Line item id in Account document segment

Hai gurus,
I need a clarification on line item id.
It is used in Accounting document segment.
You can find it in table BSEG and field is BUZID.
Actually it has
A " Asset
B " Warehouse stock order
C " Warehouse stock order assigned
K " Vendor
F " Delivery costs
and others.......
(its quite similar to account type)
From where this value is picked.
Kindly help....
Regards,
Vimal

Based on the posting key ,
system will find whether the  particular line item is  which acount type ;
ex;
40& 50-S- -gl account
chandra

Similar Messages

  • Zero Value Line Item in the accounting document

    Hi Experts
    When I create an accounting doc from Invoice, system adds a new accounting line with 0 value and posts as below
    Itm   PK   Account     Account short text                 G/L acct short text             Tx          Amount
            50   50000000   Sales f/goods-Dome.             Sales f/goods-Dome.                            0.00
      1    01   1000           Sale within state                    Acc.Reble                                           50.00
      2    50   50000000   Sales f/goods-Dome.             Sales f/goods-Dome.                          50.00-
    The blank line has the same posting key, account# as the last line in the accounting doc but with 0 value. I tried to check VKOA and OB40 settings and found nothing which could cause this.
    We are using ECC6.0 and CIN. We are using only rounding routine, but other than that no routines are being used.
    Can some one guide me on how to go about this?
    Siva.

    Hi
    Check with the help of your FI consultant of you have Summarization at line item level active for Billing Document for Table VBRK. The path is IMG>Financial Accounting >General Ledger Accounting>Periodic Processing>Integration>Sales  & Distribution>VBRK Table.
    Herein check the if there is any summarization of any field.
    Regards
    Sanil K Bhandari

  • SD document line items Vs FICA accounting document line items

    Hello All,
    What is the interface we use in SAP,  between the SD and FICA which will determine line items in FICA document with regard to SD line items.
    SD : How we do configuration or mapping between sd sales order and billing document to determine billing document line items  based on sales order line items ( for example : material group, profit center, cost center ?)
    FICA: what interface / Configuration we use to determine how many line items should appear in the FICA document based on billing document line items.
    Regards,
    John.

    Integeration of SD to FICA is based on the img settings done under the node - SPRO - Financial accounting ( new ) - Contract accounts receivable and payable - integration - Sales and distribution .
    Creation of FICA document based on SD is routed through the event 4000 and the details are detrived through event 4030 .
    Would suggest you to go through events 4000 and 4030 .
    Regards ,
    Dewang

  • Change order of line items in a financial document

    Hello,
    Is it possible to define the order of the line items in a financial  document?
    For example, I have always a discount line with a discount account in the first place and after this line, the customer line, and the bank account and I need to have the customer line in the fist place, is it possible to customize this order?Or is this standard?
    Thank you very much!!

    Hi,
    You can change orders in FInancial Document. Just open the document from Menu select Settings-> Layout--> Current.
    change the position numbers as desired.
    Regards,
    JA

  • Maximum line items for one billing document

    Hello Friends,
      We have a business requirement to invoice 50000 line items in a billing document.   Could you please advice the approach to fulfill this requirement.   As per my understanding, there are some limitations for billing item and accouting document item.
    Appreaciate for your valuable inputs.
    Best Regards,
    Goutham

    Yes your understanding is correct.  It is not possible to achieve this requirement.
    You can also go through some of the threads where the same topic was discussed
    [accounting document limit 999   |accounting document limit 999;
    [Re: More than 999 line items in Invoice|More than 999 line items in Invoice;
    thanks
    G. Lakshmipathi

  • Document line item text in Clearing document

    Dear All,
    Document line item text
    My client want the vendor invoice line item text(BSIK-SGTXT) to be captured in the corresponding clearing document line item text field(BSAK-SGTXT).
    (i.e) The vendor invoice and its payment clearing document should have the same text in the document line item text filed.
    According to me i can use  a substition rule and a user exit to assign the values. but here comes a problem* i have one clearing document against 3 to 4 vendor invoice documents* so my programming logic has got stucked here? like which vendor invoice line item text the clearing document should pick up?
    is there any other enhancements possible or can some one help me with the programming logic to be applied here.
    Thank you
    Regards,
    Vasanth D

    like which vendor invoice line item text the clearing document should pick up?
    is there any other enhancements possible or can some one help me with the programming logic to be applied here
    Why don't you discuss the issue with your client?  As you said, if you pay 5 invoices in a single run, the payment document item text can't carry all of those texts unless you use the long text.  What is the reason for the requirement?  Perhaps there's another solution.

