Issue in Corporate Dashboard

HI all!
I have "Corporate Dashboard", two frames(Navigation list and Viewer)
If I click on a report in Navigation list, it appears in Viewer.
BUT! In the report no button "Save to Excel"(Document/Save to my computer as..) and do not display the Reports tab. Only that the image.
http://dl.dropbox.com/u/9343091/Dashboard%20viewer.PNG

I use the user Administrator with Full Controll.
1. If the Navigation list located a report that
http://dl.dropbox.com/u/9343091/dashboard1.PNG
2. if there is a folder with a report:
http://dl.dropbox.com/u/9343091/dashboard2_1.PNG
then, when you click on the report in Viever, the report opens with key "Document"
http://dl.dropbox.com/u/9343091/dashboard2_2.PNG

Similar Messages

  • Intermittent Blank Screen - Multi-Tab Corporate Dashboard

    Hi All,
    We are a facing an intermittent blank screen issue with our corporate dashboard. Details are as follows: -
    Environment:
    BO XI 3.1 SP2 FP2 (Two servers on production)
    Xcelsius 2008
    Live Office
    QaaWS
    Issue:
    Sometimes we only see a blank screen (Not even the initializing screen) when a corporate dashboard is opened from Infoview.
    This is a multitab dashboard and is built using Live Office and QaaWS connections.
    Initially the issue was occuring only on one server and sometime later it started occuring with the second server as well.
    We restrated the services on both the servers and the issue disappeared. (Maybe it was due to cache getting cleared up, though not sure on this)
    What we need:
    1. Are there any known issues for this kind of issue?
    2. What are the possible reasons for intermittent blank screen?
    I have searched through the forums and BOB forums and have found about the visibility issue. In our case we do not face any issues with that.
    Regards,
    Abhishekh

    Hi Amit!
    Running the trace is fine, but the issue occured only once and that to when we restarted the corresponding servers the issue vanished.
    Why I feel that this is not something related to flash is because, first the issue appeared on the first prod box (merantime the second prod box was showing the output correctly). Later on (maybe in 5-10 mins) even the second server started having issues.
    So far the issue has appeared only once. However the business would like to understand the possible reasons and would like to avoid similar situations in the future.
    We do not have access to either the Firefox or Chrome. Though we have tried with multiple versions of IE. The IE version on which the issue appeared was IE 6/7.
    I think, I will close this thread for now. If the issue resurfaces again, we can look into it further.
    Hope to hear back from you soon!
    Regards,
    Abhishekh Jain
    Edited by: Abhishekh Jain on Oct 18, 2011 9:17 AM

  • URL to a BO XI 3.1 Infoview Corporate Dashboard

    I'm looking for the syntax used in BO XI 3.1 to create a URL which will open Infoview displaying a specific corporate dashboard.
    Thanks,
    Bob

    Hi Robert,
    Following information might be helpful for  resolving the issue.
    Using the link like below can access corporate dashboard reports saved in Infoview.
    http://MachineName:8080/businessobjects/enterprise12.0/desktoplaunch/jsp/performanceManagementHome.jsp?navPos=1,0,0&linkType=CORP
    Parameters:
    1.     navPos identifies which dashboard, which menu and which submenu to open through this link. Value of this parameter will be a serial of numer (x1,x2,x3), like 1,0,0
    x1 points to which dashboard this link will open. Since parameter such as iDocID can not be used in this link. 0 will point to the corporate dashboard that is created first. In a system installed with dashboard examples, 0 will point to the dashboard "Total Electronics"
    X2 identifies which menu under x1 will be open. For example, x2=0 will open the first menu under dashboard x1.
    x3 identifies which submenu under x2 will be opened.
    2. linkType identifies the type of dashboard which this link is going to open.
    Examples:
    1.     http://MyMachine:8080/businessobjects/enterprise12.0/desktoplaunch/jsp/performanceManagementHome.jsp?navPos=2,1,0&linkType=CORP
    2.     Jsp Content example when passing BOE token through this link:
    String userName = "User"; //User Name of BOE
    String password = "123456"; //Password for the user
    String CMSName = "MyMachine"; //Name of BOE Server
    String enterpriseToken = "";
    String reportURL = ".http://MyMachine:8080/businessobjects/enterprise12.0/desktoplaunch/jsp/performanceManagementHome.jsp?token="+ enterpriseToken+"&navPos=1,1,0&linkType=CORP";
    Regards,
    Sarbhjeet Kaur

  • Corporate Dashboards Analytic toolbox fails

    Hello, I'm having trouble with the analytic toolbox. When I create a Corporate Dashboard and try to add a corporate analytic from the analytic toolbox, the tree doesn't display all the analytics, it only displays some analytics in some folders, and some folders appear to be empty. I have BOE XI 3.1 with sp4.
    Anyone has or had the same problem?

