LMS 4.2.3: Failed to fetch vlan.dat

Hello
We are running LMS 4.2.3 on a softappliance. Config fetch works fine. Protocol order is ssh and scp. VLAN fetch we configured the protocol order to SCP and TFTP. When trying sync archive i see the follwing error message:
Status: Partially Successful
VLAN
Insufficient no.
SCP failed: Insufficient no. of interactive responses (or timeout) for command copy flash vlan.dat scp:.
SCP from CLI works fine with the command:
copy flash:vlan.dat scp:
Does anybody have the same problem?
Any ideas?
Regards,
Martin

Make sure you have configured the SCP credentils in LMS under :
Admin > System > System Preferences.
For more details check :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/admin/server.html#wp1168063
-Thanks

Similar Messages

Failed to fetch pluggable data source error

I'm getting this error when creating a report that is connecting to a DB2 table using jdbc. Report builder seems to connect to the database fine, however when I attempt to compile/run the report I get the following error -
'REP-4102: Failed to fetch pluggable data source.
java.lang.AbstractMethodError: COM/ibm/db2/jdbc/app/DB2ResultSet.getStatement'
I'm using the following in my jdbcpds.conf on my local machine.
<driver name = "ibm-db2"
subProtocol = "db2"
connectString = "subProtocol:databaseName"
class = "COM.ibm.db2.jdbc.app.DB2Driver"
connection = "oracle.reports.plugin.datasource.jdbcpds.JDBCConnectionHandling"
loginTimeout = "0">
</driver>
Has anyone experienced this issue or has some insight as to what I need to do to resolve this?
TIA
Brian

Dear Oracle Reports Team,
Can you please help me out ???
Need your help in this regard urgently.
Best Regards,
Ramakrishnan L
Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

REP-4102: Fail to fetch pluggable data source

Hi,
I am using Oracle 10g Reports version 10.1.2.0.2
and the back end is DB2.
I have no problem in establishing the connection Reports with DB2.
The thing is while executing the report, Iam getting this error. REP-4102: Fail to fetch pluggable data source
Java.lang.AbstractMethodError: Com.ibm.db2.jdbc.app.DB2Resultset.getStatement()Ljava/sql/Statement.
Please help me.
Thanx in advance.

Dear Sachin,
Thanks for the quick response.
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'

Failed to fetch pluggable data source.

Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
Can you please give me as how to solve this problem ?
Regds,
Ramakrishnan L

Dear Sachin,
Thanks for the quick response.
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'

Issues with CWLMS 3.2 RME 4.3.1 cannot fetch vlan.dat off a VSS and 4510.

Hi,
I am having a major headache with RME collecting the vlan.dat from a VSS and 4510, the device and credentials work fine, however when archiving the config i get partial success due to vlan failing. You can see in the IC_Services log that it attempts to TFTP the .dat file off which it fails with, i believe vlan fetch is only supported by SSH or telnet
when you do a CDA test both devices pass on everything..

managed to log on and please see below, tftp on one device works fine but from the 4510 or vss still fails
GRA_CHUB_CR_01#copy cat4000_flash: tftp:
Source filename []? vlan.dat
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
%Error opening tftp://172.20.220.10/vlan.dat (Timed out)
GRA_CHUB_CR_01#
DAR_R002_AS_01#
DAR_R002_AS_01#copy flash:vlan.dat tftp:
Address or name of remote host []? 172.20.220.10
Destination filename [vlan.dat]?
616 bytes copied in 0.009 secs (68444 bytes/sec)
DAR_R002_AS_01#

Failing to fetch the data from application

Hi Experts,
I have a concern over here related to one query.
My application user is executing one query aganist the database view and facing the below execption.
But when i am executig the same from db end it is getting executed.
com.lombardisoftware.component.exception.worker.ExceptionComponentWorker.doJob(ExceptionComponentWorker.java:39)
          at com.lombardisoftware.component.common.workflow.ExecutionJob.doJob(ExecutionJob.java:449)
          at com.lombardisoftware.server.ejb.workflow.EJBWorkflowManagerBean.doResumeWorkflowEngine(EJBWorkflowManagerBean.java:875)
          at com.lombardisoftware.server.ejb.workflow.EJBWorkflowManagerBean.resumeProcess(EJBWorkflowManagerBean.java:315)
          at sun.reflect.GeneratedMethodAccessor266.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:592)
          at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
          at org.jboss.ejb.StatefulSessionContainer$ContainerInterceptor.invoke(StatefulSessionContainer.java:598)
          at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
          at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
          at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
          at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
          at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:173)
          at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)
          at org.jboss.ejb.plugins.StatefulSessionInstanceInterceptor.invoke(StatefulSessionInstanceInterceptor.java:330)
          at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
          at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:136)
          at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
          at org.jboss.ejb.Container.invoke(Container.java:954)
          at sun.reflect.GeneratedMethodAccessor186.invoke(Unknown Source)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:592)
          at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
          at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
          at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
          at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
          at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
          at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
          at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
          at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
          at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
          at org.jboss.proxy.ejb.RetryInterceptor.invoke(RetryInterceptor.java:176)
          at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
          at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
          at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:121)
Please advice.

