Loading Master Data into ODS

Hi,
     Can anyone tell me how to load the master data into the ODS?
Thanks
Yadav
Edited by: yadav on Apr 12, 2008 8:04 PM

Dear Yadav,,
U can load the master data to ur ODS..
The Process is same as loading Transaction Data into ODS but..
1. U need to do  flexible Update instead of Direct Update...
2. Maintain all the Attributes in ur DATA part...
3. The record on which Updation depends should reside in the KEY FIELD section.
But there is difference in loading master data to info object and ODS..
If loaded in Info Objects..REusability is there.
But in ODS no reusability...
Hope this helps u...
Assign points if helpful...
Best Regards,
VVenkat..

Similar Messages

  • First Loading of Master data into ODS

    Hello BW gurus,
    I have read the below mentioned sentence in a material stating that
    'By using flexible updating, it is possible to write master data from different sources into a consolidated object (master data ODS object) before this is stored in individual master data tables.'
    1)  why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
    2) Is every master data from source systems first loaded into ODS  before it is stored in individual Master Data tables?

    hi,
    1) why master data from different sources is being written into ODS first , before it is stored in individual Master Data tables ?
    Ans - In real time scenarios y may have to load data from various source system (liks sap,non sap,flat file).also more than on r3 source system is also possible. hence to have consolidation of the master data based on source system we load master data to ods first. but is not always. one few master datas like - Batch number,delivery number,invoice number. u can also load directly to master data tables using direct update.
    2) Is every master data from source systems first loaded into ODS before it is stored in individual Master Data tables?
    not mandatory, it depends on requirement.
    Ramesh

  • Caller-70 Error while loading master data into infoobject

    hi ,
    I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
    Short dump in the Warehouse
    Diagnosis
    The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
    System Response
    "Caller 70" is missing.
    ST22 dump analysis is as below:
    Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in                  
    "VALUE_TO_SID_CONVERT_DB".                                                                  
    The main program was "RSMO1_RSM2 ".
    Please help as soon as you can..Production problem....
    Regards
    Rakesh

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • To load master data into infoobject 0mat_unit

    Hi Experts,
    Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
    We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
    I will assign full points for suitable solution.
    Thanks in advance!
    Sapna

    Hi Sapna,
    See
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
    Udo

  • Loading Master Data into a DSO

    Hi Experts,
    I am unable to analyse whether loading data from Master Data InfoObject into a DSO will cause performance issues or will that work fine.
    I was trying to do the same.  Awaiting for your inputs on that.
    Thanks,
    Vijay

    Latha,
    Loading master data into a DSO can be done using the following steps:
    1) Right click on the DSO and select Create transformation... option.
    2) In the dialog box that appears, select Object Type as InfoObject and in the text box right below you give the name of the object.
    3) In Subtype of Object selection, select attribute or text as per your needs.
    4) select ok and you should see the transformation, map and activate the transformation.
    5) create DTP and run it.
    Hope this helps, [ you got my name wrong im vijay]

  • Can I reuse objects without Master data and load master data into it?

    Hai,
               I have a standard object that doesnot have Master data. Its already used somewhere else. It matches the name I want but I need to load some master data into it. Does resuing it in my catalogue and loading Master data into it hurt anything? Or should I create a new one?
    Thank you.

    Hi Visu,
    The same InfoObject can be included in more than one InfoObject catalog without any issue. Also loading master data would not hurt an existing InfoProviders where it is being used.
    Hope this helps...

  • While loading master data into PSA, the eorror is 'Error from PSA"

    Hi All,
    While loading master data into PSA, the eorror is 'Error from PSA"
    Could you anybody please help in this reagard.
    Thanx,
    Sridhar.

    Hi rakesh,
    May be IDOCs not processed completely,
    Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
    Cheers
    Raj

  • Loading Master data into BPS through layouts

    Hi SAP Gurus,
    Is it possible to load the master data into BI-BPS through layouts(in BI 7.0
    Thanks in advance.
    Regards
    Pradeep

    Hi Pradeep,
    if its combination of charactertics & keyfigures, then you need to load master data in Info objects(Characterstics) and for key figures you can load directly in the layout, once you save it , these values get saved back in Cube.
    Hope this helps
    Regards
    Imran

