LMDB lock at Solution Manager 7.1 SP03

Hello everyone,
During the configuration of Solution Manger 7.1 SPS03 on Windows srv 2008 r2 SP1 x64 with DB2 LUW 97.FP4 we have an error after synchronization between SLD and LMDB.
When we check ABAP runtime error (ST22), every 10 minuts the same error occur:
A write or change lock was set on a transactional ABAP shared objects
area and it has not yet been removed.
Since the content of such areas should be synchronous with the database
no open write or change locks may exist at the time of a database
commit.
In this case the lock is on:
Area "CL_LMDB_MODEL_SHM_AREA",
Client " ",
Instance "LDB:0000000000".
The lock was set at the following position:
Program "CL_LMDB_MODEL_SHM_LOADER======CP" (Version 20100705094154),
Code offset 100."
We check also tx. [SHMM:|http://pokazywarka.pl/wfoimn/]
I have changed ABAP parameter (abap/shared_objects_size_MB set to 400) in instance profile, but not help.
When I login to LMDB administration info is displayed:
LMDB Performance Indicators
Error occurred while detaching to LMDB Shared Memory
Namespace table LMDB_P_NAMESPACE contains several entries for value active.
LMDB Shared Memory Error CX_SHM_NO_ACTIVE_VERSION:The lock on the instance for area LDB:0000000000 of namespace active occured.
Any ideas, how to resolve the problem ?
Best Regards,
SAPFan

Hello SAPFAN,
The shared memory related runtime errors are a side-effect of
inconsistent entries in table LMDB_P_NAMESPACE. These inconsistencies
are caused by bug that has been fixed with SAP note 1638659.
If this note is already on your system the entries in LMDB_P_NAMESPACE must have been created before that time, in which case they can be fixed manually, but should be done by an expert, and I would recommend you open an message on SV-SMG-LDB if this is the case. Otherwise SAP Note 1638659 should address.
Regards,
Paul

Similar Messages

How to Lock an entire Project in Solution Manager ?

I am trying to lock our project baseline in Solution Manager. I have locked at the highest structure node, but have noticed that there are lock options on each business process and/or process step and they are 'unlocked' even though I locked the highest level node in the business process hierarchy. Surely I don't have to individually lock each one. Any suggestions?

Hi
goto solar_project_admin tcode
choose your project and goto change mode
goto scope tab Chosse the tick Edit Structure
if you also want to lock maintenance of admin tab etc then you can choose the second tick also
this will disable changes in solar01 for project hierarchy creation.
Hope it resolves ur query
regards
prakhar

Solution Manager 7.1 upgrade,j2ee_admin is locked

Hello ,
I am in the middle of solution manager 7.1 upgrade and running into execution phase now. but my j2ee_admin password is locked.
I want to unlock and reset the password but this is what happening .:
1. I try to login with old j2ee_admin password but it is not correct.
2. I re-check with updating same to configtool but no luck
3.I have enabled emergency SAP* ID and can login to Visual Admin so
4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as Application error occurred
during request processing
Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
Please help me so that I can move ahead with upgrade
Thanks,
Supriya

Hi Supriya,
Hope you are doing good.
What is the status of the upgrade; is the UME still ABAP ? If so just login to the backend ABAP server/client and unlock j2ee_admin.
Else login to visual admin and there is a security provider in the services where you can unlock the user.
Hope this helps.
Kind Regards,
Hemanth
SAP AGS

Solution Manager 7.1 Upgrade: Problems during LMDB Setup

Hi,
we upgraded our Solution Manager 7.0 EHP1 development system to 7.1 SPS3 (including all new sap notes).
During solman_setup we get the following error at -> System Preparation -> 6 Prepare Landscape -> 6.4 Set up LMDB:
No such namespace: "active"
Due to this error it is not possible to add a synchronization connection between our local SLD and LMDB, because there's no target namespace!
Does anyone know how to add the namespace "active" ??
Greetz
André Richter

