causing issues for remote access that is very much needed.
Thank You!!

865954 wrote:
i have set ORACLE_SID=ORCL even then we need to mention the SID as
sqlplus system/manager@ORCLno, we don't need to include *@ORCL* if we want to connect to ORCL, but we need to add sid name if we want to connect to different sid.
you can connect as sysdba by
sqlplus sys/manager@orcl as sysdba

Software Defect, Connecting to VPN using Freedome

Hi,I've purchase A freedome, and i've tried to use it to protect my data and business exchange, but the problem um unable to connect to VPN servers, A VPN is blocked on the network I work on, but what surprise me there is another VPN application able to connect through firewall such as PSiphone. while Freedome icon still spinning without connect.

Hello Samer,
Sorry for not getting back to you earlier.
Could you give us more information on your set up? What are the machine/ device involved?
Which type of network are you on? What kind of firewall is in place?
Do you get any error? Did you try to connect to different location?

Issues connecting remote server using PSSESSION

Hi All,
I need to execute powershell on servers behind firewall, i set server to use 8530 port (which we opened for patching) so i can reach DMZ server from Non-DMZ via 8530.
Below commands Configured on DMZ Server
Set-Item WSMan:\localhost\Service\EnableCompatibilityHttpListener -Value true
Set-Item wsman:\localhost\listener\listener*\port –value 8530
set-item wsman:\localhost\Client\TrustedHosts -value (non-dmz desktop from where i plan to run Powershell script)
While executing the below command
New-PSSession -ComputerName " IP" -Port 8530 -credential $cred
i am getting following error
Connecting to remote server failed with the following error message : The WinRM client cannot process th
e request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS
or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure Trus
tedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set T
rustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting He
lp topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportExc
eption
+ FullyQualifiedErrorId : PSSessionOpenFailed
If i execute with NAME
Invoke-Command -ComputerName HAMWINWIZP015 -ScriptBlock {Get-Process} -Credential $cred
Connecting to remote server failed with the following error message : WinRM cannot process the request.
The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us
e HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information,
see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
Could you suggest what would be the issue & if possible please help me to use that DMZ Server as proxy server as i am willing to run powershell on few DMZ Server via the one server.
Ganapathy

Hi Ganapathy,
I am trying to involve someone familiar with this topic to further look at this issue.
There might be some time delay. Appreciate your patience.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support

Issue connecting 5.0Ghz using Z3

Hi Sony Support and Z3 Users,
I need some help and clarification. I just got a brand new Dual-band modem that has 2.4Hz and 5Hz wireless connection.
I was able to connect to 2.4GHz for Z Ultra, Z3 Tablet Compact and Z3 but my Z3 is the only one cannot connect to 5GHz. Can I check what happened? Does anyone having the same problem like me with Z3. Is it firmware problem or hardware issue? My Z Ultra and Z3 Table Compact didn't have any problem with 5GHz so may I know what caused my Z3 refused to accept the 5GHz. Hope to receive your inputs.
Thanks

Hi,
I have the same problem with my Z3 Dual (D6633).
I have a Netgear WNDR3700 Dual Band Router (award winning).
Beside me I have an Acer Laptop with built-in Dualband connected to 5GHz and also a stationary PC with USB dongle dualband connected to 5 GHz. No difference moving the Z3 close to the router.
I have seperate SSID for 2,4 and 5 GHZ.
Booting into safe mode shows that 5GHz now available, saved and using WPA - but it won't connect. While in safe mode i tried connecting to 2,4 GHz with no problem - but then 5GHZ now shows "Not within reach" - as it does in Normal boot mode.
Apparently when I started up the Z3 for the very first time (2 month ago) I was able to connect to 5Ghz as I have filled in Password and saved this connection.
If this problem appeared before or after the newly firmware update - I cannot tell. I just saw this tread and checked the phone - just to dicover that I was not connected to 5 Ghz as I thougt I was.
Regards
Kim

IPad connects to free WiFi Hotspots, but NOT on my home WiFi network

First, let me say that I have my iMac and a PC laptop working on my home WiFi network with no problems. My iPad connected to my home WiFi network for several months until about a week ago or so, somewhere around the time that I updated my iPad to OS 4.3.3.
In the General settings section I have reset the NETWORK setting several times to no avail. I changed my network SSID twice, and changed my WAP2 password 3 times. My iMac and PC laptop worked like a charm for each change. But, like I said, my iPad has no issues connecting to free WiFi hotspots like at coffee shops, but "cannot join my Clearwire WiFi network" at home.
My guess is that I have an OS issue, but if anybody knows anything better, please let me know.
Thank you.