    Hi,
    Tried that already, it does not provide options that i have while I create my analytic.
    I mean the navigation options or the options to edit the query ,change the metric etc.
    It takes me to a screen which asks me to select the document to display!

  • How to show corporate dashboard in SAP Portal?

    HI,
    we have requirement to show BOBJ info view corporate dahsboard (three tabs) via SAP netveawer portal.
    I know we can integrate crystal report into SAP portal but how to integrate whole corporate dashboard from info view?
    thanks

    Thanks,
    I tried it with the following based on documentation I found:
    http://<server>:8080/businessobjects/enterprise11/desktoplaunch/opendoc/openDocument.jsp?iDocID=2776 (<server> being our dev server and 2776 being the id I found for the dashboard from CMC)
    however - I get an error:
    description The requested resource (/businessobjects/enterprise11/desktoplaunch/opendoc/openDocument.jsp) is not available.
    any idea?

  • Issues migrating Xcelsius Dashboards from Dev to QA in BO 4.0

    We are currently using BO 4.0 SP2 for enterprise landscape  and Crystal Dashboard 4.0SP2 for dashboard design. We have Webi Reports created on top of BEx queries and BI Web Services are created on top of WEBI Report blocks used as the data sources for Xcelsius dashboards. All the dashboards work fine in Development environment. Now the problem is when we migrate the dashboards to QA, dashboards doesnt work anymore as the Web Services based on Webi Report blocks have the  BOBJ Dev server name hard coded in the Web Services URL and still shows the same in QA. I can change the web services url to point to QA in XCelisus, however can't edit the web service in QA to change it to point to Dev. Has anyone experiences this issue?
    Thanks
    Raj Jetti

    Hi Sankar,
    Proc :1
    Try to export it through Import Wizard,
    Proc 2:
    Please upgrade patch to latest version of patch .. we had similar issue in boxi 3.1 sp5 we have upgraded to sp6 then we were able to sucesfully export business views
    Proc 3:
    Export XML  from DEv and import it into VAl in Business view manager.
    Let us know...

  • Issue Running a Dashboard on iPad using Oracle BI Mobile App 11.1.1.5

    Hi All,
    I have an Oracle BI dashboard (11g) which I'm trying to access through an iPad. I have Oracle Business Intelligence Mobile App (version 11.1.1.5) installed on the iPad and the version of the Oracle BI EE Server is 11.1.1.6.0
    Functionality of the Dashboard
    =============================
    The dashboard consists of 15 tabs. The first tab is an Overview tab from where a user is required to select the value for a scenario. Once the user selects a particular scenario and clicks on Apply button the charts on the Overview tab, as well as the data for all other tabs gets generated and the user can select different tabs and view their data.
    Results Obtained (till now)
    ================
    The above Dashboard is working perfectly fine when tested on
    i. Internet Explorer
    ii. Apple iPhone & iPad - Safari Browser
    ii iPhone - Oracle Business Intelligence Mobile App
    Problem Running the Dashboard on iPad ( using Oracle Business Intelligence Mobile App)
    ============================================================
    When I open the Dashobard, the initial Overview tab appears. As soon as I select a Scenario and click on Apply button, the Overview tab gets generated perfectly fine but the drop down list for selecting the other related reports (tabs) stops appearing.
    The Refresh, Properties, Mobile/ Original Layout and Favorites icon on iPad screen all stop functioning.
    However, if I do not select a Scenario in the Overview tab and simply click on the dropdown I'm able to view and select from the list of other available reports (tabs) in the Dashboard. The other tabs open up but do not display any components which completely or partially depend on the scenario chosen on the Overview page. Only the components which are independent of Scenario selection appear on the other tabs.
    Selecting the Scenario in the Overview tab and applying it is a mandate for getting results on other reports (tabs) but once this is done then the complete navigation stops as explained above.
    The same Dashboard is however working perfectly fine with the same App on iPhone.
    If anyone has any idea about how to resolve this issue, Please help.
    Thanks,
    Jyoti

