Laserjet 1505 Windows 7 64 bit problems

Hello,
I work for a community college in the IT dept. We are currently upgrading our computers to Windows 7 64 bit OS. I have two computers which have a Laserjet 1505 with them. I have tried several combinations of drivers, including the downloadable CD equivalent software. I can get the test page to print out just fine but when i leave and the user try's to print anything it starts to go through a sequence of trying to print for at least 3 rotations. The error lights will flash in sequence and no error message pops up on the screen. If I log into a local admin account and try printing a test page the error will seem to go away, for a time at least. However printing on envelopes may slow down. It seems as though this may be a permissions issue. A power cycle will also seem to wreck havoc on the printer as well. I dont think this is a driver issue because things seem to change just by changing logged in user. However I could be wrong about that. Any help would be much appreciated.

I would first like to thank the HP tech support for all the help with this issue. Your dedication to your customers was pivotal in this 3 week long troubleshooting process.
Now for anyone out there who may have a similar problem and don't feel like being jerked around for more money by the greedy corporation HP, Ill share my fix for this issue.
Log in to an administrator account and then go to Devices and printers. Right click on the P1505 printer icon and select Printer Properties. Go to the security tab at the top. Select everyone and give them all the options in the check boxes that you can. This includes Manage this Printer, Manage Documents and Print. This solved the issue of the printer slowing down and "Practicing printing" before actually printing.
I don't know why these privileges were causing the printer to fault but it appears that there was some change in how the default settings operate between XP and windows 7.

Similar Messages

'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!

Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

T520 (4240) / eSATA / Windows 7 32 bit Problem!

My first post - hoping someone can help!
I have a Lenovo Thinkpad T520 (4240) with Windows 7 32 bit OS. Purchased an external 3TB OWC Mercury SATA/USB2/FW800/FW400 hard drive and having major problems with eSATA only.
I have the internal switch in the drive set to 2TB only.
It works fine via USB and Firewire. Can be seen in Computer Management / Disk Management as a healthy volume with a valid drive letter. No issues.
HOWEVER, when plugging in via eSATA cable, major problems occur. Not recognized at all even after rescan, reboot, etc... I've upgraded bios, and the ATA controller to latest. Bios - 1.39 and IDE ATA/ATAPI Controller is Intel Mobile Express Chipset SATA AHCI Controller. I've played with changing iastorV start to 0, and msachi in registry and that doesn't work either.
If I am plugged in via eSATA cable and drive is on, then turn on and boot laptop, it hangs at the Windows start up screen indefinitiey. If I unplug the eSATA bale while that's happening, Windows continues loading fine.
I see all kinds of posts about eSATA and Windows 7 problems, but cannot resolve and get the drive to be regognized at all via eSATA.
THOUGHTS? HELP?
Garry

Well I went through nearly two years of troubles with eSATA with and external enclosure for Bytec. I could not see it with two express card controllers I bought thinking one must be defective. Even after I got the Thinkpad it wouldn't work and the other notebook was first XP and then Windows 7 32 bit. In the end it turned out to be the eclosure itself. The eSATA port was defective and I found out when I connnected another drive via eSATA to the old systems and Thinkpad. It worked with all the systems.
When I think of the countless hours of trouble shooting that problem I must have blow a gasket. Get your hands on another drive enclosure and/or test it on another systems.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Laserjet P1006, Windows 7, won't print readable maps (poor greyscale - halftones)

Laserjet P1006, Windows 7 64 bit,
won't print readable maps (poor greyscale - halftones)
The HP website shows a "density" slider control in the print driver, but the driver that they have for download doesn't have this control. I did set the driver to RET1600 but that made little improvement.
Tips to correct this flaw greatly appreciated!
AHI

2nd Request
I set this printer up with a Windows XP computer, and the printer works fine with the XP driver. The problem is with the WIndows 7 driver - the print density is too low to print maps in a readable fashion.
Can anyone please help with printing greyscale (maps in this case) in the HP Laserjet P1006 with Windows 7 ???

Laserjet 1505 connected to AEB 802.11n via USB keeps timing out after print

I have a HP Laserjet 1505 connected on my AEB 802.11n via USB and shared on my network, on my network are two macs connected via wifi and 3 WinXP PC connected via wire. I have Bonjour and WinXP laserjet drivers installed on all Win PC. Everytime I print from any of the computers, it will print the first time, but when I try printing again from any of the machines, the macs and winxp pc's cannot detect the printer. When I go to airport utility, the printer cannot be detected anymore. I have to hard reset the AEB for it to detect the laserjet printer again. But the same thing happens again after I print out another document. Has anybody encountered this kind of problem. Can anyone help me resolve this?