Make sure that your SLD meet the requirements:
SAP NetWeaver Release
The following table gives an overview of the SAP NetWeaver versions for an LMDB-compatible SLD, and whether, and since when (which support package stack), an SLD satisfies the minimum requirements for LMDB:
SAP NetWeaver Release (SLD)
Supported Support Package Stack Level
SAP NetWeaver 6.40
not supported
SAP NetWeaver 7.0
not supported
EHP1 for SAP NetWeaver 7.0
not supported
EHP2 for SAP NetWeaver 7.0
SP6, patch 5
SAP NetWeaver 7.1
SP9
EHP1 for SAP NetWeaver 7.1
all SPs
SAP NetWeaver 7.2
all SPs
SAP NetWeaver 7.3
all SPs
If you cannot give your central SLD a required status, you can use another SLD which does satisfy the minimum requirements (e.g. the SAP Solution Manager SLD), and fill it with the data from your central SLD, using SLD bridge functionality.
Model and CR Content
The CIM model and SAP CR content requirements are:
 CIM model 1.6.16 or higher
 Newest SAP CR CONTENT, at least version 7.0
For more information about updating CR content, see SAP Note 669669.

SAP NW Solution Manager 4.0 Administrator/J2EE_ADMIN password locked out

Guys,
I was successfully able to install SPA Solution Manager v4.0(ECC 6.0) JAVA+ABAP Stack.
Post Installation, I am tried to logon to the SolMan (User Management & SAP Netweaver Adminsitrator) through HTTP (IE) URL http://<localhost>:port
The homepage displays just fine. When try to authenticate to User Management & SAP Netweaver Adminsitrator using following commbinatioln, the authentication fails.
user = J2EE_ADMIN password = <ADMIN>
OR
user = user = J2EE_ADMIN password = <admin> (Not sure if the password is case sensitive)
Now, I looked at the alerts and found that J2EE_ADMIN user is locked.
Does anyone of you know how to unlock this id and what its password should be ?
Any alternative user id/password can be used to login ?
Should I have to install SAP GUI for Java or ABAP ?
Please help me login to solution manager.
Thanks for your help!!
Chris.

Hello,
as far as I know you can login with a sapgui to your installed system. If you did an standard installation, then the J2EE stack is bound the client 001. Therefore logon as DDIC or SAP* to the ABAP part with SAPGui and unlook the J2EE_ADMIN user.
You had tp specify the passwort of all users during the installation process of SOLMAN 4.0. If you did an standard installation, you only specified one password for all kind of users.
HTH
Frank

Solution Manager 7.1

Hello Sap Gurus,
I have a problem with my solution manager 7.1 sps11. ( which was upgraded from 7.0 EHP1)
When I run the configuration for the solman_setup -> System Preparation -> step3 Specify Connectivity Data I get RABAX_STATE error
Link
http://hostname:8040/sap/bc/webdynpro/sap/wd_sise_main_app?sap-client=000&sap-language=EN
Error
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
Dump
/WD_SISE_CUSTOM_AGS
/1BCWDY/M19KN704GUVUSGWREG7A==CP
I am running this from cl000 with user solman_admin to which I have added sap_all and sap_new profiles, same under ddic user.
I have set parameters:
icm/host_name_full =hostname.domanin.com
SAPLOCALHOSTFULL =hostname.domanin.com
SAPLOCALHOST=hostname
icm/server_port_0=PROT=HTTP,PORT=8040,TIMEOUT=1200,PROCTIMEOUT=1200
I have read notes 1869765,1319829
517484 - Inactive services in the Internet Communication Framework
1680616 - RABAX_STATE Solman 7.1 Basic configuration step 3.1
1831404 - Short Dump OBJECTS_OBJREF_NOT_ASSIGNED occurs in Self-Monitoring
but none is working.
Please advise as I have no more ideas what I should do. What other services to activate ?
Thank you in advance,
Mihaela

Hello,
I have checked and applied all the folowing notes and still the error is present:
Central Note 1933506 - SAP Solution Manager 7.1 SP11 - Basic functions
From which
Cannot be implemented
1784854, 1575989 ca
1334867(Doc. WS: Lock Release)
1288194
Note 1690804 Dual stack: Automatic creation of the technical scenario
Implemented
1830640 - Authorizations for SAP Solution Manager RFC users as of SP09
875986(snote)
1955674 Logical components for Solution Manager 7.1 Support Package 10 – Prerequisites
1990166 Deletion of RFC destinations
1970901 Custom code library collector for objects (BW solution) calls functions and methods only
2023332 Update indicator is missing for activities after an upgrade - Support Package 11
1964058 SOLMAN_SETUP: Problems with status of the RFC destinations
1906937 - Corrections for unified rendering 702/15 V (UR-mimes)
1989075 UPL Extractor date without data (1779464)
I have run from se37 report RS_INACTIVE_OBJECTS_LIST and no inactive objects found
Also when am trying to run Tcode LMDB I get same errror:
500 SAP Internal Server Error
ERROR: An exception has occurred (termination: RABAX_STATE)
And Dump:
Category
ABAP Programming Error
Runtime Errors
UNCAUGHT_EXCEPTION
Except.
CX_LMUF_INVALID_PARAMETER
ABAP Program
CL_LMDB_SERVICE_AUTHORIZATION=CP
Application Component SV-SMG-LDB
What happened?
    The exception 'CX_LMUF_INVALID_PARAMETER' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_LMDB_SERVICE_AUTHORIZATION=CP' has to be
    terminated.
Please advise as I find no solution on all forums that I have checked so far.
Thank you,
Mihaela

