Javaws  -Xclearcache   System Configuration error

I am running on windoze XA SP 2 with JDK 1.5.1_06. I am running on the system admin account but when I try to use the -Xclearcache option I get the error: below. In DOS I issue the command:
javaws -silent -Xnosplash -Xclearcache test.jnlp
An error occurred while launching/running the application.
Category: System Configuration
The current user does not have write access to the cache.
JNLPException[category: System Configuration : Exception: null : LaunchDesc: null ]
     at com.sun.javaws.Main.main(Unknown Source)

yes - this looks like a simple bug.
If you want to specify a particular jnlp file to uninstall use:
javaws -uninstall <jnlp-file-or-url>
to clear the cache completely,
javaws -XClearcache
or
javaws -uninstall
seem to do the same thing, but
javaws -Xclearcache either does nothing, or gets an error, depending on the other args.
/Andy

Similar Messages

  • EPM System Configurator  Error

    Hi,
    I am trying to open EPM System Configurator but getting error:
    "The Vital Product Data registry is in use by another installer. Please start this installer after the other installtion is complete."
    I am not installing the EPM system. It is already installed. I am just trying to open EPM System Configurator by Start--All Programs--EPM System--Foundation Services-- Start EPM System Configurator
    I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
    Please help me with this error.
    Thanks & Regards,
    Akshat

    Hi Srikanth,
    I am not running any othe installer. I tried restarting the system also but again I am getting the same error.
    Actually I am trying to integrate OBIEE with EPM workspace.
    I am following the below link:
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/general_10134.htm?bcsi_scan_6E125C62D30562F9=0&bcsi_scan_filename=general_10134.htm#BEHGEFEI
    I am facing the problem at step -- 11.5.3.6 Configuring the Web Server for EPM Workspace
    Regards,
    Akshat
    Edited by: user10943765 on Oct 1, 2010 10:57 PM

  • Managed system configuration error

    Dear Expert,
    While doing managed system configuration step-"Check Configuration"  for my solman (7.1)system itself, I am  getting attached error.
    Please Advice .
    Thanks
    Chander

    Dear Oliver ,
    I have downloaded the Patch 183 (SAPHOSTAGENT183_183-20005735.SAR).
    Refering below link for upgrade http://help.sap.com/saphelp_nw73ehp1/helpdata/en/39/a1f623bae74a2784f88282c8652070/content.htm
    But after uncaring of Patch 183 ,I am not getting below files in new patch level .
    sapstartsrv.exe
    saposcol.exe
    saphostctrl.exe
    saphostexec.exe
    According to link the last file will be used in upgrade
    saphostexec.exe -upgrade
    but this is not present in new patch level 183.
    Thanks
    Chander

  • MAnaged system configuration error in solution manager

    Hi,
    While doing managed system configuration getting the error, below versions are using.
    MDM 7.1 SP10  Import server  and Solution manager 7.1 SP10.
    Can anyone help me?.
    Regards
    Chandra

    Two cases you have
    1) Satellite system
    Re-install The DIA agent and give correct (port numbers )SLD details
    Once you re-install the DIA agent, run Rz70 from satellite system
    data will pull from satellite system to central SLD.
    2)Run SLD check from Solman system , check its successful or not
    Go to LMDB and check satellite system
    After re-Synchronize technical system from SLD 
    Thanks ,
    Rahul yedapally

  • Managed System Configuration Error for MDM 7.1 SP09

    Greetings, Needed your expert advise. We are getting an error while configuring our MDM Servers (Version 7.1.08.196) in Solution Manager. As suggested in SAP Note  1798643 , I have manually filled the required details and transferred through sldreg.exe to SLD. Now when i try to perform Managed System Configuration, it is throwing the below error. The definition of Technical System '~MDM' is not correct: '~MDM': No Path found in Installed Technical System 'SID~MDM~'. I'm not sure how to manually update the Install Path for our MDM Servers. Since, the data to LMDB is automatically supplied, I might not be able to manually edit anything. Could you please advise if there is any step to solve this issue. Thanks, Haseeb Ahmed.

    Dear ,
    Haseeb,
    I had the exact same problem with MDM managed system setup . I was on MDM 7.1 SP10.
    1940337 - RCA template for Solution Manager 7.10 SP10
    This note should resolve your problem. This note has the updated template for MDM.
    It did for mine
    Thanks
    Amit

