Issue in creating formula using atributes

Hi All,
I have issues in creating formula using attributes of characteristic. I need to create a formula using attributes of charactertic customer & key figure.
Ex. Formula
Key figure / attribute of char customer
Please suggest.
Thanks,
Mamata

Hi Mamta,
I do not think we have any option of creating RKF based on Display attribute. Rather you create RKF based on Navigation attribute.
Regards,
Kams

Similar Messages

  • BW query designer - create formula using percentage variable

    Hello BW Experts! 
    I am using Business explorer query designer 7.x (based on 7.2) and I want need to create a formula based on 1 KF and a variable that the user would be able to enter when running the query.  The variable I want to pass is a percentage that will change each time they run the report and then I will multiply that percentage by the desired KF.  Any ideas?
    Thanks in advance,
      Jim

    hi Jim,
    you can achieve this using formula variable. This variable is going to be user entry variable and you can use that variable for further calculation, in your case for formula.
    thanks.
    Wond

  • Issue with creating receipts(using interface) for a PO with multiple lines

    Hi,
    We have a receipts creation program which creates creates receipts.
    The issue is, if the PO contains 2 lines then the program creates receipts for only 1 line.Can someone suggest a solution for the same.
    Issue in Detail:
    The program works as follows
    - Populate rcv_header_interface table for Po Line#1 and Line#2
    - Populate rcv_transactions_interface table for Po Line#1 and Line#2
    - Invoke oracle std 'Receivogn Transaction Processor' program
    -Check for Receipt Number generated in the base table rcv_shipment_headers
    When we query the rcv_shipment_headers table, we found receipt_number is created for only Line#1.
    The data written to interaface table are as follows
    rcv_header_interface
    header_interface_id - sequence value
    GROUP_ID - sequence value
    Processing_status_code - 'PENDING'
    Receipt_source_code - 'VENDOR'
    transaction_type - 'NEW'
    vendor_name - <<derived from Po>>
    validation_flag -'Y'
    expected_receipt_date - current date
    WHO clolumns
    rcv_transactions_interface
    interface_transaction_id - seq value
    GROUP_ID - <<as header one>>
    header_interface_id - <<header data>>
    transaction_type - 'RECEIVE'
    transaction_date - current date
    processing_status_code - 'PENDING'
    processing_mode_code - 'BATCH'
    transaction_status_code - 'PENDING'
    employee_id - agent Id of PO,
    po_header_id - <<derived from Po>>
    po_line_id - <<derived from Po>>
    po_line_location_id - <<derived from Po>>
    validation_flag - 'Y'
    source_document_code 'PO',
    to_organization_code - NULL,
    expected_receipt_date - sysdate + 3
    Document_line_num - 1
    auto_transact_code - 'DELIVER'
    receipt_source_code - 'VENDOR'
    vendor_name - <<derived from Po>>
    destination_type_code - 'EXPENSE'
    document_shipment_line_num - 1
    amount - <<derived from Po>>
    po_distribution_id - <<derived from Po>>
    Have we missed any data tobe inserted into transactrin interface table because of which the transaction processor is geenrating receipt for Line#1 only?
    Thanks,
    Kamath.

    Hi,
    I have the same problem just now.
    Have you found some solutions about it ?
    thx
    Luigi

  • How to create formula using summary total minus a non-summary total

    The report compares budget to actual. To get actual information, the amount is grouped by natural account (segment 0). The budget information is at the natural account level. The next step is to take the actual subtotal by account less the buget amount. How do I do that?
    I cannot use the summary total less the buget amount as that results in the error message that "a summary has been specified on a non-recurring field." When I research that error message, I get the notion that a running total would work, but how do I use it in the formula expression?
    The fields are @amount which is the journal line entry debit amount or the journal line entry credit amount * (-1) which is subtotalled by natural account. The budget amount is from the budget detail table (BGT1) by natural account.
    Unfortunately, I have been unable to go to training yet so I am working at a considerable deficit. This is a helpful forum community and I look forward to your reply.