Install ECC 6.0 and Solution Manager on same server Error (MaxDB/Linux)

I have installed Solution manager on one server and then ECC 6 also in the same server with another SID. during the installation it errored out at phase "SLD configuration" with UME error , J2EE_ADMIN locked etc..we checked the user id and noticed it got locked in ECC 6 system and we unlocked it.
But after the ECC installation the solution manager java engine is not coming up error with "com.sap.security.core.ume.service failed" error. Prior to the ECC installation the Solution Manager J2EE was working.
thanks in advance
Mathew

error in the /j2ee/cluster/server0/log/defaultTrace.1.trc
is as follows
#1.5#00137256A483001E0000001700006F190004163784D40864#1150327614343#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_61##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
When I looked at using jcmon the dispacher is up and the server0 and SDM is down

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Error in Phase Import ABAP by Installation of Solution Manager 4.0

Hello,
i have started Installation of Solution Manager 4.0 (Win,MaxDb).An Error occurred during phase Abap Import. From 18 Jobs only 13 was completed, 5 failed. After retry next 3 jobs was completed, but the last 2 will not completed (i have tried 3 times).
Messages from logs:
import_monitor.log
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2007-06-09 15:40:49 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0
ERROR: 2007-06-09 19:04:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process 'D:\usr\sap\SM2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
SAPAPPL0.log
(IMP) INFO: import of LISCOMDES completed (0 rows) #20070608172145
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
(DB) ERROR: DDL statement failed
(ALTER TABLE "LISDOMAIN" ALTER PRIMARY KEY ( "DOMNAM", "STATE" ) )
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(IMP) ERROR: LOCK TABLE failed for table LISDOMAIN
(RDI) ERROR: missing attribute description for table "LISDOMAIN" in DB independent control file "E:\install_dvd\export\EXP3\DATA\SAPAPPL0.STR"
Have anybody any ideas or sugestions?
Regards
Bogdan Rokosa

Hello,
problem solved. After installation stop and system restart, phase ran without errors.
Regards
Bogdan Rokosa

Solution Manager 4.0 Installation Error AIX 5.3 / Oracle 10.2.0.1

Hi All,
I am facing an error in the installation step of Solution Manager 4.0 on AIX 5.3 / Oracle 10.2.0.1
Hostname : INXXXXSAPIDES
The ABAP instance is not coming up and the Installation failed.I tried to bring up the instance manually.But was not successful.
Workprocess traces :
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fa070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fa470
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5720kb, dir_size: 5664kb.
A Attached to PXA (address 0x7000001e0000000, size 150000K)
A abap/pxa = shared unprotect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x113a1f5c0
=> Stack address = 0xfffffffffffded0
=> Stack low = 0xfffffffffffb5e0
=> Stack high = 0xffffffffffff810
=> Stack Trace:
 pthread_kill() at 0x900000000490650
 praise() at 0x900000000490070
 raise() at 0x900000000059624
 abort() at 0x900000000084a90
TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T0/M0 [thxxhead.c 10721]