I think the OS issue is with the password because free WiFi hotspots don't require passwords. So, all of my RF circuits are fine. My password is correct because when I changed it in the Clearwire WiMax modem\router, I was able to connect with the new password on my iMac and PC laptop with no problems.
I have a 3 month old Clearwire 4G modem\router. My iPad worked great from the day I installed it. It stopped working around the time that I updated my iPad OS to 4.3.3.
I am hoping that there is an OS fix because I had Clearwire on the phone for over an hour and we re-booted the modem\router several times and reset it to its default values. Again, I have no problems connecting with my iMac or PC laptop. They work like a charm, just like my iPad used to.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

Problems connecting to SVN using HTTPS

I am having an issue connecting to SVN using HTTPS. I am using DreamWeaver 5.5.
We are being required to access the SVN Repository using LDAP. Prior to this I was able to get to the SVN Repository just fine using the SVN connection.
With the HTTPS connection I am getting the following error in the log:
SVN: #175002, OPTIONS of 'https://ipAddress/repos/...': SSL handshake failed: SSL error code -1/1/336032856 (https://IPAddress)
Another developer who is on a MAC can get to the Repository using DreamWeaver and HTTPS just fine. I have validated that all of the settings in DreamWeaver was the same. The other developer using Windows is having the same issue that I am having.
I can get to the repository through Tortoise using HTTPS.
Any recommendations?

FYI. This issue has been solved. After we connected using the server name instead of the IP address it was able to work. So, if anyone else has this issue maybe this will help.
Thanks.

IPhone Hotspot connect to VPN Issue

Hello everyone,
we got some issues using the hotspot feature in combination with VPN over PPTP.
It alaways fails with error: 800 in windows. Browsing the internet works fine.
Tried it with iPhone 5 and 4S. iOS Version 6.1.3 and 7 Beta 3.
Same issue on each Version.
First I thought its maybe a carrier issue but if I use the hotspot feature on an old blackberry (same sim) the vpn works fine.
Does anyone got this issue also or know how to fix it?
Regards
David

Connect it to iTunes.

VPN connection to WRVS4400N using a Samsung Galaxy tablet

I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco. I have no issues at the moment using Quick VPN from my laptop.
When using the Any Connect software I receive the following messages:
Security warning: untrusted certificate
AnyConnect cannot verify the identity of <IP address>. Would you like to continue anyway?
- Certificate does not match the server name.
- Certificate is from an untrusted source.
- Certificate is not identified for this purpose
[Accept] [Details] [Cancel]
If I select accept, the following error is received:
"Error: Connection attempt has failed due to server communication errors. Please retry the connection".
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.
Any assistance would be greatly appreciated. Thanks.

Hi Blair,
The WRVS4400N only works with the QVPN software. The only small business router at this current time works with the Cisco any connect vpn is the SA500 series routers.
I hope this helps.....
Thanks,
Tori Woods
Cisco Support Engineer
CCNA, CCNA Wireless

I have 3 questions,Audio/Video Remote Control HID driver windows 8 fails to install code 32, trying to use usb tether connection rather then using WiFi to connect Laptop and iPhone. can only connect using wifi. Last quest. about the hotspot bar.

In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
biut I am not sure how to properly do this.
Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not trainsmit my ssid for others to see even though I do use a password.
Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
biut I am not sure how to properly do this.
Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not trainsmit my ssid for others to see even though I do use a password.
Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

Kerberos issue when connecting via VPN

Hi,
I am have some issues when connecting via VPN.
The following kdc log is issued when I log via VPN
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): DISPATCH: repeated (retransmitted?) request from 192.168.2.5, resending previous response
May 02 12:12:21 ATHENA.MYDOMAIN.LAN krb5kdc[163](info): TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.2.5: UNKNOWN_SERVER: authtime 1146535939, [email protected] for ldap/[email protected], Server not found in Kerberos database
I also have a system log May 2 12:12:21 ATHENA DirectoryService[41]: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This logs only happen while logging through VPN.
Any idea?
Cheers
Ben

Hi,
When using your VPN are yo using Terminal LIcense or Remote Desktop Connection?
Please do the following to save form settings:
1. Only 1 module should be open when using form settings.
Close other modules that doesn't need.
2. Close the module after changed. To make sure the settings are saved.
3. Always close all the module before exiting SBO program, use the click FIle and Exit habit.
4. Terminal Licensing should be use when connecting remotely.
Thanks.
Clint

Issue connecting to VPN using hotspot

Similar Messages

Maybe you are looking for