Item Category - Completion Rule.

Hi Sap Gurus,
I have created a sales order for item qty 100 nos,created delivery only
for 50 nos(one delivery) and when I want to refer the sales do and created del for the remaining 50 it should say that sales order is complete for which I have changed
the completion field in item category as " complete after first reference" but still I am able to create del for the remaining 50 also.
Please let me know if any other changes r to be made.
Thanx In Advance
Narender.N

Hi,
Check in VOV7 the complition rule for Item Category
Select the option as per your requirement
ComRl Short text
 Not relevant for completion
A Item is completed with the first reference
B Item is completed after full quantity has been referenced
C Item is completed after the target qty is fully referenced
D Item is referenced via contract release
E Item is completed after full target value is referenced
Reward points if useful
Regards,
Amrish Purohit

Similar Messages

Item Category Completion rule and Copy Control for contract reference

Hi
We are creating sales document wrt contract. The item category completion rule for item category WVN is C i.e. item is completed after target quantity is fully referenced.
We dont want to change this but we want that even if the target quantity is fully referenced one particular type of sales document should still be allowed to be created with reference to this contract.
Please guide how can I achieve this.
Thank You
Brajendra Shrivastava

Hi
Is it possible to remove the item category completion rule and then restrict one particular document type or item category for only one time reference . In other words to apply completion rule at document type or tiem category level.

What is Completion Rule Setting for Item Category KBN?

Hi,
In the standard SAP configuration, what is the setting of Completion Rule for
Item Category KBN? In our system, currently it's set to "B".
Thanks!

Dear Mari
In Standard, item category KBN will have "A" as billing relevance.
"A" Indicates what the basis for billing should be.
Billing is based on the outbound delivery. Billing status is only updated in the outbound delivery.
For information, in standard, both KBN and KEN item categories will have "A" as Billing Relevance and in KEN, "W" will be maintained in the field "Special Stock".
Thanks
G. Lakshmipathi

Completion rule on item categories

Hi all,
We have a scenario where we would like create quotations with reference to existing open quotations. This is possible when we create a quotation as a follow up from a quotation. However, when we create the new quotation then the referenced quotation gets completed automatically. This we do not want. We want the referenced quotation to remain in status open. How can we achieve this. In R/3 it can be done in customizing by leaving the completion rule field on item categories blank. But this field does not exist in CRM item category customizing. What to do?
Thanks in advance for your input.
Best regards,
Anders

Hi Prakash,
I am on CRM 4.0.
Regards,
Anders

Update sales orders status after changing item completion rule

Hello!
I've just changed the item completion rule of a given sales document item (from 'B' to blank). But we have several old orders, which have deliveries created with reference, with some fields still open (due to the 'no reference' status at the item level). The orders created after the new condiguration are ok.
So, is there any way I can update the status of those old orders? Already tried the report SDVBUK00, but did not work out.
Any ideas are welcome.
Thanks.
Adriano Cardoso

Hi,
check if oss note 1472007 helps.
Regards,
JM

Delevey completion indicator for item category D

Hi!
When a PO is created with item category D (service), the delivery completion Indicator is not seen in the PO.
But, if I craete PO for same document type with item category other than D, I was able to put the delivery completion
indicator in the Delivery tab in item details. Now, how do I get the delivery completion indicator for Item Category D(Service).
pls help me.
Regards,
Vaibhav

hello,
Go to
SPRO-->MM->Purchase order->Purchasing -> Purchase order-> Define screen layout at Document level
Select the field selection as PT9F and tick the Delivery Compl Indicator at two places .
The system will now show you the indicator when you create a PO with item cat as D.
this should work.
Cheers... Ganesh S.

Item Category- Urgent.

How do i configure item category TATX to enable use of text at line item level.
Please give clear step by step instructions.
Thank you.

Hello,
go into the following menu path in hte customizing:
> SPRO
   > Sales and Distribution
      > Sales
         > Sales Document
            > Sales Document Item
               > Define Item Category
Here you can select the item type TATX and can maintain it as follow:
Item Type          =   B
Completion Rule
Special Stock
Billing Relevance = A
Billing Plan Type
Billing Block
Pricing
Statistical value
Revenue Recognition
Delimit. Start Date
Item rel. for Delivery = X
I hope that the information are helpful.
Regards
Claudia

Check Incompletion Rule and Completion Rule on Sales Document

Hii Guy...
where can i check Incompletion Rule and Completion Rule on Sales Document type the backgroud table of Sales order and item category ?

Hi friend,
Incompletion procedure you can check in the OVA2 transaction code.
There you can find the incompletion procedre for the sales document header as well as item.
Path: IMG-->SALES & DISTRIBTION->BASIC FUNCTIONS---> INCOMPLETION PROCEDURE--->
There you can find all the settings of the Incompletion procedure.
If you want to check the incompletion procedre in the document, then goto EDIT---INCOMPLETION LOG
FOR item click on the item and goto EDIT---INCOMPLETION LOG
regards,
santosh

Unable to change the item category in existing Scheduling Agreement

HI,
I have a schedule agreement where there are already list of line items but saved without the appropriate item category field in all of the line items. Now I see that the Item category column is greyed out & unable to edit or change thru ME32 T.code.
I am already aware that deleting the item codes & adding again with resolve the issue. But when try to delete, those codes shows that they have GR & PO not completed one.
My question is :
Is there a way to edit/change the Item category field without deleting the item?
Whethere is it possible to do it in bulk update for group of items in SA?
If it is possible, pls provide how to do it with steps.
Kindly advice.
Thanks. in advance!
-Umesh

Please try using MASS tcode with object BUS2013
or MEMASSSA
Its a direct table update where you can select the Table Item and Field Item category and input the document number to change the value os item category and try with one sample data then do it in mass.
Before cahngin the item categry Please make sure all the dependancies are met then nly the system will allow you to save.
Refer for Mass upload function it is common for all
[Mass update|http://www.sapkshare.com/user/image/mass-maintenance---mm17.pdf]
Edited by: Karthik on Jul 29, 2011 2:44 PM

Error in CRM WEB UI : Item category could not be determined.

