Labview 10.0.1 development system has stopped working

I am getting this cryptic message when trying to build an EXE in windows 7.
It happens right at the end of the build process when the application builder message says "saving main.vi" where "Main.vi" is the primary.
It forces labVIEW to close.
Anyone have any experience troubleshooting an error like this?
Thanks -

I am experiencing the same issue. I am no longer able to build the Host exe (i.e. an exe under the My Computer target) for a certain project. I am able to build the RT exe under 2 different cFP-2220 targets in the same project. I am also able to build the Host exe in different, but very similar projects. I can also build the exe from this exact same project on different computers that have the same installation of labview. Creating a new project allowed me to build the host when only the host part was in the project - when I added the RT target, it failed. Cleaning the old build and trying again (and again..) does not help.
I was using LabVIEW 2011 SP1, but I just upgraded to the f2 patch (which did not help). Here are the series of error messages I get:
Step 1 try to build the exe, it gets almost to the end and then freezes up:
Clicking degug gives:
Debug...
Ok...
jeffneuner - did you ever find a solution?
Does anyone have any other suggestions for debugging or getting this to work?
I don't have any experience using the LabWindows/CVI debugger, maybe there is something I can do with this?
Thanks!
Lauren

Similar Messages

LabVIEW 11.0 Development System has stopped working (happens every time I close manually)

Perhaps this issue is related to my computer only?
Does anyone else experience this when the manually close labview's "getting started" window?
All I have to do is open labview then close the window... everytime.
Here is the data dump from the crash alert window:
Problem signature:
Problem Event Name: APPCRASH
Application Name: LabVIEW.exe
Application Version: 11.0.0.4029
Application Timestamp: 4e0213b5
Fault Module Name: RpcRtRemote.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7992f
Exception Code: 80000003
Exception Offset: 00006369
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
I'm using win7 x64
Thanks
-pat

I have not seen that problem before. But I would try to reinstall/repair LabVIEW via the control panel->programs and features.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Satellite 1130-Z24,system has stopped working altogether

Hi
My system has stopped working altogether, since it was dropped, only from a small distance though. When connected to AC power, the light work, so I suspect power is getting to it, and I suspect I have damaged either the motherboard or power supply, but I am hoping something simple. Has anybody any manuals showing how to dismantle the satellite 1130, or any other suggestions.
Kind Rgrds
Chris

Hello Chris
Unfortunately there is no official document how to disassemble/assemble your Satellite. In my opinion the best solution is to contact service partner in your country.
I am pretty sure that they can help you. Who knows which hardware part is damaged.
Good luck!

LV 8.6 will Not Compile in LV 2010 - Labview 10.0 Development System Has Encountered a Problem and Needs to Close

I submitted this support request to NI on 8/12/2010.
When I compile my LV 8.6 app in LV2010 I get this error:
"LabVIEW 10.0 Development System has encountered a problem and needs to close. We are sorry for the inconvenience."
I was told to do a "Mass Compile" of my LV 8.6 app in LV2010...this failed too.
I was then told to go to each and every vi and "Mass Compile" individually...after about the 50th vi this got old quickly...and it still didn't compile. I then sent NI tech support "my code". The good news is my LV 8.6 app didn't compile with LV2010 @ NI.
My LV 8.6 app compiles and runs great in LV 8.6. I don't want to be left behind with the newer upgrades and I want to move to LV2010. I have lots of LV8.6 code to maintain and I really don't have the time to debug all of my apps.
I was told this will be looked @ in LV2010 SP1.
One note...back up your LV8.6 data before you move to LV2010. Once your LV8.6 code is compiled in LV2010 you will not be able to go back to LV8.6.
I restored all of my LV8.6 code and I'm back working with LV8.6.
It's a tough call, do I stay in LV8.6 and get left behind?
Do I bite the bullet and try to debug this mess in LV2010?
I was told the compiler is completely different in LV2010. That's great, but one reason I have NI Maintenance Agreement is to keep updated with the latest software. I can't afford to re-compile LV code every few years. Like most people, maintaining my Apps with customer's revisions, and modifications is enough work. I don't want more work!
I was told LV2010 SP1 would likely appear in May or June of 2011. I'd hate to break out my old Turbo Pascal apps again...but hey...they still work! My NI maintenance agreement is due this month too, I guess I'll pay NI one more year, and see if they come up with a solution. But if NI doesn't fix this LV8.6 compile in LV2010 problem...I don't see any value staying current with LV software.
I found another Bug with LV2010...you are going to love this one!
There is a new "LV Update Service". Perfect! I like updating my LV software when new patches are available. When I click "update" the update spins over and over "Checking for New Version". I have let it run ALL day with no results...just sits and spins over and over.
OK, I know give NI a break! Yes, LV2010 has a new compiler...and Yes, I will renew my NI maintenance agreement. I just want NI to know failing to compile just one LV8.6 app in LV2010 is not a good idea for customer relations.
Thanks,
Doug

For your update service problem
Unable to Update Current Version of NI Update Service
Why am I Unable to Update My Version of NI Update Service in Windows Vista or Windows 7?

