Issue with unregistered candidates registration
I have created a service user RCF_WD_SERV an have mapped the role
ZSAP_RCF_UNREGISTERED_CANDIDAT and SAP_BC_USR_CUA_CLIENT.
also I have created a reference user RCF_CAND_EXT and mapped the role
ZSAP_RCF_EXTERNAL_CANDIDATE.
but when I test the hrrcf_a_candidate_registration it asks for the
Login credential.
RCF_WD_SERV has been mapped to the service.
Thanks and regards,
Divya
Go to transaction SICF and navigate to the service node of your BSP / ABAP WD application and go to Logon data tab. enter the Client Username Password and Language.
Then keep Standard radio button checked in 'Security Requirments' area and standard R/3 user checked in area 'Basic Authentication'.
That should work.
br,
Wim
Similar Messages
-
Performance Issue With Displaying Candidate Details for iRecruitment
We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant> the page spins for a quite whille to show the results and some times we see the 500 errors..
We are in R12.1.3 and also applied the Patch.10427777:R12.IRC.B patch.. is there any tunnign steps for the iRecruitment page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPGYou have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
thanks -
Performance issues with respect scheme registration,select & insert query
I am facing performance issues with respect to schema registration,Select & insert query towards 10.2.0.3 version.It is taking around 45 minutes to register schema and it is taking around 5 min to insert a single document into xml db where as it was taking less than min to insert a single document into xml db of 9.2.0.6 version.Would like to know the issue and solution to resolve this issue.Please help me out on this as it is very urgent for me
Since it appears that this is an XML DB specific question, you're probably better off posting in the XML DB. The folks over there have much more experience with the ins and outs of that particular product.
Justin -
E-Recruiting 6.04. Issue with internal candidates e-mail.
Hi,
We are on E-Rec 604 with seperated standlone e-rec system.
We did the initial transfer of employees with ALE and we though that all were ok, but now we realized that there are some internal candidates that no have e-mail adress in e-recruiting.
We have been investigating and those employees have filled the infotype 105 subtype 0010 in Hr system. In E-Recruting system the user created by ALE has the e-mail too, but in transaction BP only a few of them have filled the field e-mail in the block of adress independent comunication. So only this few internal candidates have e-mail in the portal of E-Recruiting.
We are looking for any differences of those employees in HR system but we can´t find anything.
Someone could help me with the reason of this problem, please?.
And someone know if there is any way for repared this in the e-recruiting system.
Best Regards,
EstherHi,
I just want point out the HCM ALE processes. Firstly independently of connected to eRecruiting or not.
The message type HRMD_B is containing the infotypes belonging to the software component SAP_BASIS.
The message type HRMD_ABA is containing the infotypes of the message type HRMD_B and the infotypes belonging to the software component SAP_ABA.
The message types HRMD_B and HRMD_ABA must be used to distribute HCM data into non-ERP based landscapes.
The message type HRMD_A is containing the infotypes of the message type HRMD_B and the infotypes belonging to the software component SAP_HR. It should then be used to distribute HCM data into an ERP based landscapes.
Esther is describing an eREcruiting standalone based on an ERP landscape. Therefore, the message type HRMD_A should be used.
Then, from the HCM integration in Business Partner point of view, the standard implementation of the BAdI HRALE00INBOUND_IDOC should be deactivated. This implementation is normally converting the object P into a CP, because the object P is known only in HR (and ERP based landscape). In an ERP based landscape, the P will exist with its CP. The integration to the BP will not work during the ALE-Inbound process, but during the Synchronization run (report HRALXSYNC). The implementation makes sense only in none-ERP based landscapes (where message type HRMD_ABA will be used).
Ester should then adapt her distribution model to be able to distribute the necessary infotypes for the consistency of a P (infotypes 0000, 0001, 0002, 0003) as well as the one which are used for the BP-integration (infotype 0006 subtype 1, infotype 0009, infotype 0105 subtypes 0001, 0005, 0010, 0020), as well as the HR-object CP and its relationship to the P (infotypes 1000 and infotype 1001 subtype B209).
