Lowest Information In BIW?
Hi Gurus I came across a question in an Interview i.e What is the lowest level of data in BIW? anybody Help me out?/
Hi ,
Info object is the BW object that holds the data at the lowest level, and data at lowest level is referred to as the granularity of the data. In BW it is an Info object as you can not store the data into a smaller object within BW... the lowest level at which the data is stored is at an info object level.
Hope this helps.
Regards,
Shilpa
Similar Messages
-
Hello,
We have attached Questionnaires to Activities and Service Processes.
I would like to know the following
1) which data sources i need to extract to BIW
2) how is the link between the transaction and the survey maintained i am aware of the FM "CRM_SURVEY_DATA_GET"
3) Since survey value is in xml how do i get it to text?
I have also seen the thread in sdn but am still unclear
I want to do get the information in BIW
Pls let me know what needs to be doneHello Dominic,
Maybe this can help:
http://help.sap.com/saphelp_crm50/helpdata/en/7a/05efffc58c45e7b61a7282e62de0f4/frameset.htm
Regards,
Frédéric -
when trying to retract information from BIW to Funds Management, what does the following error mean:
Source type \CLASS=CL_ABAP_ELEMDESCR is not compatible, for the purposes of assignment, with target type \CLASS=CL_ABAP_STRUCTDESCR
Message no. RS_EXCEPTION000.Look at SAP NOTE : 1108424 , 701941
This is similar to your error ..
Symptom
You are using an application in CRM release 2007 and on a view that uses a table (thtmlb:tableView or thtmlb:cellerator) you get an exception:
Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_ABAP_TABLEDESCR is not compatible, for the purposes of assignment, with target type \CLASS=CL_ABAP_ELEMDESCR.
Method: CL_THTMLB_CELLERATOR=>GET_TABLE_COMPONENTS.
Reason and Prerequisites
The reason for this dump is that the table is defined without any column definitions, neither via the corresponding tag parameter nor via an iterator class. In this case the thtmlb:cellerator tag tries to get the columns from the table assigned to the tags table attribute. If this contains deep structures or tables the dump occurs -
Regarding difference between netweaver and WAS
can anyone tell me the difference between SAP netweaver and web application server???
actualy i have no idea regarding this topic.Could anyone help me to solve this asap.please reply to me urgently.
Edited by: Nishigandha Misra on Apr 10, 2008 2:11 PMhi
SAP net weaver is a platform which work as foundation for integration of components of SAP with each other ,
WAS is one of them (component)
other are like
SAP Enterprise Portal
SAP Business Information Warehouse ( BIW )
SAP Exchange Infrastructure
SAP Knowledge Management ( KM )
SAP Mobile Infrastructure Not yet fully released
SAP Master Data Management ( MDM )
SAP Composite Application Framework
SAP Life Cycle Management
The fragrance/essence of integration of all of the above in a unified development platform is called SAP NetWeaver. So, the name Integrated Development Environment ( IDE ) inherited for SAP NetWeaver.
SAP NetWeaver provides,
an open integration Ex: Platform independent,
an extended application platform Ex: xApps,
permits the integration of the Enterprise Services Architecture (ESA),
an unified business processes across technological boundaries,
integration of applications as needed, and
access and edit simple information easily and in a structured manner.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 5:35 PM -
Seid dem neuen IOS habe ich Probleme mit der Anzeige - ein Teil der Anzeige ist ausserhalb des sichtbaren Bildschirmes, sobald ich auf eine andere App gehe ist es sekundenweise i.O. und dann vergrössert sich die Anzeige so, daß ich z.B. die untere Zeile - Telefon/Mail/Musik/Nachrichten nicht mehr sehen kann.
Since loading IOS 5 i have a Problem with the screen. I can´t see all. The Screen is too small for the information given and so for example i can´t see the lowest information about telephone/mail/music/news. This screen-enlargement is only temporary and not wanted!com.kaspersky.kext.kimul.44 44
com.kaspersky.nke 1.0.1d41
com.kaspersky.kext.klif 3.0.0d23
Uninstall the Kaspersky anti virus software. Instructions here > How to uninstall Kaspersky Security for Mac
Then restart your Mac.
