It takes 5 to 8 minutes for photoshop cc to start
when starting photoshop cc it take 5 to 8 minutes for the program to start. If you look under forced quit on the mac it says the program is not responding, and then 5 minutes later it starts.
Does anybody have any suggestions as to how to sort this out?
http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
Similar Messages
-
I was using WildBlue Satellite service for my internet connection. I recently changed to a Broadband connection. Since the change my computer is slow. I click on the mail application icon (or any other icon) and then wait and wait for it to open. It used to be instantanious. While I am editing in Pages or Numbers I will type almost an entire sentence before the characters actually appear on the screen. This happens when I am typing an email as well. I often get the pinwheel and cannot do anything until the system catches up with me. It doesn't make sense that the broadband connection has anything to do with this. My internet upload and download speeds are great. It is mostly the internal apps that do not require an internet connection. Any ideas?
I've got activity monitor open and nothing is popping out at me. But I will check it the next time I get the pinwheel.
No software was installed - either related to the new broadband connection or otherwise. I checked for updates to the OS (nothing).
I tried turning Airport off and at first it seemed better and I also did not have the ethernet connected. I also did an SMS reset? No change.
Good suggestions though.
Oh, I am running Parallels6. I've shut windows down, performed a clean disk and system clean with Trend Micro.
Message was edited by: christinefrommountainair -
My iPad mini freezes every 2 minutes and it takes another 2 minutes for it to respond again.
My iPad mini freezes every 2 minutes and it takes another 2 minutes for it to respond again, after it freezes the screen goes black and after 2 minutes the pass code screen comes up then the cycle begins again. My iPad is fully charged and I have closed all of my apps. Please help.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Revision: 19362
Revision: 19362
Author: [email protected]
Date: 2010-12-14 08:16:35 -0800 (Tue, 14 Dec 2010)
Log Message:
Increase the tests' timeout since it takes about 17 sec for JMS server to start up on some app servers.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/uuidgeneration/CustomUUIDGenerat orTest/simpleJMSMessagingTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/uuidgeneration/DuplicateUUIDTest /DuplicateUUIDTest1.mxmlcheck the server log;
/app/oracle/product/fwm11g/user_projects/domains/fwm_domain/servers/AdminServer/logs/AdminServer.log
you can launch the console and see if it is running; http://<server>:<port>/console -
Our customer have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
I have no idea about the configuration of machine to which printer is hooked up but it is running Windows for sure.
This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS on which they have installed the printer connected to earlier machine using local printer driver installation
with local TCP/IP port being selected during installation. Installation goes well, printer gets installed successfully and shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
the same in all cases. earlier when they were using 32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows 7 64
bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.
Thanks in Advance.Hi,
Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
clear all printer cache.
Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
Karen Hu
TechNet Community Support -
Isquint takes over 300 minutes for one file...
Ok I know its apple discussions but I cant find ANY support for iSquint. Does anybody use it here and know why it takes anything for half an hour to 300 or 400 minutes for one file?
There is no real pattern, it seems to be that if I add more than one file it's almost certain to take ages, but a single movie set to convert could take 30 minutes or 300..
The movies are simple mp4's, dvd's encoded with handbrake. between 500mb and 1.2GB in size. No pattern to file sizes taking a specific length.
I literally just thought though, some of these files have already been converted from avi to mp4 using iSquint, and I haven't checked for a pattern to see if these ones take ages and others do not.
Could this be it or does anyone know what might be causing it?
I'm running a 24" iMac with 2.8Ghz processor and 2GB RAM
RegardsIn handbrake there is an option to encode it to add an iPod compatibility. However as far as iSquint goes, I gave up on it after i began to run out of space on my 'pod. I would suggest to reinstall the application.
Sorry i cant be more of a help,
Kevin -
Suddenly, my gmail emails which have always been set to automatically forward to my icloud account on my, laptop (especially slow now), and iPad, are now taking several minutes for them to forward.
Why is this?
I did recently update to Yosemite. Could this be why? I have never had this issue.
Thanks!Just to rule out Gmail, I have been having the exact same issue from a private-domain email account. Like you, I recently upgraded to Yosemite and I'd say the timeframe roughly corresponds to that. I've seen delays of as much as three or four hours, in fact. Crazy.
-
Does Backing Up during sync take 20-30 minutes for everyone else?
Since the 2.0 upgrade, syncing takes one minute less than eternity. Well okay, not that long, but at least 1000% longer than it did before. The longest step is "Backup up iPod" which just crawls.
My syncs, which used to take less than a minute when I wasn't copying new music or shows over, now take at least 5 minutes, and have taken as long as 30 minutes.