With the hope it is clarifying the usage of the message types depending on the used scenario and on the used landscapes.
Best regards.
Pierre -
EPM 11 - Issue with Shared Services Registration and DB configuration
Hi,
Im installing Oracle EPM 11.1.1...
I have successfully installed Foundation Services and Essbase Server/Client...
But I'm facing two issues...
1. I couldnt able to register any products to the Shared Services except for Essbase Server
I tried restarting the services (1) Hyperion Foundation OpenLDAP, (2) Hyperion Foundation Shared Services - Web Application in the same order...
2. I couldnt able to configure Oracle 10.2.0.1.0 for Essbase Administration Services...
It shows the below error...
"com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Registeration failed: null.Registeration failed: null.
at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:200)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:427)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:212)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Registeration failed: null.Registeration failed: null.
at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:212)"
But I could use the same version of Oracle database successfully for Shared Services and Essbase Studio database configuration...
Please help me to resolve this issue....
Thanks & Regards,
dmazeHello!
During your first configuration of the EPM System Fusion Edition, configure the two conponents first - COMMON SETTINGS and CONFIGURE DATABASE. Never configure other components together with these two (especially Workspace). After you have configured these two, then you can rerun the configuration utility and configure the components that you left out.
Hope this helps.
Cheers! -
Issue with example "Self Registration" workflow
Hi,
I am using OIM 11.1.1.5 on exalogic platform. I am trying to register the "Self Registration" workflow (http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/Request_Workflow_for_Self_Registration/request_workflow_for_self_registration.htm), and I am currently stuck on step 13 of section "Registering the Custom Approval Process". When I run the ant script, the following error occurs:
[java] Exception in thread "Main Thread" oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/SelfRegistrationApproval!1.0 due to Invalid Token Error in Verification Service.
[java] Invalid Token Error in Verification Service. Received invalid token in createContext.
[java] Verify that correct token is passed.
[java]
[java] at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_1035_WLStub.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
[java] at $Proxy2.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceDelegate.registerWorkFlowDefinition(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
[java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[java] at weblogic.security.Security.runAs(Security.java:41)
[java] at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
[java] at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
[java] at $Proxy3.registerWorkFlowDefinition(Unknown Source)
[java] at oracle.iam.platformservice.workflowregclient.WorkflowRegistration.main(WorkflowRegistration.java:42)
[java] Caused by: oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/SelfRegistrationApproval!1.0 due to Invalid Token Error in Verification Service.
[java] Invalid Token Error in Verification Service. Received invalid token in createContext.
[java] Verify that correct token is passed.
[java]
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.mapWorkflow(WorkflowRepositoryImpl.java:132)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.registerWorkFlowDefinition(WorkflowRepositoryImpl.java:113)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowServiceImpl.registerWorkFlowDefinition(WorkflowServiceImpl.java:230)
[java] at oracle.iam.platformservice.impl.WorkflowRegistrationServiceImpl.registerWorkFlowDefinition(WorkflowRegistrationServiceImpl.java:38)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
[java] at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
[java] at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
[java] at $Proxy452.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.__WL_invoke(Unknown Source)
[java] at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_WLSkel.invoke(Unknown Source)
[java] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
[java] at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
[java] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
[java] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
[java] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
[java] at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
BUILD FAILED
/u01/app/test/products/oracle/oiam/iam/iam/server/workflows/registration/registerworkflows-mp.xml:51: Java returned: 1
at org.apache.tools.ant.taskdefs.Java.execute(Java.java:108)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1307)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1191)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:218)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
The (partial) output for the OIM and SOA logs show more info about the error:
-> Log file: /u01/app/test/config/domains/iam_domain/mserver/iam_domain/servers/WLS_OIM1/logs/WLS_OIM1-diagnostic.log
[2012-10-19T15:39:57.247+11:00] [WLS_OIM1] [ERROR] [] [OIM Authentication Provider] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JdrKWszBp2OMyizW6G1GWDJc00000Z,0] oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password
[2012-10-19T15:39:58.242+11:00] [WLS_OIM1] [ERROR] [IAM-2010023] [oracle.iam.platform.workflowservice] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,0] [APP: oim#11.1.1.3.0] Tasklist mapping failed for workflowdefinition: default/SelfRegistrationApproval!1.0 due to Invalid Token Error in Verification Service.[[
