Login Issues at the Forum

If I try to enter the forum area, it rejects my login with no error message. I've tried my VZ account creds and my forum creds. However, if I go to verizon.net, I can log in there and then click my way to the forum area. What's up with that???

Check your FF options/settings to see if you've enabled a notification when the page tries to redirect. If that box is ticked, untick it and try again.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Similar Messages

Help! - I don't see an answer to this synch issue in the forum

Hello,
I have a Palm TX the I have been snching to Palm desktop 6.02 on my desktop running Vista - no issues. For various reasons I must move to synching with MS outlook 2007. Initially i had no issues synching all Palm data during testing of the setup. Now the synch appears to be going fine as jusding by the Hotsynch windows during synch and no problems noted in the log. However, it doesn't appear to be actually transferring data to outlook. here is what I dd after the first test synchs where all data transferred fine. I deleted the test calendar and contact data in Outlook and emptied the deleted bin. Now when I attempt to transfer the data - the Hotsynch window progress bar spped by quickly as if there was nothing new to update and indeed the calendar and contacts remain empty. Yes, I am using the Outlook 2007 conduit, I have set the transfer options to Handheld overwrites desktop.. I do have 4 user files in outlook - 3 with different email adresses and one that is just a local storage folder area. I cannot find the transferred data in any of these locations. In fact, it seem like the Palm or Outlook rememmbers receiving the data once and will not update the outlook databse even though the calendar and contact items were all deleted. Is there a synch memory log that needs to be reset or delted and recreated? What can I do here?
Your help is greatly appreaciated.
Thanks,
Todd Backer
Post relates to: Palm TX

Todd, have you "thrown the switch" to tell Palm Desktop to direct the data to Outlook?
Start Button/All Programs/Palm/PIM Conduit Sync/Sync with Outlook.
You said you're "using the Outlook 2007 Conduit" -- does this mean you installed the Outlook 2007 Update on top of Palm Desktop 6.2.2? If so, that may be a problem as 6.2.2 comes with 2007 compatibility built into it!
I have read several posts recently where a user made the same mistake, and it caused some problems. If throwing the switch above does not fix things, I'd uninstall/reinstall Palm Desktop, but do NOT install the Outlook 2007 patch.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I'm seeing some issues on the Forum Again

When posting a few of my post i notice the Delete and Edit options are Missing again this needs to be Looked at Please!

B33 wrote:
When posting a few of my post i notice the Delete and Edit options are Missing again this needs to be Looked at Please!
Your problem is light in comparison when I have open tickets that make it that I can not even get into the forums from my verizon or from the community url because of
numerous "redirects" just posting now with a browser that can by-pass the errors but weeks of being told our IT department is working on it, is simply ludicrous.
It was one of the first things on learned when I made web pages. I offered to send the dopes in IT the syntax for a proper redirect. Week three and still
not fixed. wonder how long you will be waiting.

Request: Some response in the forums

I've noticed a lot of posts on broken installs, installation troubles, etc. are going completely unanswered in the forums. I would post my own issues with Fedora Core and SO7, and complete install failure of SO8 but it would be redundant and probably wouldn't be answered anyways.
So my request is that Sun actually answer some of the issues in the forums. I'm about to start looking for an alternative for my organization due to the lack of help / support.

Quote: Bill wrote on Thu, 24 November 2005 00:17----------------------------------------------------Jes se,
These are user-to-user forums, not Sun techsupport, as described in the FAQ and elsewhere.
Links to actual techsupport sources would be buried in the S.O. documentation.
Even the moderator hasn't logged in in 8 months...--------------------------------------------------- -
WHAT IS THE GOOD OF THAT, THEN?! HERE WE ARE AT THE FORUM-BRANCH "REQUEST FEATURE", YET SUN DOES NOT EVEN PURPORT TO LOOK AT OUR REQUESTS?!
THIS IS A QUITE UNSATISFACTORY SITUATION. (It used to be good, and IS INDEED OFF-PUTTING, even losing Sun custom to other Suites, perhaps.
I WANT SOMEBODY LIVING NEARBY TO SUN TO GO AND TURN THE TABLES ON THEM (talk sense into them)...!
Indeed, these criticisms and requests are NOT usually re. personal advice needed!!
I wish to complain bitterly -- in the name of many other users, I do suppose -- about the removal of facilities and functions on which we had come to rely and which, I submit SHOULD NEVER HAVE BEEN REMOVED...!
IF THIS IS NOT THE RIGHT PLACE TO COMMUNICATE WITH SUN'S STAFF, THEN THERE SHOULD BE A DIRECT LINK FROM HERE, NOT SOMETHING "BURIED IN THE DOCS." !!

