Issue with indirect Quotation Exchange rates...

Hi All,
I am using FM 'POSTING_INTERFACE_CLEARING' to clear the customer open items.
While posting with indirect quotation exchange rates i.e BKPF-KURSF is in negative.It is throwing below error
"The Exchange rate may not be transferred if negative".
When i check it in BKPF table the value is saved like exp: '/1.9010'. for select query it is picking like '1.9010-'
How to resolve this issue.? it is very urgent.
Thanks in Adv.
Regards,
Raj.

Hi,
I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
Your local currency is USD:
- Direct exchange rate: 1CAD = 0.92819 USD
- Indirect exchange rate: 1USD = 1.08238 CAD
The following settings have been made in the standard system:
- Direct quotation: ' '
-   Indirect quotation: ' / '
Direct exchange rates do not have a prefix.
Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
         - '1' for direct quotation
         - '2' for indirect quotation
If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
Thanks
Ganesh

Similar Messages

Exchange Rate Issue ( Ditect & Indirect Quotation )

Dear,
Alll Experts.
I am stuck up at one level , that is Exchange Rate issue.
User is creating shopping cart in SRM, Local Currency is USD and the goods is ordering from Canada ( CAD ).
While doing this amount is getting calculated   in - ( Negative ), And it is going to wrong approval for shopping cart approval.
When I see the TCURR table I am seeing there as negative sign in exchange rate because it is maintained in Indirect Quotation.
I want to calculate the same amount in postive figure.
How this can be achieve? If I maintain the same in direct quotation it will calculate positive but final amount will be bigger which is not proper one.
Experts guidance will be helpful.
Regards,
Sharvari Joshi.

Hi,
I gave the OB08 entries, not sure if you wanted me to explain the logic. Here it is..
Maintain 'Indirect quotation' from Local currency(USD) to Transaction currency(CAD) and 'Direct quotation' from Transaction currency(CAD) to Local currency(USD).
Direct quotation is where the cost of one unit of foreign currency is given in units of local currency, whereas indirect quotation is where the cost of one unit of local currency is given in units of foreign currency.
Your local currency is USD:
- Direct exchange rate: 1CAD = 0.92819 USD
- Indirect exchange rate: 1USD = 1.08238 CAD
The following settings have been made in the standard system:
- Direct quotation: ' '
-   Indirect quotation: ' / '
Direct exchange rates do not have a prefix.
Your local currency is USD. You enter a business transaction in the transaction currency CAD. Until now, you had to use direct quotation to enter the exchange rate (1CAD =0.92819 USD). If you have defined '/' as the prefix for indirect quotation, you can also enter the exchange rate with indirect quotation (1 USD = 1.08238 CAD) by entering '/1.08238' in the exchange rate field.
Direct or indirect quotation can be maintained as the standard form of quotation for a certain currency pair. You use:
         - '1' for direct quotation
         - '2' for indirect quotation
If a standard form of quotation has not been specified for a currency pair, the system automatically uses direct quotation.
You make the settings in the IMG: General Settings -- Currencies -- Set Standard for Direct/Indirect Quotation per Currency Pair.
Thanks
Ganesh

Indirect and Direct quotations - Exchange rates

Hi,
BW question.
I have a local currency which is GNF (Guinea Franc) and I want the order to be shown in EUR. However when I put indirect quotation it is shown in GNF but when I put direct quotation it is shown as EUR. I need to know what the differences this will cause in the system if I change from direct to indirect? And furthermore if the exchange rate is 0,00010 its not working but its working if its 0,00011.
Please help.
Thanks

Hi,
I would suggest you post your question into the SAP NEtWeaver BW forum.
regards
Ingo Hilgefort

Profit center report with old currency exchange rate

Dear All,
I have a requirement in PCA reporting. We have maintained exchange rate as 1.86 Egyptian pound to 1 Saudi Rriyal from 01.01.2001 to 31.03.2014. Also, from 01.04.2014 onwards the exchange rate is 1.90 EGP to 1 SAR. When we run PCC report on 05.04.2014 it is picking that day rate as 1.90 and showing the same in PCA report.
But now, my client wants the exchange rate to be calculated with old price 1.86 in the report. Is there any way to pick old exchange rate in PCA reporting?
BR, Srinivas Salpala

