Lost Designer "new connection" option after fix pack install

Post Author: INE
CA Forum: Authentication
Hi ! everyone,
I'm new in BOXIR2 and need all the help anyone can give me.
The problem is ; after updating to the lasted Service Pack and correspondent Fix ( SP3 ; FP3.3 ), the Designer "create new connection option" doesn't work.
Is there a solution besides removing the updates?
Thanks in advance .

Post Author: TAZ
CA Forum: Authentication
Sounds like the install of the patch either failed partially or you ran into a bug. Open a case with support (deployment team) and see if they can reproduce. I tested on FP 3.4 and it works fine.
Regards,
Tim

Similar Messages

Sybase connection tab not showing in New connection option in SQL developer

Hi,
I do not see a Sybase connection tab in New connection option in SQL developer 2.1 where as it was available in ver 1.5
Why is that? how to fix it?

Hi,
Have you installed the JTDS JDBC driver yet into SQL Developer.
This is required before you get the connection tab for SQL Server and Sybase.
You can install the JTDS driver from the Check For Updates action.
Regards,
Dermot
SQL Developer Team

Lost Windows 7 boot option after creating new partition

First of all im new to Mac os.
i have installed windows 7 using boot camp and after it i tried to create a new partition from the main mac partition and it was created successfullly however now the windows 7 boot option is not available for some reason.
how can i have this option back?

You broke it by adding the extra partition, remove Boot Camp (read the directions as to how) and start again. Do not add partitions next time.
Do not use Disk Utility to remove the Boot Camp Partition, use it to remove any extra partitions.
Backup your machine now.

Lost Open Internet Connection option for wireless on my tool bar

Does anyone know how I can bring back the Open Internet Connection option on my tool bar? I'm hoping if I can open that it will help me solve why I can't connect to the land line in my office. [email protected]

Open *System Preferences* and the choose Network. Pick Airport. At the bottom next to the Options button see if the *Show AirPort status in menu bar* is checked. Check it and it should pop back where it was.
If it's PPPoE click it and there will be a similar choice to show it in the menu bar.
Message was edited by: First Magus

Installing new iphone stops after 20% of installing process

I tried to install a new iphone 4s, right out of the box. Buyed a separate phone and a buyed a new sim only card. After activiting the sim card by the provider, putting the in the sim card, unlocking the phone, the installing started. We choose to set back a a back up of a new ipad4. After an half hour the progress status bar of the installing didn't move any more. Waiting a night long did not show any progress any more. What to do now?

Got a tip from friend: pushing the sleep - and home knop at the time for a seconds. System resets and is ready to go.

Lost paper and color option after Os X installation

Hello,
in order to work with "the Gimp" I have installed X11 application yesterday on my iMac, not the best think I have done but... Os X reinstalled box version of my iMac 20" and then upgraded automatically to X.4.11, with all security, java, quicktime upgrades.
This morning I wanted to print with my Photosmart 8050 but no printing drivers where found. so I reinstalled it, once with printer connected with USB the other without.
Conclusion, same issue, I have in my printing menu, no way to change aper settings nor color setting, it look like a standard windows. Moreover, there is a strikedthrough item called "HP Photosmart PDE", when I click on it it says "this application is not compatible with your computer, ask your printer vendor to give you a good version." and it prints bellow "3.1" twice.
I have read in main post that 3.3 version of driver is included in Mac Os 10.4, so whats going up? Why my system was not able to find the printer from scratch after refresh this morning, why isn't there any better version than 3.1 in HP's web site? When I ask for an update in HP, it says there is not update for my system.
I trashed pref, restarted several time, refresh printing spool, reinstalled several time, but still nothing help in choosing paper or color like before.
I can still print without any control of previous item, .... but this is not the best of work. fortunately it is a home desktop... and I am not printing everyday, but...it is new year's time, and I have to print the card....
Any help would be appreciated.
Best regards and very best wishes for this new year,
François

Hello,
Thank you for our answer, I have looked through the forum and haven't found any answer, unfortunately. I installed driver with both unconnected and off printer.
What bothers me a little is that I have a hard time to understand where this driver is sitting on my hard drive, to check what driver version exists.
in this article it says 3.3 : http://docs.info.apple.com/article.html?artnum=303057
when I install it from HP it says 3.1...
Best regards,
François