Kaspersky has caused other Mac users kernel panics as well noted from the result of an Apple Support Communities search here.
If you want to use anti virus software on your Mac, install Sophos (free) as recommended here. -
Regarding BIW Certification information
hi,
This is srikanth from United Kingdom .Basically im living in UK since last two years. Recently I learned SAP-BIW in India and i came to UK for searching job in SAP-BIW .
I am planning to write down the SAP-BIW Certification Exam .I am preparing my own so can any one please help me regarding BIW certification,I don't have BIW experience before.So with out experience which BIW certification I have to prepare . So I want Exam details ,Syllabus and any sample questions like that.I am in confusion which certification in BIW I have to prepare. I searched in this forum but i didn't get full information regarding certification.........
I am new to this forum.so pls pls anyone help me in detail..............and my sap ..E-Mail id:[email protected]
thanks
srikanth
londonHi Srikanth,
You can check the certification link for more information:
http://service.sap.com/certification
Note the +++ signs for each topic and the legend at the end
SAP Consultant Certification
Solution Consultant SAP NetWeaver 2004s Business Intelligence
Software components: SAP NetWeaver 2004s Business Intelligence
Certification exam is included in course TBW45 and is also in separat certification events at many locations.
Certification ID (Booking code): C_TBW45_04S
Certification duration: 3 hours
Number of certification questions: 80
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TBW10 (BI Enterprise Data Warehousing), TBW20 (BI Reporting & Query Design), TBW41
(BI Extraction with UDI & XI and APD), TBW42 (BI Advanced Enterprise Data Warehousing & Reporting), TBW45 (BI Integrated Planning)
Alternative Project Team Training courses for certification preparation: BW310 (BI - Enterprise Data Warehousing), BW305 (BI - Enterprise Reporting, Query & Analysis (Part I)), BW350 (BI - Data Aquisition), BW360 (BI - Performance & Administration), BW365 (BI - User Management & Authorizations), BW330 (BI - Modeling & Implementation), BW306 (BI - Enterprise Reporting, Query & Analysis (Part II)), BW370 (BI - Integrated Planning)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant SAP NetWeaver 2004s Business Intelligence verifies the knowledge in the area of the SAP NetWeaver for the consultant profile Business Intelligence. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
Enterprise Reporting, Query and Analysis
1. BEx Design Tools (++)
Query Definition
o Conceptual Query Design
o Reporting Scenarios
o InfoProviders
Analytical Engine
o Variables
o Calculated and Restricted Key Figures
o Navigation
o Hierarchies
o Exceptions and Conditions
o Other features of the Analytical Engine
o Report-Report Interface
BEx Query Designer
o Query Properties
o Cell Editor
o Other features of the Query Designer
BEx Report Designer
o Basic Concepts
o Report Styles and Formatting
o Report Layouts
BEx Web Application Designer
o Web Items
o Context Menu
o Structuring the Layout of Web Templates
o Chart Designer
o Command Wizard
o Web Items
o Chart Capabilities
o Integration with the SAP NetWeaver Portal
2. BEx Reporting Tools
BEx Web Analyzer
o Overview
o Data Access
o Data Analysis
BEx Analyzer
o Navigation Features
o Excel Integration
o Workbook Design
3. General BEx Features and Information Broadcasting
Printing and Export
BEx Broadcaster
o Overview
o Functionality
o Events, Time Points
o BI Alerts and the Central Alert Framework (SAP Web Application Server)
o Data Bursting
Document Integration
Business Planning and Analytical Services
4. Planning Model Design and Planning Functions
Planning Modeling
Aggregation Levels
Variable Wizard
Concept of Locking
Characteristic Relationships and Data Slices
Planning Sequences
Planning Functions
5. Input Enabled Queries, Planning Applications and Miscellaneous topics in Business Planning
Create an input ready query
Filter in Planning Applications
Web Application for Planning
Implementation options for BI Integrated Planning
Status & Tracking System
Performance & Sizing
6. Analysis Process Design
Analysis Process Designer (APD) and Data Mining
Enterprise Data Warehousing
