Line level Order type by Oracle iStore

We have requirement to have different order types at line level based on item Ordered. Is it possible without customization such that...
Order Header Order type = Standar Order
Order Line Order type -
Line 1 - Billing only order type
Line 2- Standard Order type.
Appreciate your help.

thanks for reply. We are on 11.5.10.
Does any one confirm where the Order type is being picked for iStore? is that from customer set up or ASO: Default order type profile at responsibility level?

Similar Messages

New order Type setup in Oracle Apps 11i

Hello All,
I setup a new order type for a new organization. When i want to select 'Invoice Source' for the order line type in 'Transaction Types', I see nothing in the list of values.
The Invoice Source is already defined and is working for other order types for existing organization units.
Regards
AM

Thanks for your response.
A transaction type (INV) is already defined in AR. This is what is assigned to an existing organization. I set up a new org and am trying to create a new order type for this org.
Here is what I am doing:
1) In order Management--Setup , created a new Transaction Type (New_Line). Transaction Type Code is Line, order Category is Order. The Sales Document Type defaulted to 'Sales Order'
2) Then i defined a Transaction Type (New_Order) and assigned the Line Flow (order type --->New_Order, Line Type-->New_Line, Process Name ->Line Flow - Generic)
I am running into two issues.
1) Can't assign the Invoice Source to the New Line Type I just defined; and
2) When I book an order, I get "No workflow assigned ..." Error.
Am I missing anything,
Thanks
A/M

Please enter required information - Order Type

Hi,
In istore while clicking on the 'Place order' button i get the following error.
Error messages from Order Management
Please enter required information - Order Type
There is an error in order submission.
1.I haven't set the ASO Default Order Type at application(istore) and responsibility level(ibe_customer).
2.ASO: OM Defaulting is set to Yes at site,istore and IBE_CUSTOMER responsibilities. But in Default Sourcing Rules,there is no record for default order type.
If i set the profile option or create a record in with a default order type, I won't be able to change the order type in order management(because of the procesing constraints), once it is placed in istore.
The requirement is to default the transaction type(order type) based on the ship to address selected.How can i achieve this?
Thanks,
Nithya

Hi,
Run concurrent program Import orders and completed normal, but i got error and able to see in corrections .. 'Please enter required information - Line Type'Review the following documents and see if it helps.
Note: 371877.1 - Order Import Failing With 'Please enter required information - Line Type.'
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371877.1
Note: 788860.1 - Retrobilling Order Creation Process Errors Out 'Please enter required information - Line type'
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=788860.1
when i tried to enter Line Type .. Goods in the tab page and validate... it is not accepting errored out.What is the error?
Regards,
Hussein

Availability check box at schedule line level and requirement class level

Hi All
What is the significance of availability check field at schedule line level and requirement type level.
If I remove the check box at schedule line level, then there won't be any availability check carried out in the sales order, even though in requirement class it is checked. Is it for doing availability once the requirement is passed to MRP...
In make to stock scenario, no availability check is active at schedule line level.
scenario 1. stock is 0 in plant, when i place an order for 10 quantity, does system give any confirmed quantity on so and so date...or the confirmed quantity will be zero or as there is no availability check carried out, it confirms 10 quantity on customer requested delivery date and the time of creation of delivery, it gives an error message stating zero quantity is available. which one is correct in all the above.
In make to order scenario, no availability check is active at schedule line level.
order was created for 10 qty, as there is no availability check active, does the system give some date based on the lead times maintained in the material master or not?
Regards
Sree