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
-> Log file: /u01/app/test/config/domains/iam_domain/mserver/iam_domain/servers/WLS_OIM1/logs/WLS_OIM1.out
<Oct 19, 2012 3:39:57 PM EST> <Error> <OIM Authentication Provider> <BEA-000000> <oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password>
<Oct 19, 2012 3:39:57 PM EST> <Warning> <JNDI> <BEA-050006> <An attempt was made to look up versioned object "ejb.stateless.ClientLoginSessionService#oracle.iam.platformservice.api.ClientLoginSessionServiceRemote" from an external client or another application. This can potentially cause in-flight work of the application version not being tracked properly and thus being retired prematurely.>
ORABPEL-30503
Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: ORABPEL-30504
Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.workflow.verification.impl.VerificationService.hasPermission(VerificationService.java:3711)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
... 3 more
<Oct 19, 2012 3:39:58 PM EST> <Error> <oracle.iam.platform.workflowservice> <IAM-2010023> <Tasklist mapping failed for workflowdefinition: default/SelfRegistrationApproval!1.0 due to Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
>
-> Log file: /u01/app/test/config/domains/iam_domain/mserver/iam_domain/servers/WLS_IAM_SOA1/logs/WLS_IAM_SOA1-diagnostic.log
[2012-10-19T15:39:58.035+11:00] [WLS_IAM_SOA1] [ERROR] [] [OIM Authentication Provider] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29948] oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password
[2012-10-19T15:39:58.121+11:00] [WLS_IAM_SOA1] [ERROR] [] [OIM Authentication Provider] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic_idm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29950] [APP: soa-infra] oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password
[2012-10-19T15:39:58.217+11:00] [WLS_IAM_SOA1] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic_idm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29950] [APP: soa-infra] <.> hasPermission: error: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)
[2012-10-19T15:39:58.217+11:00] [WLS_IAM_SOA1] [ERROR] [] [oracle.soa.services.workflow.query] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic_idm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29950] [APP: soa-infra] <.> Internal error in Verification Service.[[
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
ORABPEL-30504
Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.workflow.verification.impl.VerificationService.hasPermission(VerificationService.java:3711)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextS(VerificationService.java:916)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:898)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:852)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:692)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.security.AccessControlException: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:436)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
... 3 more
[2012-10-19T15:39:58.224+11:00] [WLS_IAM_SOA1] [ERROR] [] [oracle.soa.services.workflow.verification] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic_idm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29950] [APP: soa-infra] <.> getContext: error: Internal error in Verification Service.[[
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
[2012-10-19T15:39:58.225+11:00] [WLS_IAM_SOA1] [ERROR] [] [oracle.soa.services.workflow.query] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic_idm] [ecid: aa237de71e3bd332:5124202d:13a773e1e57:-8000-0000000000001525,1:29950] [APP: soa-infra] <.> Invalid Token Error in Verification Service.[[
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
ORABPEL-30503
Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:903)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:852)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:692)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: ORABPEL-30504
Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.workflow.verification.impl.VerificationService.hasPermission(VerificationService.java:3711)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextS(VerificationService.java:916)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:898)
... 70 more
Caused by: java.security.AccessControlException: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
... 3 more
-> Log file: /u01/app/test/config/domains/iam_domain/mserver/iam_domain/servers/WLS_IAM_SOA1/logs/WLS_IAM_SOA1.out
<Oct 19, 2012 3:39:58 PM EST> <Error> <OIM Authentication Provider> <BEA-000000> <oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password>
<Oct 19, 2012 3:39:58 PM EST> <Error> <OIM Authentication Provider> <BEA-000000> <oracle.iam.platform.auth.providers.wls.OIMSignatureLoginModule login() Invalid Input username/password>
<Oct 19, 2012 3:39:58 PM EST> <Error> <oracle.soa.services.workflow.verification> <BEA-000000> <<.> hasPermission: error: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)>
<Oct 19, 2012 3:39:58 PM EST> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
ORABPEL-30504
Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
at oracle.bpel.services.workflow.verification.impl.VerificationService.hasPermission(VerificationService.java:3711)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextS(VerificationService.java:916)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: java.security.AccessControlException: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:374)
at java.security.AccessController.checkPermission(AccessController.java:546)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:436)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Oct 19, 2012 3:39:58 PM EST> <Error> <oracle.soa.services.workflow.verification> <BEA-000000> <<.> getContext: error: Internal error in Verification Service.