OLAP universe cannot use SSO after Fix Pack 2.3

hi
our dev box can use OLAP universe with SSO authenticantion, after I apply FP2.3 this does not work any more
and I get the following error: DBD UNABLE TO CONNECT SAP BW SERVER INCOMPLETE LOGON DATA,
anyone encounter same issue
thanks

Hi Andreas Madsen
I log a case with SAP, and they point me to the same SAP note.
Basically what they trying to say is, once you install Xcelisius on the server, and applied SP2 and FP2.X you are stuffed.
Since your error is only on your client, then you should consider removing all the BO software on your client and reinstall it agian from scratch.
For me, I need to rebuild the whole server from ground up.
I asked for a special fix, but was rejected
I was advised to install Xcelsius and CR on server for troubleshooting purposes, but seem like this is really a bad idea now.

Has anyone else lost their personal hotspot option after updating to iOS 6.1?

I updated to the new iOS last night, and when I went to use my AT&T personal hotspot today, I noticed that it's missing from my settings menu. Any tips on how to get it back? I called AT&T and they told me that everything is fine on their end and therefore it must be an Apple issue. :-(
-Alison

See if this helps you get them back and lets you add them again.
Quit the Safari app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Bluetooth connectivity problems after iOS 5 install

Like may others who upgraded to ios 5 and found it was full of problems I to had issue with my handsfree in the car.
I have a Clarion unit and it worked fine although I could not download contacts and it would not list tracks playing from the phone however it did receive,make calls and do what handsfree is meant to.
I downloaded ios5 yesterday and like thousands of other people I found that although the Clarion unit connects with the iphone as soon as a call comes in or you try to make an outgoing call it would lose the bluetooth connection and revert to the call being continued on the iphone.
Having tried many different things to fix it I eventually pressed the on/off button together with the large button with the square on it until the Apple icon appears on the screen and the phone switches off and reboots. When you press the buttons first it will ask if you want to switch off, keep pressing the buttons until the icon appears and the phone switches off properly and reboots.
I went out to try it and so far so good it seems to work, hopefully this will resolve the issues.
Another problem I had was my iphone seemed to thinl I had headphones plugged into it and although you could make a call and the receiving end could hear you, you couldnt hear them.
A visit to the Apple store 35 miles away and 3 technicians, several reboots, a complete wipe and reinstall and taking the phone away to "have a proper look" and nothing!
The best they could do is give me a new iphone at nearly £200. I declined.
Later that evening my son was playing with the phone and took a picture and guess what? It no longer thought that headphones were connected!
It would seem Apple has slighlty lost its way in making easy to use performance systems. When issues arise in updates it has produced, Apple completely ignores them and lets down thousands of loyal customers resulting in their integrity being severely damaged.
Its not all about flooding the market with Apple products, its about selling to new and retaining existing customers so they reinvest again. If they continue to ignore problems and what customers are complaining about then how long does it take until people grow tired of Apple technology that doesnt work and buy elsewhere?

I have noticed the same thing! Any suggestions??? I also notice that when I uncheck the boxes for not including music videos and voice memos the size of the music folder increases, and it does it so much so that I exceed the space on my phone.

No boot option after Windows 7 install on Mac Pro

Hi,
I have problem and it is very frustrating.
My configuration
Mac Pro 1.1 2x2.66
RAM 5 GB
HDs
Bay1 500GB (have a Mac OSx 10.6)
Bay2 250GB (install Windows 7 Ultimate 64bit)
Bay3 250GB (in raid Mac OSX 10.6.6) primary system
Bay4 250GB (in raid Mac OSX 10.6.6)
I have install Windows 7 via Bootcamp from system 10.6.6 and format and install Windows 7 on HD in Bay2. After installation I try to choose which operating system I want to run (with option key) but nothing happen.
It was grey screen without apple logo and system boot to Windows 7 only.
I try everything to boot with different options (key shift,x,c,...) but nothing happen. I can only boot with windows 7 and if is the windows 7 DVD in drive first ask to boot with DVD, after that boot on Windows 7.
I try to put Mac OS system DVD but still don't want to run.
I also try to remove HD from Bay1(macosx) and Bay2 (windows7) and boot from Raid HD and I have error that there is no boot system.
In windows 7 I run Paragon HFS+ and I can see HD500 in Bay1 but cant see in Bay3 and 4 (RAID hd). In disk utility I can see all hard drives.
I try to reset PRAM but while booting what ever I press nothing happens and boot only windows 7.
I need solution for this problem, please help me with this issue, thx