My application user is executing one query aganist the database view and facing the below execption.
But when i am executig the same from db end it is getting executed.So the problem is with the application & not Oracle RDBMS.
Go talk to the Application Support folks

Failed to fetch express pluggable data source

Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

Dear Oracle Reports Team,
Can you please help me out ???
Need your help in this regard urgently.
Best Regards,
Ramakrishnan L
Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L

Getting past "Fetch VLAN configuration - Command failed" errors in Cisco Prime Infrastructure 2.0 - How?

I've got a handful of devices in Cisco Prime Infrastructure 2.0 which show up in the "Archive Failed Devices" view. The "Failure Reason" is some variation of "Fetch VLAN configuration - Command failed" sometimes including "TELNET: Failed to establish TELNET connection to x.x.x.x". What does this mean? How do I overcome this? In all cases, the device is configured to use SSH and has valid SSH credentials. In all cases, I can SSH from the command line of the NCS appliance to the devices listed in the "Archive Failed Devices" view.

Hi
I was able to fix the "Fetch VLAN configuration - Command failed" by allowing tftp from the device to PI server in firewall. See if this can help.

Prime Infrastructure 2.1 - Fetch VLAN Configuration - command failed

Hi,
i am installing the system on a customer's site.
i've noticed that most of the devices configured on the PI have resulted in error in the Configuration Archive with this error:
Fetch VLAN Configuration - command failed.
i checked that the tftp service on the PI is enabled.
i tried manually executing from a device: copy flash:vlan.dat tftp://PI_IP and couldnt manage to do so.
i also tried manually to do it to another tftp server and it worked.
i dont see any FW drops.
does anyone have any idea how to troubleshoot this?
thanks in advance!

As to get the VLAN information, the file in Cisco devices Flash : Vlan.dat is fetced, and if PI fails to do so, it gives this error. As it is a file in flash, PI needs to send it over to Server itself using TFTP.
If TFPT is somehow not working between Server and devices, it may throw this error.
Is it happening with all the devices or some perticular platform?
If with all the device, you need to check if there is any Firewall blocking TFTP access to devices.
Also, you can check if TFTP service on CPI is working properly by command ncs status.
If service is affected, try to restart service - service tftp restart Or you can restart the PI Machine itself.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Vlan.dat Failed retrival

Hello,
I have seen the various posting regarding how LMS copies vlan.dat : ie over tftp.
I have verified login credentials over SNMP and SSH and these come back Ok however I still get :
VLAN
CM0151 VLAN RUNNING Config fetch failed for <switch> Cause: Command failed
VLAN Config fetch is not supported using TFTP.
TELNET: Failed to establish TELNET connection to 10..x.x.x - Cause: Connection refused.
Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
So can someone please answer why it it saying it is trying over telnet when it is configured to do it over ssh?

Telnet was tried because the retrieval over SSH failed. The way vlan.dat is archived is RME will login to the device via SSH or telnet, then issue a "copy flash:vlan.dat tftp:" command. This means that TFTP must be allowed from the device to the RME server. Make sure this copy command can be executed manually.

LMS 4.0 Config collection vlan.dat

Hi Guys,
I have a network with 4500, 3560 and 2960 switches.
In my LMS I have created 1 credential set to access all the switches. The config collection (startup, running and vlan) has succeeded for all the 2960 switches. The collection of the running and startup config has also succeeded for the 4500 and 3560 switches. But LMS doesn't collect the vlan.dat from the 4500 and 3560 switches. (inventory collection is ok with all the switches).
I have only configured SSH as config fetch protocol.
Why doesn't my LMS collect the vlan.dat of the 3560 and 4500 switches. The difference between the 2960 and the other switches is that there are only 2 vlans created on the 2960 switches and +30 vlans on the 3560 and 4500 switches.
Is the vlan.dat file maybe to big on the 3560 and 4500 to be collected with ssh...
Any ideas?
Thanks,
Best Regards,
Joris

I believe that LMS 4.2 can get the vlan.dat via SCP. Prior versions require TFTP to do this.
The commands to start the TFTP can be send via TELNET, SSH and possibly SNMP.
Cheers,
Michel

Can vlan.dat file be collected using SCP on LMS 4.2 ?