Internal error in Verification Service for user weblogic_idm. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
>
<Oct 19, 2012 3:39:58 PM EST> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
ORABPEL-30503
Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:903)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:852)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:692)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
From these logs, it seems that the user "weblogic_idm" either has an incorrect password set or does not have permission. I am still trying to work it out....any input would be much appreciated.
regards,
EvangeloThanks Asif!!
Steps mentioned in the meta link note were already taken care but the issue still exists.
Once we've added our custom page functions to the UMX_REG_UI_PERMS permission set in order to grant access to GUEST and GLOBAL users,the login issue was gone.
But when the go button in first page is clicked,it is again asking for credentials.
Do we need to do take care of any other setups/grants for this?
Please suggest!!
Thanks,
Siva -
External Candidate Registration - ERecruitment
Hi Team,
We have an issue in External Candidate registration process. After, the external candidate registration got completed, the user id to be created in the backend is not happening.
Thus, the candidate is not able to login with the user id he has provided while registration.
But the details are available in the Talent Pool regarding the candidate.
Please through some light on how system actually creates an User in the backend when an external candidate registers.
Thanks in Advance.
SadharHi Siddharth,
I am also having an issue in case of external candidate registration and application.
We are also implementing E-Rec as standalone server. We have not yet integrated with 3rd party system. But our client wants integration with their company careers site. Before that I was trying to test the WD services through SICF.
As you mentioned above, I have done with the Service User creation and assigned the role for unregistered candidate also. Still i am facing the below error.
When i try testing the Candidate registration page I am getting the following error i am getting an Internal error in function module HRRCF_MDL_AWZD_IS_APPL_GROUP
When I tried testing the Application wizard, the system is throwing the following errors:
* Internal error in function module HRRCF_MDL_AWZD_IS_APPL_GROUP
* Internal error in function module HRRCF_MDL_AWZD_POSTHEADER_GET
* HRRCF_MDL_AWZD_POSTHEADER_GET does not exist
The publication period is over. You can no longer apply.
Can you please look into this and help me on this.
It would be great pleasure if you give me some inputs.
Thank you.
Sekhar. -
Any issues with Photoshop CC & OS X Yosemite latest GM candidate?
I'm trying to prepare for Yosemite, as it may release later today or within the next week or so. Has anyone had any compatibility issues with the latest version of Photoshop CC and the latest Yosemite GM candidate? I have to research my third-party plugins for compatibility issues as well.
GautamBahl wrote:
Hi Foo Fighters,
Adobe is currently working with Apple to test interoperability with current Adobe products and will share any discovered issues when the OS is officially released.
Please refer to below article.
http://helpx.adobe.com/x-productkb/global/creative-cloud-apps-yosemite.html
Thank you for posting on Adobe Forums.
OS X Yosemite is now officially released, so will you please share those discovered issues? -
This is about issues with the approval of product registration.
Hi.
This is about issues with the approval of product registration.