Hi,
I am trying to create Service Confirmation. I got an error sayin for line item 20: Item category could not be determined. Conversion Factors are invalid.
Can you please tell me, when such type of error comes?
Do we need to check any configuration for this?
Thanks,
Sandeep

Hi Sandeep,
Such type of errors generally comes when the customizations are not maintained properly in the system. Every One Order transaction has a Transaction Type and one or more Item Categories associated to it. And in the Item Category determination you need to associate all the Item Categories and the Transaction Type.
In this case, it looks like the Item Category is not properly configured. And also the Item Category Determination is not happening properly.
The best way to trouble shoot this kind of error is to get in touch with the Functional Consultant who has configured the Transaction. Alternatively, you cal also have a look at the standard transactions which are delivered by SAP to have a feel of all the places where there might be potential errors.
You can check this in the IMG Customization. Refer to this link for a complete detail: [Business Transaction|http://help.sap.com/saphelp_crm70/helpdata/en/92/8269126d1547578aab640f097de32c/frameset.htm]
Hope this helps.
Thanks,
Samantak.

Credit Check while creation of Sales Order for Item Category Purchase Req

Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
Rajanikanth

Hi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth

Item category TAK - free of charge

Hello!
We use item category TAK, but now face the request to send TAK items free of charge.
Normally i would use order type FD, but this has no assigned item category for "0001 make-to-order"
No item category available (Table T184 FD 0001 )
Now i wonder how to continue correctly.
In the order there's TANN as a free of charge variant for TAN
in order type FD, there's item category KLN (only for "normal lines"!?)
Do i need to set up a "Z"- item category or is there any standard that i don't find / understand!?
Thanks a lot in advance for your help!
Regards
Markus

Hello,
you shoud create a Z* item category as copy of the TAK, but without billing relevance (like KLN).
On top of that, all the customizing item-level relevant, should be the proper mix of both the items used as reference (i.e. the incompletion rule of your Z* item should have the NETWR field in the incompletion procedure).
Best regards,
Andrea

Change item category in delivery order

Hi everyone
Issue: Can not change item category in delivery order.
Phenomenon:
1:Create purchase order and receive item based on it. complete invoice verification.
2:Use MIGO to create return delivery based on material document that is created during above process.
3:Based on system settings, (Sales org, ship-to party etc), outbound delivery is automatically created in background.
4:Try to change item category which is already determined during delivery order creation, but it is grayed out.
Can we change item category in this situation?
I have checked thread "Number of attempts to change Item Category
This looks same issue but I still do not know how to control item category in delivery order.
In material type, is there any place I can configure to allow user to change item category
in delivery order?
Please advise.
Satoru

Hi,
Check whether this link would help you,
[Change item category in delivery|Change item category in delivery]
It looks you need to use user exit: MV50AFZ1 to acheive your requirement.
Regards,

Issue while changing Item Category during Sales Order Creation

Hi,
Requirement:
Requirement is to change the item category of Sales Order item while creating the sales order.
Rule is: If item category is IRAT then it should be changed to IRLN.
For this, I am using the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE" available in the include MV45AFZZ.
Issue:
Using the above mentioned exit, Item category is getting changed to the desired value in the created sales order BUT value of Billing Status (VBUP-FKSAA) which is supposed to get changed is blank.
For example, Sales order is created from VA01 and item category is changed manually to the value mentioned above, then for the sales order created we have VBUP-FKSAA = 'A'. But when value of Item category is not changed manually and it is changed from the exit, then value of VBUP-FKSAA is blank.
I have to find a solution which would change the value of Billing Status according to the change in the value of Item Category.
Please suggest a relevant solution.
Thanks a lot for responding.
Abhinav.
Edited by: Abhinav Jain on Apr 9, 2010 6:47 PM

Hi Abhinav,
I have a simmilar problem. In my case I am changing Reason of Rejection in the user-exit, but net value is not getting updated. Did you solve your problem? Any other way to change a field of a sales order item?
Thanking you in advance,
Nisha

Shipping point determination based on item category

Dear
we have a requirment which needs to determine shipping point based on item category. anyone could share how to achieve that? I am familiar with sap standard shipping determination rule: shipping condition in sold-to-party MMD or shipping condition within sale document type + loading group + delivery plant. However those condtions wouldnt fullfill our needs. the items within a sales order are exactly same except item category, such as item 10 is TAN , item 20 is TAB item.I want the system get different shipping point for those two different item category.
any though would be appreciated and thank you,
best regards
peng. tang

As already suggested, you can consider going with differentiating the Loading Group in material master, so that via standard configuration itself, you can achieve the desired result. On the other hand, if this is not possible, then, you can try with USEREXIT_MOVE_FIELD_TO_LIPS in include MV50AFZ1
G. Lakshmipathi

Item Category - Completion Rule.

Similar Messages

Maybe you are looking for