Occasional error message saying "Labview.exe has stopped working"

Hi,
I am using Labview 8.0 on a Windows Vista operating system to communicate with lab instruments through GPIB. Occasionally, when one of my programs finishes running, an error message appears saying "Labview.exe has stopped working". The error window gives me the option to close the program or debug. After clicking debug, Windows cannot find the source of the error and the all labview applications get closed. Any ideas? Thanks.

The code that I have been having an issue with is attached. The main program is called "Frequency Sweep Real Time2". The other two attachments are subVI's used within the main program. I am a young programmer and I have never had any official training with Labview so sorry if my Labview programming is unconventional or just plain bad. Thanks to whoever looks this over.
-Ryan
Attachments:
Frequency Sweep Real Time2.vi ‏443 KB
Read multiple values.vi ‏26 KB
Save_data2.vi ‏22 KB

A889 system has stopped

When I go to system update
"Unfortunately, system has stopped"
Dialog bo Appear

Hi
You are running a custom firmware(The firmware developer probably removed or added something.That's why System Update crashes)....You won't be able to update via System Update !
Sorry.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS1717 Ever since I downloaded and installed iTunes64Setup.exe v. 6.0.1, it crashes on my Windows 7 system, with the useless message, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program an

iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylew

Hi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

Laserjet CP1025nw HP system tray has stopped working

I bought this printer a month ago and about a week ago I started getting the error“HPCP1020SM.exe (64 bit) has stopped working.” then click close then“HP system tray has stopped working.” appears click close. the printer will still print but these errors continue to come up every time I print. I called HP support but they have no clue. Thanks for who ever can help.

Hi Have you tried installing the basic driver, and the basic driver update to see if you have the same issue? Let me know if you have the same issue using the basic driver. Can you also provide me a screenshot of the error message you are receiving? Firmware update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&os=228&product=4052972&sw_lang= Basic driver:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang= Basic driver update:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-98162-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang=

During the software update the system has stop since 14 hours ???

I recently bought a Mac Pro with 16GB and 512Gb Flash Memory ,as i retutn home and try to up date the software the system has stop since 14 hours.
I'm new to the Mac word and i would like to Know if it is normal that any Software update takes so Long time.
Thanks's
Angelo

It's something wrong, you'd better stop software update and restart update again.

SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
This is the included information.
Problem Event Name: CLR20r3
Problem Signature 01: setupchainerui.exe
Problem Signature 02: 7.0.9538.0
Problem Signature 03: 509042f2
Problem Signature 04: System
Problem Signature 05: 4.0.30319.18022
Problem Signature 06: 506a7689
Problem Signature 07: 1cf5
Problem Signature 08: 72
Problem Signature 09: System.UriFormatException
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 79c6
Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
Additional Information 3: 88ec
Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
The only error I get in the log file is this.
Error: :Error:IsReportingValidToInstall failed SRS instance not provided
I don't understand why I would be getting an SRS error, our reports run fine.
Thanks,
Gary

Hi Gary,
Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
App Log Errors:
Application: SetupChainerUI.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
Stack:
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
   at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
   at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
Exception code: 0xe0434352
Fault offset: 0x00000000000043c8
Faulting process id: 0x638
Faulting application start time: 0x01cf9a697847d9c8
Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
Faulting package full name:
Faulting package-relative application ID:

Many years ago I purchased CS2 with serial number 1130-0676-7755-3637-6984-8039. Later i purchased a used macmini from a private party with OSX 10.6.8 with CS5 already on it. It has stopped working. Can I purchase a new version of CS5 for my older system

My name is Don Lewis. My email is [email protected]
Many years ago I purchased CS2 for my older Mac Mini with OSX 10.4.11. My serial number is 1130-0676-7755-3637-0984-8039. Then a few years later I purchased another Mac Mini with OSX 10.6.8 from a private party that had CS5 already installed which now has stopped working on that computer. Can I purchase an CS5 upgrade for my OSX 10.6.8 from Adobe Systems?

Can I get any answer to my question?
My name is Don Lewis. My email is [email protected]
Many years ago I purchased CS2 for my older Mac Mini with OSX 10.4.11. My serial number is 1130-0676-7755-3637-0984-8039. Then a few years later I purchased another Mac Mini with OSX 10.6.8 from a private party that had CS5 already installed which now has stopped working on that computer. Can I purchase an CS5 upgrade for my OSX 10.6.8 from Adobe Systems?
forumnotifier

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

Memory Footprint for LabVIEW 7.1 Full Development System

Hello,
I would like to know the memory footprint for LabVIEW 7.1 Full Development System.Both during the installtion and for developing applications later.
Can someone help.Thank you.
Solved!
Go to Solution.

There isn't a single answer for that, as this varies considerably.
As far as disk space goes, if memory serves, the basic 7.x takes up a few hundred MB, but that could inflate considerably depending on which modules and drivers you add to it.
For RAM, I believe 7.0 used to take up ~20-50 MB immediately after being loaded, but that number would then also change a lot over time depending on what you do. Loading, editing and running code all regularly change the amount of RAM used.
Why are you asking? Also, are you aware that 7.1 is relatively old by now (came out 7 years ago)?
Try to take over the world!

Labview 10.0.1 development system has stopped working

Similar Messages

Maybe you are looking for