Hi Srinu
RPC0 applies to CC reports and not PCA reports
I am surprised by your statement that Summary reports derive values based on Current Fx rate
GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
I am still not convinced about your issue.. Why do you need currency conversion in report?
Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
Ensure that the All Currencies indicator is turned ON for your contr area
Br. Ajay M

Currency conversion with the wrong exchange rate type

Hi,
I need a currency conversion in my bex query. I have defined a currency translation key with a assignment to the exchange rate type "M".
When I check the results in the query it works with exchange rate type "EURX".
Exchange rates are in the TCURR.
Can anyone help me.
Thanks in advance
Jürgen

Hello,
We just had the same issue, and in checking the Currencies: Translation Ratios in transaction OBBS, I noticed that the currency translation key in question was set up with an entry of "EURX" in the "Alt. ERT" column.
I copied the line and created a new entry with a "Valid From" date of the current month, but without the "EURX" Alt. ERT alternate and that seemed to solve it.
Anything entered with a date after the new Valid From date would use the manually entered exchange rate, while anything with a prior date continued to use the EURX rate.
It appears to me that the "Alt. ERT" functions more as an override than an alternate, so if you want the system to actually use the "M" rate, I believe you have to ensure there is nothing in the "Alt. ERT" column.
I hope this helps.
Blaine

Residual items are created with the current exchange rate

Hello,
When a residual item is created due to a short payment for an invoice, the residual item is created with the exchange rate that is in effect on that day. Is it possible to assign the exchange rate equal to the rate that existed on the original invoice.
Thanks in advance for you ideas.
Karla

Hi,
You can use transaction FB05 for doing the clearing there you would be able to input the exchange rate you need for clearing the AP/AR/GL items.
But the exchange rate at the time of making/receiving the payment or at the time of clearing is what should be applied.
Regards
K.R

Posting automatic payment with hedged PO exchange rate

Dear All,
Is there any way to make the payment in f110 with the Hedged PO exchange rate?
Regards
Shanu

Dear Aravind,
Thanks for the reply, I have maintained the Exchange rate type in table TCURV & Table TCURR with exchange rate as blank vlaue since I want the same to be picked up as fixed which is maintained in PO.
But while doing the Payment run if I select the Exchange Rate type Fix the payment is processed ahead showing an error "onversion factors missing for rate type FIX currency USD -> INR", please advice how to go ahead,
I wouldnt be maintaining the Exchange Rate for exchange rate type Fix..
Thanks again
Thanks & regards
Sameer Chitre

Currency translation with user defined exchange rates in a BEx report

Hi guys,
our business department requests a new functionality in our BW system. They want to simulate a currency translation in a BEX report. But this currency translation should be so flexible, that the user can change the exchange rates directly in the report.
For example: The report should show a list of all our local company revenues. In the first column the plan revenues will be shown in the local currency (each company has its own local currency: USA->USD; Japan->YPN, Great Britain->GBP and so on). This revenues comes from a normal infoprovider, loaded via flat-file.
In the second column the user should be able to enter or change a plan currency rate. The entered exchange rates should be stored in BW for a next use. They won't maintain the rates directly in TCURR, because this rates are only for simulation use !
In the third column the translated Revenues in Euro currency has to be shown under the use of the exchange rates from the second column.
I investigated a lot of time in the SAP help and here in the SDN, but I didn't find any solution to realize this. Is there generally a possibility to make a currency translation with exchange rates out of the TCURR? Would it be an option to use the integrated planning function of BW? Or is this requirement to far away for an simple implementation in SAP BI ?
I hope, someone of you has also fixed a similar problem or has a good inspiration.
Thank you in advance.
Thomas

thanks for the prompt reply!
Unfortunately, exchange rates are not a part of my cube. They are held in different tables, and referenced depending on what kind of exchange rates I need to be looking at (average rates, daily, planning etc.). The only way for me, at the moment, to know which rates have been used is to go to query global view, and look at the type of conversion, and then try to figure things out. Plus there can be a different key date used in the query, which makes things more complicated.
Anyway, it was worth asking
Thanks again.

