Issue with import master data from BW info object using DM

Hi All,
We have master data loads on weekly basis.
One of them, product master data is loaded from 0material using DM package.
While loading the attributes we exclude couple of Products based on the attributes (say Product sub family)
ex - Having conversion file which excludes product sub family - ML. so all the products under that sub family are excluded from the load.
Hierarchy load - How can we skip the products which are excluded during attribute run?
For the first hierarchy load, we copied all the product ID which are part of product sub family - ML and entered in conversion file "NODENAME" and "PARENT" to skip.
But during the subsequent runs, whenever we have a new  product under Family ML the hierarchy job fails. Attached the error. we then manually enter that product to be excluded in the hierarchy load and the job runs fine.
Is there a way to automate this process.
Version - BPC 10 SP 17 .NET 3.5
Appreciate any thoughts on this.
Thanks in advance/
Raghu

Thanks for your response.
We are currently using the first option you have mentioned. But the problem is when we have new product coming in BW (which is part of attribute we skip while loading attributes from BW to BPC) we manually need to add that product to skip in hierarchy conversion file also.
As i can see, the selection option to skip is available only while loading the attributes but not for hierarchy load.
Please correct me if am wrong.
Regards,
Raghu

Similar Messages

  • While Loading Master data from BW Info Object

    Hi,
    What is the difference between the two options
    "set filters by Attributes AND Hierarchies" and
    "set filters by Attributes OR Hierarchies"
    when we load master data attributes/texts from BW Info Object.
    can someone please explain in detail with example.
    Thanks,
    Rishi

    Hi Rishi,
    While looking at your question -
    What is the difference between the two options
    "set filters by Attributes AND Hierarchies" and
    "set filters by Attributes OR Hierarchies"
    when we load master data attributes/texts from BW Info Object.
    can someone please explain in detail with example.
    This is not what you are explaining in second post.
    Kindly close old threads properly if your queries are resolved , so that it will helps other.
    Shrikant 

  • Importing master data from R/3 through functional modules

    I am facing the below error when I try to import master data from R/3 through the inbound functional module /DMF/MDIF_PRODUCT_INBOUND to the PMR component (PMR - Promotion Management for Retail).
    "Runtime error CALL_FUNCTION_NOT_FOUND has occurred"
    Landscape - I have RTLDMF 1.1 and RTLPROMO 7.0 installed on top of Netweaver with EHP1 in a server which also has BI system. While the R/3 is present in another system.
    Appreciate any help. Thanks!

    Hi Khan,
    You can create your own datasource source, by Tcode RSA2. In this link you find more information:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/28/4c553c42360a40e10000000a114084/content.htm
    Also please check this link, that provides the steps to create/maintain the generic datasource:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    I hope it contributes.
    Regards,
    Sinara Moraes

  • Issue while loading master data from BI to BPC

    Dear All,
    I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
    I haven't restrict any ID's using conversion file as well.
    What could be the reason? How can I overcome this and load all member's ID in BPC?
    Thanks & Regards,
    Ramesh.

    Ramesh,
    Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
    Check if you have the Update mode ..
    Hope this helps...

  • How 2 upload Master Data 4 a Info Object in BI 7.

    Hi,
    I have to load Master Data to a Info Object in BI 7 ( Like Diret Update in 3.5 )
    How 2 upload Master Data 4 a Info Object in BI 7.
    Dont suggest me to " Insert Characteristic as Data Target".
    Points assured.
    Thank you.

    hi...chk these steps..
    Uploading of master data
    Log on to your SAP
    Transaction code RSA1—LEAD YOU TO MODELLING
    1. Creation of Info Objects
    • In left panel select info object
    • Create info area
    • Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
    • Create new characteristics and key figures under respective catalogs according to the project requirement
    • Create required info objects and Activate.
    2. Creation of Data Source
    • In the left panel select data sources
    • Create application component(AC)
    • Right click AC and create datasource
    • Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
    • In general tab give short, medium, and long description.
    • In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
    • In proposal tab load example data and verify it.
    • In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
    • Activate data source and read preview data under preview tab.
    • Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
    3. Creation of data targets
    • In left panel select info provider
    • Select created info area and right click to select Insert Characteristics as info provider
    • Select required info object ( Ex : Employee ID)
    • Under that info object select attributes
    • Right click on attributes and select create transformation.
    • In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
    • Activate created transformation
    • Create Data transfer process (DTP) by right clicking the master data attributes
    • In extraction tab specify extraction mode ( full)
    • In update tab specify error handling ( request green)
    • Activate DTP and in execute tab click execute button to load data in data targets.
    4. Monitor
    Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
    hope this helps..