In the absence of category for my problem dealing with Office 2007, I had to choose one of the enlightened choice categories. My proglem. Office 2007 is all well installed and functioning satisfactorily, except Picture Manager section. Every time I choose the
display of an image through Microsoft Picture Manager, I asked about registration. Several times I answered yes, and license code, implementation of tracing the proceeds smoothly. The problem is that by next preliminary to display images with Picture Manager
and it does not hsuker that I am registered and authenticated user.
What to do and what can I check out?
In advance thank you.Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Issues with iCloud registration
Hi I'm having an issue with Icloud on my mac and iphone. I have tried setting it up more than once, but I never seem to receive the confirmation email. It doesn't go to my spam account, my email is accurate and apple is not blocked. Anyone else having this issue?
Fromsouth, I think you have misinterpret what i'm trying to say.
First of all, thanks for your help and advice.
I know that I can used my old ID in the settings for purchases, however I am using icloud.com for all of my mails, calendar etc. however I do not want to change my email address as I have changed it once from Hotmail.
You mentioned that it is stupid just to have an icloud.com address. If Microsft and Google can do it, i'm sure apple can. If I forget my Microsoft password I get them to send the reset password to my phone or I used my computer or any other authorised device to reset my password.
Don't get me wrong as I am a big fan of apple, all i'm missing from the apple range is a Mac. I truly do love the apple approach and I love my iGadgets. However, I would love to have the option of just having an apple account as I do not want or need a microsft or Google account. In fact, i'm happy to pay the premium to have extra iCloud storage....
And you are right, iCloud is an excellent service, one that I have come to rely on. -
ERecruitment external candidate registration pages goes Blank after SPS7
HI All ,
We have recently upgraded our system from NW 701 SPS3 to SPS7 .
Information :
Our eRecruitment setup is , External candidates will login through a
different server and we have eRecruiting integrated with the ERP but with
the frontend for the External Candidate on a different
server.
We have checked the SICF nodes (active)and Trex working fine , however when a
candidate registration page or job search is opened the page remains
blank .
The logs in SM21 are as below when we tried to reproduce the same .
RCF_UNREGSER R2 G HTTP/RFC session has been deleted following timeout
Can you please guide us on this .
Regards
RahulHi all ,
I myself resolved the issue thanks
Regards
Rahul Shady -
UCCX 10.5 - Issue with triggers
Dear all,
We have had a pretty bad issue with our UCCX 10.5, for a reason unknown the CTI Points that link our UCCX with CUCM were all unregistered in CUCM (10.5).
I tracked down the issue that it could have had something to do with IPv6 and fixing the IPv4 in the Common Device Configuration op the CTI Port. For some reason i wasn't able to change this manually because CUCM would complain about the naming (UCCX_7000), it seemed that the underscore was not allowed.
I decided to remove the Call Control Group under UCCX and make a new one, when i did remove it. I rebooted the UCCX cluster (2 servers) and all of my triggers are gone, i was able to add the CTI points and get them registered, but now the applications in UCCX have no trigger. Is there a fast way to assign the triggers or is it a manual process (193 applications).
We did upgrade this UCCX once and we still have the older version in OS admin, can it work that i change versions back to 9.X and get my configuration back and then perform a new upgrade to 10.5?
Oh yes it was also a very bad moment to find out that the backup wasn't running properly since someone had messed with the SFTP server and forgot to mention :(
Could someone help me outyou need to add them manually.
Regarding CTI Route point registration with CUCM, let first explain how the communication goes on between them.
UCCX downloads the JTAPI client from CUCM, CCX Engine (RmCm and CM Telephony subsystems) controls JTAPI client, while CTIManager (JTAPI Provider) controls the server side. Agents' phones should be associated with RmCm user, while both CTI ports and Route Points should be associated with the JTAPI user (if it's HA deployment, then there will two JTAPI users; JTAPI_1 controls CTI RPs and CTI ports of the 1st server and JTAPI_2 conrols CTI RPs and CTI ports of the 2nd server).
if the CTI RP appears as Unregistered, then it should be associated correctly with JTAPI user, Usually I start with analyzing JTAPI logs from UCCX side especially if my customer wants root cause analysis.
