Looking for a sound editing app I can sync between Mac and iPod Touch

I have old interviews I conducted as part of an old job. I want to put them on to my new iPod Touch to listen to while traveling. Since I am only interested in specific topics and passages I need to bookmark where in these hours-long interviews these passages are.
I can get these interviews from my Mac into my Touch easily with iTunes, but I cannot bookmark or make notations in iTunes. There is a plethora of apps that will playback and edit/bookmark sound files for the Touch, but all of the ones I have found will only do this for files recorded with that app and they will only upload or email to my Mac but not send files from Mac to the Touch.
If anyone has any thoughts on an app I have missed or a work around I would be forever grateful.

LAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
Still, only the public folder is visible.
By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
Message was edited by: Steve Dorsey

Similar Messages

  • Syncing prob:icons for apps won't sync from Mac to ipod touch G1

    I have a 1st Generation iPod touch, 32 GB and the latest version of iTunes on my MacBook Pro. I have tried several times to sync my laptop to my iPod...all goes well except it won't sync the icon pictures of my apps to my ipod...except 2 or 3. Please tell me what setting is wrong or what I can do to get the icon pictures on my iPod. Buying an updated iPod Touch may solve the problem, but that is not an option at the moment. This one is so old it doesn't have a cam or anything... but it still works very well.

    You say you have a 1G iPod. Those can only gas as high as iOS 3.1.3 that you get here:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
    However, not there are few apps still compatible with the 3.1.3. Many have been udated so theay are no lnoger compatible with th 3.1.3.
    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

  • I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    I work in a High School and I am looking for a new library system that runs on the mac and is not windows based, can anyone recommend anything?

    That's a very broad question and difficult to answer without knowing more about you requirements.
    Try starting on this page Category review: library management software for the Mac |Part I  and part II  to get a starting point.
    regards

  • TS4062 I'm stuck on "waiting for items to copy" when I try to sync my laptop and iPod touch. What can I do about this?

    I'm stuck on "waiting for items to copy" when I try to sync my laptop and iPod touch. It was fine until the latest update. It's very frustrating. What can I do about this?

    Hi maasailand giraffe,
    Welcome to the Support Communities!
    First of all, thanks for the detailed notes of the troubleshooting steps you've already tried.  It's hard to pinpoint exactly what is going on in your specific case, but I do have a few more ideas for you to try.
    Starting with just one of your iPads, when you get stuck on the "waiting for items to copy" step, just disconnect your iPhone.  There are probably some orphaned or corrupt files that need to be addressed.  I would suggest closing all of your open apps and then backing your iPad up to iCloud.  Then review the articles below to move or delete any big files on your device.  These can include Voice Memos (iPhone), music, photos on your camera roll, photos or videos that are attached to your Messages, email attachments, etc.
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/HT1867
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/TS1503?viewlocale=en_US
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Remember that you can download any content you have purchased directly to your iPad.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    If you need to sync from iTunes, check your settings in the Summary tab to be sure you are only syncing items you have placed a checkmark in front of.
    iOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Give this a try on one of your iPads, and hopefully these steps will work for your other devices as well.
    Cheers,
    Judy

  • I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now I have iMac and have changed to IMAP from POP3 so I can sync. between iMac and iPad but how?

    I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now that I have iMac I have changed the account type to IMAP from POP3 so I can sync. between iMac and iPad but how?
    I do receive emails into my iMac for which I have 3 email accounts but am struggling on how synchronise between iMac and iPad so that both are up to date at all times.  I have also set up a iCloud email account thinking this was the way to go but have drawn a blank.
    Any help would be very much appreciated.

    Linc Davis,
    I have set up my email address both within my iMac and my ISP as IMAP accounts and I receive all emails without problem on my iMac. I have also set up an iCloud email address using my iMac.
    I have enabled the email within "setting" on my iPad and have used the iCloud account.  I have sent emails from the iMac to iPad using the iCloud account address and vice versa.  I have also sent emails from the iPad to the iMac using my non-iCloud email address and they have gotten through.
    The one thing I would like to have is for the iPad "mail" mailboxes to mimic the iMac "mail" mailboxes and both to be "in sync".  I am not really interested in using the iCloud email address for my email but would really like to use my "normal" addresses as these are what most people know me by.
    Do I need to set additional accounts within the iPad which are the same as the email accounts I have within the iMac and my ISP?  I have reached the end of my knowledge as regards email synchronsing.
    Thanks