  • Issues with loading master data and hierarchy from BI InfoObject

    Hi,
    I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
    What is the reason it deletes the space from technical ID? and how can I resolve this issue?
    Do we have a provision to write a ABAP exit where I can check?
    (PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
    Thanks in advance,
    Diksha.

    Hi,
    You can check this in start routine which can be called from Transformation file using BADI.
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
    Hope this helps...
    regards,
    Raju

  • BPC NW - Error Importing Master Data from BI to BPC

    Hello,
    I am importing MD from BW to BPC; openhub is working as required, and creating the corresponding file in the application server.
    However, when I run the package from Data Manager, it is displaying the following error:
    "An exception with the type CX_SY_STRUCT_COMP_NAME occurred, but was neither handled locally, nor declared in a RAISING clause.
    No Component name specified for Component 6."
    I have been looking other posts and OSS notes, and looks a problem related to DB; however in this case we do not have any dump.
    Has anyone encountered the same issue?
    Thanks&Kind regards,
    Begonia

    Hi Begonia Boloqui,
    After you extracted master data from BI using Openhub. The file is available in the application server.
    Before you run the package from Data Manager.
    Please examine the file data contents.
    From the Action Pane, Click Manage Data and then clicking Preview data file
    System allows you to preview the first 200 lines of a data file. Check whether data record is compatible with dimension definition and the mapping from external to internal members.
    Looks like error is with COMP_NAME field?
    Hope this information is useful.
    Regards,
    Rajesh Muppala.

  • Need help with loading master data from R/3 to BI 7.0.

    Hi,
           First i thank everybody who took efforts to answer for my posting, i really am learning this new version with your helps. I really appreciate  it.
    Could any one help me with a step by step process to load master data from R/3 to BI 7.0. Please don't send help.sap.com.
    will assign points .
    With Thanks,
    Ranjani R

    Hi,
        Thanks for the answers. I tried loading it yesterday, i had lot of confusions.
      What should i do to load a master data from a R/3 to BI7.0.
    1. Created a Info object named (EKKO_mas) with some attributes (ernam, ekorg, lifnr).
    2. Go to info provider and right clicked on info area and selected insert char as data target. (Please correct if i am wrong).
    3. Login to R/3, go to sbiw generic data source created one with a view/table as EKKO and map the application compound and select the needed fields by checking the checkbox. (please correct if wrong).
    4. Go to source system tab and replicate data source. ( Please correct if i am wrong)
    Then what should i do.
    guessing steps:
    4. Create a Data source, in BI 7.0 . In that as i am not using flat file, should i select "application server" instead of "local workstation" . In field tab i specified all the fields given in Info object. ( Will there be anything else i should do or change in this tab)
    5. Load data in PSA. ( will the data from R/3 i selected loaded in PSA without any problem)
    6. Create transformation , save and activate.
    7. Create DTP save and activate , click execute.
    By doing the above given step will i be able to load the master data from R/3 to BI 7.0 data target (IO) .  Please help me if something is wrong with my steps.
    Thanks.
    RR.
    *will assign points.

  • Issue while loading master data from BI7 to BPC

    Dear Experts,
    I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
    My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
    1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
    2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
    What could be the reason to not getting BI infoobject as source in BPC?
    Thanks in advance...
    regards,
    Raju

    Dear Gurus,
    My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
    Thanks and regards,
    Raju

  • Issue with 0hrposition master data

    We are extracting data from SAP using 0HRPOSITION_ATTR datasource. I noticed that data is not maintained correctly in master data tables in BW and giving us incorrect results in reporting. Consider below mentioned scenario:
    Position A created as vacant on 04/01/2006 with start date (BEGDA/ Valid from) as 04/01/2006 and End date (ENDDA/ Valid to) as 12/31/9999 and is vacant. Below mentioned entry is shown under maintain master data for 0HRPOSITION in BW:
    Position Valid To Valid From Position Vacant
    A 03/31/2006 01/01/1000
    A 12/31/9999 04/01/2006 X
    Position A is now delimited on 09/15/2006 as it’s no more required. In SAP, position has record only from 04/01/2006 till 09/15/2006 as vacant. When record is extracted in BW, it creates below mentioned entry in master data table.
    Position Valid To Valid From Position Vacant
    A 03/31/2006 01/01/1000
    A 09/15/2006 04/01/2006 X
    <b>A 12/31/9999 09/16/2006 X</b>
    Entry 09/16- 12/31 is incorrect as position doesn’t exist for this duration. If we report on 0HRPOSTION with key date as 09/30/2006, it shows position A as vacant though position no longer exists.
    Has anyone come across this situation. any help is greatly appreciated.
    Kamal
    P.S: Milind Rane...I was searching through the forums and came across your post.I would appreciate if you could let me know how you solved this issue...
    Message was edited by:
            Kamal K