7. Modeling the Enterprise Data Warehouse (+++)
Concepts in Enterprise Data Warehousing
Data Modeling
o Using Different InfoProvider Types
o MultiProviders
o Characteristics and Attributes
o Navigation and Display Attributes
o Tracking History
o Star Schema in SAP NetWeaver BI
InfoObjects
o Definition
o Texts, Attributes, Hierarchies
o Compounded InfoObjects InfoProviders
InfoProviders
o InfoCubes
o DataStore Objects
o InfoSets
o VirtualProviders
Data Warehousing Workbench
Meta Data Repository
BI Content
Remodeling Toolbox
Source System
(New) Data Sources
Transformations
(New) InfoSources
Data Acquisition: SAP Source Systems
o DataSources
o Service API
o Delta Management
o Generic Extraction
o Enhancing BI Content DataSources
Data Acquisition:
o Flat File
o Web Service DataSources and SAP NetWeaver XI / SAP NetWeaver BI Integration
o Database Connect
o Universal Data Connect and Universal Data Integration
8. Running the Enterprise Data Warehouse (++)
Direct Access
Real Time Data Acquisition
Administrator Cockpit and BI Statistics
Performance Optimization
o BI Accelerator
o Aggregates
o Query Design
Scheduling and Monitoring
o InfoPackages
o Data Transfer Processes
o Process Chains
o Monitor
User Management
9. Analysis Authorizations
Analysis Authorizations in SAP NetWeaver BI
Amount of questions by topic (as percentage of test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Assign points if it helps,
Regards,
Mani -
I just got a supposedly new HDD, which shows the following when I run smartctl -x on it:
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 33693 -
# 3 Short offline Completed without error 00% 33604 -
# 4 Short offline Completed without error 00% 26564 -
# 5 Short offline Completed without error 00% 25516 -
# 6 Short offline Completed without error 00% 443 -
# 7 Short offline Completed without error 00% 0 -
This sure looks like the HDD was in use, and quite long at that, but then got it's lifetime counter somehow reset.
The rest of the smartctl log looks fine, no errors, no reallocated sectors... but seeing how the lifetime counter was seemingly reset - can I trust that information at all?
Full log below:
smartctl 6.2 2013-07-26 r3841 [x86_64-w64-mingw32-win8.1] (sf-6.2-1)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar A7K2000
Device Model: Hitachi HUA722020ALA331
Serial Number: YBKHEW6F
LU WWN Device Id: 5 000cca 221f14c2c
Firmware Version: JKAOA3FD
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Jan 30 14:32:08 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22036) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 367) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 1
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 0
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--C- 100 100 000 - 1
194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max 10/31)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 63 Current Device Internal Status Data log
0x80 GPL R/W 63 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 33693 -
# 3 Short offline Completed without error 00% 33604 -
# 4 Short offline Completed without error 00% 26564 -
# 5 Short offline Completed without error 00% 25516 -
# 6 Short offline Completed without error 00% 443 -
# 7 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 10/28 Celsius
Lifetime Min/Max Temperature: 10/31 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (22)
Index Estimated Time Temperature Celsius
23 2015-01-30 12:25 29 **********
24 2015-01-30 12:26 29 **********
25 2015-01-30 12:27 30 ***********
... ..( 52 skipped). .. ***********
78 2015-01-30 13:20 30 ***********
79 2015-01-30 13:21 31 ************
... ..( 33 skipped). .. ************
113 2015-01-30 13:55 31 ************
114 2015-01-30 13:56 30 ***********
115 2015-01-30 13:57 30 ***********
116 2015-01-30 13:58 31 ************
117 2015-01-30 13:59 31 ************
118 2015-01-30 14:00 30 ***********
119 2015-01-30 14:01 31 ************
... ..( 8 skipped). .. ************
0 2015-01-30 14:10 31 ************
1 2015-01-30 14:11 ? -
2 2015-01-30 14:12 31 ************
... ..( 3 skipped). .. ************
6 2015-01-30 14:16 31 ************
7 2015-01-30 14:17 ? -
8 2015-01-30 14:18 11 -
9 2015-01-30 14:19 14 -
10 2015-01-30 14:20 15 -
11 2015-01-30 14:21 17 -
12 2015-01-30 14:22 18 -