Hello, I need help regarding vlan.dat file fetch.
I'm using Cisco Prime 4.2 and VLAN fetch for all devices is currently going over TFTP. Devices managed by LMS are 2960, 4500, 6500 series. All devices are using SSH v2. ACS server is configured on all devices and SSH credentials are OK.
This is the error meessage I get when i select SCP: "SCP user credentials not available. Configure the SCP user credentials and try again Action: Check if protocol is supported by device and required device package is installed."
Is it possible to use SCP as VLAN fetch protocol? How to configure this on a devices and how to enter SCP credentials in LMS?
Thanks.

I don't think anything other than tftp is supported as the transport protocol for actual transfer of the vlan.dat file from the switches by LMS.
See this post where Joe C. describes how LMS logs into the target device (via telnet or ssh) and then transfers the files back to itself using tftp. That's about 2-1/2 years old but matches what's described in the current LMS Configuration Management user guide, quoted here:
"VLAN — Count of the successful VLAN configuration fetches for each protocol. This configuration fetch is supported by only Telnet and SSH protocols."
You also have the option (as of LMS 4.2) of turning off vlan.dat collection since it is often of limited utility. Please refer to this thread for details.

Failed to fetch data provider data. (LO 26306)

Hi,
We have created a webi report, which is having a date prompts.
The same webi report, we have used in xelsius using a live office connection.
In Xelsius, We have checked the box 'refresh on load', under usage tab.
When we run the xelsius dashboard, we are getting an "Failed to fetch data provider data. (LO 26306)".
Can anyone please help. why this error is getting. Is it because of prompts which are there in webi report.
Basically, our requirement is when the user runs the dashboard, prompts should be displayed. User will enter the prompts and based on that, dash board should get display.
Regards
Ramesh Ganji

See SAP Note 1440129.
Symptom
Change the Live Office documentation to clearly state that before importing a Live Office document within Xcelsius the Live Office document has to be opened in Excel and the 'Refresh All objects' triggered. If this step is not done and the Excel file is saved without prior refresh the error 'Failed to fetch data provider data (LO 26306) in Xcelsius is raised (when previewing the model)
Environment
Live Office 3.1
Xcelsius 2008
Cause
The information is not stated in the official documentation.
Resolution
The issue has been identified and logged under Problem Report ID ADAPT01374107
Keywords
01374107, ADAPT, ADAPT01374107, LO, 26306, LO 26306, LiveOffice

Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT

I am unable to provision DSfW after installing it. The Provisioning PreCheck is successful, but the Configure DNS portion fails.
It looks to me as though the installation did not create a DNS Locator object in eDirectory. It seems as though we had some old ones floating around from years past.
We currently do not use Novell DNS for DNS. The zone is hosted on an Active Directory domain controller. After clearing out all of the old DNS objects from eDirectory, I would like to retry provisioning DSfW. However, I cannot seem to reinstall, uninstall, or provision.
Is there a way to manually create the DNS Locator object that DSfW is looking for, or is there a way to remove and reinstall DSfW.
The documentation does not say that I need to be running Novell DNS in eDirectory. Do I have to have an existing Novell DNS installation?
Thank you for any information that you have about this. Here is an excerpt from the log:
2013-07-05 15:38:00,052 INFO - Authentication :Successfully completed the provisioning plugin authentication
2013-07-05 15:38:22,816 INFO - DNS Configuration:DNS Configuration starting
2013-07-05 15:38:22,817 INFO - DNS Configuration:Script to be run is /opt/novell/xad/share/dcinit/provision/provision_dns.pl
2013-07-05 15:38:28 Pre-check of DNS configuration Passed
>>>Creating DNS Zone object
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/frd_install.pm line 797.
at /opt/novell/xad/lib64/perl/Logger.pm line 120
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 211
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Install/frd_install.pm line 827
frd_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/Install/frd_install.pm line 329
frd_install::configure_zone_object('frd_install=HA SH(0x793080)') called at /opt/novell/xad/share/dcinit/provision/provision_dns.pl line 45
2013-07-05 15:38:28,451 INFO - DNS Configuration:DNS Configuration returned.
Dennis