    Where in the report are you trying to do this?  If you have the data grouped, then you should be able to do a SUM in the group footer .
    Something along these lines:
    //@groupsum
    SUM({@amount}),{table.AccountNumber})
    Then, still in the Group Footer put another Formuls
    //@comparison
    {@groupsum} - {table.Actual}

  • Issue in Creating Vendor using the IDOC

    Hi Gurus,
    I have an IDOC coming from PI interface from which a vendor is to be created in ECC.
    I am  using the basic IDOC  type CREMAS01, the message type CREMAS and inbound function module as IDOC_INPUT_CREDIATOR.I am concern only about the Inbound function module.
    Now I have some extra fields that are not found in CREMAS01. These fields are standard fields ( Not The 'Z' Fields like J_1IPANNO,J_1ICSTNO,J_1ILSTNO from table J_1IMOVEND). So I have extended the same idoc by adding a  'Z' segment to this idoc. now  i need to populate these extra fields for the creation of vendor(XK01). Please guide me how to Populate these extra fields ? I have got one enhancement  VSV00001 which is getting triggered while executing the inbound function module. Now using this exit i have the data from the 'Z' segment into my work area. now what will be the next procedure? please help me out.

    Hi Mamta,
    I do not think we have any option of creating RKF based on Display attribute. Rather you create RKF based on Navigation attribute.
    Regards,
    Kams

  • Partner function issues while creating SA using LSMW

    Hi,
    I am opening a new thread (though similar question has been put by Vihaan in below thread)
    Tax code in SA - LSMW
    We are creating SAs via LSMW IDOC method (Message Type - PURSAG_CREATE and Basic Type - PURSAG_CREATE01), all our SAs being created w r to Contract and Contract has multiple OA and PI partner functions. So while creating SA we are passing unique OA and PI value (from list of valid OA/PI avaialble in contract) in LSMW structures - E1BPMEOUTPARTNER and E1BPMEOUTPARTNERX.
    Values passed are mentioned below:
    E1BPMEOUTPARTNER               Partner Information for Outline Agreement
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Language Key
            LANGU_ISO                    Language according to ISO 639
            PARTNR                       Reference to other vendor
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTNR = '1XXXXXXXX9'.
            DEF_PARTNR                   Default Partner
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-DEF_PARTNR = 'X'.
            DELETE_IND                   Deletion Indicator in Purchasing Document
    E1BPMEOUTPARTNERX              Change Parameter Partner Data (Outline Agreement)
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Updated information in related user data field
            LANGU_ISO                    Updated information in related user data field
            PARTNR                       Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTNR = 'X'.
            DEF_PARTNR                   Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-DEF_PARTNR = 'X'.
            DELETE_IND                   Updated information in related user data field
    Now issue is SAP is not recognizing above mentioned partner value and throwing error as Following mandatory roles missing in partner maintenance: OA
    If the reffered contract has single OA and PI LSMW is running fine and creating SA successfully but issue is coming only when we have multiple OA/PI.
    Has anybody faced similar issue or aware if any OSS note which resolves this issue, please advise.
    Thanks,
    Yogesh

    Hi Jurgen,
    I have created a separate source structure for passing partner function and now have below source structure:
    Source Structures
           HEADER_SA            Header Structure
               PARTNER_SA          PARTNER STRUCTURE (Lower level to Header)
               ITEM_SA              Item Structure (Lower level to Header but at the same level as Partner)
    Then created a separate file for partner having both OA and PI value as shown below (ID is common field between all three structures Header, item and Partner):
    ID     PARVW     LIFN2     DEFPA
    1     BA     1XXXXXXX9     X
    1     RS     1XXXXXXX7     X
    Now after convert data step it considers above values for partner role but still LSMW fails with same error "Mandatory PF missing, OA, PI"
    Also, one more info wanted to share- if in my contract I put a tick mark against one of the partner OA/PI in DEFAULT BOX, it works fine but that does not make any sense as the whole pupose of having multiple OA/PI is to give option to business of selecting one of the avaialble OA/PI.
    FYI - I have opened a customer message to SAP, let see what they suggest.
    Thanks,
    Yogesh