13 2015-01-30 14:23 19 -
14 2015-01-30 14:24 20 *
15 2015-01-30 14:25 22 ***
16 2015-01-30 14:26 23 ****
17 2015-01-30 14:27 24 *****
18 2015-01-30 14:28 24 *****
19 2015-01-30 14:29 25 ******
20 2015-01-30 14:30 26 *******
21 2015-01-30 14:31 27 ********
22 2015-01-30 14:32 28 *********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 1) ==
1 0x008 4 1 Lifetime Power-On Resets
1 0x010 4 0 Power-on Hours
1 0x018 6 0 Logical Sectors Written
1 0x020 6 0 Number of Write Commands
1 0x028 6 1254388 Logical Sectors Read
1 0x030 6 12 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 0 Spindle Motor Power-on Hours
3 0x010 4 0 Head Flying Hours
3 0x018 4 1 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 1 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 28 Current Temperature
5 0x010 1 -~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 31 Highest Temperature
5 0x028 1 10 Lowest Temperature
5 0x030 1 -~ Highest Average Short Term Temperature
5 0x038 1 -~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 4 Number of Hardware Resets
6 0x010 4 0 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FISWell, should I return it? Any experience about what the lifetime of an enterprise HDD is?
The long surface scan (using seatools) didn't cause any SMART errors:
smartctl 6.3 2014-07-26 r3976 [x86_64-w64-mingw32-win8.1] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Ultrastar A7K2000
Device Model: Hitachi HUA722020ALA331
Serial Number: YBKHEW6F
LU WWN Device Id: 5 000cca 221f14c2c
Firmware Version: JKAOA3FD
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Jan 30 21:25:16 2015 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (22036) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 367) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 100 100 054 - 0
3 Spin_Up_Time POS--- 100 100 024 - 0
4 Start_Stop_Count -O--C- 100 100 000 - 2
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 020 - 0
9 Power_On_Hours -O--C- 100 100 000 - 6
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 100 100 000 - 2
193 Load_Cycle_Count -O--C- 100 100 000 - 2
194 Temperature_Celsius -O---- 130 130 000 - 46 (Min/Max 10/47)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 63 Current Device Internal Status Data log
0x80 GPL R/W 63 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 0 -
# 3 Short offline Completed without error 00% 33693 -
# 4 Short offline Completed without error 00% 33604 -
# 5 Short offline Completed without error 00% 26564 -
# 6 Short offline Completed without error 00% 25516 -
# 7 Short offline Completed without error 00% 443 -
# 8 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 46 Celsius
Power Cycle Min/Max Temperature: 36/47 Celsius
Lifetime Min/Max Temperature: 10/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (51)
Index Estimated Time Temperature Celsius
52 2015-01-30 19:18 46 ***************************
... ..( 93 skipped). .. ***************************
18 2015-01-30 20:52 46 ***************************
19 2015-01-30 20:53 45 **************************
... ..( 17 skipped). .. **************************
37 2015-01-30 21:11 45 **************************
38 2015-01-30 21:12 46 ***************************
... ..( 12 skipped). .. ***************************
51 2015-01-30 21:25 46 ***************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 1) ==
1 0x008 4 2 Lifetime Power-On Resets
1 0x010 4 7 Power-on Hours
1 0x018 6 0 Logical Sectors Written
1 0x020 6 0 Number of Write Commands
1 0x028 6 4374861383 Logical Sectors Read
1 0x030 6 33771495 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 7 Spindle Motor Power-on Hours
3 0x010 4 7 Head Flying Hours
3 0x018 4 2 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 21 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 2 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 45 Current Temperature
5 0x010 1 -~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 47 Highest Temperature
5 0x028 1 10 Lowest Temperature
5 0x030 1 -~ Highest Average Short Term Temperature
5 0x038 1 -~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 8 Number of Hardware Resets
6 0x010 4 0 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Is that enough to say that the drive is in perfect health (at the moment, at least)?
