Listing WBS elements and object relations

Hello Friends,
I want to output all wbs-elements and attached objects in a list, but I'm not sure how to do this. Is there a standard report for this? In trans cj03 you can only se the relation between one wbs-element and its related objects... I want to view them all. I considered to make a report with quickviewer but I am not sure which tables to connect, as the data-fields in transaction cj03 only reffers to structure fields... I would appreciate any input...
best regards
Ballo

Hi Robert,
Check out the conversion routine attached to the WBS element, and you need to add code in your program to convert it before downloading.
If no conversion exit is available, you need to write code to select its mapping from database table.
cheers
swastik

Similar Messages

WBS Element and Service No Link Table for Purchase Order document

Hi Experts,
We are Facing 1 Problem for finding link between
WBS Element and Service No for corresponding Purchase Order document . Please Suggest me to find Related tables for Project system Module .
Thanks and Regards
BalaNarasimman.M

Hi,
The link will be in MM table, not PS table. Try EKKN.
Regards

WBS element and Cost Center

Hi Gurus,
As far as I know, when the a/c assignment category is P in a PO, the costs are assessed on the cost object WBS element and when the a/c assignment category is K in a PO, the costs are assessed on the cost object cost center. But, as I drill down a WBS element, I find Requesting and responsible cost center.
So, can I say that a WBS element is actually a child of the responsible cost center ?
And all the costs assessed on a WBS element are eventually assessed on the responsible cost center?
Please help in clearing my concepts.
Thanks,
Kumar

hi,
You assign the account assignment to WBS element based on the OPERATIVE INDICATOR...
By this you specify the attributes of a WBS element and determine which tasks the WBS element can carry out in the project...
Please check the LInk given for futher explainations:
[WBS ELEMENT|http://help.sap.com/erp2005_ehp_04/helpdata/EN/4c/225e2a46e611d189470000e829fbbd/frameset.htm]
check the table given at the bottom...
Regards
Priyanka.P

How to populate WBS element and Project definition in Additional Tab

Hi,
I have a 2 requirements
1) we need to populate WBS element and Project definition of an order in PM
IW 32 trasnaction (Additional data tab).
2)Also i need to program settlement rules in CJ02 for WBS elements .
How do i approach ? when i do manually it is taking the values in IW 32 when the status is released.
So i think first we need to chnage the Status from Created to released and then start working on step 1 and Step 2
Kindly suggest.
Thanks,
Pradeep.

Problem one solved ......
Basically we need to put the status of WBS elememnts and then write a BDC for additional data tab.
Looking into issue 2......

Would like to create a script for list all elements and structure of an indesign document

Hello everybody,
I'm a very beginner in indesign scripting.
I would like to create a script in order to list all elements and the inner structure of a n indesign document.
The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
The output document could be an xml or txt document with a treeview structure.
I would like have a rough idea of which kind of javascript code I should use for that.
Thanks for answers.

Hi Ossydoc,
You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select " link to File " in the hyperlink option and link to those Mp3 files.
Please refer to this screenshot :- http://prntscr.com/4xvdup
Now, when you publish your site, Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
Hope this helps
Regards,
Rohit Nair

PS-Relationship between the system status in wbs elements and activities.

Relationship between the system status in wbs elements and activities.
We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
Thanks in advance.

Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha.

WBS Element and it's associated Employees

Hi All,
In CJ20N, we will be allocating Employees to a WBS Element.
I would like to know from which table, the WBS element and its Employees can be retrieved?
Regards
Pavan

Did you try with the infotype table PA0027 - Cost distribution infotype. Or you can check in PA20 and infotype number 0027.
Here the WBS elements will be assigned to the employees with their % of allocation.
Hope this helps you.
Regards,
Subbu

List WBS elements in alternative way???

We currently have several WBS structures developed. Is there away to construct an alternative WBS structure that will allow me the ability to use several uncommon WBS elements and roll them up? Would a network accomplish this? would I have to construct a specific variant to get only those WBS elements I want? Any suggestions would be appreciated. Thanks.

not sure what you want, but it is unlikely that is possible in Std SAP
you will need to use specific templates

Products, list of elements and XML in Indesign

Hi,
I want to do something with XML in Indesign, but I can't find the solution
I have a list of product, and each product is composed of multiple elements, just like that :
A product can be made for exemple like that :
Product 1    : - P2O5 : 23 g/L
                    - CaO : 1,2 g/L
                    - Zn : 3,2 g/L
Product 2    : - N : 4,3 g/L
                    - MgO : 2,2 g/L
I want only elements (when I say "element", I want to say Chemical element) that have a face value when I import my XML, and not the other (for exemple, not the term "B", "Cu", ...)
My XML has the value of the elements (for exemple, 23 g/L, 1,2 g/L) but not the term "N", "Cu", ... (it's a static text, directly typed into an anchored object in Indesign)
I want the term "P2O5" or "CaO" to appear only when there are a face value, but disappears when there are no face value.
And I want the elements not to be too spaced one to each other (for exemple, if there not N, P2O5 and K2O elements in my product, the term "MgO" and its value reach back instead of the term"N" (see in my picture above)
For exemple, in this picture (done manually), there is too much space before "CaO : 560", and between "CaO : 560" and "Mn : 8,8"
So, how can I create a document into Indesign with XML (much like in my exemple), wich generates list of products with differents elements that appear or disappear according to their values?
I don't know if my XLM tags are right or not, or if I use the right strategy with anchored blocks instead of a single block of text, but I don't find the solution!
Can someone help me?
I work on Indesign CS6, on Windows 7.
Thank you,