    There are a number of issues w the Mobile app and Ipad...have to thoroughly reviewed this metalink note:
    Master Note For Oracle Business Intelligence Mobile Applications (iPhone/iPad) Issues in OBIEE [ID 1293391.1]
    If helpful, pls mark correct or helpful

  • Issue with renaming Dashboard

    Hi Experts,
    i have one strange issue...can anyone help me pls
    i have 4 dashboards.. mydashboard, test1, test2,test3..
    the test1 dashboard contains 10 reports and that reports contains navigation reports also..
    when i renamed the 'test1' dashboard to some other name.. the reports are not displaying...
    there i found one check box ' preserve references old name item ' i checked it. and run the dashboard its working fine the reports are coming but my OLD 'test1' dashboard is still appearing..when i try to delete it its not working...
    kinldy help me...

    Hi,
    I hope you already have back up of catalog. Else, make a back up of catalog.
    Now, in order to change the Dashboard name you use following 2 methods:
    METHOD1: CHANGE DASHBOARD NAME USING ANSWERS ADMIN TAB
    METHOD2: USING CATALOG MANAGER.
    Method2 is more convienent and easy way:
    1. Login into BI Catalog manager. open catalog in offline mode.
    2. Expand, The Tree -> Expand the Shared -> (Now you see you different folders say my dashboard TEST1)-> expand the '_Portal' (Folder)
    3. Make sure it is navigated to the proper Dashboard area '/shared/test1/_portal'
    4. Now, Right click on test1 on the right side window and select 'SMART RENAME'
    5. Rename it to desired name Say 'My New Dashboard'
    6. Go to file -> close catalog.
    7. Restart the services and check the dashboard name.
    Now, you dont find any problem or errors.
    Whereas, in Method1
    1. Login into Presentation services of Bi using 'Administrator'. Go to settings.
    2. Open -> settings -> administrator -> manage presentation catalog.
    3. Check mark 'show hidden items' -> now we are able to navigate to shared folders, group folder under which we created the dashboard.
    4. Click you Shared folder - select '_portal' Folder (this will appear only when we check mark hidden items in the above step)
    5. Now, click on Rename option and change the name.
    6. Click on 'Update'
    7. Click on Finished, and close the window.
    AS per my understanding you have renamed the name but it was not reflected in all the reports thats the reason it preserve references to old name.
    Do, follow the first method. And, try to rename the Dashboard Test2 (alwayz navigate to internal folder _portal and then rename).
    Please, Award Points if this resolves your issue and Close the thread to help others :)   :)
    Edited by: 831909 on Jul 12, 2012 7:38 AM

  • Deployment Issue with PPS dashboard

    I am trying to deploy a dashboard and face the below issue:
    "An error has occurred attempting to contact the specified sharepoint site. Please check your connection and settings and try"
    Steps followed:
    1. Create a new data source
    2. Create a sample report tag report to a dashboard
    3. Deploy the dashboard.
    Any help on this?
    Thanks
    Manoj

    Hi Manoj,
    According to your description, my understading is that you got an error when you deployed PPS for SharePoint 2010.
    In general, this issue is caused by PerformancePoint on a Claims-enabled site. Dashboard Designer (a Click-Once application) is not Claims-aware. This can be worked around by extending the web application  to enable access via Classic-mode authentication. 
    More information, please refer to the link:
    http://blogs.msdn.com/b/mcsukbi/archive/2011/11/26/bi-service-applications-in-sharepoint-2010-authentication-classic-vs-claims-and-identity-delegation-kerberos-part-5.aspx
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ca4b483b-efaa-4b52-aa29-eab385b4d949/dashboard-designer-sharepoint-2010-an-error-has-occured-attempting-to-contact-the-specified?forum=sharepointcustomizationprevious
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/1cea5171-b1ed-4ee9-8f98-f0f84054944c/dashboard-designer-an-error-has-occured-attempting-to-conact?forum=sharepointcustomizationprevious
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3987da03-eb26-4a41-a644-a3bd3e62324c/performancepoint-services-fba-forms-based-authentication?forum=sharepointgeneralprevious
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Installation issues in corporate environment