  • Date Issue while creating Activity using BAPI_ACTIVITYCRM_CREATEMULTI

    Hi,
    I'm creating an activity using BAPI BAPI_ACTIVITYCRM_CREATEMULTI and this is working fine. The only thing which is not reflecting in the activity is the date which I'm passing to this BAPI. The system  always puts the default date, which is system date.
    Below are the parameters I'm passing in DATE and DATEX parameters of BAPI_ACTIVITYCRM_CREATEMULTI. Let me know if I'm doing something wrong.
    Can someone help me? Any help in resolving this would be appreciated and rewarded with points. Thanks!
        lt_date-ref_handle = lt_header-handle. "handle for activity
        lt_date-ref_kind   = 'A'. "Adm header
        lt_date-appt_type  = 'ORDERACTUAL'. "Order actual date type
        lt_date-date_from  = '20060120'. "e.g.
        lt_date-time_from  = '1200000'. "e.g.
        lt_date-date_to    = '20060120'."e.g.
        lt_date-time_to    = '1200000'. "e.g.
        lt_date-show_local = 'X'.
        lt_date-mode       = 'A'."Create
        lt_datex-ref_handle = 'X'.
        lt_datex-ref_kind   = 'X'.
        lt_datex-appt_type  = 'X'.
        lt_datex-date_from  = 'X'.
        lt_datex-time_from  = 'X'.
        lt_datex-date_to    = 'X'.
        lt_datex-time_to    = 'X'.
        lt_datex-show_local = 'X'.
        lt_datex-mode      = 'X'.
        append: lt_date, lt_datex.
    Regards,
    Sandeep

    Hi,
    Here is a sample code for you.
    *& Report  YAM_TEST_CONT_END_DATE                                      *
    REPORT  yam_test_cont_end_date                  .
    DATA: lit_header_guid TYPE crmt_object_guid_tab,
          lit_appointment TYPE crmt_appointment_comt,
          lit_status_comt TYPE crmt_status_comt,
          wa_status_comt  LIKE LINE OF lit_status_comt.
    DATA : lit_ret          TYPE TABLE OF bapiret2,
           lit_obj_to_save  TYPE TABLE OF bapibus20001_guid_dis,
           lit_saved_obj    TYPE TABLE OF bapibus20001_object_id.
    DATA: lv_header_guid   TYPE crmt_object_guid,
          lv_item_guid     TYPE crmt_object_guid,
          lv_timestamp(15) TYPE c.
    DATA: lit_fname TYPE crmt_input_field_names_tab,
          wa_fname  TYPE crmt_input_field_names.
    DATA: lit_input TYPE crmt_input_field_tab,
          wa_input  TYPE crmt_input_field.
    DATA: wa_appointment      TYPE  crmt_appointment_com,
          wa_logical_date_key TYPE  crmt_date_logical_date_key.
    CONSTANTS: lc_end       TYPE crmt_apptype     VALUE 'CONTEND',
               lc_appt      TYPE crmt_fieldname   VALUE 'APPT_TYPE',
               lc_from      TYPE crmt_fieldname   VALUE 'TIMESTAMP_FROM',
               lc_to        TYPE crmt_fieldname   VALUE 'TIMESTAMP_TO',
               lc_obj       TYPE crmt_object_name VALUE 'APPOINTMENT',
               lc_tzone_from(13) TYPE c           VALUE 'TIMEZONE_FROM',
               lc_tzone_to(11)   TYPE c           VALUE 'TIMEZONE_TO'.
    PARAMETER: p_objid TYPE crmt_object_id.
    START-OF-SELECTION.
    * Get the HEADER GUID for the Contract Number
      SELECT SINGLE guid
        INTO lv_header_guid
        FROM crmd_orderadm_h
       WHERE object_id EQ p_objid.
      CHECK sy-subrc EQ 0.
    * Get the Item GUID for the HEADER GUID
      SELECT SINGLE guid
        INTO lv_item_guid
        FROM crmd_orderadm_i
       WHERE header EQ lv_header_guid.
      CHECK sy-subrc EQ 0.
      APPEND lv_header_guid TO lit_header_guid.
      APPEND lv_header_guid TO lit_obj_to_save.
    * Convert System date and time to timestamp
      CONCATENATE sy-datum sy-uzeit INTO lv_timestamp.
    * Setting Contract End Date
      MOVE: lv_item_guid          TO wa_appointment-ref_guid,
            'B'                   TO wa_appointment-ref_kind,
            'CONTEND'             TO wa_appointment-appt_type,
            lv_timestamp          TO wa_appointment-timestamp_from,
            lv_timestamp          TO wa_appointment-timestamp_to,
            sy-zonlo              TO wa_appointment-timezone_to,
            sy-zonlo              TO wa_appointment-timezone_from.
    * Filling the Input Fields for Appointment
      wa_fname-fieldname = lc_appt.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_from.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_to.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_tzone_from.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_fname-fieldname = lc_tzone_to.
      INSERT wa_fname INTO TABLE lit_fname.
      CLEAR: wa_fname.
      wa_logical_date_key-appt_type = lc_end.
      MOVE: lv_item_guid          TO wa_input-ref_guid,
            'B'                   TO wa_input-ref_kind,
            lc_obj                TO wa_input-objectname,
            wa_logical_date_key   TO wa_input-logical_key,
            lit_fname             TO wa_input-field_names.
      APPEND wa_input TO lit_input.
      CLEAR: wa_input, wa_logical_date_key.
      APPEND wa_appointment TO lit_appointment.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_appointment    = lit_appointment
          it_status         = lit_status_comt
        CHANGING
          ct_input_fields   = lit_input
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      CHECK sy-subrc EQ 0.
    * Saving the items alone
      CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
        TABLES
          objects_to_save = lit_obj_to_save
          saved_objects   = lit_saved_obj
          return          = lit_ret.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • How to Create formulas for LIS