Hello Fabien,
I have had a chance to look at the files. I am a bit uncertain about something. Is the table a design element, or do you want the data in a table?
If you do not want the data in a table, let me know.
If you do want the XML in a table, there are a couple means of achieving that. I don't know how big this publication is going to be, and so the answer sort of depends upon that. So a general "rule" I follow is:
For product data sheets or publications of say 12 pages or less, I will simply arrange my XML so that the data is in rows with the data that will be in a row's cells separated by tabs. I will typically bring in a small amount of data, create the table and create table and cell styles for quickly formatting the data into tables once inside ID. I use the Text to Tables feature for these, then apply the table style(s).
For a bit bigger publication, I will create a CALS table structure in the XML and do the same as above as regards applying table/cell styles.
For a large publication where manually going through and applying the table styles would be onerous and or there are several table styles I would need to use, I *might* take the time to wrap the XML table data in an ID table structure. To see what you would be up against, create and style a table and export it out as an XML file. This, to me, is only worth doing on a really large file that perhaps includes several styles of tables.
Using your example XML, it would look similar to the below. Depending on your text editor, it doesn't take too long to use the search/replace function in a good editor to do once you know how it needs to be laid out and your familiarity with the editor. I began with importing your XML into Excel rearranged some data, exported back out to XML and cleaned it up. I don't know where the data you have is coming from, but if a database of some sort, likely most of this could be done with the export from Access, the SQL, etc. I try to get whoever is providing the XML to get as close as possible to what I need, which takes working with them. But it saves time on my end.
<?xml version="1.0" encoding="utf-8"?>
<stuff>
<table>
<tgroup cols="5">
<colspec colname="1"/>
<colspec colname="2"/>
<colspec colname="3"/>
<colspec colname="4"/>
<colspec colname="5"/>
<thead>
<row>
<entry>Produit</entry>
<entry>Composition</entry>
<entry>Forme</entry>
<entry>Cultures</entry>
<entry>Doses</entry>
</row>
</thead>
<tbody>
<row>
<entry>Produit1</entry>
<entry>560 g/L
8,8 g/L
2,6 g/L</entry>
<entry>Texte Forme
Texte Formulation</entry>
<entry>Texte Cultures</entry>
<entry>Texte doses
Texte application</entry>
</row>
<row>
<entry>Produit 2</entry>
<entry>10 g/L
50 g/L
10,2
27 g/L</entry>
<entry>Texte forme 2
Texte formulation 2</entry>
<entry>Texte cultures 2
Texte doses 2</entry>
<entry>Texte application 2</entry>
</row>
</tbody>
</tgroup>
</table>
</stuff>
Take care, Mike

WBS element AND project

All,
This is my question.
1 WBS Element can be assigned to multiple projects ?
I have seen in table PRPS table WBS Element is only the key field , But it related PROJ using the field PSPHI .
In that case it means there will 1 WBS Element can be assigned to multiple projects ?
a®

Dzed,
Thanks for your reply.
I am little confused in that,
I have custom table that only one key as WBS, and i need to link WBS element to project . So this part i little confused about the Multiple project thing.
You cleared my doubts
Thanks
a®

Can PIR created at wbs element and MRP area of storage location level

Hi,
I tried to create an planned independent requirement at MRP area and WBS element level, but failed. The MRP area is not plant level, but storage location level.
*When trying to create account assignment category Q for it, then there is an error message saying:*
**only stock requirements are allowed when planning at MRP area level.**
Does it mean it is not possible to create planned independent requirement for this case?
Thanks!

Select the "Issue storage location" as '2' here:
spro -> production -> material requirement planning -> mrp groups -> overall maintenance of mrp groups -> overview -> mrp control parameters at material level -> (field) Issue storage location selection
& make sure:
1. In the BOM issue storage location is blank for the components
2. For the FG products , in mrp area prod.storage loc is maintained
3. Components are extended to the mrp area.
Pl. revert with the results

Report with cost center, Wbs element and cost element

Dear Experts,
I am creating Income Statement report with report painter using table CCSS.
In this report, I need cost centers, cost elements/ GL accounts and WBS elements.
Report is okay except sales. Because my cost elements for revenue are created with the category "11", it is not showing in the report.
Please suggest what changes to make to get sales revenues in the report.
Thanks

Hi Simi
Structure CCSS of Report Painter is combination of several tables including COEP
Even your revenue should have been updated in COEP table...
May be your report's selection conditions are preventing the revenues from being displayed... Can you check that?/
Also, you can build this report from FI Structures
Br, Ajay M

WBS Elements and Asset Under Constructions have different Cost Centers

Hello Experts,
We have created a WBS element in one of the projects.
As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
I have checked the settings like automatic account assignment, etc but all settings look correct.
Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
Thanks in advance
Leena

Thanks for your replies...
@ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
@ Abdul - Please elaborate more on Validation and Substitution.
Regards,
Leena.

Report:actual costs:statistical wbs elements and assets assigned to them

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

Thanks for your reply but this is not the question.
The question is:
Example:
I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
I post lot of invoices in each asset.
I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
Thanks and regards,
Miguel

WBS Element and functional area/location

Hi All Gurus here,
Can a WBS element link to functional area/location(object in PM)? or the other way round, which functional area/location link to WBS element?
Best Regards,
Elvio

Dear Elvio,
Please go through the information in the link,reward if useful.
http://projectsystems.wordpress.com/
Regards,
Naveen Dasari.

Listing WBS elements and object relations

Similar Messages

Maybe you are looking for