    HI KK
    I have a similar issue. Can you please let me know how this Issue with 0HRPOSITION_ATTR extractor was resolved. In my case i have incorrect data in BW when reporting is done. THrough the extractor untill the PSA i have the correct records coming  but in the master data 0HRPOSITION i have incorrect records.
    Please help.
    Thanks
    Hari
    Message was edited by:
            SAPCOOL

  • Issues with importing song data and artworks

    Hi all,
    I am having annoying problems with importing songs to iTunes. I recently reinstalled my OS (Windows 7) and iTunes. Now, that I want to import all the songs, I'm facing some difficulties:
    1. iTunes just won't import song data for some albums, although they are clearly included in the song. Windows Media Player has no problems with them, it is just iTunes. Funny thing, so far it only happens to songs previously encoded by iTunes...
    2. A very general problem: iTunes doesn't import artworks properly, coming with the files. Even if it is music that was previously imported by iTunes. I can see the artwork in the Windows Explorer and in the Windows Media Player... but not in iTunes. But then again, sometimes, it works automatically... maybe 1 out of 6 albums...
    Any ideas? maybe it's the ID3 tag version, script issues (UTF, vs. ASCII,...)
    Cheers. Alex.

    Update: I had a couple of more such issues, where the album and/or the artist were imported as "unknown". When I went into the ID3 tags, I saw, that ALL OF THEM had a "0" written into their comments. And ALL OF THOSE albums were either imported through through, or bought from iTunes. Apple Hurray. :-/

  • Issue with Vendor Master Data-field notes ID  (Table ADRT-REMARK)

    Hello,
    I have a issue related to Vendor Master Data maintenance.
    The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
    Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
    The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
    Also please note that CATT/e CATT is not permitted at all the client level.
    Can any body suggest the way to change the master data through some way.
    Regards,
    Chepan

    Hi,
    Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP  like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
    If you have any questions I try to help you?
    Best regards,
    Piotr
    Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

  • Issue with importing effects settings from 3.0 to CS5.5

    Several times I've attempted to import effects settings from 3.0 into 5.5 using the 5.5 Import>Application Settings function.  Each time it says that it is unable to do it because of some unknown error.  Is there another way to import the settings?  I'm in the middle of an album project in 3.0.1 and would like to try 5.5 with some of these existing sessions.  I've used the SuiteSpot studios Ses2Sesx program to translate the session.  It imports fine, but none of the effects or racks import.  I very much want to be able to do that. 

    Hi Michael,
    These effects are mostly external VSTs, but a few of them are native
    (Parametric EQ).  The program will just not import the settings .xml
    file or the vstmanager settings .xml.  The VSTs seemed to have been
    found easily by the program.  I have not yet gone through them all to
    see if they will pop up.
    Another interesting thing - when I installed AACS5.5 I lost the ability
    to open AA 3.0.1.  I had to reinstall 3.0.1 in order to be able to use it.
    I'm not liking this program at all.  I don't like the interface, the
    GUI, or the navigation through the program.

  • Assigning Text of a master data to another info object

    Hi,
    I need to assign text of a master data infoobject, to another inobject.
    Can i directly read the two tables (master data and its text table ) and assign it to the info object in the update rules?
    Sample code would really help.
    Thanks.

    Hi Thomas,
    We've folllowing info objects.
    info1.
    info2.
    Scenario : We weant load text data from info1 to info2..
    Crate Export data source for info1.
    Go to info2 : insert this info object as a data target.
    Assigin source : info1 export data source.While assigning it'll ask do u want Attr or Text .Say text .
    Plz assign points if it is useful.
    Thanks,
    Vijay Sekahr Reddy.

  • To delete unsed master data's in info object

    Hi.,
      Can any one please tell me how to delete unused master data's in an info object.
    Thanks,
    Selva

    Hi,
    Select the info object fro which you want to delet the data. Right clik on the info object and select delet master data. This will delete all the matster data whcih is not used any where in transaction data. The data which is used will not get deletd. Save the data.
    Hope this helps.
    Regards,
    Amol

Maybe you are looking for