    Hi all,
    I want to create formula for LIS.
    i've created formula using MC1D and assigned to update rules but it didnt stop if i put break-point in that routine. I even executed generation program (RV80HGEN).
    Do i need to execute any other generation program or is there any thing else do i need to take care.
    helpful replys will be rewarded.
    Thanks in Advance.

    Hi Sam,
    Please check this PDF document on how to define formula for LIS.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOLIS/LOLIS.pdf
    Hope this will help.
    Regards,
    Ferry Lianto

  • Problem creating basic views while creating materials using idocs?

    hello,
    I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
    Looking for help. Thank you

    Hi Madhu,
    Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
    The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views.

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • Issue while creating connection pool in weblogic using SERVICE NAME

    Found two issues while creating connection pool in weblogic using SERVICE NAME
    1. While running apps from jdeveloper using xxx-jdbc.xml
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Io exception: The Network Adapter could not establish the connection
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
         at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:214)
         at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1051)
    2. Configuriing the jndi in Weblogic server
    weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:SERVICENAME
         at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:253)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1109)
         at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1033)
    Problem
    database url is generated based on SID
    eg: jdbc:oracle:thin:@localhost:1521:SID
    Solution
    (generate seperate url for SERVICE NAME)
    jdbc:oracle:thin:@localhost:1521/SERVICENAME
    ------------------------

    It is so clear: host not found error for network connection and the other SID servcie name not found means your oracle instance name is not up. check with srvctl status for given servcie name or node, else check CRS_Stat -t if you are using RAC.

  • Issue on condition value after creating PO using bapi_po_create1

    Hi ,
    I am passing condition value as 45.55  to Create PO using bapi_po_create1,
    but after Creating PO, But Condition Value reflecting ME23N as   4,555.00.
    Kindly Provide any solution if you have

    Hi ,
    I am passing condition value as 45.55  to Create PO using bapi_po_create1,
    but after Creating PO, But Condition Value reflecting ME23N as   4,555.00.
    Kindly Provide any solution if you have

  • Error in creating Formula Variable

    Hi All:
    I'm having problems in creating formula variable. Trying to create FV on a characteristic using replacement path with attribute value , but the wierd part is it's not giving me any attributes it's just blank. Any help would be appreciated....
    Thanks,
    Manasa.