  • Validate system configuration  error

    Doing install on linux RHEL AS4
    WHEN RAPIWIZ is oing validate system configuration test it fail on database connection with the following
    Database Availability
    command: su oracle -c "/mnt/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /u01/spacer12/db/tech_st/10.2.0/VIS_appsweb01.env APPS/APPS"
    riwTDBup.sh started at Wed Apr 23 04:39:47 EDT 2003
    Parameters passed are : /u01/spacer12/db/tech_st/10.2.0/VIS_appsweb01.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /u01/spacer12/db/tech_st/10.2.0
    ORACLE_SID : VIS
    TWO_TASK :
    PATH : /u01/spacer12/db/tech_st/10.2.0/perl/bin:/u01/spacer12/db/tech_st/10.2.0/bin:/usr/bin:/usr/sbin:/u01/spacer12/db/tech_st/10.2.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/mnt/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
    LD_LIBRARY_PATH : /u01/spacer12/db/tech_st/10.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/spacer12/db/tech_st/10.2.0/lib:/usr/dt/lib:/u01/spacer12/db/tech_st/10.2.0/ctx/lib
    Executable : /u01/spacer12/db/tech_st/10.2.0/bin/sqlplus
    riwTDBup.sh exiting with status 3
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su applmgr -c "/mnt/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /u01/spacer12/inst/apps/VIS_appsweb01/ora/10.1.2/VIS_appsweb01.env APPS/APPS"
    riwTDBup.sh started at Wed Apr 23 04:39:48 EDT 2003
    Parameters passed are : /u01/spacer12/inst/apps/VIS_appsweb01/ora/10.1.2/VIS_appsweb01.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /u01/spacer12/apps/tech_st/10.1.2
    ORACLE_SID :
    TWO_TASK : VIS
    PATH : /u01/spacer12/apps/tech_st/10.1.2/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/mnt/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
    LD_LIBRARY_PATH : /u01/spacer12/apps/tech_st/10.1.2/lib32:/u01/spacer12/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/spacer12/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/spacer12/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/spacer12/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads
    Executable : /u01/spacer12/apps/tech_st/10.1.2/bin/sqlplus
    riwTDBup.sh exiting with status 3
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 3

    should i create a applmgr useDepends whether you want to have multi-user installation or not.
    For multi-user installation, you need to create applmgr account (use the same command you use to create oracle user). To run Rapid Install, log in as root user and run Rapidwiz.
    For single-user installation, oracle account would be enough. To run Rapid Install, log in as oracle user and run Rapidwiz.
    For more details, check "Oracle® Applications Installation Guide: Using Rapid Install Release 12", "Create Operating System Accounts" section.
    http://download.oracle.com/docs/cd/B40089_07/current/acrobat/120oaig.pdf

  • Integrating 3 systems - Configuration Error

    Hi Experts,
    I have a scenario where I need to integrate 3 technical systems. i.e One Source System and Two Target Systems are there.
    The Mapping is defined under a common Software Component Version which has the other 3 SWCVs as dependents.
    I have used 1 Message Mapping, 1 Interface mapping, 2 Interface Determinations, 1 Sender Agreement, 1 Receiver Determination, 2 Receiver Agreements.
    Input Message -> Message A ( Target A ) and Message B ( Target B ). Ideally, Message A should go to Receiver Agreement A and then to Target A , and Message B should go to Receiver Agreement B and then tio Target B.
    But when I test the configuration, it is throwing an error at Receiver Agreement stating " No standard agreement found"
    XI is trying to send Message A and Message B to both the Targets and hence Message B fails at Target A and Message A fails at Target B.
    Kindly let me know what is the practical solution to this .
    Thanks and Regards,
    Krishna

    Hi Experts,
    Thanks for the valuable replies to this question...
    Actually my scenario was simplified by using 2 message mappings and 2 operation mappings...
    One of the receivers was an ABAP Proxy and another one was a File..
    So i reckon its not possible to club both under the same mapping...
    I used two different mappings, one for File to Proxy and another for File to File and 1 Rx Det, 2 Interface Det. 2 Rx Agreements...
    It is now working perfectly...
    Thanks again for your comments...
    Regards,
    Krishna

  • EPM System Configuration Error

    Hi, Gurus
    When am re-configuring EPM system, I got below error message.
    <Font color="Red">
    "The port number is already used by another application. Specify a port number that is not being used." </font>
    I want to delete the previously configured ports and applications. what is the best method to reconfigure the EPM system without uninstalling the software?
    Thanks for your help in advance.
    regards
    Sarilla

    The port number in use indicates something is actually running at currently at that port. Make sure you have all services stopped before reconfiguring, check task manager for any residual processes to kill, or reboot and make sure nothing is running.
    Nick

  • Syntax error in program CL_AC_METRIC_REPOSITORY=======CP When going to managed system configuration in solman 7.1

    Dear SAP Gurus,
    Good Morning.
    I'm getting error in managed system configuration in solman 7.1. Error is like
    The system preparation and Basic configuration in working fine, but when we are going to click the managed system configuration Error getting like this.
    Solution Manager  Version : 7.1
    SP Level  : SP5
    Thanks in Advance.
    Regrads,
    Kumar BN

    Hello Kumar,
    I would suggest moving this discussion to this space in SCN: http://scn.sap.com/community/it-management/alm/solution-manager
    That will help get you a quicker response.
    Thank you,
    Kristen

  • Cannot install itunes on computer says system configure

    Trying to install itunes on computer keeps comming up with system configure error please help

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Error while expoting system configuration

