Launching the JIVE software in a separate window

Hi All,
I'd installed and configured Jive in the EP.
I'd created iView in Portal and its working fine. Now I want to launch the JIVE software in a separate window without portal navigation as
http://forum.abc.com/index.jspa.
i.e without giving portal information.
Any help in this regard will be highly appreciated.
Thanks and Regards
Puneet

Hi,
To launch Jive in separate window,
go to Dir:\usr\sap\E7O\JC01\j2ee\cluster\server0\apps\sap.com\com.sap.netweaver.coll.forums\servlet_jsp\forums\
root\templates\default.
In the template.jsp file change the
parent.location.replace("<%=portalServerUrl%>/irj/portal/forums?ForumsTarget=" + forumsTarget);
to
parent.location.replace("<%=portalServerUrl%>/forums/" + forumsTarget);
Regards
Puneet

Similar Messages

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in what is better for me, Bootcamp or parallels

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in what is better for me, Bootcamp or Parallels

The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

I installed the latest version of icloud control panel (allegedly Windows 8 compatible) on my Windows 8 laptop. Installation successful, but on clicking on the icloud icon nothing happens. The same software worked on my Windows 7 PC.

Superb detail, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Im unable to launch the itunes software inspite of repeatedly trying to install it, im unable to launch the itunes software inspite of repeatedly trying to install it

i am the owner of an asus 1000h netbook and an ipod nano 8gb . since i have an ipod i require the use of itunes on my netbook which has windows 8 on it . i have been facing considerable difficulty in installing the itunes software . if i install it then it doesnt launch . please suiggest a posssible cause and any way out from this problem . itunes used to function noramlly on my netbook till 2 months ago then one fine day it stopped responding im facing VERITABLE CAUSE of concern please advice

What kind of card is it ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

Problem about launch the Desktop Software for PC

Hi all,
I got the error message : "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." after I installed it by the zip installer named "610_b038_multilanguage.exe".
How to fix the error and launch the manager successdul?

I also cannot use the software with my Bold 9650. I have a solution though - buy an iPhone.

I get an appcrash message when I try to launch the desktop software

(personal info removed)

Hey terrapin7,
Can you please verify that the BlackBerry Desktop Software is installed in a user account with admin privileges? Here is a KB article that may help you out with this issue. "BlackBerry Desktop Software has stopped working. A problem caused the program to stop working." appears when launching BlackBerry Desktop Software" http://bbry.lv/ZZWKYn
If that doesn't help, I'd suggest contacting your wireless network provider to ask that they escalate this issue to RIM on your behalf for further investigation.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

How do I remove an old version of the Apple Software Updater from a Windows XP machine without a software disk?

How do I remove an old version of the Apple Software Updater program from a Windows XP SP3 machine
without an Apple Software disk? I keep getting a message saying that I need such a disk to uninstall
the old program so I can install Itunes software so I can download apps for my new Iphone 5S.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

How do I update the iOS software on iTunes for Windows

Hi all.
The battery life in my phone was decreasing very quickly to the point where I have turned it off with 100% at night, and wake up in the morning to have it at 0%. So yesterday, after making a few calls I got to this nice man who explained to me that it was not a problem with the battery, but I needed to update to the latest version of iOS (generally fixes the problem). I don't have enough space (and cannot clear it), so he suggested another option. I would have to use iTunes. First he told me to upload my data to iCloud. As I have not done it before, it took a while, and it did not work for a while. He sent me the link of what to do via email (Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support) and hung up, after me thanking him. My cloud finally updated a little before 10PM GMT and I went to sleep. In the morning my battery was not dead, albeit it had only gone done by a few %. However, I still want to update to the newest software.
I have the latest version of iTunes on my laptop and so this morning I plugged in my phone to my laptop (using the computer - phone plug). However I cannot see where to select my device. My phone is not coming up in any corner, and it is not charging when it is plugged into my laptop either (I read somewhere that it should). So my question is, how do I select my device. It is plugged in but it not coming up for me. Please be as explicit as possible.
If it helps I have an iPhone 4s bought in December 2013.
Thank you!

I'm not sure if it should be here or in the iPhone usage forum.

When interactive pdf opens in browser window can the pdf links open in separate windows

Problem is the pdf works ok when it opens in the browser window, BUT the links in the pdf don't open in separate browser windows, as they do when the pdf is downloaded as a file.
If pdf links can only open in separate browser window when the pdf itself opens as a separate file, the how do I email a pdf download link on a website.

Hello Yesh,
you can open PDFs as a guest user (without authentification):
1. Allow Guest Access (Admin -> Security Configuration -> Check "Allow Guest Access" and select a folder name).
2. Copy your Report into this guest folder
3. You can open the Report as PDF with a link like this:
http://(bip-server-name):9704/xmlpserver/(guest-folder-name)/(report-name)/(report-name).xdo?_xpt=0&_xf=pdf&_xmode=4(&report-parameters)
Just replace the strings in brackets. You find a great description of the URL parameters in Tim Dexters Blog
http://blogs.oracle.com/xmlpublisher/2006/07/accessing_xmlp_enterprise_repo.html
I didn't find an option to set the height of the PDF-Output for the guest user in the BIP-UI. Maybe I missed something. But you can manually edit the configuration file. It is located on your BIP server direcory in the subdirectory xmlp/XMLP/Users. Select the guest users subdirectory and edit the configuration file "user~.profile".
In this XML config file there is an entry "viewerHeight". In the Value-Tag you can enter the PDF output windows height in pixel (but unfortunaly not in % - this was the question of my original posting).
Hope that helps...
Sascha
Edited by: sascha@tesat on Oct 26, 2009 9:02 AM