  • GL balance/line item by multiple account grouping

    I have around 200 expense accounts, I want to define GL account group or set,
    for example, I want to define fourty such GL group
    in FAGLB03 or FBL3N, we can only retrieve balance or line item by one account grouping and save as variants.
    is there any report or ways we can list down multiple account group balance or line item in one go?
    if I run FAGLB03  account group by group and list down period 1(Jan), period 2(Feb), period 3.....GL line item summarization figures it will take more than two weeks,

    Hi Siva,
    If i understand your requirement correctly, I think you can select multiple account groups from 'GL account line item display (FBL3N)' dynamic selection screen as shown in below screen.
    Regards,
    Prasad

  • PERNR - Personnel Number on vendor line item of the FI document Posting

    After posting a time sheet (PR05, PRFI, PRRW), the FI document created (display via FB03) has the personnel number on each of the GL line items, but the field is blank on the vendor line item.  Does anyone know how to get this to be populated with the same data as being populated on the GL line items (it's the same field BSEG-PERNR)?  I've made the field optional on the vendor reconciliation account as well as on the posting key, but no success yet.  thanks.

    Thanks all for responding. 
    The vendor master was populated.  The strange thing is that the GL line item gets populated but not the vendor line item in BKPF/BSEG.  We talked to SAP and to get the vendor line item to populate we would have to do an SAP coding change.
    I created a quickview (SQVI) between the appropriate tables to get the report out that we needed (a bit easier than an ABAP) - but nontheless it worked.
    thanks again.

  • User-exit to fill PO line item G/L account no. and other details

    Hi All,
    I am looking a customer function or a BADI to fill in the account number when PO is about to be created.
    My requirement is that based on some conditions account number in Account assignment tab for PO line item should be filled or overwritted if there is already a one selected, so that when user see the value for account number, it is the desired one.
    I tried with exit EXIT_SAPMM06E_006, which has the table TEKKN(account assignment for purchasing document) parameter but when I debugg it and assign some other value to TEKKN-SAKTO for the corresponding line item, I can see that changed value is not coming.
    Any clue?
    Regards,
    Mark

    Hi Mark,
    You can try implementing follwoing BADI's:
    ME_GUI_PO_CUST
    ME_PROCESS_PO_CUST
    Let me know if it helps.
    Gouri.

  • Link between SD invoice item and corresponding accounting document item

    Hi,
    I have a problem regarding the link between the items of an SD invoice ( or
    credit note ) and those of the corresponding accounting document. There's a
    custom report which extracts information about each credit/debit note
    produced within a certain period. This program has recently failed due to a
    particular case: a credit note was generated starting by two note requests;
    in other terms, cardinality: 1:N exists between the credit note and the
    request document. Currently, the program generates duplicated records in
    this case, because of the following schema:
    -> main loop on VBAK data ( request document header data )
       -> inner loop on BSEG data ( accounting document items );
    our current access criteria in reading tb_bseg is only:
    ... where tb_bseg-belnr = tb_vbrk-vbeln.
    Providing that tb_vbrk-vbeln doesn't differ and that both tb_vbak and tb_bseg
    contain two records ( the two requests the first and the two accounting
    document items the second ), the program fails as follows:
    ° first request  -> two lines
    ° second request -> two lines.
    Is there any way to link each invoice item with the corresponding credit
    note item?
    Thanks in advance to all of you.
    Adrian.

    Hi,
    I have a problem regarding the link between the items of an SD invoice ( or
    credit note ) and those of the corresponding accounting document. There's a
    custom report which extracts information about each credit/debit note
    produced within a certain period. This program has recently failed due to a
    particular case: a credit note was generated starting by two note requests;
    in other terms, cardinality: 1:N exists between the credit note and the
    request document. Currently, the program generates duplicated records in
    this case, because of the following schema:
    -> main loop on VBAK data ( request document header data )
       -> inner loop on BSEG data ( accounting document items );
    our current access criteria in reading tb_bseg is only:
    ... where tb_bseg-belnr = tb_vbrk-vbeln.
    Providing that tb_vbrk-vbeln doesn't differ and that both tb_vbak and tb_bseg
    contain two records ( the two requests the first and the two accounting
    document items the second ), the program fails as follows:
    ° first request  -> two lines
    ° second request -> two lines.
    Is there any way to link each invoice item with the corresponding credit
    note item?
    Thanks in advance to all of you.
    Adrian.