    Hi all.
    I´m a system administrator in a large enterprise with aprox. 12.000 windows clients. Amongst others, I´m responable for the distribution of software updates (Operating System, MS Office and the Adobe products Acrobat and Flash). Since yesterday we have a massive problem with the latest security update for flash player activeX. As usual we pull all available adobe updates via SCUP (System Center Updates Publisher) and publish them in SCCM (System Center Configuration Manager). After that, I create an update group in SCCM, create a deployment package and deploy the package.
    Unfortunately the update fails on about 50 - 60 % of the windows clients. The situation is very strange on those machines where the update fails, because the software center tells that the package is installed and in "programs and features" the new 13.0.0.182 flash player is listed. But the Flash control panel applet tells that there is no activeX version installed
    There is also no Flash64_13_0_0_182.ocx in C:\Windows\System32\Macromed\Flash (and no Flash32_13_0_0_182.ocx in C:\Windows\SysWOW64\Macromed\Flash) and no other flash ocx at all.
    We also distribute the new flash player plugin update in the same deployment package. It installs flawlessly.
    Because of this issue I have stopped the distribution of the activeX update until I have a solution. In my opinion it is a bug in the installation package.
    Our clients use MS Windows 7 64-bit EN SP1 with MS SCCM 2012 installed

    Tom Etterler wrote:
    You cannot just reinstall version 12, because the OS thinks the flashplayer is installed successfully, although it isn´t. You have to completely wipe all current versions of the flashplayer. Just download the Flash Player Uninstaller here -> http://download.macromedia.com/get/flashplayer/current/support/uninstall_flash_player.exe
    WARNING! This uninstalls both the plugin and the activeX FlashPlayer. After that, download and install both the plugin and the activeX FlashPlayer 13.
    As a side note, the uninstaller does remove both versions by default, but if for some reason you only want to target one of them you can do so.  You just append "activex" or "plugin" at the end of the command line.  Ex:  uninstall_flash_player.exe -uninstall activex will remove the activex component while leaving the plugin untouched.
    I'm still having the corrupted install problem as of the .214 release.  Hoping that Adobe will address this soon.

  • Bizarre & Random Dashboards Display Issues/Errors

    Hello,
    I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
    Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart.  Has anyone experienced this or have any idea what could cause this? It is very frustrating...
    Thanks for looking,
    Gary
    Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
    Green line missing dot on last end point
    In this example there are no dots on the yellow line or green line
    In this example the blue line has turned into massive columns extending across the charts

    This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

  • Issue with Parent child dashboards using SWFLoader component

    Hello Gurus,
    I am using Parent-child dashboards approach in our project.
    I have multiple child files embedded in Parent dashboard using the SWFLoader (directly passing the URL as SWFLoader value) to load child dashboards. All the child, parent swf's are saved in the same intranet folders.
    When I open the parent SWF, everything loads fine in the intranet.
    But for some users, when they open from the intranet, the child dashboard doesnt load up properly or size of the dashboard gets reduced to a small version. (Iam sure that it has nothing to do with the access/privileges)
    Any thoughts/ideas what could be causing an issue with child dashboard/resizing of the child dashboard.
    Please help!
    regards,
    S R

    Check whether the machine has compatible flash version in error specific machine and your machine.

  • Prompt Propagation Issue across dashboard pages in a dashboard

    I have a issue of prompt propagation in a dashboard, that is the various dashboard page prompts use same presentation layer column then the prompts are taking the filter values filters on each other dashboard. Even if I try to change the scope of each dashboard prompt to only dashboard page only the value propagates to next dashboard page.
    I cannot redesign the whole dashboard as it will need lot of effort , I have implemented a fix for now but I am searching for some java script code which I could invoke using OnPageLoad event to clear and reset all the page prompts to defalut values.
    Can you guys let me know if you have any java script like this.

    Can some one provide a alternative solution to this issue.
    Once more I am writing down the issue:
    On a dashboard is multiple dashboard pages multiple prompts, but if there are some prompts common between those dashboard pages which basically shares the same column formula, then these dashboard do propagate their values from one dashboard page to another.
    Even setting the dashboard page prompt scope to page only cant stop this values propagation issue form one dashboard to another.
    I know to fix it I will have to redesign the whole dashboard but that will take lot of time and effort starting from RPD to Reports.
    is there some fix to fix it in the OBIEE Answers itself without touching the RPD. I cant try changing the column formula with case statement as then the case will flow in the report query and it will not use the index defined on the columns.
    Please let me know if some one can throw some light on this.