Thank you,
Shadi -
E-Recruiting - Candidate registration
while testing the candidate registration servce (txn sicf) - after entering the details to register as an external candidate, upon saving i get what seems to be an error message - a red dot with an exclamiation mark and the numbers - " I:00:279 "
Has anyone come across this before while testing a servce in e-recruiting?Hi,
Please read carfelly note 1301479 and apply it in your system. Hopefully it will solve your issue.
Kind Regards
Christine -
Issues with iMessage when switching data carrier (wifi - cellular)
So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...
Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W. -
Issue with LPCOR on CME 10.5
Dear All,
I am facing issues with LPCOR configuration on CME 10.5. For International calls the Authentication Prompts triggers some times and some times doen not.
Also when a local call is dialed the Authentication Prompt is triggered some times.Below is the config and debug logs. Need your help to resolve this.
voice lpcor enable
voice lpcor custom
group 10 endusers
group 11 pstn
voice lpcor policy endusers
service fac
accept endusers fac
accept pstn fac
voice lpcor policy pstn
service fac
accept endusers fac
accept pstn fac
application
package auth
param passwd-prompt flash:enter_pin.au
param max-retries 0
param abort-digit *
param term-digit #
param user-prompt flash:enter_account.au
param passwd 12345
param max-digits 32
interface GigabitEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.25.76.1 255.255.255.0
interface GigabitEthernet0/1.201
encapsulation dot1Q 201
ip address 10.25.77.1 255.255.255.0
voice-port 0/0/0
lpcor outgoing pstn
trunk-group ALL_FXO 1
supervisory disconnect dualtone mid-call
supervisory custom-cptone 2n-gsm
no battery-reversal
input gain -6
output attenuation -3
cptone SA
timeouts call-disconnect 1
timeouts wait-release 1
timing sup-disconnect 50
connection plar 5040
caller-id enable
cable-detect
dial-peer cor custom
name local
name longdistance
name 911
name Internal
name fac-int
name user-fac
dial-peer cor list local
member local
dial-peer cor list call-local
member local
dial-peer cor list call-longdistance
member longdistance
dial-peer cor list user1
member local
member 911
dial-peer cor list user2
member local
member longdistance
member 911
member user-fac
dial-peer cor list user3
member 911
dial-peer cor list call-911
member 911
dial-peer cor list call-internal
member Internal
dial-peer cor list fac-int
member local
member 911
member fac-int
dial-peer cor list user-fac
member user-fac
dial-peer voice 96 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 9[2-6]......
forward-digits 7
dial-peer voice 901 pots
trunkgroup ALL_FXO
corlist outgoing call-911
destination-pattern 901[2-4,6-8].......
forward-digits 10
dial-peer voice 800 pots
trunkgroup ALL_FXO
destination-pattern 9800T
prefix 800
dial-peer voice 900 pots
destination-pattern 9T
port 0/0/3
prefix 9
dial-peer voice 11 pots
destination-pattern 901........
port 0/0/3
forward-digits 10
dial-peer voice 9051 pots
trunkgroup ALL_FXO
corlist outgoing call-local
destination-pattern 905........