  • Free of charge po line items for all account assignments

    Dear All,
    Is there any setting by which for all account assignments/item category combinations, I should get option to create free of charge PO line items, irrespective of the preceeding documents through which I prepare PO (from PR).
    I have checked in account assignment configuration and didnt find any fields that favor the setting.
    Please let me know if there is any customization setting for above requirement.
    Best Regards,
    Krishna

    Hi,
    The 'Free Items' indicator in the overview is only used to facilitate               
    the switching off of the Inv.Receipt flag and the GR-based IV flag.                 
    Note that the 'Free Items' indicator is not stored on the PO item                   
    table EKPO.                                                                         
    The Inv.Receipt flag (and the GR-based IV flag) are the fields that                 
    really controls if an item is 'free' or not.                                        
    So, the field is initiated based on the values in those fields rather               
    than from input from the user.                                                      
    When an invoice is expected it's not a free-item. This indicator 
    invoice receipt is chosen from the main-item and also from the          
    customization maintained for item category 0 in table T163.  
    I am afraid that I have to say that in standard SAP design                   
    it is not possible to default the "Free item" flag.   
    Regards,
    Edit

  • Different profit centers in 2 line item of a FI document

    Hi Experts,
    In FI document posted from billing has got 2 different  profit center on each line item,  I would expect to see same profit center on both line items,  can you please advise why they are different. We are working on 4.7 and no concept of document splitting in our case.
    If this is correct can you please explain me the concept behind this.
    Thanks in advance.
    Shilpa

    Dear Experts,
    I am taking about billing document which got posted and do you still think that it is because of the cost center?  I have checked OKB9 settings they are in place.
    But here in our case Dr entry is to customer account with different Profit center, Cr entry is to Sales account it has different Profit center. But one Profit center is coming from Material Master but not clear on the other Profit center.
    Thank you.
    Shilpa.

  • Can't modify line item text in financial document

    Dear all,
    In some cases I'm not able to modify line item text field in financial documents, and I don't know why.
    I've checked customizing and BSEG-SGTXT appears as modificable field in any case.
    As far as i know text field is not a relevant field, so the system should let me modify it if the customizing is right.
    Does anyone know if there could be any other customizing that affects this transaction (FB02)?
    Thanks

    Hi
    Since you indicated the entry is from goods receipt, I understand that you are trying to change the line item text in a GL line item.
    If so, please ensure the following:
    1. in OB32, for Account type S and Field name BSEG-SGTXT, the trasaction type is blank, "Field can be changed" is ticked and "Posting period not closed" and "Line item not cleared" are not ticked. 
    2. In OB32, for Account type S and field name BSEG-SGTXT, no other entry is there along with company code which has a different rule.
    3. You can enough authorization to change the document.
    4. If you can change the text, but cannot save it, then please check whether any validation/BTE is in place which is not allowing to do so.
    Regards

  • Need some help on workaround for more than 999 line items in a FI document

    Hi all,
    user would like to know if there is any way to increase the maximum # of lines for an FI document. Currently, as SAP only allows 999 lines per FI document. The user is encountering an issue when a taxable invoice is uploaded because SAP creates additonal lines for the taxes thereby increasing the line item count beyond the 999 limit. This causes the user to separate out the upload files into several different files which is very time consuming. i have read some replies from previous questions posted on this but none were clear enough on how to actually split the lines and what will happen after the split to the rest of the line items how is the continuation with the first document. can some one give me the explanation or steps on how we can do the split on this document please. we are on 4.6c version. if we have to write some code, what should i explain to the abaper? any kind of inputs would be greatly appreciable.
    Thanks in Advance
    Jay

    Hi,
    From your comments, I understand that you are uploading the journals.  The steps to handle 999 line items limitation is through functional and technical help.
    1. create a dummy GL account
    2. In the code, ask the abaper to have a logic such that if more than 900 lineitems (dont check for 999, as some auto postings will be done), then the balance should be loaded to the dummy GL account created and a document should be posted
    3. Start reading the remaining docs and follow the same logic as in 2 and ensure that the posting happened in step 2 against dummy GL account should have reversal posting.  That is, if step 2 dummy GL account has a credit balance then in step 3 against the same amount a debit entry for the GL account should be posted.
    This will ensure that once all the line items are posted, the balance in dummy GL is Zero.
    Regards,
    Sridevi

  • GL Line item not show reverse document

    Hi Guru !
    I have problem about GL account that assign account management to be line item  so when post entry and reverse entry by use this GL account ,when I see report on t.code FBL3N-GL line item ,they did not show indicator of reverse entry so it difficult to check so I would like this report to reverse indicator or there are some report that can show it . thank you very much.
    Bluesky

    Hi,
    Check the Layout of FBL3N Report
    1. Change Layout Ctrl+F8)
    2. Add the Reversal Indicator field
    3. Save the Lay out settings
    Check the Reversal Indicator. If any Key is there It means Reversal document.
    Hope. Your problem solved.
    Regards,
    Kishore K

Maybe you are looking for