Issues with setting up Exchange Server 2013

Hi All
Not sure what im doing wrong yet i am having issues with exchange server 2013.
Currently I have got general SMTP Mail flow working. as long as i log onto the local servers OWA (https://10.x.x.x/owa) i can log into a users mailbox. i have tested sending and recieving mail using this and it works.
My main issue now is with accessing the OWA externally via our website. (owa.xx.xx.au/owa) or connecting ANY Outlook to the server.
When i connect to the exchange server via outlook it asks for the password again multiple times never authenticating it then time's out and says:
" the action cannot be completed. the connection to microsoft exchange is unavailable, outlook must be online or
connected to complete this action "
then when i click on OK it goes to the General Tab and under microsoft exchange server: the name for it appears as
[email protected]
with mailbox set as:
=SMTP:[email protected]
Currantly on our DNS i have
mx= 10 mail.xx.xx.au
CNAME= autodiscover = mail.xx.xx.au
CNAME= OWA = mail.xx.xx.au
A = mail = 12.34.56.78
On our modem/router i have set one-to-one nat to our firewall IP
On our firewall i have
SMTP SAT and NAT to Exchange server
HTTPS Sat and NAT to exchange Server
HTTP Sat and Nat to exchange Server
Port 587 SAT and Nat to exchange server
pop SAT and NAt to exchange server
Im willing to bet its something stupid i have overlooked but i was wondering if anyone would be able to help me out
Regards
Sibsy

Hello,
Firstly, please follow the Shadab's suggestion to check related virtual directory settings.
Please make sure you use certificate that's created by a CA that's trusted by the client computer's operating system.
Please use get-outlookanywhere | fl cmdlet to check ExternalClientAuthenticationMethod. By default, the authentication is Negotiate.
Cara Chen
TechNet Community Support

Issue with WRVS4400N v2 bandwith rate control (firmware 2.0.1.3)

I have an issue with the QOS setting / bandwith rate control.
I've tested it with a new factory config.
Setup : limit my IP (all ports) to max rate at 512 Kbit/sec (min rate to 1 Kbit/sec) in downstream and enable checked.
When I test my speed, there is no limit.
If it try the exact setup with a RVS4400 (without wireless) it works fine!!!
Does anyone have this issue or know how to solve it???
Thanks in advance
Al
Here is my setup... (and yes when I made sure I'm using 192.168.1.101 while doing the test...)

I have upgraded to the latest firmware V 2.0.2.1 with no difference.
The Rate control function is not working at all.
Cicso doesnt appear to want to fix it.

Issues with Lotus to Exchange 2010 Invites

Hello,
I am having an issue with 1 or 2 users that happens when they are cc'd on a meeting invite from lotus notes. When these users are CC'd on an invite, the invite goes directly to the deleted items. I have checked for any rules in Outlook and did not see any
rules for these users at all. I also checked them using OWA and there were none. This happens even if Outlook ios closed and the user is only logged into OWA. The first user that experienced this is not using a mobile device at all for accessing email so it
does not appear to be related to a mobile device. We noticed this began right after migrating the user from Exchange 2003 to Exchange 2010, and believe it is related to that.
Thank you
Travis Van Ness

Hi,
Since it's an issue which seems more likely related to Exchange, we'd better post this question in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
Before that, we can still check some settings on Outlook to see if that may be related. Please try the following steps:
Microsoft Outlook 2007
From the Tools menu, select Options.
Select the Preferences tab.
Select the Email Options button, and then select the
Advanced Email Options button.
Make sure the Delete meeting request from Inbox when responding checkbox is not selected.
Select the OK button on the three dialog boxes to close them.
Microsoft Outlook 2010 & 2013
Click the File tab, then Options, and then select
Mail.
Under the Send messages heading, make sure the Delete meeting requests and notifications from Inbox after responding checkbox is not selected.
Click the OK button to close the dialog box.
Hope this helps.
Regards,
Melon Chen
TechNet Community Support

Calendar Sync Issue with Outlook 2007 / Exchange

Contacts are syncing fine.
I;ve tried Outlook 2003 and 2007... same problem with both.
Here's the error:
Microsoft Office Outlook
'OutlookSyncClient' exited without properly closing your Outlook data file 'C:\Documents and Settings\Brandon\Local Settings\Application Data\Microsoft\Outlook\outlook.ost'. 'Microsoft Office Outlook' must be restarted. If this error message recurs, contact support for 'OutlookSyncClient' for assistance.
Any help would be appreciated.