Launch the individual SCOs in a new window

hi guys,
Testing out C4 and loving it, especially the aggregator function. I have combined 3 SCOs as one elearning course and successfully uploaded it to the LMS. When I clicked on the SCO, it opened in the same frame as the LMS screen. Can i get it to open in a new window? If so, how?
I looked at the imsmanifest.xml file but can't find anything obvious.
thanks
JT

There is no such option in InDesign CS6. It has to be accomplished in Acrobat by use of a JavaScript, as I recall. You should ask in the Acrobat forums for more informations.

I installed windows 7 with bootcamp, also the support software with the drivers. Everything works fine, but my usb hubs don't work on windows. Can Anybody help me?I´m using an iMac with OSX.

I Installed windows with bootcamp on my imac, with the support software(drivers,etc).
Windows works perfectly appart from the usb hubs.
Can anyone help me?

Hello,
Are these the built in hubs, or external ones?
If external, are they bus powered or do they have their own AC power?

Links created in Word, now in the pdf they won't open in a separate window

I created links in my Word documents, then converted this file to a pdf. Now when I open the pdf and click on a link it open in the same window and I am unable to get back to my original document. Is there a setting somewhere to make the links open in a separate window?

Pat, thanks for your reply. I finally had some time to look further into this problem and still trying to figure out. First to answer your questions:
what is your operating system & version? Windows 7 Professional
on what browser(s) does that happen? Google Chrome, Firefox, IE
does it happen for any PDF link, e.g. this? Yes, any link with a pdf extension
does it still hapen with the latest Reader version 10.1.4? Yes, just downloaded it last week and still the same.
Another thing I noticed is afer unsuccessfully trying to access the pdf link, the resulting blank page reads "Could not load Adobe Acrobat" (could not load plug-in).
I do have Adobe Creative Suite 3 installed, which of course provides for Adobe Acrobat; I'm not sure if there is a conflict there, but I might uninstall everything and then just try with Adobe Reader to see from there.
I hope some of this helps. I appreciate your efforts in trying to assist.
Cheers,
Vinnie.

Iview not opening in a separate Window

Hello Experts,
We have an Iview for approving/rejecting apprasials for Manager. The Iview Id is PddDirect. In order to open this iview in a separate window we have set "Launch in New Window" property to "Display in separate window". This Iview is assigned to a page and that page to a workset then this finally this workset is assigned to a MSS Role. This Iview opens in a separate window when accessed through MSS Role.
Once any employee submits his appraisal Manager gets a link in email to access this appraisal document to approve/reject.
[http://host:port/irj/portal/?NavigationTarget=ROLES://portal_content/com.ABC.ABCContent/com.ABC.HRSE1/com.ABC.iViews/com.ABC.PddDirect&DynamicParameter=ID=014D1089964C1400E2E10080000A104E240000X]
When manager clicks on the link to access document it opens in the Content Area of portal even though the property is set to separate window.
When the same thing is done by loging into ESS/MSS portal the same Iview opens in a separate window.
Could anyone put some light on the wierd behaviour of this particular Iview.
Thanks
Surender Dahiya

Hi Surendra
As you are telling when manager clicks on the link to access document it opens.
Can you try with changing the property of ["Launch in New Window" "Display in separate window"] of the Source iView i.e where the link is available also you can change target.
If iViews are assigned to pages change the corresponding page properties also. Make sure clear cache of the Iview and Clear history of browser and test the same.
BR
SS

Cannot install driver software for N8-00, Windows ...

I'm having a lot of trouble getting any Nokia software to work on my PC.
(This was the same for my previous Nokia 2730.)
The first time I connected my N8-00 to my PC, running Windows Vista 32, my PC worked out it was an N8-00 and a window appeared asking me to confirm AutoPlay settings - there was a checkbox (which I checked), but no OK button.
I could go to Start > Computer and see the N8-00 there though.
I opened the device and found the Ovi Suite Installer and tried to run that (because the downloaded version didn't work either - I'll start another thread about my troubles with Ovi Suite) but it didn't work.
I then removed the phone from my PC.
Now whenever I connect my phone to my PC Windows tries to install the N8-00 drivers and fails, giving me these messages:
"Found New Hardware - Nokia N8-00"
"Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
Nokia N8-00 USB Phone Parent
No such interface supported
If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Obviously not being able to connect my phone to my PC is very frustrating and restricts many of the features I wish to use.
Help in solving this issue would be very greatly appreciated.

Could someone of you resolve the problem about the connection of N8-00 to PC??
I have the same problem and I can't resolve it.
Best regards!!

ITunes (11) Store in separate window?

Hey guys,
can anyone tell me if it is still possible to open the iTunes Store in a separate window? I'm running iTunes 11. Thanks!

No, sorry, it's not.
Regards.

Launching the JIVE software in a separate window

Similar Messages

Maybe you are looking for