Job ZINF_TRANS_ACK_FILE_CITI is not active- Cancellation not possible!

hi,
one job is in ready state from long time and unable to stop/delete.
Error is like job is not active- cancellation not possible.
Kindly someone suggest me how to cancel the job on priority.
Thanks in advance!!
Regards,
Jeevan Reddy

Hello Bala,
This is not a PI question. You should have raised the question in different forum.
Anyways, You can delete a JOB.
Place cursor on the Job , goto JOB in the top right and delete the JOB.
Thanks,
Kalyan

Similar Messages

Sales area check in backend customizing not activated - MDSD not possible

HI,
While working test cases for upgrade to ECC 6.0 we encountered error message /DSD/ME 070 "Sales area check in backend processing not activated -> MDSD not possible" while trying to create a customer via an intranet application. I have searched forums, OSS messages, the DSD configuration guide, SAP help, and everything else I can find and have found nothing.
Can someone please point me to proper configuration setting?
Thanks
Steve

Hi Steve
Maybe is a problem in customizing. In SPRO --> Logistics Execution --> Direct Sttorage Delivery --> Basic Function --> Activate single Sales Area Processes.
Mark the flag and test.
Regards, Jenny

EHP4 installed but "DSD is not active - function not possible"

Dear Gurus,
        In IDES ERP6 EHP4, it have "SAP Menu -> Logistics -> Logistics Execution -> Direct Store Delivery" menu.
        But DEV ERP6 EHP4, it don't have above menu.
        When I run t-code "/n/DSD/VC_VP", it error "DSD is not active - function not possible"
                   Note Message no. /DSD/VC_MESSAGE001
        How to activate DSD on ERP6 EHP4?
        Please advice.
Best regards,
Choosak B.

Hi,
       Thank you for your response.
       Now, I can activate DSD with SPRO -> Activate Business Functions -> ENTERPRISE_BUSINESS_FUNCTIONS -> /DSD/BF
Best regards,
Choosak B.

Qty update not active, function not possible error in MIGO

Dear all,
User faces , u201Cqty update not active, function not possibleu201D error in MIGO.
The receipt is for an STO and the material is split valuated. Qty and value updation is active and already similar receipt has been done for many qty.
Throw some light on this
Regards,
Antony

Hi Antony,
Was the material type for the material changed recently? Pls. check the same.
If the qty update is active for the receiving plant & material type, then there should not be any issue.
Regards
Prabhu S

Account not active or not pending

Hi all
I need to have scenerios and undestanding on the accont not active or not pending and what does it relates in ISU
and what are the tcodes and flow where i need to dig in furthe to have clear picture of same and its implication..
and are we not covering it as part of standard sap functionlaity
regards
Prieti
Moderator note - thread locked, no research
See Help to determine Active and Final Billed Contracts

Hi,
go to trc rsd1, enter the InfoObject 0BUS_AREA.
In the Menu "EXTRAS" select Write transport request.
When propted enter a package and the relevant transportation request (or create one).
Afterwards release the new transport request and import it into the target system. Then try to import the initial request (the one that caused the error) again.
hth
cheers
Sven

Team membership invitation sent, accepted, but not active, why not?

My Admin user licenses page displays status as "Invitation sent" but not showing as active. How do I get it to show it as active?
Mac OS 10.9.5
CC 2014
Firefox 34

As far as I know, this Cloud forum is more about individuals
Team license links that may help
-http://www.adobe.com/creativecloud/buy/business.html
-team plans https://creative.adobe.com/plans?plan=team
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0 may help
or
This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

How do I delete pages that keep coming up when I open with first letter? Stop Loading Page icon not activated - does not respond

How do I delete pages I don't want loaded anymore from coming up? The 'stop loading pages' icon does not respond

If you update to Firefox 3.5.x or 3.6.x then you have more options for the location bar behavior.
See [[Smart Location Bar]]
For Firefox 3.0.x See http://forums.mozillazine.org/viewtopic.php?f=38&t=685365 - Customising the Firefox 3 Location Bar
Old Location Bar: https://addons.mozilla.org/firefox/addon/7637

TS1292 My redeem code is not activated

my itune redeem code is not activated why ?

Possibly because the shop that you bought it from didn't activate it properly - are you able to take it back and ask them to do so ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Forms not active in Communication tab in Customs Declaration