I've also looked at the drive with a hex editor and it's cleanly zeroed, so they did that part right as well.
I don't think the seller will reply before monday, but I'm kind of interested in what they say.
edit: interesting. Hardware resets count rose from 4 to 8. Can't seem to find what that value means from searching.
Last edited by Soukyuu (2015-01-30 20:34:03) -
Hi Gurus,
May I know the various methods to confine planning level at the lowest level and re-define the Primitive methods where business currently uses in excel sheet and plans at all level into demand planning with a minimum and lowest level by which the business reduces manual work and increases visibility and planning.
Example: Business currently plans at customer Hierarchies which has about 6 levels, product has Hierarchies at 5 levels, location hierarchies at 3 level in excel sheet and on monthly level for an year and then quarterly for 2 years and yearly basis for one year. This we need to confine to lowest level of customer, product and location.
HEIRARCHY LEVEL
PRODUCT
CUSTOMER
LOCATION
LEVEL
P0
C0
L0
HIGHEST
1
P1
C1
L1
2
P2
C2
L2
3
P3
C3
L3
4
P4
C4
SOLD-TO
5
P5
C5
6
P6
CUSTOMER
LOWEST
SKU
PLANNING LEVEL
PRODUCT
CUSTOMER
LOCATION(DISTRIBUTION CHANNEL)
HEIRARCHY LEVEL
P6
C5
L3
LOWEST LEVEL
WHERE
P6
SKU
C5
CUSTOMER
L3
SOLD-TO- PARTY
CVC
P6_C5_L3
So in this case, the cvc are created at lowest level of planning, at P6_C5_L3.
Now how to convenience the business that they need to do the planning at this level for planning, as the rest levels will be aggregated automatically in demand planning.
Is the grouping level place a major role? if so how to do that as the business says for some products they do at p4_c2_L1 level for some they do at P5_C4_L2 level.
Could someone guide us in giving some solution which ease the business need of planning at any level. Hope you have understood my requirement by the above example. If not do let me know, so that I may try to inform by further details. Thanks in advance.
PraveenPraveen,
Not really sure what the question is. You say you want to 'confine' planning to the most detailed level, but you also want to support planning at an intermediate level.
No matter. DP transparently supports planning at any/all levels simultaneously. Data in DP is always stored at the detail level, no matter which level (or combination of levels) the forecast is entered at.
Creation of the Demand Forecast - SAP Library
Best Regards,
DB49 -
Hi .
I am facing problem in displaying a particular layout in ALV.
the layout is as follows:
1. Header part
2. Line item
3. There is field customer and after every change of customer do page break and display information like how many record read and how many record processed. below is brief detail about how to get read and processed record.
I have two internal table say table1 and table2.
Looping table1
increase the counter as counter_read = counter_read +1.
compare the record with table2.
if matches
increase the counter as counter_process = counter_process + 1.
4. At the end of report display a error log.
to get the error log we will follow the above logic and if record not matched then display as error record.
Please help ASAP to find the solution.
Thanks in advanceThere is a knowledge base article C2014229 (1210986 - Subreports do not have a Page Header) , but instead of providing link I will just copy content here:
Symptom
Since subreports are objects in the Main Report, they do not contain Page Headers. How can you create a fake page header for subreports?
Resolution
To create a fake page header for subreports, use the following steps:
1. In the subreport, create a formula:
@FakePageHeader
//name of formula
WhileReadingRecords;
2. Go to the 'Insert' menu and click 'Group'. Select the @FakePageHeader formula.
3. Select the 'Repeat Group Header on Each New Page' option, and click 'OK'.
This inserts a new group at the lowest, or innermost, grouping level. You will need to move this group to the highest, or outermost, grouping level.