forward-digits 10
dial-peer voice 19 pots
trunkgroup ALL_FXO
corlist outgoing fac-int
destination-pattern 900T
translate-outgoing called 1
forward-digits all
dial-peer voice 20 voip
description International calling
service clid_authen_collect
destination-pattern 900T
lpcor outgoing pstn
session target ipv4:10.25.76.1
incoming called-number 9T
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
ephone-dn 1
number 4121
name John
corlist incoming fac-int
ephone 1
lpcor type local
lpcor incoming endusers
mac-address E0D1.730A.21DE
ephone-template 2
type 7942
button 1:1
voice register dn 33
number 4163
call-forward b2bua busy 5000
call-forward b2bua noan 5000 timeout 20
call-forward b2bua unregistered 5000
allow watch
name Joseph
mwi
voice register pool 33
busy-trigger-per-button 4
id mac BC67.1C31.C8AA
type 7821
number 1 dn 33
cor incoming fac-int 1 4163
dtmf-relay rtp-nte
codec g711ulaw
transfer max-length 4
Debug Logs
DAMAC-CME-ANOUD#DEBUg VOIce lpcor all
voip lpcor all debugging is on
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#term
DAMAC-CME-ANOUD#terminal i
DAMAC-CME-ANOUD#terminal i
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId F692C420E06611E4BB0CE7FDC5486EA5, SetupTime 16:22:35.615 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:22:39.825 UTC Sun Apr 12 2015, DisconnectTime 16:22:39.825 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:35.609,cgn:4130,cdn:,frs:0,fid:2599,fcid:F692C420E06611E4BB0CE7FDC5486EA5,legID:284C,bguid:F692C420E06611E4BB0CE7FDC5486EA5mon
DAMAC-CME-ANOUD#terminal imon
^
% Invalid input detected at '^' marker.
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers
Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#show debug
VOIP LPCOR:
debug voip lpcor error call is ON (filter is OFF)
debug voip lpcor error call informational is ON (filter is OFF)
debug voip lpcor error software is ON
debug voip lpcor error software informational is ON
debug voip lpcor detail is ON (filter is OFF)
debug voip lpcor function is ON (filter is OFF)
debug voip lpcor inout is ON (filter is OFF)
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:44.089 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.009 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.889 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 1038, ReceiveBytes 166080
Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:44.093,cgn:4130,cdn:,frs:0,fid:2600,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284D,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:57.795 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:02.015 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.905 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 1038, TransmitBytes 174384, ReceivePackets 1043, ReceiveBytes 166880
Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:57.785,cgn:4130,cdn:0097150107659,frs:0,fid:2601,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284E,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers
Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
lpcor endusers index 10
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#un all
All possible debugging has been turned off
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#
DAMAC-CME-ANOUD#!ok just send me these logs
DAMAC-CME-ANOUD#!i have to move from here
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:25.323 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.393 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.153 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 930, ReceiveBytes 148800
Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:Tnow
DAMAC-CME-ANOUD#\WC,ft:04/12/2015 16:23:25.321,cgn:4130,cdn:,frs:0,fid:2602,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2850,bguid:14343755E06711E4BB16E7FDC5486EA5
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:39.169 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10 , DisconnectText normal call clearing (16), ConnectTime 16:23:43.389 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.169 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 930, TransmitBytes 156240, ReceivePackets 937, ReceiveBytes 149920
Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:23:39.169,cgn:4130,cdn:0097150107659,frs:0,fid:2603,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2851,bguid:14343755E06711E4BB16E7FDC5486EA5We have come across this issue today in 10.9.5 (so affects 10.9.4 as well) but it was occurring in Sydney as well with a client and for me in Melbourne.
Maybe you are looking for
-
Disk Repair Utility Full Disk Error
Today, my MBP froze, as in it no longer responded to keypresses or moving the mouse, so I held the power button until it powered off. Whenever I try to power it back on, it comes up with the apple logo on a gray screen, and a progress bar briefly app
-
Is iCloud working at all for anybody right now?
Is iCloud working at all for anybody right now?
-
Hi does anyone know how to take a string from a textfield and display the data of the textfield on another page. thanks in advance
-
Iconix icons not showing with this new version of Firefox. Why?
On previous version my emails were checked by Iconix and showed an Icon for reckognised genuine emails from ligitemate sources. On this new Firefox version this seems to have been hidden or is not happening.
-
Auto P.O. Convert with out info records
I have the following requirements: 1) Create Purchasing requisition without purchasing info record. 2). Be able to auto convert to a PO. When I try and enter the Fixed vendor manually it gives me a message "Info record for vendor & and material & doe