Another thing that might be close...
I've installed Win7 64-bit on a second HDD. It is Ok to choose boot with 'option' key, but another option is missing: while in win7 apple's bootcamp control panel shows both MacHD and Win7 bootable partitions, so I can tell 'software way' to boot to win or to Snow Leo. It's OK. However when I open 'startup disk' in OS X there's only Mac HD so if I need to reboot to windows I can't just do it with several clicks. I actually have to shut down OS X, wait for boot screen, press option and then wait for the boot options to appear and them choose. It's 'a bit' annoying, let alone windows version of bootcamp seems to do the job smarter. And it really is a good thing to choose "reboot into desired OS" with a click and go to kitchen for tea or something and not seat in front of the machine waiting for boot screen...
Am I missing something? Is it done the other way then 'system preferences>startup disk'?

Several times a month, when I go to open Firefox, it says "wait installing new updates". After they are installed, Firefox won't open, it says "page not found." I have to then reload Firefox. How can I stop these updates?

Before Firefox open the little window opens saying"wait installing new updates." Then after when opening Firefox, my home page says "can't find this page. I have plugged in the address: http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official and it Firefox still won't open. I have to run the Firefox setup 3.6.3 on my desktop, to get Firefox to open on my home page. I would like to stop these automatic Updates from running; how?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

Help, I lost my system adminstrator account after archive and install

I did an archive and install and checked 'preserve users and network settings'. Prior to install I had two accounts: mine (adminstrator) and my son's. My iTunes and iPhoto are all on my account. After install, my normal desk top appeared. Software update informed me I had updates to download. I started the process and the password window appeared, but would not accept my password. I checked the users in the right hand corner of the menu bar and only my son's account appeared. When I clicked on that, a log-in window appeared (and my desktop disappeared). The only log-in option is my son's account. I can log into his account ok, but mine no longer shows up. I tried to access my account info in the previous system folder, but my son's account does not have sufficient access rights. How can I get my account back?
As a side note, I went to my old mac (a power pc G4 iMac) and could no longer log-in to iTunes Store or to .Mac. I changed my Apple ID password so I can now log into .Mac and the iTunes store. I don't know how to get my adminstrator account back on my Intel mac. My old Mac cannot be upgraded to Leopard and has no airport card.

Same thing happened to me! Now when I want to delete apps I get a window demanding my administrator password. I give it, but that is no longer correct. Actually, I suspect it is but the Administrator name has changed, but I have no idea what it now is. I tried to use the change password utility on the install disk, but it's just exactly that: a password changer, it won't change the administrator name, or even tell you what it is.
Any help would be greatly appreciated

Re-install option after corrupt initial install

Greetings, How do I re-install AI CC after it's been uninstalled because the initial install was corrupt? AI isn't availbale for download again in the app section of CC. Thanks

Watertech,
You should run the Cleaner Tool before trying to install again.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
If you still have trouble, it may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up

New install - Do I install all Service Packs & Fix Packs

Hi.
I just installed Engage 2008 to replace my 4.5 version. I see there is 1 service pack and 3 fix pack versions available. Should I be installing all 4 of these or just the service pack and the most recent fix pack? Please advise.
Thanks!

Hi Janice,
First, check your help / about in Xcelsius 2008. What is the build number? Depending on what it ends with will help determine what route to take.
-If it ends in 121, then run the Service Pack 1 installer. The installer will replace your existing install with Service Pack 1, which will then yield the build number ending in 247. From here you can install Fix Pack 1.
-If it ends in 247, then you can just go ahead and install Fix Pack1.
In both cases, after Fix Pack 1 is installed, the end result should yield build version 12,1,1,344.
Hope that helps,
-david
edit: sorry, it looks like Sirisha beat me to it.
Edited by: David Lopez on Nov 19, 2008 12:58 PM

I am having trouble with my Mac Mini's ethernet connection. Defining a new network interface shows no ethernet adaptor. Reloading SL from DVD repaired. But SL update lost ethernet again. Will Lion Fix?

I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

Lost Designer "new connection" option after fix pack install

Similar Messages

Maybe you are looking for