4. Go to 'Report' menu and click 'Group Expert'. Use the up arrow to move this newest group up to the top of the list.
5. Move all the headers that you would like repeated into this Header for the @FakePageHeader group.
Hope it will help. -
How to Integrate BIW WAD with EP6.0
Hello Everybody,
I need to design and deploy BW applications using WAD and so need to integrate BIW System, Portal and WAD. Is there any suitable documentation which explains all the steps required for such an integration b/w Portal and BIW System and WAD. A quick reply is highly appreciated and well rewarded.
Thanks in advance,
Regards,
Sarabjeet.The support to include NetWeaver 2004s based BEx Web Applications Java is now available in NetWeaver 2004 EP 6.0 from SPS15 onwards. Here is the relevant information on how to use the feature:
SP15: <a href="https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=940773">Note 940773</a>
SP16: <a href="https://notescsr.wdf.sap.corp/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=0000941017">note 941017</a>
SP17: already included in standard shipment
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team -
Need help identifying controller information in hyperdraw
Hello,
Sorry if this is a dumb questions, but I'm in the middle of a project and need help ASAP. In one of my tracks (Real Guitar) there is some form of controller information present at the start of the track and I have no clue what it is! Is there a preference/key command that shows all data in hyperdraw, and then lets you select it (similar to the way the matrix editor works if you double click in the background, and then click on a specific note?)
Thanks in advance for any help you can provide!Jonathan,
I use the method that Jim suggested. I have the "H" key programmed for autodefine. (I've also got another two keys programmed to simply turn hyperdraw on and off for the selected region(s)). Autodefine is very cool. If there are, say, 4 different controllers in the track, hitting H the first time will show you the lowest-numbered controller; hit it again and it shows you the next higher number controller, and so on. The controller number is displayed in the lower LH area of the hyperdraw display for each region.
If a track contains controller information for multiple channels, you'll see two numeric values in the lower LH corner -- the controller number and MIDI channel for that controller, separated by a comma. -
Need information on Dimension levels
Hello everyone specially Igor,
Last time i asked about filling of Dimension and fact. And Mr. Igor explained well to me. Now i want to know that how many level must be in a hierarcy like Mr. Igor gave me an example that in a Customer dimension the cust_id level will be the last level in the hierarchy and cust_type_id level will be that last level in the other hierarchy and one level can have more columns (attributs)other then id e.g cust_name, address, age etc etc., so now i want to ask that if we put all these columns (attributs) in one level of a hierarchy then what will bethe other columns (attributes).
For example i have a Loan module of a bank to make then how many dimensions will be there like i made seperate dimensions for customer personal informaton, customer address, customer contact informtaion, loan details, loan types etc. If i follow the above instructions then i will put Customer personal information, customer address, customer contact infotmaion in one dimension with three seperate hierarchies with this inforamtion and other dimension named loan right. Which means i will have two to thre dimendsions in my whole loam modules.
Please tell me with example about the levels in hierarchy and hierarcies in a dimension.
Here i also want to specify that i dont have anyresource to learn OWB in my whole area.
Thanks you and wating for you repaly.
Mustafa Ali Qizilbash
[email protected]Mustafa,
As per your brief description, you would have at least 3 dimensions: Customer, Loan and Time (time is almost always there). The customer personal information, customer address and customer contact infotmaion would not go to separate hierarchies, but to the same hierarchy and possibly to the same level (the lowest one - customer) of the customer hierarchy, because they belong to a single customer. Therefore, you would have a customet key (customer_id) and customer_name, customer_address and cust_contact_info on the first level of the customer hierarchy as attributes. What levels you would have above the customer level in your hierarchy depends on how you want to classify your customer data. For example, if you want to classify customers by geographical area (and don't want to have a separate geography dimension), you could have a geography hierarchy within the customer dimension with levels like cust_city (with cust_city_id key and attributes like city_name, city_population ...), cust_region etc. up to the highest level of the hierarchy that would probably be cust_total. From the reporting tool you will then be able to navigate data from the customer total, down to regions, cities and finally to a single customer. You could have multiple hierarchies in the customer dimension if you decide to classify customers in more that one way. For example, apart from classifying the customers geographically, you might also want to classify the customers by income level. You would then have an income hierarchy which would again start from the customer level (common to the income and geography hierarchies), and then continue up with levels like income_class etc. up to customer total (which would again be common to the two hierarchies).