Hi sreekar
The significance of availability check at schedule line level is to determine weather availability check and TOR should be carried out for sales orders or not.
If you remove check box at schedule line level , availability check and TOR wont be carried out at sales order level.
Coming to the scenario you said , make to stock , i think the availability check you are using is 01 make it 02. which is planned requirements. and stratergy group as 10. in MRP3 view in MMR. .
as the availability check u have put 01 & stratergy group as 10 availability check doesnt carry
coming to the scenario 2 , if the stock is 0 in plant and if you create a sales order, then the confirmed quantity should be 0 and that particular order will go to backorder processing.
sometimes it confirms the ordered quantity as the confirmed qunatity, and it gives a confiremed delivery date on which the stock is confirmed , but that date is a tentative date.
all these unconfirmed orders will go to backorders. once the qunatity is confirmed automatically , delivery date also will be done
Coming to scenario 3 , when you create MTO order there will be availability check checked at the schedule line level. can you tell wat is the schedule line you are getting is it CP or ND?
for schedule lines , ND - no availability check will be there , PD - availability check will be there
Note: plz check 1st the availability check you have entered in MMR , if it is 01 make it as 02. and then run these cycles.
Reward points if useful and if Any queries let me know
Regards
Srinath
Edited by: sri nath on Mar 21, 2008 7:53 PM

How to compare the variances of production order type and get report

Hello All,
I want to compare the variances of production order type wise.
for ex. i want variances of order type PP 01 and PP 02 in a single report.

Hi Sachin,
You have to maintain summarization hierarchies to achieve this.
1. Maintain summarization hierachies with hierarchy level - order type in the t.code.KKR0
2. Generate the hierarchy in KKRC
3. Run the report KKBC_HOE
Regards,
Mukthar

Manual override option for Unit selling price in Order line level.

In OM R-12
Our client wants manual override option for Unit selling price in Order line level.
But there is no solution available to fulfill this requirment. To be able to manually override the price on a Sales Order line you
must have defined a manual modifier that qualifies for the Sales Order line in question. Without a suitable manual modifier the price cannot be changed.
This is current standard functionality.
Anybody can give some suggestion/workaround to override selling price in Order header level without using the modifiers.
regards,

Hi Kashif,
I'm finding it little difficult to buy Oracle Support's feedback with regards to R12 functionality for direct List Price update without using any modifier (manual or whatever). After all it is Oracle's product and they should know better. But test results in Solution Beacon's Vision 12.0.6 instance (http://www.solutionbeacon.com/tools_r12vision.htm) and documentation updates in R12 (R12.0.4) OM user guide & implementation manuals potray a different picture.
After your last post, I did a test in Solution Beacon's Vision 12.0.6 instance with following details:
OM: List Price Override Privilege = "Unlimited Access" at user level
OM: Discounting Privileges = "None" at user level
No manual modifiers defined and Order status = "Entered"
I could display the "List Price" field from folder under Line Items >> Main tab, override the list price to a new value and save. The unit selling price showed the new value based on updated List Price as soon as I tabbed out of the list price field after overriding. After saving it showed the new selling price. _Please note that under Line Items >> Pricing tab there is another "List Price" field and that is not editable_. For such overrides "View Adjustments" (from Line >> Actions) will not show any adjustment details as it is a direct update of list price.
Also please note that, if "Enforce List Price" checkbox is selected for the order type, the list price cannot be overridden even if the profile option is set to "Unlimited Access".
Document References:
Oracle® Order Management User's Guide
Release 12, Part No. B28099-03, September 2007 >> R12.0.4
Page No. 10-74
+Note: Note: If any order line for an order has the Calculate Price Flag value equal to Partial Price or Freeze Price new order level adjustments will not be applied or allowed to be overridden. _The profile option OM: List Price Override Privilege controls your ability to override the unit list price. If you have this profile set to Unlimited, you may modify the unit list price by editing the current value displayed_. The original list price is saved in a hidden folder field, so you can display it if necessary+.
Page No. 10-94
User Procedures
_A new profile option, OM: List Price Override Privilege controls whether or not you can update the List Price_. It is enabled and updated at the application, responsibility and user level. It is not user visible and updatable. The values include+:
- View Only: This is the default value. If set to this value, the current behavior is retained, which means unit list price field is protected.
- Unlimited Privilege: If set to this value, you can override the unit list price field from the main tab and immediately see selling price adjusted accordingly.
To use Override List Price:
+1. Navigate to the Sales Orders/Quick Sales Orders window.+
+2. Enter the header and line information, including the ordered item and quantity, then tab to the next field. The Selling Price and List Price display+.
+3. If the profile is set to Unlimited Privilege, you can enter a new list price in the List Price field. You can either proceed to the next line or save your work+.
+4. You can see the new, entered list price, and if there are automatic discounts applied, they will be based on the new list price+.
+5. If the folder has been modified to show the Original List Price, the original list price displays+.
+6. To change the List Price again, go to the list price field and enter a new value, replacing a previously entered value. If Audit Trail is enabled for List Price and a reason is required, a window appears to enter a reason and optional comments+.
Note: Subsequent overrides of the List Price, after the order line is saved, can be captured by Audit Trail, depending on the setup of Audit Trail (entered or booked state) and any processing constraints that have been set up.
In the OM Implementation Manual also there are notes related to this.
OM Implementation Manual
Release 12, Part No. B25975-03, September 2007 >> R12.0.4
You can refer to page no. 2-59, C-4 etc.
Thanks
Supro