Certainly this isn't normal? Anyone else seeing incredibly long sync time?So I tried deleting my iTouch 2.0 backup file (first manually, by going into the\Application Data\Apple Computer\MobileSync\Backup folder, and second via the iTunes:Preferences:Syncing dialog) - this makes no difference. Sync now apparently always Backs Up in the Windows environment as part of the Syncing process. Since Back Up and Sync are separate context-menu items for the iPod, shouldn't they be independent operations.
Also, it's not good backup policy to have exactly one backup (of your iPod 30 seconds ago) - has this change been implemented because of instability in the iTouch 2.0 release? (as a defense in case your iPod self-destructs during the Sync process) - if so, perhaps the backup will be removed / sped up in the first patch release.
Does the Mac environment show the same behavior change? -
Why does it take over ten minutes for email to get through for my request for a signature
Why isn't this program faster? It's been over 20 minutes emailing a test form, to myself, to see how quick this is? Is this normal? Not what I was looking for in a software program
Have you tried to eliminate everything extraneous. In other words, do you experience the same delays with a simple Java program (no lookups, JNDI) that loads the drivermanager and creates a connection.
Do you have access to a traciong JVM or some program that captures run-time execution timing information? Even without the source, this will tell you the specific class::methos where time is spent so you can better determine where the delay is ocurring. -
see above
== This happened ==
Every time Firefox opened
== since downloading Firefox at an alternative to Internet ExplorerHello Howard.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. -
Slow boot, wrong screen & touchpad not connection correctly
So are they going to do anything with all of this or just act like Microsoft & hope it'll get better by its-self? I'm pretty disappointed and wish I'd stayed with Mavericks. Is there anyway to go back?
-
I'm writing this on ie, which I HATE, because since I installed F4, it will not start up in a reasonable time. I did all the basic troubleshooting, uninstalled and re-installed it, checked the options, etc but nothing works. Everything elso on my computer works instantly, except F4. What's up with that and am I going to have to go back to using the hated ie all the time?
It sounds to me like the installation didn't perform correctly.
What I suggest you do is to go to Add/Remove Programs and uninstall it, but don't checkmark the option to remove your bookmarks, customizations etc.
Before you do that though, go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0] and download a fresh installation file.
After you uninstall the existing installation, reboot.
It's also wise to disable your AV before installing again. If you've got AVG, this is particularly difficult because it doesn't have an Exit option. Instead, you have to open MSCONFIG and remove the checkmark from '''AVG Watchdog '''which disables everything. Any changes to MSCONFIG requires a reboot I regret to say. -
Anyone having problems with iTunes 10.5.2?
I'm having long times to start a track and then over 1 second to start playing again whenever I skip to another part of the track.Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no. -
Is there a way to remove all of my contacts from the iCloud? My phone has my correct contacts list. When I sync with iCloud it pulls down 50+ contacts that I do not want. I went to iCloud to remove the unwanted contacts and it takes nearly 1 minute for each one. Another soluntion would be to make my phone contacts override my iCloud contacts?
Go to your Contacts on your Mac - if more than one pick the most accurate; delete any contacts you don't want. Select all the contacts, and from the File menu choose 'Export...'>'Export vCard'. Save the resultant file safely: it will be your 'master' list.
Now delete all the contacts from whichever device has the most in it. Sync with iCloud. If necessary repeat with different Macs. The result should be that the deletions sync to iCloud and in the end you finish up with empty Contacts lists everywhere.
Now you can import your saved file to one of your Macs. Make sure you import it under 'iCloud' not 'On My Mac'. Then it should propagate iCloud and any other devices. Keep the saved file at least until you are satisfied that all is in order. -
Yosemite takes about 2 minutes to shut down
Hey everyone, I just got done installing OS Yosemite last night, and now it takes over two minutes for my MacBook Pro 15" to power down/restart. How do I fix it? Or do I have to just deal with it?
judithfromrvc wrote:
Macintosh HD:
Capacity: 249.72 GB (249,715,376,128 bytes)
Available: 176.64 GB (176,635,330,560 bytes)
Is the bolded text the correct info? Many thanks for any help, J
<Edited By Host>
Yes it is. Thank you very much. You appear to have adaquate hard drive space available. Now try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Maybe you are looking for
-
Possible to make line corner not jagged, but not round?
If you look at the attached image, you can the upper line is very jagged. Is it possible to retain the object's shape but make that point, less pointy?
-
Can't install ios 7.1 on my iphone 5
Can't install the above, I get a message after it's downloaded saying update failed, tried turning it off and trying again and via iTunes and still nothing, any ideals?
-
Added photo to iphoto but doesn't show up in media browser?
I have added some photos to an event in iphoto...then they do not show in media browser in pages...any clue why...has worked quite a few times before
-
Is There Any FM To Find Opening Stock in Given Date
-
How to sort internal tables of unknown structure?
Hello Itab is an internal table of unknown structure with field F1 and many other. How to sort this table by field F1 is the structure is unknown? SORT ITAB by F1 ascending. Thanks