Similarly (depending on your business requirements) for your loan dimension, you would have one or more hierarchies, each with several levels.
For the time dimension, OWB provides an out of the box dimension (see in the directory <owb_home>\owb\misc\time) with a hierarchy that goes from days to months to quarters to years.
Regards:
Igor -
LG Cosmos 2 - volume is too loud even on lowest setting
Hi, I recently got the LG Cosmos 2 and so far I'm fairly pleased with it. The only thing that bothers me is that the volume is very loud even when I set it to the lowest setting. This applies to both the external speaker volume and the headphones volume when playing ringtones and music.
I'm just wondering if this is normal and if there is something I can do to lower it down even further.I found a great solution this afternoon, but this will be of use only for ringtones that you've added to the phone because unfortunately most of the time the phone's own ringtones are locked due to either Verizon's rules and/or the rules of the phone manufacturer.
One of the ways of adjusting the volume is a program called Replay Gain. Perhaps analogous to the many versions of Linux, other software writers have implemented Replay Gain in different ways. Each implementation has differing advantages and disadvantages.
My interpretation is that these versions fall under one of two categories:
In the first category, the program writes the information about the volume change to either an APE tag or an ID3 tag, and the music player reads the information in the tag to determine what volume to use. The disadvantage is that this is not a universal solution because the music player used needs to be able to recognize these tags; otherwise, that tag information means nothing to that music player and the volume will be played at its original level.
The program I used today called MP3Gain falls in the second category. Programs in this second category alter the audio file, BUT they don't alter the audio in any way other than its volume; to keep this post shorter, see the next post for greater detail about this alteration. MP3Gain in addition writes information about the volume change and about what the original volume was in an APE tag if you wish to use MP3Gain to undo the volume change. If I did a poor job of summarizing that, there is a lot of great information out there about MP3Gain if you do a google search.
I downloaded MP3Gain from here (link). While some of the various implementations of Replay Gain can be used on more than one audio format, MP3Gain can be used only on MP3 files.
step 1:
add the mp3 ringtones to MP3Gain and click the button "Track Analysis". The information that's important to us for our use is the number that is now in the column "Volume" which is a measurement in db. If the button says "Album Analysis", click the down arrow next to it and select "Track Analysis"
step 2:
At the top where you see "Target 'Normal' Volume", enter the volume that you want the mp3 ringtone changed to. Personally, a value of 91 puts me in the ballpark. If that's not low enough or not high enough, then you can just repeat these steps and apply a different value.
step 3:
Click the button "Track Gain" since I want my several mp3 ringtones to have an identical volume. If the button says "Album Gain" or "Constant Gain", click the down arrow next to it to select "Track Gain". MP3Gain's help file has excellent information about the difference between "Track Gain" and "Album Gain". I don't understand yet what "Constant Gain" is.
Step 4:
You're done.
I've read that older music players would not ignore the APE tag and would instead get confused by the presence of the APE tag and interpret it as audible noise. Our two models of Verizon non-smartphones don't seem to have any problems with the tags being left in. If by an unlikely chance either your phone or your music player plays the mp3 file with noise that wasn't there before, then you can turn off the use of the APE tag by choosing "Options" --> "Tags" --> "Ignore (do not read or write tags)". After turning this off you can still restore the volume to its original value if you had made a note of the original value when you clicked the "Track Analysis" button. Or just keep an unaltered backup copy of the mp3 ringtone. -
I dont get more than 2-2.5 Hours out of my MacBook Air (at lowest settings)
I have a serious problem with my MBA. I mainly use it to take notes at University. So my normal usage is: Screen brightness turned to the lowest possible point, WLAN+Bluetooth OFF and Word running.