DEV_DISP 
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Sat Jul 28 22:41:18 2007
ERROR => W0 (pid 442462) died [dpxxdisp.c 14319]
ERROR => W2 (pid 635048) died [dpxxdisp.c 14319]
ERROR => W3 (pid 598164) died [dpxxdisp.c 14319]
ERROR => W4 (pid 770084) died [dpxxdisp.c 14319]
ERROR => W5 (pid 815142) died [dpxxdisp.c 14319]
ERROR => W6 (pid 761862) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W7 (pid 671804) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W8 (pid 630958) died [dpxxdisp.c 14319]
ERROR => W9 (pid 622786) died [dpxxdisp.c 14319]
ERROR => W10 (pid 549070) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W11 (pid 544802) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W12 (pid 508062) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0xa1 --> 0x81
Sat Jul 28 22:41:55 2007
ERROR => W1 (pid 802934) died [dpxxdisp.c 14319]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
stderr1
Command: dw.sapSM4_DVEBMGS10
 pf=/usr/sap/SM4/SYS/profile/SM4_DVEBMGS10_INSISCSAPIDES
ICM up and operational (pid: 675892) ***
timezone value meaningless. BSD libraries linked?
work process W1 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W2 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
work process W12 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
.timezone value meaningless. BSD libraries linked?
work process W4 died => ThSigHandler: signal
work process W8 died => ThSigHandler: signal
timezone value meaningless. BSD libraries linked?
Can someone please help me in this.
Thanks
Siva
Message was edited by:
 siva sakthi

I found the solution..
There was a a problem in the timezone setting for the server.After changing it and rebooting it worked perfectely.

Solution Manager 3.2 SP 8- Change Request Management Configuration Problem

Hi friends,
We are in process of implementing SOLMAN 3.2 SP8 in our landscape.I am facing problem in configuring change request management.
When the developer is working on an urgent correction document we are facing a problem.The steps we are following are here under provided.
Step 1 :
Selected Action "In development" - > it created the transport request in the dev system.
Step 2:
Action "Log into System" -> made correction attached to the transport request manually and released the task.
Step 3:
Action "Release transport requests" -> The transport request in the development was released.
Step 4:
Went for action "Pass to correction" -> I am facing exceptions which conveys
Status was reset by system
A condition is not satisfied because of an exceptional situation
Not all transport requests yet released
And we would be thankful if you provide the authorization required for the different roles in the change request management.I have followed the help file of SOLMAN 3.2 and create the users as under
User - Role
SOCM_RQSTR - ZSAP_SOCM_REQUESTER
(Derrived from SAP_SOCM_REQUESTER)
SOCM_DVLPR - ZSAP_SOCM_DEVELOPER
(Derrived from SAP_SOCM_DEVELOPER)
SOCM_CHNGNGR - ZSAP_SOCM_CHANGE_MANAGER
(Derrived from SAP_SOCM_CHANGE_MANAGER)
SOCM_CHNGNGR - ZSAP_SOCM_IT_OPERATOR
(Derrived from SAP_SOCM_IT_OPERATOR)
Even then I am facing problems while developer creating transport requests and while logging into development system.
I tried adding S_RFC,S_RFCACL auth objects to their roles but did not help.
Pl. suggest.
Thanks & Regards
Mrutyunjay
Message was edited by: Mrutyunjay Rao Dora

Hi all,
We are trying to implement the Change Request Management piece in Solution Manager 3.2.
We are facing the following issues which I think relate to the same reason:
1)We have created a Maintenance Project in SOLAR_PROJECT_ADMIN and assigned it a logical component, which consists of our two system landscape (namely DEVàQAS). We have also created the IMG project in the DEV system and have distributed that IMG project to both the Solution manager system and the DEV system. Now we have to make the maintenance cycle and task list for that maintenance project, but as we select the project and click on create project cycle it shows the message "The project is not released. Hence cycle can not be created". It is showing the status of project as locked .How can we open or unlock the project to remove the error?
2) Also after selecting the SMI project when we click on the button CTS status switches or project specific Transport route it responds with the error "Project landscape not configured; set the project status to "open" first ".
3)When we click on synchronize single project it prompts for the login of connected system (Development System) and after login, it gives an error "Warning, problems during synchronization of the system Landscape".
For Error resolution, we have checked the system landscape and it does not give us any errors. We have done that, both from the solution manager by going to the transaction SOLAR_PROJECT_ADMIN --> >system landscape tab>selecting our logical component and doing a check by clicking the "Check system Landscape" button. It returns with "no Errors". We also did a check on the TMS configuration by logging directly on to the TMS domain controller system and checking the Transport routes. We have checked the RFC connections without any errors.
Any help would be greatly appreciated.
Thanks
Abhi