Strange behaviour of the forum website

Since yesterday I observe a strange behaviour of the forum website:
There is a thread by Foto-Gabriela called "LR 3.4 crashes after some hours of work with very strange behaviour"
When I select "All threads" I cannot see this thread, but when I select "Open questions", it is visible.
It says that there are 6 answers. When I click on the thread, it comes up with only 3 answers visible.
What's going on, here?
WW

function(){return A.apply(null,[this].concat($A(arguments)))}
When I select "All threads" I cannot see this thread, but when I select "Open questions", it is visible.
It says that there are 6 answers. When I click on the thread, it comes up with only 3 answers visible.
This behavior, with posts appearing and disappearing, has been occurring for a few weeks, and is just one of many symptoms of the poor forum service provided to Adobe by Jive. You can keep abreast of such forum issues at the Forum Comments forum:
http://forums.adobe.com/community/general/forum_comments

Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
apart, piece by piece. Next step is probably losing my data or not loading it at all.
THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
weeks!
So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

The brandings are fun. Here's this same thread in a bunch of flavors:
https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

What's going on: jim.marion double login in the Forum

Folks and jim.marion,
Hello. It's July 31, 2013 today. It's Wednesday today.
About half an hour ago, I replied to jim.marion in my thread https://forums.oracle.com/thread/2561843 whose title is "Install PeopleTools 8.53 with Linux Issue: Client Windows and Server Linux".
I have been login in the Forum but when replied to jim.marion, a message box came up after his name: you are no longer login, please "login".
I click the "login" button and enter my account name and password in a rush to reply to jim.marion. I think this login is not neccessary ! I assume jim.marion has stealed my account name and password !
My questions are:
First, please ask jim.marion to explain what's going on ? !
Second, if jim.marion got my account name and password, please don't abuse my account name and password !
Third, how to change account password ? Does any folk confront the same issue ?
Thanks.

I have been trying to think of something witty to say on my behalf, but figured I better stop thinking and just reply to say, no, I haven't been logged in as you. At this time I have no desire to change my persona, but maybe you can change that by telling me a little about yourself? Do you have a yacht? How many homes do you own? Vacation condos? I could probably be persuaded to change me to be someone else... I'd have to think about it though.
Now, what is it that makes you think jim.marion stole your credentials? Did you see posts you didn't write? Are you basing your accusation strictly on the fact that you were logged out when trying to reply to jim.marion? I read your post a couple of times, and that is all it says: you tried to reply to jim.marion and the forum told you that you were logged out. I'm not sure that is enough to convict jim.marion. Perhaps you were trying to log in as jim.marion? Perhaps I should be accusing you? Just kidding, of course. Honestly, I don't mind if you answer a few questions on the forum as me because I will get the points.
I'm pretty sure that your OTN forum account is tied to all other oracle.com accounts, including MyO support, OTN, OpenWorld, etc, so change your password at any of these locations and it should propagate.
Do you have any more details? Not that I can fix any of it. I am just curious as to why you think someone has your credentials.

Performance Issues with the Support Forum

Thank you for visiting the new HP Consumer Support Forums.
We know that the site is having intermittent performance issues. We are actively working on the issue and hope to have it resolved shortly.
See you on the boards.
GarenT
One of the HP Forum Admins.
Message Edited by DaniW on 11-21-2008 07:24 AM
HP Product Expert for the Officejet Pro X Series.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!

We have just completed an enhancement to the Forum and believe you should see much better site performance
THANKS!
DaniW
HP Forum Admin
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

When will the issue of unacceptable performance of the forums get resolved?

Obviously there are major problems nowadays when using the Forums.
Not only many times you don't even get it at all, getting the 'Experiencing technical problems' message, quite often it takes about 5 minutes to post a message, and after checking it appears three times.
Oracle can not say it is not aware of these issues, as they have been reported many times.
Apparently addressing these issues is not getting much priority.
For a professional company this is hardly acceptable.
Does Oracle plan to resolve the ongoing issues, or do they want people to learn to live with it, or simply go away, and not answer any questions anymore?
Just wondering.
Sybrand Bakker
Senior Oracle DBA

fyi
Similar behaviour reported in the forum thread "Posted three times automatically "
at Posted three times automatically
regards
Jan Vervecken

I had an issue when trying to register with the forums, but I am having problems speaking someone because I am not a "registered" member?

