Locators in Receiving Bay

Hello All,
This may be a very naive question, but I thought I would get some help on this:
How do we handle location in large receiving bays / areas; meaning, before the goods come in to the warehouse, they are unloaded in a Receiving area, which is huge. How do we map the Receiving area location in Oracle Apps - Release 12i version.
We just download the trucks (to avoid penalties of keeping the truck occupied) create a Receipt number when the goods are downloaded in the Receiving bay, before the goods are inspected and counted. The goods come in number of trucks.
I saw some flag on the Sub-inventory type "Receiving". Is there anyway to use it for the purpose or any other solution for the business purpose.
Kindly advice, if anybody has experienced similar situations.
Thanks in advance!

I believe Oracle does offer some tracking right now through the use of operation steps on the wip job routing. You can create as many operations as you need to represent physical locations and have your employees move the job from operation to operation as needed.
-Tracy

Similar Messages

Batch Tracebility

Dear All,
I have a secenario, where I used to send a Metallic Roll sheet ( Say mother coil) to vendor and recieved 08 component ( Baby Coil). after slitting. Now my question is that my client wants a reletaionship between the mother coil and baby coil for tracebility prupsed. Frtuther to note that I am going to used the raw material for fruther production process.Could You please guide me how to mapped through the Batch management. How to draw a leaetion between the mothercoil and the babay coil.
rehgards
Bhupendra Singh

Hi,
It look like subcontracting process and you have to create BOM for same in your system by CS01 for component
then you can issue material to vendor through 541 movement type and receive bay coil
search in forum for vendor subcontracting process aw well as for batch management you will get very good thread on same,so you can explore yourself
Regards
Kailas Ugale

Hard drive not recognized in HDD bay.

Randomly, my laptop gave me the spinny pinwheel of death when I opened it, and upon restart, I got the good old folder with a "?" indicating there was no OS. Naturally, I booted up in network recovery, and low and behold, my SSD was not in the Disk utility list. I made an adjustment some time ago where I removed my optical drive, and installed the old HDD that came with the computer in it's place. I switched the drives, so that the SSD was where the optical drive should be, and the HDD in the drive bay. Upon startup, the computer booted up as usual from the SSD, and the HDD was not recognized. So from there I conlcuded that both the SSD and HDD are working correctly without failure. After putting the drives back where they originally were (HHD in optical bay, and SSD in Drive bay), and I booted up holding the option key, The SSD and recovery drive were there, but I received a prohibited sign (circle with slash) after a minute. Now it is not recognizing the drive again. I'm not sure whats going on, anyone hav any input?
Thanks

You have a faulty hard drive to logic board cable. Replace that and you should be fine and the drive put in the main bay should show up.

Setting Up New FCP5 HD Bay -- Need Help

I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.

You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high.

Can't send or receive email from one account

Just bought the iPod Touch last week. Set up Hotmail account with no problems. However my MacDialup.com account (used to be dial up, but is DSL now) won't work at all. They aren't set up to use SSL, so I turned that off after the iPod automatically tried it. I tried IMAP and POP, tried changing incoming server port number from defalt 143 to 110, triple checked spelling on every single entry including password. Tried calling my ISP tech support and talked to a tech who owns an iPhone and lives in the bay area, but he couldn't figure it out. I tried deleting the MacDialup account then syncing the Touch to my iTunes on my MacBook Pro (which has no problem sending or receiving email from this same account) and had the email settings imported from the MacBook Pro - still no luck. Tomorrow I'll try bringing both my MacBook Pro and iPod Touch into the Genious Bar. Maybe they can figure it out.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

i have a mac os x ver. 10.5.8 2x2.8 quad. my start up disk is almost full. can i change my start up disk from the original hard drive to an additional hard drive i added in Bay 4?

Always want to keep the boot drive with more free space than may seem necessary for performance and to function at its best, 30-40% free or even 50% is not excessive.
Ideal is to separate your system from your data.
You should always have bootable backup / clone of your system
Don't use a green drive for system or data though.
When you are done cloning system and/or data, remove the old original and keep as backup.
Then move the system drive to #1 - no matter what you want to reset the default boot volume to where the system is.
Using Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.1
http://www.bombich.com/software/updates/ccc-3.5.html
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
By staying with 10.5.8 you are not going to receive security updates, might want to consider 10.6.8.

Will not operate correctly Southwest Airline reservation site and will not operate on E-Bay page for listing sale items

When I go to southwest airlines to make a reservation I'm unable to get the Airport Codes or or date drop downs to work. If I enter the data then when I hit search I get a error message advising that there is no data in the cells, yet I'm looking at the data. On E-Bay when I tried to sell a vehicle I entered data into the field but when I transmit it to E-bay the data is not received. I get an error message advising to correct the "Hi-lighted" fields but no fields are hi-lighted and the data is correct.
I then switched over to Internet Explored and was able to use both sites properly.
The problem with southwest air started 10 days ago when they up-graded their site unknown about E-Bay as I've never sold anything before.

The blog.swalife.com server doesn't send a required intermediate certificate.
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
You can Copy and Paste the certificate text of the intermediate certificate (COMODO High-Assurance Secure Server CA) to a .cer text file and import the certificate in the Certificate Manager or use Firefox > New Tab > Open File.
DO NOT set any trust bits, those are only required for root certificates and should never be set for intermediate certificates.