    Right click on the FM, create -> Characteristic -> attribute value -> but the attribute are not showing up.  This happens if the attribute is of key figure type. I was able to do this in another system (ASIA DEV) but now trying in Europe Dev.

  • Issue in Data transfers using ALE for E-Recruiting standalone system

    Dear Experts,
    We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5.
    When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Quality servers this is not working fine.
    we have created iDocs using the following filters.
    For Object P: Infotypes 0000, 0001, 0002, 0003, 0006, 0024, 0105.
    For Objects O,S: 1032, Subtype: 0010
    For Object: 1001, Subtype: A003, A008, A012, B007
    For Object O: 1001, Subtype: A002, B002, B003, B012, Tyoe of related object: O,S
    For Objects: C, O, S, Subtype: 1000, 1002, 1028
    For Object:C, Subtype: 1001, Subtype: A007
    When we do the data transfers in Sandbox using PFAL it is transferring the data properly.
    But when we do the same iin Dev and Quality servers we are not able to do it and gettign 52, 51 errors.
    Here we are facing a strange issue. For some Users when we transfer data it is transferring data but with 52 error messgae.
    For some users I am getting 51 error where i could not transfer any data.
    For some users, when we tranfer O, S, and P related data is moving but getting mostly 52 error and all the relationships are not moving here for O,S and properly. But P related CP, BP and NA are getting created successfully.
    It is happening only in Dev and Quality server and that too some users are able to get transferred but not all.
    Where will be the issue? How can we resolve this?
    Any help will be appreciable.
    Thank you in advance.

    Hi Sekhar,
    Have a look over these threads.
    Errors in ALE data transfer to E-Recruiting.
    http://scn.sap.com/thread/1535402    
    BR,
    RAM.

  • Issue in creating OPSS Schema with rcu.

    Hi,
      There is an issue in creating the OPSS schema in oracle DB 11.2.0.3.0 even though the rcu (Oracle Fusion Middleware Repository Creation Utility 11g (11.1.2.1.0)
       completed it without any error with status of success opss schema at the end of it's creation operation.
          But the validation of opss schema is getting Failed as shown by this query ! I 've refferenced this Doc's Configuring the OPSS Security Store
    SQL> desc jps_dn;
    ERROR:
    ORA-04043: object jps_dn does not exist
      There is no error in rcu log And in opss.log as well.  Also There is NO issue in createing the Other schema's like OIM,OAM,OAAM
        Wonder what am missing here that causing the shema not reflecting or Validation of it getting Failed  in the database. 
         Also i 've tried by changing this sec_case_sensitive_logon value to False  from true in the DB but to no effect.
         in both cases the OPSS schema validation is getting failed. 
         Greately appreciate any suggestion.  
    Please see the following summary of rcu operation
    Repository Creation Utility: Create - Completion Summary
    Database details:
    Host Name                       : ebs.oracle.com
    Port                            : 1521
    Service Name                    : IAM.ORACLE.COM
    Connected As                    : sys
    Prefix for (prefixable) Schema Owners : DEV
    RCU Logfile                     : /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/rcu.log
    Component schemas created:
    Component                       Status  Logfile /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/opss.log
    Oracle Platform Security Services               Success        
      Please suggest.
    Thanks
    Priya