  • Looking for a sound editing expert

    I have a message from 1995 that was recorded on my then tape answering machine. Unfortunately I did not dub the tape to my then LC III using a audio cable, and the original tape is gone. Before the message was destroyed I recorded it to my computer using my LC III's then external mic. Not as nice as the plaintalk mic I had on my Performa 6360 but it worked.
    There is a song that is playing in the background of this message that I really want to find out the name of. I no longer have any contact with the person leaving this message and frankly I do not even know if she is alive, so asking her would be impossible.
    I come here because I thought that perhaps someone here can soften the message and find a way to elliminate the his that one hears. Doing such may help me find the artist. But since I lack Sound Edit Pro, or any other professional sound editing software and the know how I cannot.
    The audio file is here.
    http://johnw.freeshell.org/audio/messagefromrb.zip
    The audio is in system sound (as this was the standard mac format when this was recorded).
    Thanks to any that can help
    John

    Johannes,
    You can certainly do it in GarageBand, although not the most ideal method I guess:
    Open Garageband. Drag and drop the MP3 into the Garageband window and it will import the file. Highlight/Play the track and choose where you want to edit the track using the play marker. Choose Edit->Split to separate the bits of the track you want (repeat as appropriate). Next highlight the bits of the track you don't want to keep (you can hold down Shift to highlight multiple sections) and press delete (you may need to click off the track and back on to the bits you're deleting) - this should leave you with the bit of the track you want.
    When you have finished you can export it to iTunes: File->Export to iTunes. The file in iTunes is an AIF file that you can then convert to MP3 again (and do what you like with!)
    Alternatively, you could try Audacity, a free Sound Editor, at: http://audacity.sourceforge.net/ (I've not used it myself yet, but I'm guessing it's a more direct method!).
    I hope that helps,
    Jon

  • My server keeps telling me that I have an update for 10.10.1 and that I should look for it in the app store. I do that and am not finding anything that makes the update notification go away. I have installed an update the app store says I need.

    I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.

    I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
    Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

  • I bought an app that can't run on my iPod Touch because it is too old. Can I gift the app to someone else or get a refund?

    I have an iPod Touch 4th Generation. I didn't even realize the new iPod Touch 5 had come out, or that my device would not support the newest iOS.
    Recently, an app came out that I was looking forward to for months: "The Walk" by Six to Start (same folks who did the excellent "Zombies, Run!" app). I'm pregnant and I was hoping to have the app to encourage me to get back into my walking habit once I recovered from childbirth, so I bought it. Unfortunately, there was no warning or indication that this app would NOT work on my iPod Touch 4, and nothing to inform me that iOS 7 wouldn't be supported on my device. The app requires iOS 7 or higher to run, so it won't work on my iPod Touch at all. I didn't realize any of this until I tried to install it.
    So now I have this app that I paid for, but have never used, and CAN never use (unless I shell out $300+ for a new device, which I cannot do, as a stay-at-home parent-to-be with no income of my own anymore). I'm annoyed that I can't use this app that I really wanted, but it would help if I could at least get a refund or maybe send the app to someone who CAN use it.
    Is there anything I can do at this point, or do I just have to live with the fact that I wasted money on an app that I can't use?

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am looking for a fool-proof way to share files between Mac 10.6 and Win 7

    I need to share files BOTH WAYS between Mac OS 10.6 (latest rev - 10.6.3 at the time of this post) and Windows 7 Premium. Both computers are on a private network and both are on the same workgroup.
    I followed this tutorial:
    http://macs.about.com/od/filesharing/ss/file-sharing-with-snow-leopard-win7.htm
    and I got part of the way there. This tutorial shows me how to set up sharing using the "Sharing" pref pane. I set up a few folders for sharing to specific users (me) from the PC. I set permissions properly, and enabled SMB. Everything was by the book (I have shared between XP and older macs in the past, this is not totally new to me).
    For some reason, my Win 7 box is only able to see my public folder. I can set that folder (using the sharing panel in OSX) to read and write, so I can move files to and from it in Win7, but none of the other folders I shared on my Mac are available in Win7.
    I am accessing my shares in Win7 like this:
    \\192.168.123.130\Desktop
    that's my Mac's static IP and then the Desktop is one of my shared folders on the Mac.
    When I type that, I get an error in Win7 that says that folder is not accessible, and that I may not have permission. I am not prompted for a username/password at any point in the process.
    the only way I am able to access the Mac's public folder is because I type "\\192.168.123.130" in Windows 7 and I am presented with a list of shared printers on my Mac and then the public folder. My other Mac shares are not listed there.
    What am I doing wrong?
    Oh, one more thing. Is there a good tutorial anywhere for sharing Win7 folders to my Mac? All the ones I have found are not working.
    God, I really hate Windows sometimes.
    Thanks
    -----------S