Number of drive bays for HP ENVY Notebook - 17t-k200 CTO

I am receiving conflicting reports on the new HP Envy model. Does it have one or two drive bays?
This question was solved.
View Solution.

It has a single 2.5 inch bay and then an M.2 mSATA port.
Manual
Pages 63 and 70.
It is also one of the ones where access to the hard drive(s) or memory is major surgery.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Best Portable USM HDD for K450 hot-swap bay

I have read suggestions for the best portable USM HDD for K430 hot-swap bay, but I'm not sure if the K450 has the exact same hot-swap bay as the K430. Are the drives suggested for the K430 the same ones that would be best for the K450? I haven't even received my Lenovo K450 yet. I ordered it on Thursday and it will arrive on Monday Oct. 14, 2013. I just want to understand the hot-swap bay because I thought there was a way I could use a hard drive out of my old computer and put it in an external drive case and plug it right in. After reading the literature here in the community posts, that doesn't appear to be the purpose of the bay. I wish it would work that way because I wanted to easily offload some documents that are saved on my 500 GB Western Digital 3.5" hard drive that I would have liked to move to my new computer easily. My old computer is not working at all anymore, so I can't just drag and drop them from my extra 500 GB drive from that computer onto the new one.
Solved!
Go to Solution.

I purchased this same drive and it works great!! It is too bad that Lenovo didn't tell me this when I contacted their support team. It would have saved me a lot of time!!

A dropdown menu is blank when using e-bay

When a sale has been completed on e-bay it appears as a sold item listing item, buyer, price sold etc. and options to indicate monies received, posted, feedback etc. there is also a drop down menu for "more actions" This is showing nothing but an empty box.
I have cleared cookies and cache of history as recommended by e-bay.
Can anybody help, thank you.

Hi @506186 ,
I see that you are having issues scanning multiple PDF documents from the ADF. I will certainly do my best to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I would suggest to update the printer's firmware. HP Officejet Pro Firmware.
Try scanning as a JPEG, to see if you have the same results.
If it is software related, I would download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Using HP Diagnostic Tools for HP Printers in Windows.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Optical Out Drive Bay - Audigy

Hi,
Audigy ZS Platinum
Is it possible to connect a 5. <EM>Analog</EM> from the back of the audio card AND <a 5. receiver from the <EM>Optical Out</EM> from the Dri've Bay? Or will the Optical be disable?
Thanks in advance.
G.

hi,
of course it'ss possible to connect the analog out and the optical out simultaneously. the optical out won?t be switched off when you?re using the analog out first.
but please pay attention: if you want to get an encoded signal, e.g. a dolby digital signal from a dvd movie, by the optical out you have to set the option "digital bypass". in this case the dolby digital signal won?t be decoded by your audigy card and you won?t get an analog signal from the back!
;-), frank

HP envy 17 dual bays

I have a HP Envy and I would like to install a SSD in one of the bays. I have followed a post on how to do it.
The post talks about a HP Envy dv7t-7300. I can't find "dv7t-7300" as a model number anywhere. Where do I find the model number?
Also what SSD do I buy, sata , sata II, or sata III?
The system serial number is [edited by Moderator], if that's helpful.
This question was solved.
View Solution.

Hi @hpuser555 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in you post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Lumia 1520 Sim and MicroSD bay

Hello,
My Yellow 1520's sim and microSD bays are wobley and not secure. Is this common where they kind of wiggle around when you touch them when they are fully installed? I'm not sure if this is a common issue or if it is only unique to mine. If it is unique, can I perhaps get a replacement sim/sd door? Thanks!

don't believe it is, so if you are concerned about the build quality of the particular handset you received, take it back to your point of purchase. if they are being less than helpful, take your phone to Nokia Care for inspection.

" Error in Your Order " I need to bay a product (Adobe Premier Cs6) but when arrive (checkout) step ,

I need to bay a product (Adobe Premier Cs6) but when arrive (checkout) step , I received the below message: " Error in Your Order
The account was registered for a different country. Please sign out and sign in using an existing account for this country. "

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

After upgrading to Lion from Snow Leopard, mail server does not receive incoming email

After upgrading my server last night [2011.07.20] from Snow Leopard to Lion, my mail server settings went belly up. After toying around with the server, its certificates and what-not, I was able to get it running, but it is no longer receiving any emails [neither internally nor from Gmail, Yahoo, etc.].
I can send emails via SMTP just fine [using SSL] to external email accounts [and it doesn't complain when I address an email to an internal email account, but I can't verify that it's sending it to the internal email account because it won't receive!].
The Connection Doctor says that it is indeed connecting properly to the server [incoming = IMAP, outgoing = SMTP], so there is communication between Mail 5.0 [and also Thunderbird as well] and the mail server. The problem appears to be the mail server not receiving any emails - from internal or external addresses.
Anyone else having this problem or know of a fix for it?
Thanks!

Did you find a solution to this issue? My mail server is doing the same thing. I've tried six migrations now, and have a couple of tickets open, but they all have issues. I have worked around all of them except the mail server problem.
I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly. The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
I see errors like this littered in the logs:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
Do you see anything similar?

Locators in Receiving Bay

Similar Messages

Maybe you are looking for