  • I couldnu0092t load master data into a DSO

    Hi,
    I need some help!!
    I’am trying to load master data to a DSO, but I don’t find the way to do it.
    Particularly, I want to fill a field of my DSO with an attribute of an InfoObject (that is also a key field of the DSO).
    I create a transformation rule that connect my DSO with my transactional extractor; this rule fills all the fields, with the exception of which it is had to be complete with the attribute of this infoObject. The infoObject has his own transformation rules, which connect this master data characteristic with a M. T. extractor.
    This DSO will be used only as a data warehouse that provides data to another system.
    How I could load this attribute to my DSO? Anyone’s knows the steps to do it?
    Thanks in advances for any kind of help.
    Best regards
    Juan Manuel

    Hi Voodi,
    Yes, I have de BI 7. 0 version.
    I will comment my situation. My DSO has three key fields (society, number of doc. and schedule line), one of these is my master infoObject (the number of document). This InfoObject has an attribute (the people who enter de document), which I couldn’t load it using my transactional extractor because it doesn't’t have the R/3 field in the extractor. That’s why; I decided to load it using master data.
    First I charge my DSO with the master InfoObject and his attribute, using a transformation rule that connect my infoprovider with de master IO data table.
    Then I charge the rest of the DSO fields, including again the master infoObjeto data field. In this case, I used a transformation rule that connect my infoProviders with a transactional extractor.
    After this, when I want to execute the activation of both request, I couldn’t do it because the system don’t let me.
    The way I do all what I says, is correct? When I am modeling the data transfer process, I have to consider something in particular?
    When I want to load the master data to the DSO, I consider only one of the key fields of the DSO (number of doc); there is any problem if I don’t consider the others two key fields.
    Thanks in advances,
    Juan Manuel

  • Master data into ODS

    HI,
    How do we load from master data infosource into an ODS , using datamart concept. can any one give me step by step details..
    When i try to assign infosource to the ODS in the update rules...it says " INFO OBJECT 0recordmode missing from the infosource"
    Thanks in advance
    Message was edited by:

    Hi Harshi,
    Add 0recordmode in master data infosource and ROCANCEL in tranfer structure
    also check this info,
    Message RSAU128 'InfoObject 0recordmode missing is an information message, you can activate the update rules even without 0RECORDMODE. The field is required for the delta method of InfoSources with connected DataSources from an SAP R/3 system. For FlatFile DataSources or external DataSources InfoObject 0RECORDMODE does not need to be contained in the transfer structure of the InfoSource, or it does not need to be filled separately in the transfer rules. In the transfer rules when maintaining the transfer structure, the delta method for flat files or external DataSources is determined by field Update mode. In InfoSources that get their data exclusively from flat files or external does not need to be contained in the you can ignore the above-mentioned message when creation update rules."
    Hope this helps,
    Sudhakar.

  • Error loading the data into ODS - Message no. BRAIN060?

    Hi,
    I am getting following error while load the data from flat file, data loaded successfully from flat file to PSA but I got following error while updating the data from PSA to data target:
    Value '010384 javablue' (hex. '30003100300033003800340020006A0061007600610062006C') of characteristic 0PO_NUMBER contains invalid characters
    Message no. BRAIN060
    Diagnosis
    The following standard characters are valid in characteristic values as default:
    !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
    Characteristic values are not allowed if they only consist of the character "#" or begin with "!". If the characteristic is compounded, this also applies to each partial key.
    You are trying to load the invalid characteristic value 1. (hexidecimal representation 30003100300033003800340020006A0061007600610062006C).
    I am trying to load Value '010384 javablue' to "0PO_NUMBER" info object for ODS with in one row with some other data.
    Any idea or any input to resolve this issue?
    Thanks in advance for any input.
    Steve

    Thanks Soumya, I have maintained the upper case letters, but I am loading upper and lower case mixed to PO number? and it is not working. What is the solution to this? If I set lower case property to the PO number infoobject, it won't accept upper case. If I uncheck the lower case then it won't accept lower case letters. I cannot add upper and lower case letters in RSKC, because it accepts up to 72 characters, I have already have more than 60 characters (special char, numbers and 26 upper case letters).
    I have already tried transfer routine but you can either convert to lower or upper but it doesn't work. we need both uper and lower case for po number, and R/3 is accepting it. why BW doesn't accept both?
    Any idea what can be done?
    Thanks in advance for your help.
    Steve

  • Regarding loading the data into ODS

    Hi all,
    I am having a sitaution where I had filled an ODS with data. Now few fields have to be added to the ODS for reporting purpose. I have added the fields. But I am having doubt in how to fill those fields alone in that ODS so that the data can be represented in the Reports on that ODS. Is there any prerequits and precautions that have to be taken????
    Regards
    YJ

    Hi,
    Just write a prog and execute it to fill the added field.
    ex: if sy-subrc <> 0.
      message s000 with 'No records selected for the specified criteria.'.
    else.
      loop at int_tab.
        update /bic/aODS00 set
                  added_field= int_tab-added_field
              where condition.
        if sy-subrc = 0.
          counter = counter + 1.
        endif.
      endloop.