Different order type to use for iStore

Hi,
We have 2 sites as per OU1 and OU2.
Set ASO: Default Order Type to IBE_CUSTOMER_1, IBE_CUSTOMER_2.
Now if we want to use more than this order type what we need to do apart from creation of new responsibility.
Thanks,
Ashish

Hello Ashish,
For release 12, the order type is now a Quoting Parameter which is setup at the OU level and not responsibility. However, there is a new iStore profile option introduced, "IBE:Default Order Type" which can be set at the User, Application or Site level. To get this profile option you need to apply Patch 7042892:R12.IBE.B - "R12: ASO: DEFAULT ORDER TYPE NOT AVAILABLE BY RESPONSIBILITY".
**Please note that the patch does NOT allow profile to be updated at Responsibility level. This is a MOAC limitation.
As per MOAC mandate, profile options at the responsibility level that are dependent on the operating unit have to be removed, or not supported at the responsibility level.
References:
R12: Is It Possible To Control Order Type by Responsibility Or Minisite Id in Oracle iStore ? (Doc ID 833163.1)
Regards,
Debbie

Order Type in iStore R12

Hi all,
I'm getting the following error message when I try to place an order in iStore R12. Can anybody help me to fix this?
Error messages from Order Management
Please enter required information - Order Type
There is an error in order submission.
Thanks in advance,
Sreelesh
Edited by: sreelesh on Jul 2, 2010 11:04 PM

Hi,
Here is the direct link:
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=293145.1
You need a valid "My Oracle Support" username/password to access this document.
Please note that posting the contents of MOS documents violates Oracle support agreement policy.
Thanks,
Hussein

AME Line Level Approval -- Oracle Quality

Hi All,
In Oracle Quality module I have create one parent plan and a child plan is associated with it. After multiple lines are entered in the child plan (Approver details is stored as one of the collection result in this plan) and later when the parent plan is saved, line level AME approval based on the approvers in the child plan should initiated. The final e-signature status should be at the header level, such that once all the lines have been approved i.e. parallely approved, the header record status should change to "APPROVED".
I had tried the header level approval approach, but in this case the approval flow for approvers could be done, but the only issue is that it was done serially.
Is there a way to achieve this in AME? Kindly help.
Thanks.

Apologies for the late response, have only just spotted the question.
You will need to register "line-item job-level chains of approval" under payables transaction type before you can select it from the picklist:
Setup\Action Types\"Use Existing Action Type" button, then select action type and continue.
Hope this helps (if you haven't already resolved yourself)
James

Reg: Sale Order short close at Schedule lines level

Dear Gurus,
Requirement is to close all open schedule lines beyond one month.
In detailed. User Enters Manual Schedule Lines as per the requirement of the customer say for 6 months.
for Eg . Sale order entered on 1st of august to Dec with 500 qty, schedule 100 qty/Month, manually in sale order.
Now if business delivers only 90 out of 100. they need to short close that particular schedule line only not the entire sale order or line item. I tried with Delivery block at schedule lines level. but it is not working.
If any one has come across this scenario please share with me.
Regards
Praveen

If we apply a delivery block the pending qty will automatically add to the last schedule date. Ex. if there is 3 dates in the schedule lines, and there is some 50 qty pending in second date, and if u apply delivery block it will carry forward that pending 50 qty to the third schedule line and adds up with it.
But in my case i just want to close that pending 50 qty in second line item.
Regards
Praveen
Edited by: Praveen_PG on Sep 15, 2011 1:28 PM