Hi,
The forms (Shippers Letter of Instructions, SED, COO etc) are not active and not showing up in "Communication" tab of Customs Declaration while creating a customs declaration manually from transaction /SAPSLL/CL_CUS_01.
Appreciate any help in pointing to missing configuration or activation of BAdI etc.
Followed the steps in "Communication Processes" in Customs Management in IMG
1. Action Profile:          US_CU_EX      (US: Customs Processing (Export)
No changes made
2. Action Definition:
Action Definition     Description     Sort Order
US_CU_EX_CUSEX_M_UAES2     Export Declaration Option 2 (US)     0
US_CU_EX_CUSEX_P_COO     Certificate of Origin (US)
US_CU_EX_CUSEX_P_SED     Shipper's Export Declaration (US)     0
US_CU_EX_CUSEX_P_SLI     Shipper's Letter of Instructions (US)
No changes made
3. Messages for Communication Process:
Message     Description     Message Type     Scheme
P0350     Certificate of Origin (US)     /SAPSLL/CUS_EXP     CUS_US
P0360     Shipper's Export Declaration (US)     /SAPSLL/CUS_EXP     CUS_US
P0370     Shipper's Letter of Instructions (US)     /SAPSLL/CUS_EXP     CUS_US
Assigned Scheme
4. Control Settings for Communication Process:
Process CUSEX
CUSEX     Export     Export/Dispatch     Export / Reexport
Activities:
CUSEX     Export Declaration          SED
Messages:
M0410     Export Declaration Option 2 (US)
P0130     NAFTA Certificate of Origin (NAFTA)
P0140     Export Packing List NAFTA (NAFTA)
P0350     Certificate of Origin (US)
P0360     Shipper's Export Declaration (US)
P0370     Shipper's Letter of Instructions (US)
5.Print Control for Foreign Trade Documents:
Assigned Message to Legal Unit
6. Print Profile:
Defined Print Profile (where to assign this?)
Thanks
Sreekar

Hi Venkat,
Sorry for delay in reply and thanks for helping me out on this issue. We have worked out the ADS configuration issues, set up master data for printer, set up .xdc files for printer etc. and are now able to display the forms and able to 'print preview' the forms.
However, when I print preview the form, the print icon is grayed out. I am not able to print the form. Can you please advise what am I missing?
Thanks
Sreekar

GR- based invoice verification not active

Hi guys, need your help.
I have a PO with Inv. receipt, GR-Based Inv and ERS flag activated. I also have these flag active in vendor master and in PIR. I am trying to post invoice via MRRL and i am getting the error "GR-based invoice verification not active". Not sure why?? i already checked it and flags were active since last few years and nobody made any changes since then. PO was created just last month.
Any help be appreciated!

Hi,
In ERS PO invoice is not done... and take off the ERS indicator from the VN Master.
Tick the GR IV in PIR and in PO, GR IV , ERS and enter the Tax CODE.
ERS is a cridit memo procedure.

SAPMV50A screen number 3302 not activating

Hi All,
I'm unable to activating standard module pool program SAPMV50A screen number-3302, The purpose why i changed is ,added one customized field to this screen and now i want to activate Module pool SAPMV50A 3302 but its still not activating.
Not evening showing the syntax error also,status message showing activated but,screen number is Modified/Active only. Because of this problem stopped all standard transaction please advise ASAP.
Thank you,
Pranitha.

thankx resolved my self.

SSO logon not possible; logon tickets not activated on the server

When I am on RWB
1) click "component monitoring" ->"display all"
2) click "CCMS"
I get a popup says:
"SSO logon not possible; logon tickets not activated on the server"
I find some threads about this on SDN but they are about
EP. My case is PI7.0SP08.
Please advise how to overcome this issue?
Thanks w/ points.
Message was edited by:
jennifer lee

hI,
do you have the follwoing in our SXMB_ADM if not add them.
SXMB_ADM->IntegrationEngine configuratin-> edit the speicifc configuratin then add the follwoing
Category:RUNTIME Parameters: logging Value:1
If its done. check this alos...whether your browser settings will accept the cookies or not. for SSO logon ticket method you need to have cookies accepted by our browser so check it. in internet page slect TOOLS ->internet options then ckeck for cookies settings.
How to Enable Single-Sign-On for XI 3.0 at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/content.htm
regards
manoj kumar

Profile does not activated (it shows an error backup is not possible)

Dear Experts ,
please solve my problem
here i changed one parameter by RZ10 in DEFAULT profile and i saved it then it prompts for Activate or not i said yes but the profile is not activated and it shows an error that is backup is not possible
parameter (login/system_client =100)
i did not get why it showing that error
please clarefy me
Regards

Hi,
Make sure that there is proper access for this file at the OS level. Normally, when you are changing any profile at SAP level it will try to create a backup of existing file at OS level. Also, check if the parameter is set correctly and saved properly.
If you are not able to change the file at SAP from RZ10 then change the same at OS level and after that restart the instance for parameter to take effect. After the system is restarted then again the load the profiles back in to the system using RZ10-->Utilities->Import profile->of active servers
Regards,
Sharath

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

Activation is not possible due to warnings (Partner Assignment)

Hi,
While activating a contract getting an error "Activation is not possible due to warnings (Partner Assignment)"
Thanks and Regards
Srihari

Hi all
Just had an upgrade and I am experiencing the same problem: Message no. RECN027
Activation is not possible due to warnings (Partner Assignment) when trying to activate the Contract in RECN.
Where in the Business Partner do I change the validation of the partner please
Thanks in advance
Gavin

Job ZINF_TRANS_ACK_FILE_CITI is not active- Cancellation not possible!

Similar Messages

Maybe you are looking for