JFrame fit in window

frmFrame1 = new JFrame("Test Frame");
frmFrame1.setSize(600,400);
i have a main panel with cardlayout in this frame which inturn have several different screens
not sure why but when the first time application is launched window is not getting set within this size limit. trying to get the window exactly to this size. any idea...

If you call frmFrame1.pack() then the frame will resize itself to accomodate all the the components within it, and your call to setSize() is irrelevant. If you call frmFrame1.validate(), then the frame will lay itself out within the size you set using setSize().

Similar Messages

In Rtf Template ,table is not fit with window after hide columns

Hi,
In my RTF template i have table with 5 columns in that 3 colums will display based on condition. During runtime it showing correctly with 5 columns i.e fit to window.
suppose if any of column is not displayed(hide) and table is shrinking and not fit with window.
Tried with following option in word doc:
Right click on table and select Auto Fit--> Auto fit to window. but didn't work. Please let me know is any options to make table to fit with window.
Thanks..
Edited by: user9530489 on May 3, 2011 1:09 PM

Hi,
I've changed the output device in order to test with the LP01 printer.
This device is not active in SPAD but if i setup my action with this device I can preview the smartform. It is not possible to preview the smartform with the printer that I'd like to use.
Any ideas?
Thanks in advance,
Stephanie

Image quality poor when using "fit in window" view

Hello,
i´m getting familiar with PS CS3 Demo and what buffles me is the poor quality of the downsized view of large images. I loaded a 8 MP JPEG image from a digital camera and it looks good in 100%, but when i choose to view the whole image to fit the window (33,33% in my case), the resulting "downsampled" image is very jaggy and pixelated. I use a freeware image viewer called Xnview that gives me a far superior view when viewing large images downsized - i can even choose to select a "HQ" mode so those images get resampled to look better. It it normal that PS does not offer such a thing (or did i not see it?) and delivers such poor visual quality or is there something wrong with my PC?
Thanks for your help.

Though 6.735, 12.5, 25 and 50% views usually are OK too. "Image quality" is great, though sometimes deceivingly so. I guess I don't understand sampling enough to tell you why 33% looks bad (rounding errors, I suppose). But 66% makes sense. You're trying to stuff 3 pixels into the space of 2.
Dave, what are the advantages to these nearest neighbor views instead of bicubic (or even bi-linear). Just speed?
J

Workbook doesn't fit the window when launched from Portal

Hello SCNer's,
When a workbook is launched from Portal it opens to the right side of the window and is minimized.
It fits the window once maximized, are there any settings available which can defaultly set the workbook to fit the window.
Thanks SCNer's.

Hi,
Do you mean by executing the Query in portal or executing the Workbook.
Protal setting for the number of columns/rows are decided by 0ANALZER_PATTERN web template. Which is the default web template.
Check the settings in the Default Web Template used.
Thanks & Regards,
Namrata

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

CREATING A PDF THAT OPENS TO 'FIT IN WINDOW'

Using InDesign (I'm CS2) is it possible to create a pdf with a default setting so that no matter who opens it (with Acrobat) it will open to 'fit in window'?
Is this a creator defined attribute?
I know that one can set their preferences in Acrobat so that all files open to 'fit in window'. But is there something that InDesign can do to insure this will happen no matter the end user's preference settings?
If not, is there a cheat? Is there a default dimension that will assuredly open to fit in someone's window? In other words, I would use this cheat for all e-mailed versions of the file.
Thanks!

Sorry...you already know the only way to get this to happen.
Bob

After upgrade to 22.0 when sidebar is open, some pages no longer fit in window like in version 19.

After seeing suggestions I tried adjusting the about.config CSS setting from -1 to 1, etc. But this just changes the size of all pages. Not a fix because some pages are okay to begin with, so they don't need shrinking. All Pages seem to fit until I open the bookmark sidebar. Then about half of the pages I visit (facebook for example) don't fit on the page & I have to scroll back & forth horizontally to read them. Other pages (http://www.ric.edu/ for example) fit the window perfectly.

If web pages needs to be adjusted after changing this pref then you can look at the Default FullZoom Level or NoSquint extension.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Use this extension to adjust the font size for the user interface:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How do I get "fit to window width" to work?