  • Corporate sync issues

    Greetings - am having issues with corporate sync with Outlook using 2003 server.  On initial set up the calendar synced with the phone, but none of the new items I entered at work are showing up on the phone.  The emails push to the phone but not the rest. 
    Also - is there a fix for the email and not being able to search or mark all as unread issue.  If not what other mail apps would you recommend that have this feature.  I am starting to feel like this phone is a ton of hype an that's about it.  Miss my blackberry!

    Try changing your corporate email settings.  The steps are below. Hope this helps!
    If you need to adjust email frequency, notification ringtones, text size, signatures:
    Open Applications tray
    Tap on Email application  
    Your Default email account will be displayed.  (this is adjustable in email settings menu)
    Press Menu key 
    Select Email settings:         
    Email settings menu will be displayed:      
    If you are not within your Corporate account, select Default email account and select the name of your Corporate sync account. Close email application and re-open to view corporate account. 
    Touch Notifications to bring up Notifications option menu:
    Adjust notifications appearing in the status bar: Turn on (Checked) or turn off (Unchecked).
    Tap Vibrate to activate vibrate mode when you receive notifications from this email account.
    Touch Email delivery to change the frequency that emails is pulled to the device (Selections: Data push, Fetch schedule, or select to sync over WiFi only.
    Touch Compose options to change font style & size for your email account text and signature
    Touch Default Account to select account that is displayed and controlled when you select email application. You can adjust this to different account at any time. You will need to close email application and re-start for the different account to load.
    Touch Multiselect always on to enable you to select multiple emails within default account for various actions.
    If you need to change account setup details such as account name, server name password, what features are sync'd, how long to sync messages:
    Open up My Accounts application from application tray. 
    Select the Corporate Sync account you wish to modify.
    Your Corporate exchange account settings will be displayed
    Touch inside Username box to change username
    Touch inside Password box to change password
    Touch Calendar to enable (Checked) or disable (Unchecked) synching calendar from this account
    Touch Contacts to enable (Checked) or disable (Unchecked) synching contacts from this account
    Touch Email to enable (Checked) or disable (Unchecked) synching email from this account
    Touch inside Email address box to change your email address on this account.
    Touch inside Server box to change your server location for this account.
    Touch inside Account name box to change your Account name used on this handset for this account.
    Touch Use secure connection to enable (Checked) or disable (Unchecked) SSL security for this account
    Touch Verify Certificate to enable (Checked) or disable (Unchecked) certificate use with this account
    Click on arrow underneath "Sync messages for" to select how far back you will sync messages from your corporate exchange account. (1 day, 3days, 1 week, 2 weeks, 1 month, All)
    Select Remove account to remove this Corporate Exchange account from the handset.

  • Issue with siebel 7.5 dashboard prompt and grandtotals

    Hi Group
    We are having a weird issue on a dashboard page in 7.5 version.On our dashboard there is report with columns like area,area values and area values column is being filtered with a dashboard prompt.
    The dashboard prompt is working fine by applying the selected filter value but we are doing subtotals by area and grand total at the end.The subtotal and grandtotal are not changing with the filter value selected.
    Say we want to see area only having area values >=40000 the report is showing right areas applying this filter to areavalues,but the subtotals and grand totals still showing up for all areas and not for selected areas as per the filter.But when we run this report individually in Answers we are getting right subtotals and grandtotals by applying filters.
    I know description may not be very clear for you guys but can give you any kind of clarification you want in detail.
    I believe this is somekind of bug in this version.
    Please let me know.
    Thanks a lot.

    Quit the applications that you are not using. Monitor RAM usage with your Activity Monitor. Add more RAM, 6 Gigs is the max on your model.
    When your Mac runs out of RAM, it starts using swap files on your hard drive, shown as page outs in Activity monitor. Your hard drive's speed performance will be noticeably slower than your RAM's speed.
    Activity Monitor will also allow you to identify which apps are using the most RAM. The app is in your Application's Utilities folder.
    Plus, Mid 2007 iMacs's (iMac 7.1) can run Mavericks, it's free, and will make better use of your RAM than Lion, IMHO.
    P.S., If you actually have an iMac 6.1, it's a Late 2006 iMac and is limited to Lion.

Maybe you are looking for