Table which contain Purchase order number, PO line item, PO type

Hi experts,
Can you please tell me which table contains the fields Purchase order number, Purchase order item number and purchase order type with respect to the fields of the table MKPF--MBLNR.
I am given a conditon where i have to select MBLNR, VGART, BLART from MKPF and after selecting these line items, i have to validate for purchase order of type ZSPM,ZSFIAND ZINS.
Can you any one suggest me what shall i do... Thanks in advance.
Regards,
Buvana

Passing MKPF-MBLNR to MSEG
get the EBELN (Purchase order).
Pass this EBELN to EKKO to get Order type (BSART)
and to EKPO to get the line item.

OM: Apply Hold after new a order line on line level..

Hi All,
There is an issue that we have to apply hold on line level when order is changed.(include update line or new line)
And we try to use trigger(with PRAGMA AUTONOMOUS_TRANSACTION) to call Apply Hold API.
It work when existed order lines are changed.
But it not work when new a order line, at the after-insert moment, it CAN NOT apply Hold on this immature order line.
How can we fulfill this requirement?
Or the requirement is nonsense...
Any suggestion will be appreciated.
Best regards,
Zhxiangl

R U going to use any bapi to split the line items???

Removing line level info from shipping info page in istore

hi,
we r in 11.5.5. i would like to remove the line level info appearing in the shipping information page in istore.how can i do this?
thanks & regards,
Nithya

as per Apple specs, 17" DL has "Combined optical digital input/audio line in (minijack)"
http://support.apple.com/kb/SP38
maybe the level issues related to the line-in being digital vs analog on your previuos PowerBook

Enabling Points in order line level

Hi Friends,
The Requirment is like this..
If a new system order is booked by sales Administration, i have to validate to check if part number,quantities and enabling points combination should be valid.
But i don't know what is the enabling points in Order Management.
Can any one tell me what is the enabling points in order line level .
Thanks in Advance.
Shravan Kumar Kota.

Hi Friends,
The Requirment is like this..
If a new system order is booked by sales Administration, i have to validate to check if part number,quantities and enabling points combination should be valid.
But i don't know what is the enabling points in Order Management.
Can any one tell me what is the enabling points in order line level .
Thanks in Advance.
Shravan Kumar Kota.

Sales Order - Line Level Information in Info cube

Hi BW Guru's,
We are using the following scenario: -
Info cube = Sales Order Line level information (yes, we want to capture the product level sales order information in info cube for our internal reporting purpose)
ODS = NO. we are not using the same
Info Source Same as data source (standard one)
Data Source 2LIS_11_VAITM (standard business content data source for sales order information)
Delta in above data source = contract related information (5 extra fields) working fine added as append structure in the data source
Extractor = Standard using SBIW - Perform setup - SD Sales Order (SD 11)
Number of Sales order line records / month = 80,000
Historical Sales order data to be uploaded = 1 year = 80,000 * 12 = Nearly 1 Million records
Hardware Configuration = 4 * 750 MHZ, 8 GB RAM
Please advice on the following things: -
1) How long it will take to upload 1 million records in BW?
2) Does our server capacity sufficient enough to take 1 million load?
3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
Waiting for your reply.
Thanks
Rajiv

Hi Rajiv,
1) How long it will take to upload 1 million records in BW?
This depends on your network, on the width of your data record, the performance of your machine, on the settings for communication between BW and R/3 ....
It can be done in 2 hours, in 3 hours, it can take a whole day. There is no exact answer possible.
2) Does our server capacity sufficient enough to take 1 million load?
If your disc space is enough, no problem. If you already loaded your master data, there is not too much space necessary to load the transactional data.
3) Which delta procedure should we follow for day to day Sales Order line level data updation? Please advice on data selection procedure.
Just run your initial setup and initialize your delta. Run a daily delta package (this is what most companies do).
4) In case, last month Sales Order is changed, how to reflect the same in our info cube? Please suggest the suitable method.
The extractor takes care about this, just post the delta to your cube, that's it.
Hope this helps,
regards
Siggi

Line level Order type by Oracle iStore

Similar Messages

Maybe you are looking for