I'm having a problem getting "fit to window width" to work. It was working ok until recently. I'm viewing a letter size page and full page view is at 73.1%. When I select fit to window width it goes to 72.9% and is still in full page view.
Is there some setting somewhere to fix this?
Thanks,
Mike

Hi Mike20878,
Thank You for posting on the forums. Kindly try the steps mentioned below, hope it helps.
1) Open Acrobat
2) Click on Edit>Preferences
3) Go to Page Display under Categories
4) Change the ZOOM to "Fit Width"
5) Click OK
6) Restart Acrobat and then open the file.
The preference now saved would apply to all files.
Thanks,
Vikrantt Singh

Automatically create checkboxes and fit to window

Is there a way to automatically increase the number of check-boxes that appear on a user input dialog box?
This is what I am trying to accomplish:
Read in an array of strings
Create checkboxes based on the array size and fit to window (similar to express vi)
ThanksNAdvance
FredFred
Solved!
Go to Solution.

One slight change to the cluster, I would either put an clear decoration over the string control or disable the string control (property disable = 1) to prevent the user from typing on the string control. I use this disable trick to make the appearance of clusters that are controls and indicatiors (eventhough ther are really all controls)
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Is there a "fit in window" feature?

I want to make a window any size, then "fit to window". Is that possible?

some of the image disappears behind the other windows.
Yes I'm afraid on PC, looks like you are now compelled to use the 'Application Frame'. Each one of the three Screen Modes will put the image behind the panels, at default positioning. Try repositioning it as c.pfaffenbichler has suggested.
Heres some more shortcuts which may help, some of which you may already know, some of which you almost certainly won't: - Control + and Control zoom the image. If you don't have Open GL - Bottom left of your application frame is a small box showing the percentage your image is currently displaying at. Hold down the control key and move a small slider left and right will zoom accurately, Add option to this will zoom more slowly. Control 1 puts the image at 100%. Space bar pans the image. F key switches screen modes.
With a combination of these you should be able to reposition your image very quickly.
WHY NOT MAKE A FEATURE REQUEST - Please add zoom (fit to window)? ignore panels option

"Fit to Window" won't stay from page to page

I just installed Firefox and can't get the amount of zoom to stay from page to page. I downloaded Default FullZoom Level but all it gives me is a list of options every time I go to a new page. I check "Fit to Window" but it won't stay and it doesn't give me the option of making it default. Thanks.

Checkout this http://forums.logitech.com/t5/G-Series-Gaming-Keyboards/G19-keeps-opening-iTunes /m-p/794559
I found out it was my keyboard's software. If you have a different keyboard it may still be the cause.
This worked for me nicely. I can close itunes whenever I want now.

Can't Flex apps scale to fit browser window?

This has been brought up a couple of times, but seems to be a
mystery: How does one scale all content to fit the browser window,
preserving aspect ratio, and centering the content vertically or
horizontally (depending on whether the window aspect ratio is less
than or greater than the content aspect ratio)?
Since Flash is vector-based, I would have thought this would
be straightforward and encouraged!
Some information in an earlier post, plus experimentation on
my part, has yielded a bizarre and inflexible partial solution -
using StageScaleMode, and sizing the app's base container to
exactly 500x375 pixels, I can get content that scales with
the window size and doesn't have mismatched margins (though I
haven't figured out how to center it yet). In addition, there are
ugly scaling artifacts (look at the drop-shadows as you change the
browser window size).
Again, not being a Flash programmer, I baffled that this
isn't better supported, but I have to admit, most of the Flash apps
I've seen in the wild seem to all be fixed at some ridiculous size
like 640x480 or something. Are there some serious bugs here, or am
I missing something? Is there a better approach?
Here's a simple, complete, example (based on an example from
an earlier thread, but simplified a good bit):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx='
http://www.adobe.com/2006/mxml'
pageTitle="Resize Test"
layout="absolute" autoLayout="false"
addedToStage="event.currentTarget.stage.scaleMode =
StageScaleMode.SHOW_ALL"
>
<mx:Style>
VBox {
cornerRadius: 4;
borderStyle: solid; border-color: #000000; borderSize: 1;
horizontalAlign: center; verticalAlign: middle;
dropShadowEnabled: true;
</mx:Style>
<mx:VBox width="500" height="375"
backgroundColor="#808080"
paddingTop="20" paddingBottom="20" paddingLeft="20"
paddingRight="20">
<mx:VBox width="100%" height="100%"
backgroundColor="#808000">
<mx:Label text="This is some text" fontSize="12"
width="128" textAlign="center"/>
<mx:Button label="Button"/>
</mx:VBox>
</mx:VBox>
</mx:Application>