So here's the only solution I've got so far and obviously it is not ideal...
I switched to a different computer and installed outlook 2003. No calendar at all prior to this. Installed iTunes 7.4.x and plugged in the iPhone. I told it to sync contacts and calendar (merge) with Outlook. I DID NOT connect this outlook client to the exchange server at all.
Worked like a charm. I still have no idea how to get this working with Exchange. OST by default is the way cached exchange stored files... so I'm welcome to any suggestions for somehow getting everything into a clean pst file that still syncs for offline use with exchange.
APPLE - outlook sync is an issue. It's not just me (google search proves it).

Issues with Indirect xml configuration using environment variable

My package is not retrieving the the connection strings from the xml file setup through indirect configuration. It is using the connection string directly from the connection manager in the package. Steps below,
Package-1 has Connection Manager with server : dev, database: Test
Setup indirect xml configuration : XML file contains the connection string. Environment variable contains the path to the xml.
Build and deploy on different server (prod).
Create the same environment variable in prod server.
Change conenction string in xml file.
Run the package: package tries to connect to dev instead of prod.
Change the connection string in the connection manager directly in the package. Build and deploy. Works now - connects to prod as expected.
For some reason my package is not reading from the xml file.
Anonymous

You posted on this issue before and now again, why?
The "It is using the connection string directly from the connection manager in the package" means the package fails to configure from the conn string in the env. variable.
You may see it as a warning in the log if you have one enabled.
The env variable should have the path to the config file, the config file should be parametrized to get the connection to it via the variable, this is the proper scenario.
Arthur My Blog

IPad issue with appointments in exchange

I have an iPad2 connecting to Exchange 2012. I tentatively accepted a meeting from my iPad. It kept sending the tentative acceptance many times per minute until I went to my desktop and sent it as tentitive. I guess my question is, has anyone else seen this issue? And if so, how did you fix it?
Thanks!

App store frequently asked questions
http://support.apple.com/kb/HT2001
Cannot connect to iTunes Store
http://support.apple.com/kb/TS1368

Port-channel issue with FI-N7k using rate-mode share

Hi Dears,
I'm trying to using port-channel between Fabric Interconnect (FI) and N7K. in N7K use rate-mode share and LACP but the port-channel in N7K was suspended.
I was trying :
1. I using non dedicated port in Nexus 7010.
      - rate-mode share
      - channel-group 1 mode active
      - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
2. I using non dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode on
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up, but in Fabric interconnect was failed.
3. I using dedicated port in Nexus 7010
     - rate-mode share
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was suspended
4. I using dedicated port in Nexus 7010
     - rate-mode dedicated
     - channel group 1 mode active
     - switchport mode trunk
when i using this option, the port-channel in Nexus 7010 was came up and running well.
is any other way to configure port-channel in N7K with rate-mode share and LACP ?
or it's some of limitation in port-channel when using rate-mode share at N7K ?
nb: fabric interconnect only support LACP and cannot be configurable.
regards,
Berwin H

HI Mark,
1. Can you please check your ethernet card ...where this port channel connected..on the server.
    may be there are 2 different card.
2. from cisco websites:
Error Message
Explanation
This port has different port attributes than other ports within the port channel.
Recommended Action
Match the port attributes to that of the port channel.
Regards
Please rate if it helps.
Match the port attributes to that of the port channel.This port has different port attributes than other ports within the port channel.
EC-5-CANNOT_BUNDLE_LACP: [char] is not compatible with aggregators in
channel [dec] and cannot attach to them ([char])

Issue with indirect Quotation Exchange rates...

Similar Messages

Maybe you are looking for