Dear forum member(s), I was excited at the possibilities that Firefox offered. I have been looking forward to researching on the forums, but I made a blunder when registering.
I changed my email password some time ago and forgot that I had done so. I also have a second email which is similar to my address I was registering and I think I was actually using my the second email information until I caught the mistake.
Shortly thereafter I received an email with my user ID but no password. I had been assuming that I would receive a onetime computer generated password, but I wasn’t sure how things were supposed to go. After closely studying the language of the email, I was led to the conclusion that I would login with my original information I had provided.
My final attempt to register failed and I can’t explain why. I am positive that I had the right user id and password and now I am in limbo. I registered with the "Add-ons" section in 15 minutes. I was never told I was banned, but I was never told I am now a member. Thanks for reading.
Sincerely,
reel4

Not at all. I have never posted to the forums. The only thing I have written is what you see in this thread. I registered at add-ons section and things were fine. I wanted to use the forums, because I like to learn what I can. The problems began when I tried to register at the forms. At first, I thought my login from add-ons would work at the forums. It didn't. I honestly don't know if there is separate login and validation for each firefox/mozilla section.
When I attempted to register with the forums, I messed up when trying to login because I made too many attempts. I was either using another password from a second email or I misread those weird words they use to make sure you are not a bot.
I don't know what exactly was written but they basically wanted to take a look at things. I felt that was reasonable. After all - I felt like a moron for not being able to read those contorted word tests.
Then they sent me my user id but with no new password so I assumed my current password was the same as the one I originally gave. Long story short, I tried to login again- all three times I failed. They never banned me or told me anything. I have not heard from anyone or thing. To It's like they have just walked away. I just don't understand what has happened and why no one will tell me anything. So... no - I am not banned. When I do bet blocked after I logoff, it has the same effect as a ban. I guess I have been ousted. I just wish this I could get this matter resolved. I changed my password and email so maybe that will keep around.
It's a strange situation and I am at loss for words. I even wrote the forum people an apology letter describing the facts above in details and apologizing for the inconvenience. I actually apologized for being an idiot.
One last thing - at the outset of the post - I told you they gave me one last opportunity to login and it failed. I know for a fact I had the information correct. I had even written my password somewhere else on the screen to where I could see each character to verify the pass word was correct and then cut and paste.
James - who knows what the future holds but I must thank you my friend. At the very least, I could tell my story. It is all so strange.

FORUM ISSUE? Threads say they are answered in the forum list

but when you open them, it says it is not answered. This is an example
[Exception Aggregation;

The thread is in "Assumed answered" state. Ian Waterman posed a question to the author (PokerKing) of the thread and never got a reply. So I assume that after some time a moderator set this to "Assumed answered". I do this on the CR .NET developer forums. If after 6 weeks +, there is no reply to our questions, I feel it is quite safe to assume the issue is either resolved or abandoned. Since there is no "Abandoned" state on the forums, "Assumed answered" is it.
New queries regarding the same issue should probably start with a new forum thread rather than asking PokerKing if he found an answer. More than likely, he will not answer as he abandoned his orginal thread in the 1st place.
Ludek

Login to the Forum

in the old forum there was a cookie which uses my login, so that I directly could see in the forum which postings are new and which updated.
Now I have to login each time when I start my browser.
Is this only in my browser a problem or is this the default-behavior now ?
Gerd
Message was edited by:
volberg

Yes I have seen that answer. I think this is ridiculous.
After all this is a just discussion forum, no high-security online banking or shopping site. No other web forum that I know requires a log in every time I visit it.
If it wasn't for this annoying login I would probably come here more often.

Login the forum

Every time I enter into the forum, I have to go thru login process. Can the website remember me so I do not need to login every time.

Hi, Odysseus1479 -
That happens to me, too, using IE 5 in OS 9.
However, the OP is referring to a different sequence. Try this - log out. Go to a Discussions page which shows you as being logged out, i.e., one which shows the "Welcome Guest" statement. Then click the "Log In" link - if it behaves in the manner being discussed, instead of being taken to the log in password-entry page, you'll be taken to an appropriate Discussions page (either the main/home page for Discussions or the parent category for the forum you're in when you click the log in link) which shows you as being logged in - and you will actually be logged in.
One concern with this behavior is that if the machine is accessible to others, just logging out is insufficient to guard against an unauthorized person being able to use the account - if the browser is not also quit, then all the interloper need do is click the log in link, and they will be logged in and will be able to post using the owner's account.

Where is the forum for TFS, I have found an issue related to its database I need help

Hello,
Where is the forum for TFS, I have found an issue related to its database I need help
One of the encrypted Stored Procedure is throwing an error and I have no
idea how to fix the problem.
EXEC dbo.InstallWorkItemWordsContains
FOR XML could not serialize the data for node 'nt_user_name' because it contains a character (0x0000) which is not allowed in XML. To retrieve this data using FOR XML, convert it to binary, varbinary or image
data type and use the BINARY BASE64 directive.
Msg 3616, Level 16, State 2, Line 1
An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.

Hello,
Here are the
Visual Studio Team Foundation Server forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Login Issues at the Forum

Similar Messages

Maybe you are looking for