Here is what I got from HP support :
The driver for the Laserjet P1006 is not available yet for Os 10.5...we are hoping it will be release in the next week or so...please click on the link below to sign up for an email update as soon as it is available..As a workaround, some people have been able to use the 10.4 driver from the cd, but this is not guaranteed to work in all applications therefore the only solution is to wait and install the 10.5 driver.
So we wait.
Yves

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

[SOLVED] GNOME 3.8 annoying window resize problem

Hello all fellow early-adopters :-)
A very annoying quirk I've noticed, moving from GNOME 3.6 to 3.8, is that it no longer remembers, nor retains, the size/positions I set for many of my application windows. For example, my mail client (Evolution) is sized to fill most of my screen (centrally), with Empathy and Skype as long narrow windows on both sides - giving me a nice, broad "communications" overview on that particular desktop (with dev tools etc open on others).
On 3.6, this layout was retained during my session, as well as next time I started these apps up.
In GNOME 3.8, not only does it insist that these windows are always started as small little bunched-up windows that I need to resize, but every time a window displays a notification/warning (message in internal yellow bar inside the window - such as loss of internet connection, mail retrieval failure etc) it resizes the windows spontaneously to a stupid, small size that overlays the other windows. This is driving me crazy!
Where can I learn a bit more about how window sizing / positioning works in GNOME 3.8, or is it finally time to switch to awesome wm? I want to love GNOME 3.8, I really do. It's so slick, but so... unpolished.
I want to dig in an assist with problems like these, but I need some pointers to some background material first to understand the problem. Is it the window manager? Is it the app?
** UPDATE: Doing a full system upgrade, as of May 18, 2013, has resolved this annoying problem. My windows now stay where they belong, and start with the same size they were closed with. GNOME is now pleasant to use again :-)
Last edited by dawid.loubser (2013-05-21 13:37:25)

dawid.loubser wrote:Thanks for the suggestion drtebi - I'll give it a try.
I really like GNOME 3.x though (and would like to understand the windowing behaviour), but if the annoying quirks are insurmountable, I will happily switch.
Man I love GNOME 3.x. I admire the courage they had to change, basically, everything, and I find myself more productive with my GNOME 3 Arch box than with my good ol' Slackware KDE 4 box. I just hate those bugs - for example I filed a task in their bugtracker for this window resize problem I have with gedit. If it's a love/hate relationship, I think it's marriage ^_^
With the 3.8 upgrade, deadbeef was having a similar problem with window size/position. I just recompiled it against the latest GTK+3 package upgrade (that came after the 'big upgrade' here on Arch) and it was fixed. But not with gedit
bwat47 wrote:
Man I really hope this gets fixed soon, because aside from this one incredibly annoying issue I am loving gnome 3.8.
I get the feeling gnome badly needs more beta testers, sizable regressions like this in "stable" releases happen way too often sad.
I get the exact same feeling. Well bugs exist everywhere, there's no denying. But I think it would be wiser to 'alternate' the nature of each major stable release - one focusing on new features and one focusing on fixing bugs. For example if the only new features in GNOME 3.10 were the AppsFolder full implementation and the introduction of gnome-calendar, and the rest of the development cicle being devoted to fix bugs, I'd be more than happy.
Like Fedora and Ubuntu, the fixed 6-month release cycle colaborates with the bugs. They don't do like Debian or Slackware which are released 'when they are ready'.
EDIT: fout (yet) another bug. At least with facebook chat (haven't tested with other telepathy plugins) the buddy tray icon appear duplicate. Anybody with the same issue?
Last edited by lmello (2013-05-02 14:06:06)

Cannot download itunes.....says there is a windows inslaller problem

ttried to update my iphone 4 to ios5.......needed to update itunes....tried came up with windows inslaller .........removed itunes, now cannot install due to same windows inslaller problem, any ideas peeps......its doin my head in!!!!!!