    Hi All,
    I am getting following exception while exporting command groups in system configuration. Please guide me to solve this problem.
    The configuration object has been added to the export package. ImportExportConfigException: Unexpected error when trying to add a set of configuration objects to the export. System error is "InvalidEntryException: Cannot add an already existing configuration object "configurable_[Administrator]_config://local/system/transport/Administrator_6275850%32%on%32%DDL-EPD%47%cm%47%ui%47%uicommand%47%Company_AppAnnouncementNewGroupSubCollection" to folder "plugin_[Administrator]_config://local/system/transport".". Inner exception is: InvalidEntryException: Cannot add an already existing configuration object "configurable_[Administrator]_config://local/system/transport/Administrator_6275850%32%on%32%servername%47%cm%47%ui%47%uicommand%47%Company_AppAnnouncementNewGroupSubCollection" to folder "plugin_[Administrator]_config://local/system/transport".
    Thanks,
    Venkatesh R

    Hi Venkatesh,
    System error is "InvalidEntryException: Cannot add an already existing configuration object .
    i think u r adding objects morethan 1 time in transport package. Check ur objects and upload to package.
    Surekha.

  • The system encountered error before Itunes could be configured

    Hi, i can't seem to get Itunes 8 to run. Each time after the installer is launched, it has an error message that says "The system encountered error before Itunes could be configured. Your systems has not been modified. To try this application at a later time, please run the installer again."
    I am using windows vista home premium and a iTouch
    I am running out of ideas
    thanks for your help!

    me too. except now i can't delete all the programs from my computer to reinstall not happy

  • Link SAP PI 7.3 to SolMan 7.1 - error during managed system configuration

    All,
    I installed my diagnostics agent twice with different options:
    - Direct P4 connection via Java EE Dispatcher Node with port 5xx04
    - P4 connection via SCS message server with port 81xx
    In both cases I get an error during the managed system configuration of SAP PI 7.3: Remote error : Connection to P4 port of managed system failed.
    I'm a bit confused with the step Enter System Parameters. In the Java parameters section, I can only enter port 39xx. if not, I get an error.
    Also, I marked and unmarked the option concerning the ABAP user store, but the error persists.
    Please advice.
    Thanks a lot.

    Hi Allam,
    I checked the KBA and I think now, I have the correct HTTP port.
    The error I now get is S:CL_DIAGSTP_MESSAGE:483
    When I take the next step, Configure Automatically, I get this error during the Byte Code Adapter Installation phase when I open the Java URL stated in the navigation column:
    DIAG_WILY_MSG:157:S - com.sap.smdagent.vmmanager.VMManagerP4Exception: com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException: Access is denied to SAP System sid: check the connection credentials.More details about the error in agent 'sappi' log file (SMDAgentApplication.X.log).; nested exception is:
    com.sap.engine.services.security.exceptions.BaseLoginException: Error during authentication. For more information see the remote server traces.
    Any idea?
    Thanks.

  • I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Configuration Check Error in Managed System Configuration

    Hi dear experts,
    I come across a problem as the screenshot shows blew:
    I check some relevant information, but no issues found:
    1.
    DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
    saphostexec running (pid = 7094)
    sapstartsrv running (pid = 7097)
    10:46:34 24.06.2014     LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
    saposcol running (pid = 7130)
    DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
    SAPSYSTEMNAME = SAP
    SAPSYSTEM = 99
    service/porttypes = SAPHostControl SAPOscol SAPCCMS
    DIR_LIBRARY = /usr/sap/hostctrl/exe
    DIR_EXECUTABLE = /usr/sap/hostctrl/exe
    DIR_PROFILE = /usr/sap/hostctrl/exe
    DIR_GLOBAL = /usr/sap/hostctrl/exe
    DIR_INSTANCE = /usr/sap/hostctrl/exe
    DIR_HOME = /usr/sap/hostctrl/work
    service/admin_users = daaadm
    service/logfile_000 = /tmp/s
    service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
    service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
    service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
    And the version of hostagent is up-to-date.
    2.The URL
    - http://<SMDhost>:1128/SAPOscol/?wsdl
    - http://<SMDhost>:1128/SAPHostControl/?wsdl
    can be accessed.
    3.The step 3 in managed systems configuration is executed successfully.
    4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
    5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
    Now I have no idea how to proceed, please give me some advice, thank you in advance.
    Best Regards,
    Pany Pan

    Hi Pany
    Kindly check the below two sapnote
    1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
    1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
    Moreover , you need to check/verify/maintain the parameter in configtool
    ThreadManager -> MaxThreadCount
    Total number of Diagnostics Agents * 2 + 50
    1250
    ThreadManager -> InitialThreadCount
    Total number of Diagnostics Agents * 1.5
    900
    ThreadManager -> MinThreadCount
    Total number of Diagnostics Agents
    600
    ConnectionManipulator -> maxSoTimeOutConnections
    Total number of Diagnostics Agents * 1.35
    810
    ConnectionManipulator -> MaxParallelUsers
    Total number of Diagnostics Agents + 50
    650
    In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki 
    guide check the section Required Solution Manager Java Stack Settings (Scalability)
    I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
    minthreadcount , maxSoTimeOutConnections.
    With Regards
    Ashutosh Chaturvedi

Maybe you are looking for