    LAN Manager authentication level was already set to "Send LM & NTLM - use NTLMv2 session security if negotiated" according to a web tutorial. I changed it to the option you recommended above.
    Still, only the public folder is visible.
    By the way - this is a brand new install of Windows 7. Almost nothing has been altered from its stock just-installed state.
    It is connected to my Mac via a cat-6 ethernet cable which is plugged into my Mac Pro's second ethernet port. I did this because the PC is a Maya workstation, and I do not want to slow it down by installing all of our corporation's IT-required software that slows our systems down. It is not connected to the open internet in any way - just file sharing to my Mac.
    My Mac is 192.168.123.130, the Win7 box is 192.168.123.132. Both have a subnet of 255.255.255.0 and a gateway of 192.168.123.130. I am UNABLE to ping the PC from the Mac. I am ABLE to ping the Mac from the PC.
    Message was edited by: Steve Dorsey

  • Video app crashing & Can't load videos to Ipod Touch 5.1.1

    My video app on my IPod touch (4th Gen 64GB) with 5.1.1 keeps on crashing.  I read that this is not an uncommon problem.  I click on the video app and a white screen shows up for a second, then the app crashes and reverts back to the home screen.  This is the only app that is not working.
    I have tried the following so far:
    Reboot by using the red slider button
    Reboot by holding the home and off button for 10sec.  Apple logo appears and it reboots
    Shut down the video app after double clicking the home button and deleting the open apps
    I even did a complete "Reset all Setting" and then used my ITunes back up to load all the data back on.
    I tried to delete all movies on ITunes and load a new one. - won't show up when I search for the video on the IPod
    I tired to down load a movie from ICloud - won't show up when I search for the video on the IPod after the download
    In ITunes the videos that I try to load to the IPod show up on the right menu bar under movies, but they are grayed out.
    The one thing I have not tried for obvious reason is the complete wipe and start from scratch by doing the reset from ITunes and loading all apps and setting to the IPod all over again.  I was hoping to avoid that pain...
    Now, I don't use the Video app much, and could potential wait for OS 6 that is supposed to come out in the fall.  That might load a new video app.  Unfortunately, I can't delete the video app as it is part of the original set up.
    Any tips?  What will I lose with a compete wipe and how long will that take?
    Thanks for your help

    I tried the restore from backup and it did not work.  I think I'll just wait until iOS6 and watch movies on my IPad.  Don't want to do the factory restore if possible.
    Any other tips are welcome!

  • After resetting devices apps don't sync between iTunes and devices

    I use Windows iTunes 11.0.1.12 in Windows 8 together with an iPad 3 w/ 6.1 and an iPhone 4S w/ 6.1.1.
    As my app collection grew too much I decided it was time to start over from scratch. So I deleted all apps within the iTunes library and reseted my devices, telling them to be configured as New Device when the question was asked whether I wanted to use a backup of the device. Then for a while I downloaded apps to the devices directly on the devices without using iTunes.
    All seemed to be nice until I connected the iPhone to the computer to sync it, mainly for backing up the apps on the devices. But this is not happening. I can sync as often as I like, apps which I downloaded on the devices are not copied to iTunes' library when I sync the device. Likewise apps that I obtained within iTunes are not copied to the devices when I sync.
    Does anybody know how I could fix this?

    I have the exact same problem. Help!

  • Can't message or FaceTime between ipad2 and iPod touch with same apple id

    Posted this on the iPad page also.  I got a ipad2, my husband loves it but too big and bulky, we get him the iPod touch tonight.  I set his up using the same apple id because we truly want to share everything, BUT want to be able to message and FaceTime one another.  Works fine to begin with, but soon realize that we cant FaceTime using same e-mail, realize I can assign him a different e-mail.  do this, doesn't work, so try the trouble shooting on apple support, turn off face time and messaging, because I'm setting it up for both,  Somehow it locks me out of message and FaceTime completely, that I had to reset my password, now it will let me login using that apple id, but not allow me to use either my orignal or secondary e-mail that I did verify.  FaceTime just keeps sending me back in to the apple id log in screen.  I thought no matter what you were able to login on both devices using the same id, but I can't for some reason!  Thanks!

    I ended up resetting all of the content and settings back to factory standard, then starting over.  no issues after that.  I'm just glad that we hdan't done too much after purchase!