Solution Manager too Slow

Dear All,
We are running SAP Solution Manager 7.01 on Oracle 11g in AIX.
This central Solution Manager system is connected to more than 150 satellite systems.
The response of the system is too slow while we take transactions like solman_workcenter, RZ20 etc.
Is this because the system needs to fetch/collect infromation from all these 150 satellites before preseting the screen.
Solman is running with 10 CPU, 50 GB RAM and 82 GB swap.
The portal pages in the transactions takes more time to load.
Could you please help me to pin point the bottle neck in the system.
Regards,
Kiran

Hi,
Basically with 150 systems you may experience network capacity issue.
It does not matter if the system is the Solution Manager or any other SAP system. The analysis start from inspecting the overall time distribution by using the /nSTAD, then depending on the outcome check persistency, remote communication and locking with ST05 .
If in STAD there are huge wait times then definitely the network capacity should be inspected with OS-level monitoring tools, same for the CPU, memory and disk.
Regarding the java side views, it is very important to inspect the java side performance using the JDSR statistics in NetWeaver Web Administrator. There you would see the java side resource consumption to localize a potential memory consumption or CPU related issue. It is very important to clarify if the bottleneck is not the Garbage collection in java - if that is the case, the heap size parameters need to be tuned.
Best Regards,
Sylvia

Solution Manager 7.1 Integration into SAP Landscape

Hi All
I have a few questions for all the SAP Solution Manager experts out there and for anyone that would like to take a stab at these questions. An organization would like to implement a 3 system landscape for the following SAP Applications; SAP ERP, SAP CRM, SAP SRM, SAP Portal, SAP XI, SAP BI (SAP BW and SAP BOBJ) as well as SAP Solution Manager. They want to use all the functionality that is available in Solution Manager. The questions that I pose is as follows;
     1. How many Solution Manager systems must one implement? A 3 system landscape or will a 2 system landscape suffice? Bearing in mind that    functionality such as CHARM will be implemented.
     2. Where will the productive SLD reside? How would this SLD connect to the Solution Manager Systems?
     3. To which Solution Manager System will all the diagnostic agents connect to?
Your expert input would gladly be appreciated and points awarded accordingly.
Regards
Deen

Hi Deena,
I good approach would be to use a two system landscape.
Where - all sandbox and development systems are connected to develpoment solman.
and - all other systems, like quality, pre-prod, and prod are connected to production solman.
For CHARM, this is sufficient. Keep the hardware specs on the higher side of production solman.
You should use a separate SLD instance on your solution manager. WHY, incase you need to update the SP level, as SLD needs to be on the highest level, outage from SOLMAN or PI would be avoided.
You can also use, SLD of Solution manager, SYNC you dev sld with prod sld - uni directional sync - eg for stack generation.
SLD connect to your solution manager during solman_setup basic configuration and preparation of your landscape through LMDB.
Check.
SLD and LMDB Topology: Replacing the Source SLD for the LMDB
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/a5/971735dd184f5c8d943c6cf423d13a/content.htm
Connect diagnostic agents to your producitve solution manager.
For more please reply back.
Good Luck !!
Regards,
Divyanshu

Problem while adding SAP Netweaver 7.3 As Java in Solution Manager 7.1

Hi All,
We are facing strange problem while configuring managed system- SAP Netweaver 7.3 As Java in Solution manager 7.1 SP3. We added this system in SLD of solution manager and synchronized it with LMDB. As a result this As Java system is present under Technical systems in SMSY. Now we are assigning Product system to it with Landscape verification tool. But the problem is when we try to save after assigning Product version as SAP Netweaver and Product as SAP Netweaver 7.3. It always gives below error:
Fatal error trying to update Technical System (UPDATE_TSYSTEMS). Update could not be executed.
Product instance 54 not found
Product instance number error keep on changing depend upon what usage i select like ADS 7.3, Application Server Java 7.3 etc.
Please suggest if someone has faced this issue.
Thanks
Sunny

Hi Sunny,
You can refer to my first blog on this topic:
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Try to select only one product instance in LMDB and saved. After that, you can add more product instance in SMSY.
Hope it helps.
Cheers,
Nicholas Chang

How to Unlock the Object in SAP Solution Manager

Hi all,
Iam trying to Upload the TS into Solution manager, but the Project Documentation TAB is locked by another User.So i am unable to get ADD button enable
I dont have access to SM12 or SE03. How to Unlock this
Regards

This is not the right forum to ask your doubt. Post this in Solution Manager forum
SAP Solution Manager
Regards,
Prateek

LMDB lock at Solution Manager 7.1 SP03

Similar Messages

Maybe you are looking for