quote:
Originally posted by:
jpwrunyan
Not bitmaps. Externally loaded images that get converted to
bitmaps. What I said is that 90%+ are online catalogues. Logically
it would be safe to assume they display external images of a set
size. Sorry that was unclear. It would interesting to see an
official survey.
Yeah, I was using "bitmap" to mean raster graphics, whether
the actual source be jpg, png or what have you.
quote:
Originally posted by:
jpwrunyan
And good luck getting anyone from Adobe to pay attention to
this forum let alone comment. Better to contact their support if
you're ever really stuck.
Another reason I'm thinking MS is going to win this war - my
colleague is having great luck in the WPF forums.
quote:
Originally posted by:
jpwrunyan
Another reason I thought of why resizing does not result in
rescaling by default:
HTML and JSP applications don't rescale when you change the
browser size. Just go to hotmail or msn and check. They reposition.
Flex applications are intended to behave the same way but with RIA
capabilities. That is probably the more likely explanation than
bitmaps merely not scaling well. Anyway, this behaviour was a
thought-out decision and I happen to agree with it. By the way,
older Flash applications
do rescale to fit the window by default.
Exactly! That's the big problem, in my view, with the
HTML/JPG based web, and is what a vector-based solution
(discounting raster graphics) should solve.
Firefox, and now IE7, have features to allow you to scale web
pages to overcome, in a stop-gap way, this problem. IE even scales
images and Flash apps, though some Flash suffers problems when
scaled. Firefox does not (yet?) scale images or Flash along with
the other content. Flash-based Elmo games at sesamestree.org, at
640x480, look pretty stupid on my 42" 1920x1080 LCD (played by my
3-year old, not me!), but at least I can now (try) to scale them up
with IE7 for him.
I do not believe this was a thought-out decision, it's just
inertia from the bad old ways of doing things. There should be a
working option to easily scale content to the browser window, and
if Flex doesn't provide one, Microsoft certainly is going to (with
WPF/E) as they have with WPF. I'm not a big MS fan, but I think
they get the way things are going with the proliferation in the
range of screen resolutions and sizes that web content is being
displayed on.
That said, I realize there is more to dealing with different
screen sizes than just scaling - you may have to change the amount
of content on the screen, dependent on what the subject is.
quote:
Originally posted by:
jpwrunyan
Now if you want the Flash Player to be able to import huge
.jpg files with 1000px+ resolution and selectively only load enough
information to make a smaller size bitmap image so you can rescale
with impunity, more power to you. Sounds great. I would love this.
But it still doesn't address what should happen when the image goes
beyond the original size. I know you're only using vector graphics
so it's not an issue for you.
Yep, raster graphics are troublesome. Worst case, a beautiful
picture frame grows to surround the image as one zooms beyond its
original size (insert smiley icon of choice here)
quote:
Originally posted by:
jpwrunyan
Finally to get back on the main topic:
if SWFLoader isn't working well, you could programatically do
the same thing. Have a sub-contaier inside the application
container which adjusts its scale accordingly to the size of the
parent application container. I have done this myself with the
Image class for zooming in and out from images (ironically 1000px+
images which were displayed at much smaller sizes).
<Application resize="adjustSize()"
creationComplete="adjustSize()" paddingLeft="0" paddingRight="0"
paddingTop="0" paddingBottom="0">
<Script>
private function adjustSize():void {
var newScaleX = this.width/content.width
var newScaleY = this.height/content.height
content.scaleX = newScaleX;
content.scaleY = newScaleY;
</Script>
<Box id="content" borderStyle="none" width=400 height=300
/> 
</Application>
Something along the lines of the above should definitely
work. I am just basing it off my own previous code. You may have to
be careful of borders and padding if you decide to add them.
Whether it works better than the other suggestions you'll have to
decide.
Thanks for the code, and I'll try it. I'm new to Flex, and so
I'm still struggling with some things (such as when objects are
available for manipulation).

Lync 2013 actual size of shared presentation does not fit to window

In Lync 2013 with Win 8 - I am unable to click the actual size (fit to window) icon and see a change on screen so data being presented is hard to read. I click the icon and nothing happens.
How can I resolve this?

Hi,
Please try following registry key to change IM window size.
HKCU:\Software\Microsoft\Office\15.0\Lync
IMGCNoExtensionTabbedFrameWidth
IMLargeExtensionTabbedFrameWidth
IMMediumExtensionTabbedFrameWidth
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Video does not fit canvas window

Hello All,
When I import a clip to the timeline, it shows in my canvas with a black border. How do I make this fit the window? I do not want a border around it when I play it on DVD. Please help!?!!??

You need to have Image+Wireframe ON to grab a drag point (little squares at each corner) to re-size to full screen.
Ensure the Viewer and Canvas are set to "Fit to Window" before starting.
Double click the small clip in the Timeline, it opens in the Viewer.
Place the playhead over the Timeline clip.
When you scale the clip in the Viewer you will see it update in the Canvas.
This way you see waht you will get straight away.
Al

Table does not fit into window.

Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards

>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D

JFrame fit in window

Similar Messages

Maybe you are looking for