    Hi,
    Thanks for the response Hussein and Helios,
       I am able to solve the issue as it was due to incorrect rcu version.
      But I am really struggling to Configure Policy store for the last 10 days with the following  Error.  I would be highly obliged if you could guide me on this issue.
    I am getting stuck at this  Error while running configureSecurityStore.py.  for the error I 've refferenced these Metalink Note ID's
      But to No Avail.
    configureSecurityStore.py Fails With ORA-00001: unique constraint (DEV_OPSS.IDX_JPS_RDN_PDN) violated. (Doc ID 1547423.1) (1549203.1)
       Summarining  
       The steps that I 've followed
    1. Created the Schema's Using rcu 11g (11.1.2.0.0) on 11.2.0.3.0 Oracle DB. (OS :RHEL 64 bit)
    2. Insatlled Weblogic 10.3.6
    3. Installed   Oracle Identity and Access Management 11g (11.1.2.0.0) And  SOA 11.1.1.7.0
    4. Run config.sh to create OIM,OAM and OAAM domains
    5. Run setDomainEnv.sh from user_projects/domains//bin
      After that I tried to Configure the DB Policy store before starting the Admin Server. But getting the same error. every time it get  failed
    I 've dropped schemas and Reinstall the WLS,IAM,SOA software again But got the same Error.
      at least 20 times in the last 10 days I 've Dropped schema even created New DB and Reinstalled All the IAM Software But to No Avail
    Please see the  following Exact Error. And I would be highly Obliged if you could drop few lines as what I am missing here in the entire process.
    [oracle@ebs Middleware]$ /oracle/Middleware/oracle_common/common/bin/wlst.sh /oracle/Middleware/Oracle_IAM/common/tools/configureSecurityStore.py -d /oracle/Middleware/user_projects/domains/IAMDomain/  -c IAM -p welcome1 -m create
    CLASSPATH=/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adfscripting.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/igfwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar:/oracle/Middleware/utils/config/10.3/config-launch.jar::/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
    Initializing WebLogic Scripting Tool (WLST) ...
    Welcome to WebLogic Server Administration Scripting Shell
    Type help() for help on available commands
    Info: Data source is: opss-DBDS
    Info: DB JDBC driver: oracle.jdbc.OracleDriver
    Info: DB JDBC URL: jdbc:oracle:thin:@ebs.oracle.com:1521/iam.oracle.com
    INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:35:36 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
    INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
    INFO: Migration of Credential Store data in progress.....
    Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
    INFO: Migration of Credential Store data completed, Time taken for migration is 00:00:00
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:35:41 AM oracle.security.jps.internal.config.ldap.LdapKeyStoreServiceConfigurator schemaCompatibleHandler
    INFO: Keystore schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  checkServiceSetup - done
    Sep 26, 2013 1:35:45 AM oracle.security.jps.internal.config.ldap.LdapPolicyStoreServiceConfigurator schemaCompatibleHandler
    INFO: Policy schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    WLS ManagedService is not up running. Fall back to use system properties for configuration.
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
    INFO: Migration of Admin Role Members started
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
    INFO: Migration of Admin Role Members completed in 00:00:00
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator]  testJpsService - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  checkServiceSetup - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.config.ldap.LdapAuditServiceConfigurator schemaCompatibleHandler
    INFO: Audit store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  seedSchemaAndCreateDIT - done
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.audit.AuditServiceImpl registerInternal
    WARNING: Cannot register to audit service for component "JPS".
    Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
    INFO: Migration of Audit Store data in progress.....
    Sep 26, 2013 1:36:51 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
    INFO: Migration of Audit Store data completed, Time taken for migration is 00:00:50
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  migrateData - done
    [oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator]  testJpsService - done
    persist to output: /oracle/Middleware/user_projects/domains/IAMDomain/config/fmwconfig - done
    INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSetup - done
    Sep 26, 2013 1:36:55 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
    INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  checkServiceSchema - Store schema has been seeded completely
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  updateServiceConfiguration - done
    [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]  seedSchemaAndCreateDIT - failed JPS-10000: There was an internal error in the policy store.
    Exception in thread "main" java.lang.RuntimeException: JPS-10000: There was an internal error in the policy store.
    oracle.security.jps.internal.api.common.JpsCredentialStoreLdapNodeCreationException: JPS-10000: There was an internal error in the policy store.
         at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:303)
        at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
         at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.runConfiguration(LdapServiceEnabler.java:484)
         at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureCredentialStoreService(LdapServiceEnabler.java:232)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureSecurityServices(LdapServiceEnabler.java:170)
         at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:129)
    Caused by: oracle.security.jps.service.policystore.PolicyStoreConnectivityException: JPS-10000: There was an internal error in the policy store.
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.handleRollbackException(JpsDBDataManager.java:1345)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1508)
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransactionInDoAs(JpsDBDataManager.java:1475)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransaction(JpsDBDataManager.java:1466)
         at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
        ... 6 more
    Caused by: javax.persistence.RollbackException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
    Error Code: 1
    Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
         bind => [3 parameters bound]
    Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
    dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
    objectclass = top, EntryId = 11437:Attribute RowId = 45350
    objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
    cn = CredentialStore]})
        at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:102)
         at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
        at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$8.run(JpsDBDataManager.java:1487)
         at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1492)
        ... 9 more
    Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
    Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
    Error Code: 1
    Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
         bind => [3 parameters bound]
    Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
    dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
    objectclass = top, EntryId = 11437:Attribute RowId = 45350
    objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
    cn = CredentialStore]})
        at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:840)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:906)
         at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:592)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:535)
         at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecuteCall(AbstractSession.java:1717)
        at org.eclipse.persistence.sessions.server.ClientSession.executeCall(ClientSession.java:253)
        at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:207)
         at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
        at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:342)
         at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:162)
        at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:177)
         at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:472)
        at org.eclipse.persistence.queries.InsertObjectQuery.executeCommit(InsertObjectQuery.java:80)
         at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithChangeSet(InsertObjectQuery.java:90)
        at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
         at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
        at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:844)
        at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:743)
         at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
        at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:85)
         at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2871)
        at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1516)
         at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1498)
        at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1449)
        at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:224)
         at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsForClassWithChangeSet(CommitManager.java:191)
        at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:136)
         at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3799)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1415)
         at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:636)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1505)
         at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitRootUnitOfWork(RepeatableWriteUnitOfWork.java:267)
        at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitAndResume(UnitOfWorkImpl.java:1143)
         at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:84)
        ... 12 more
    Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
        at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1044)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
        at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3674)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1354)
        at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:831)
         ... 45 more
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.throwExceptionWithStackTrace(LdapServiceEnabler.java:145)
        at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:137)
    Error: Failed to initialize security store.
    Error: Create operation has failed.
    [oracle@ebs Middleware]$
      Also OPSS schema is FIne as it's get validated by this query.
    SQL>  select * from JPS_DN where rdn like '%cn=credentialstore%';
       ENTRYID
    RDN
    PARENTDN
          3004
    cn=credentialstore
    cn=oracleschemaversion,cn=opss,
          5004
    cn=credentialstore
    cn=jpsroot,cn=jpscontext,cn=iam,
       ENTRYID
    RDN
    PARENTDN
    Please suggest.
    Thanks
    Priya