  • Can't message or FaceTime between iPad2 and iPod touch on same apple I'd

    Here's my story.   Have an iPad2, works great, love it.  husband loved it too, but big and bulky, he goes with the iPod touch.  Tonight we set his up using the same apple id, because we want it to be simple and we truly want to share everything.  BUT, we want to be able to FaceTime and message one another.  Obviously realized we couldn't when the other was always busy, so I use an addtional e-mail to assign to him.  When it didn't take initally, I think ok, I need to turn off iMessage and FaceTime to get them to reset.  when I go to log back in, our apple id wasnt recognized and I eventually reset our password as a last ditch effort.  That gets me to the next screen, "what e-mail address do I want to use?"  I choose the secondary one, but it acts as if it hasn't been verified, but I've checked my settings information and it has been,  I've actually deleted and verified it twice now. I even tried the main e-mail address.  I've also powered off the touch too.  So what am I doing wrong, because at this point I can't even get messages or FaceTime to work on the touch.  I do not want to remove my log in from my iPad for fear of it locking me out there as well, but I need help! At a minimum I should be able to get our messages from both devices!  Thanks!

    I decided to reset the iPod touch to factory new settings and then it worked fine.  I have no idea what glitch I came across, but am glad that I can now FaceTime and message with my husband!

  • Some apps not working on iphone 3gs and ipod touch

    Since upgrading to latest software on all ipod touches and iphone 3gs; some of my apps appear but I cannot get them to work. I've done all I can to get my apps to open and work. Any ideas?

    I also get "cannot connect to iMessage server please try again."  I get this when I go to view my account.

  • How can I get an audiobook's playback position synced between Mac and iPhone?

    I have several Audible audiobooks, both on my iMac and on my iPhone. I listen to the audiobook on either the computer or the phone, depending on the circumstances. Both the iMac and the iPhone will independently remember the playback position within the audiobook, but I cannot get them to sync those playback positions to each other. So if I'm on chapter 2 on the iMac, listen for a couple of hours, and end at chapter 4, then the Mac will remember the correct playback position when I return to the book, but if I sync the iPhone to the Mac, and check the audiobook on the phone, it is still at the playback position it was the last time I listened to the book on the phone. Should the playbook position in the audiobook sync when the phone is synced to the computer via iTunes? I've tried both wired and wireless syncs, and that doesn't seem to make a difference on my case. Should this work, and if so, is there a particular setting that I'm missing?

    I am tracking the movement of various objects by subtracting the current image from the previous image and displaying the result.  Anything that moves is white and anything that doesn't is black.  I then have vision assistant give me a list of particles and their pixel positions based on certain criteria.  I then use the data from my two cameras pointing at 45 degrees inward in order to triangulate the object's 3-D position in space (this takes a few steps).  Then I use the frame rate of the camera and the scalar distance between an object in multiple frames to determine its scalar and vector velocities.  All of this is done in real time.
    I  was originally having issues with the pixel positions but have since wrote a vi that interprets a matrix of the pixel positions which then feeds them into my position/velocity vi.
    The vi I attached is built to work with my "bitflow alta frame grabber" so feel free to ask questions if anything is not understood.
    My new task has been to develop a way to only track one object at a time, and have that object be the same object in both cameras. 
    Questions or comments welcomed 
    Attachments:
    continuous grab example_chad.vi ‏45 KB

Maybe you are looking for

  • Can I use a SATA cable from a 2007 MacBook Pro for an SSD in a 2011 MacBook Pro?

    Trying to replace the optical drive on my MacBook Pro with an SSD. The only SATA cable I have is from a 2007 model. Will that work? Also, I can't find a good sled for the drive... Will literally taping it in place suffice until I find such a sled?

  • Installing MacOS X on a Blue G3

    I tried to install MacOS X on a Blue G3. The Mac started up from the install DVD, but then tells me that MacOS X does not work on this type of machine. According to the Apple website, this should work. Could anyone tell me what I am doing wrong? Than

  • Can't play iPhone songs/podcasts in the car via iPod Menu?

    Greetings, I have an iPhone 5 iOS version 8.1. The iPod menu in the car (2009/'10 Altima) recognizes my iPhone and displays the songs and podcasts well. But when i click on a file i want to play, it cant play it and i have to do it manually from my i

  • Sync Calendar with Windows Live Mail from Windows 7 Starter

    I want to sync my BB with my netbook.  I have succeeded syncing with Windows Live Mail Contacts but not with Calendar.  The only possibility offered by the desktop software is ASCII.  How do I sync with the Calendar? Blackberry Curve 8330 Device Soft

  • Library collaboration not working

    I'm trying to share libraries in CC however when I go to do this it keeps returning with "An unexpected error occurred. Please try again". It's not only on my system, but also the people I want to collaborate with as well in various browsers (Safari,