Are you using a 32-bit or 64-bit version of Windows, Jim?
If it's 64-bit (Vista or Windows 7), I'd try the following instructions:
Vista Home Premium (x64) and installing Itunes - SOLUTION

More Airport, Bonjour, Windows printing problems

I have posted about this before, about my own success in getting Windows 7 laptops to print via Bonjour through an Airport Extreme. I thought I had it all figured out. However, yesterday I replaced my older model Airport Extreme (first generation 1102.n) with the most current model (considered 5th generation). I configured the new Airport Extreme via Airport utility which allowed me to copy the exact settings of the old one. Everything appeared to work fine until I tried to print from my HP laptop running Windows 7. This laptop printed to our Canon Pixma MP490 (the Canon is hooked up via USB to the Extreme) via the older Airport Extreme and Bonjour without any problem. Interestingly, I had no problem installing the printer on the laptop using Bonjour--it shows it and appears to be in proper configuration. I correctly put the Extreme's IP address as 10.0.1.1 as I have done before. When I try to print, the dialogue box appears and shows the Canon 490 ready to go, but when I click to print, nothing happens, nothing appears in the que for the Canon printer. I have tried the usual remedies, deleting and reinstalling the printer, restarting the Extreme and the laptop itself. It just doesn't want to talk to the printer. Any thoughts are appreciated. I have done extensive web searching without any new ideas.

The cover page of the following document is unprintable. You get an error message saying "no pages selected" if you start with page 1. You can only print the report if you avoid page 1 and start on page 2. I do not have problems with any other PDF documents.
http://www.bcauditor.com/files/publications/2011/report_4/report/OAGBC-Environmental-Asses sment-Office.pdf
I'm using Windows XP and a Laserjet 1000. This problem occurs with both Adobe Reader X or Foxit Reader 4.1.1.8005
Similar problems have been posted on http://forums.adobe.com/thread/392800
So it must be something peculiar about the way the cover page is designed.
Name: Jim Ronback

Does Running Boot Camp Solve Mavericks' Windows-Networking Problems?

Anyone running Mavericks in a Windows-server environment knows how agonizingly slow it is populating a window on the server if there are more than a few dozen files in it (we have 25-30 folders on our Windows server that have more than 10,000 files in each one, and they are all images files with sizes between 5 and 50 MBs each). When we open a folder that's on the server in Mavericks' Finder, it can take up to 30 minutes to populate that window. We have since reverted to Mountain Lion and although it's still slow to populate those windows, it's nowhere near as slow as Mavericks, and once the window populates, as long as we don't shut down the computer, the next time we open that window it populates within seconds (I'm guessing that some sort of cache file is created).
Does anyone know if running Windows in Boot Camp (or Parallels) would speed up the Windows-server window population problem? I'm guessing it might but I'm not sure if the computer is still connecting to the server using the Mac networking protocol. If I use my Windows 7 PC the server windows populate almost instantly.
Any help would be greatly appreciated.
Lloyd

From the Boot Camp System Requirements page: http://support.apple.com/kb/HT5634
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD
Your computer supports Windows 7 32bit with Boot Camp 4.

Reports 6i windows display problem on Windows NT system

Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

Connecting iPod Nano 8GB video model to Windows 2k problems

Hello!
I hope someone can help, I had a MacBook that died and now I need to move our 4 iPods to the windows 2k environment. When you plug in the iPod it says that it needs to be converted to Windows, not problem, I click "OK" then iTunes starts and gives me the following message:
The iPod "IPOD2" cannot be used because it requires iTunes version 7.6 or later.
Go to www.itunes.com to download the latest version of iTunes.
Ther is NO 7.6 for Windows 2K? Any help could be appreciated.
I have the latest version for W2K, and I have 1 Nano that has syncd fine. Anyone have any ideas, I have searched and tried all the tech docs I could find to no avail. The iPod is visible in "My Computer" but when you click on it it asks if I want to format it, worried about doing that. Can't find any instructions on resetting the iPod back to factory/out of the box WITHOUT ITUNES! that may help!
Thanks,
John

Ther is NO 7.6 for Windows 2K?
I'm afraid not. The last version of iTunes for Windows compatible with Windows 2000 was 7.3.2:
http://www.apple.com/support/downloads/itunes732forwindows2000.html
... and the third generation (video) nanos require at least iTunes 7.4.x (and 7.6 is currently recommended).

Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: firefox.exe Application Version: 1.9.2.3855 Application Timestamp: 4c48d5ce Hang Signature: 9962

I am having this problem, in the first window when I try to do anything.
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 1.9.2.3855
Application Timestamp: 4c48d5ce
Hang Signature: 9962
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Hang Signature 1: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 2: 2b94
Additional Hang Signature 3: 9acafbb8ad01bf9d2eb258d8fddad3ca
Additional Hang Signature 4: 9962
Additional Hang Signature 5: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 6: 2b94
Additional Hang Signature 7: 9acafbb8ad01bf9d2eb258d8fddad3ca
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I suspect a RAM or hardware problem.

Laserjet 1505 Windows 7 64 bit problems

Similar Messages

Maybe you are looking for