  • DTP running long time to load master data due to lock on SID table

    Hi,
    we are facing a problem while DTP loading master data into targets(Info Objects).
    It is taking long time to load data due to below error.
    18.03.2014 01:03:23 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009                                                                  RSAR          051          S
    18.03.2014 01:13:40 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010                                                                  RSAR          051          S
    18.03.2014 01:24:51 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011                                                                  RSAR          051          S
    18.03.2014 01:38:41 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012                                                                  RSAR          051          S
    18.03.2014 01:52:10 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013                                                                  RSAR          051          S
    18.03.2014 02:06:53 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014                                                                  RSAR          051          S
    18.03.2014 02:22:33 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015                                                                  RSAR          051          S
    18.03.2014 02:38:37 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016                                                                  RSAR          051          S
    18.03.2014 02:55:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066"                                                                  DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56  LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 03:13:56 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017                                                                  RSAR          051          S
    18.03.2014 03:13:59 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018                                                                  RSAR          051          S
    18.03.2014 03:34:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019                                                                  RSAR          051          S
    18.03.2014 03:56:03 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020                                                                  RSAR          051          S
    18.03.2014 04:19:56 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068"                                                                  DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:09  LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 04:44:09 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00                                                             DBMAN         099          I
    18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021                                                                  RSAR          051          S
    18.03.2014 04:44:13 All records forwarded                                                                             RSM2          730          S
    For this long running data load we didnt find any short dumps and no locks available on SM12 also.
    Please help on this.
    Thanks,
    Sankar.

    Can we know what kind of data source is this. attribute or text data source.
    what is data volume? its less or more?
    Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
    While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
    Is this happens on particular day or weekend or anydays?
    Thanks

  • Loading master data compounded infoobject

    Hello experts
    I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
    In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
    InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
    This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
    Thanks for your help and happy new year
    Thibault

    Dear Thibault
    Yes, PA_PAPRCT is not the basic characteristic.
    Instead of this, use the superior object for this object.
    Than you can load the master data for all these objects.
    Hope now you will get the idea
    Regards
    Saravanan.ar

  • Process chain for loading master data attributes

    Dear Experts,
    Can any one explain the steps needed to load master data into info object through process chain.
    Thanks in advance
    Santhosh
    Please search the forum
    Edited by: Pravender on Jun 8, 2010 3:06 PM

    in bi7 this would be:
    start
    infopackage
    dtp
    attribute change run
    M.

Maybe you are looking for

  • How do I change the security setting to allow installation of software?

    I cannot install softwre from a Photoshop add-on vendor because my security settings allow only Apple and "recognized" software vendors products to be installed. How do I change this?

  • Upgrade  from 10.6.7 to 10.6.8 failed on MacBook Pro

    Sometime in the last 24 hours my wife's MacBook Pro (which she bought in December 2010) went through the automatic upgrades for (1) the Mac OS X Update to 10.6.8 and (2) Java for Mac OS X 10.6 update 5. When she tried to boot up her machine this morn

  • Getting an error when inserting a big table inside a ""-

    hi iam getting an error String not properly closed when i add big table inside a "".plz give me an idea how to insert a table inside a String.iam using jsp . thanks in advance

  • Remove profile from"Q" speed dial

    Hi all please excuse my lack of understating of forum etiquette but I am still trying to remove the profile change from the "Q"  key. Following the normal process of attaching a contact to any other key (excluding "A" ,"Q" & "W" ) Doesn't seem to wor

  • Inbound delivery config steps

    Hi  SD Guru's, Can some one send me all the config steps to configure inbound delivery creation. Currently in 4.6C and not using inbound deliveries for GR just MIGO and would like to use inbound delivery creation for PO and Scheduling aggrements(SA).