Maybe you are looking for

  • Pictures from LR to I-movie...HELP, please! :)

    Hi all. First post here. You seem to all be so helpful that I know I will get a quick reply! I know I can't export photos from Lightroom into I-movie, but that I drag them into it, right?  So, 2 important questions regarding that:  1)  How do I highl

  • Charter FTP Upload

    So, after talking with charter (who basically told me to get bent, talk to apple...), i'm of the persuasion that there seems to be a problem with Charter's Personal Web Space FTP Upload system, and Mac OS X. Here's the 411: I go to ftp://webpages.cha

  • Major increase in data usage...could it be Facebook?

    My mother barely uses data on her phone, so i got her the 300 plan...since my uncle installed the Facebook app onto her phone, her data usage went passed her limit... is it really Facebook that is doing this? how could that be using so much data...an

  • Itunes is asking for extra id info, itunes is asking for extra id info

    i am trying to rent films and itunes is asking for extra id info like what was the first car i bought or who was my first teacher and i havent a clue - anybody out there that can help me?

  • Why are links opening slowly on my MacBookPro

    I use a MacBook Pro 17" Early 2011. Safari 8.0 (10600.1.25.1) I have had several different difficulties since upgrading to Yosemite. Processor: 2.2 GHZ Intel Core l7, Memory: 10GB 1333 MHz DDR3, (recently removed one of the 2GB modules and replaced i