Hi Dennis,
We brought in logic to utilize the existing Locator Object based on the customer feedback and DNS restriction.
The DNS Yast page indicates you on which locator context that is being picked, by default it is "ou=OESSystemObjects,<Domain NC>" if there is no pre-existing locator objects. Now if you need locator object in new context, I'm worried, you will have to redo the installation to get a cleaner installation as it is two stage process and many back-end files for DNS configuration are generated at Yast stage.
Originally Posted by deisler
The zone is hosted on an Active Directory domain controller. After clearing out all of the old DNS objects from eDirectory, I would like to retry provisioning DSfW. However, I cannot seem to reinstall, uninstall, or provision.
Dennis
DSFW doesn't support this. It can co-exist with AD only by means of trust and it doesn't support any other means of co-existance like being Child domain to AD domain or Additional Domain controller to AD domain. The zone being hosted on an Active Directory domain controller for DSFW domain is not supported.
Originally Posted by deisler
Is there a way to manually create the DNS Locator object that DSfW is looking for, or is there a way to remove and reinstall DSfW.
Yes you can do it by using dns-maint and make sure you create the locator object in the same old locator context. You can get the old context that DSFW is looking for from following file.
frd:~ # cat /etc/opt/novell/xad/xad.ini | grep DNS_LOCA
DNS_LOCATOR_OBJECT = cn=DNS-DHCP,ou=OESSystemObjects,ou=frd,o=novell
frd:~ #
Make sure you have following objects, and if you notice, the DNSSERVER object is must and it will always exist in ou=OESSystemObjects,<DOMAIN NC>. Hope you have not deleted the DNSSERVER object by mistake.
DNS_LOCATOR_OBJECT = cn=DNS-DHCP,ou=OESSystemObjects,ou=frd,o=novell
DNSDHCP_GROUP = cn=DNSDHCP-GROUP,ou=OESSystemObjects,ou=frd,o=novell
DNSSERVER = cn=DNS_frd,ou=OESSystemObjects,ou=frd,o=novell
Or you can reach out NTS and get access to our domain removal tool and re-attempt from fresh.
Originally Posted by deisler
The documentation does not say that I need to be running Novell DNS in eDirectory.
Please review our Administration Guide, your first domain controller must to be running Novell DNS in eDirectory by default. There is no choice.
Originally Posted by deisler
Do I have to have an existing Novell DNS installation?
There is no need to have an pre-existing Novell DNS for configuring DSFW, DSFW will bring in a DNS server by default.
Hope this helps you resolve your issues. If not, request you to reach to NTS or re-attempt a fresh install. Suggest, not to mix your domain installation with Active Domain Controller and get into issues.
-Kamalesh

LMS 3.2 on Solaris 10 - Cannot tftp vlan.dat to server

Hi All,
I've read several posts and could not find one that would resolve my issue.
I get the partially successful on several switches. I understand that is because of LMS not being able to tftp vlan.dat back to server.
I tried it directly on a switch and the transfer only works if the filename is already created in the tftp directory. Is there a way to change that?
Thanks
Jose Ribeiro

Hi Joseph,
The ciscoworks server has full access to the switch as per below. Neither access nor credentials seem to be the issue here.
I've read a few posts where it was stated the need to create a 'dummy' vlan.dat file so that the device would not show as partially successful on the RME job. Is this the case here? If so this is a very strange solution.
Thanks,
Jose
-bash-3.00$ ssh [email protected]
[email protected]'s password:
CC
WARNING: This system is for authorized use only. Any or all access to or
uses of this system may be monitored and recorded and subject to audit.
Use of this system is expressed consent to such monitoring and recording.
Unauthorized or improper use of this system is prohibited and is subject
to criminal and civil penalties.
ctspotdcemsw302>ena
Password:
ctspotdcemsw302#
ctspotdcemsw302#sh ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 20-Dec-05 19:11 by kellmill
Image text-base: 0x40101040, data-base: 0x42D60000
ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF1, RELEASE SOFTWARE (fc1)
ctspotdcemsw302 uptime is 3 years, 28 weeks, 3 hours, 16 minutes
Time since ctspotdcemsw302 switched to active is 3 years, 28 weeks, 3 hours, 35 minutes
System returned to ROM by power cycle at 17:32:48 UTC Wed Jan 11 2006 (SP by power on)
System restarted at 05:35:07 EST Sun Feb 25 2007
System image file is "disk0:/s72033-entservicesk9_wan-mz.122-18.SXF1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.1) with 458720K/65536K bytes of memory.
Processor board ID SMG0832N2ZV
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
15 Virtual Ethernet/IEEE 802.3 interfaces
266 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
ctspotdcemsw302#exit
Connection to 10.86.109.3 closed by remote host.
Connection to 10.86.109.3 closed.
-bash-3.00$

LMS 4.2.3: Failed to fetch vlan.dat

Similar Messages

Maybe you are looking for