How many hours do I get? If I'm lucky, 2.5! And I'm not surfing, I dont play any fancy games, I'm just taking notes. Most of the time the screen is completely turned off, because I dont take notes every 2 seconds.
How in the **** did Apple come up with 4.5h of wireless work? If I turn on the WLAN, set the brightness to 40% and surf the Web, I'm lucky if I get 1.5hours out of my battery.
According to iStat my battery life is at 88% with abou 60 cycles. But I'm seriously considdering to take my MBA back to the Apple Store, because it's pretty much useless for me right now with less than 2h of battery life.
Are you guys getting any better results? I googled and I found reviews that said they were able to surf the web for "close to 4 hours" with brightness at 40%. HOW is this possible???!You should definitely be getting more than 2 hours (or so) with the configuration you're currently using. Curious, what does your battery statistics look like... Give a full charge, start using it in the configuration you normal use it and copy/paste the info (after about 20 minutes of use).
Apple Logo > About This Mac > More Info > Hardware > Power
Model Information:
Serial Number: SMP-ASMB017-3921-665
Manufacturer: SMP
Device name: ASMB017
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0009
Hardware Revision: 0401
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 1331
Fully charged: No
Charging: No
Full charge capacity (mAh): 4908
Health Information:
Cycle count: 3
Condition: Good
Battery Installed: Yes
Amperage (mA): -919
Voltage (mV): 7409
Be curious to see the Amperage, Voltage, Full Charge capacity.
On a side note, I've seen significant battery improvement on my machine when backlight is set to max versus 20-30%. It's approximately 25-30 minutes of additional run time over a consecutive run time from 100% to 5% battery.
Secondly, AppleCare does NOT cover the battery replacement "for free." There are specific requirements that would qualify a battery for a replacement under the limited one-year warranty and AppleCare but it's not a "gimme." -
Hierarchy drill down issue at the lowest level
Hi,
In OBIEE 11.1.1.5 I face an issue with drill down to lowest level of presentation hierarchy (expanded by "+" in report). It happens only for combination of 2 dimensions presentation hierarchies in analytics report (parent-child organizational structure + level based product categorization). Aggregated date comes from OLAP but lowest level product information comes from relational database and this details are not displayed.
First I drill to particular sales rep in organizational structure. Then for that sales rep I need to drill down product hierarchy and it works except lowest level of details. At the lowest level of product hierarchy, query sent to database (I have it from logs) return proper results (checked directly in db) but report behaves the way like there are no details at the lowest level and product details are not displayed.
Both (Organizational structure, Product) dimension presentation hierarchies works ok at all levels when used separately. Also product hierarchy works well at all levels (including OLAP->relational drill) when used togather with other level-based hierarchies in subject area.
I am wondering what I could have done wrong...
Advices are very welcome!Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.
Maybe you are looking for
-
IPhoto will not open want me to "rebuild photo library" and restart
When I try to open iPhoto i get this error message: "Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and
-
Balance Brought Forward Customer Statement
Hi there, everyone Our company would like to print customer statements in a balance brought forward format. By "Balance Brought Forward" I mean that the statement starts with an Opening Balance (being the previous month's closing balance), then refle
-
How to create a mail client using JavaMail and please mention what other softwares are required to do so? What can we use to store the e-mail addresses? File or Database? How to send and recieve attachments using JavaMail? Is it possible If I am send
-
E-mail problems I'm experiencing
I don't know if they're related, but here are some things that I have noticed recently. (1) No more whoosh when I send an E-mail. (2) I can no longer send an E-mail to myself, at least I can't receive it. (3) I think that some of my E-mail to others
-
Posting lines Val gr code AGC val class A/ C dt A/C Cr Gain/loss from revaluation 1000 e 3030 4032020 4032020 Inventory posting 1000