Maintaining transaction sequence when End system is down

Dear All,
<b>Maintaining transaction sequence when systems are down.</b>
Scenario:
SAP(IDocs)--> XI --> DB
DB is up & running, so messages (msg1, msg2) sent by XI have been processed successfully by DB.
At a particular instance, DB is down and the messages (msg3, msg4) failed at receiver Adapter. With SP15, we got the feature of restarting these messages after a specific period of time. (Lets say after every 1hour).
After 5 minutes the DB is up and messages (msg5, msg6) sent by XI have been successfully processed by DB.
After 1 hour, the receiver adapter restarts the failed messages (msg3, msg4) and they get processed successfully.
Now the order in which messages have been processed on the DB:
Msg1, Msg2, Msg5, Msg6, Msg3,Msg4
As messages have not been processed in the sequence they have come from the source system, this would lead to DB inconsistencies.
Kindly suggest how we can overcome this in XI. I don't want to use another Message Oriented Middlware(MOM) like MSMQ, MQSI for this.
Regards,
Siva M

Hi Siva,
Please can you go through this blog which might help you resolve this issue
/people/vasanthakumar.balasubramani2/blog/2005/12/21/complete-reference-for-idoc-queuing-and-monitoring
Regards
Vijaya

Similar Messages

Transaction timeout when two system communicate by web service.

Currently, our application run under WLS 10, and exchange data with another system build on WLS 10 also by web service.
          These two system both set global transaction timeout through Console: Server-->Configuration-->JTA-->Timeout Seconds, set number is 1800s.
          Long time operation within one system is ok, never meet tracation timeout exception. But, when one system call another system via web service, always meet below exception(same operation run under wls 8.1 is ok):
          15-02-2008@17:35:56 ERROR leave : [[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [CTLeaveWebService@PSA] [B2E_CTLeave.Get_Leave_Info] Exception Occured, Failure creating new instance of RowMapper, org.apache.beehive.controls.api.ControlException: RowToObjectMapper: SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
          BEA1-067F39AED8C5E04484B3
          at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1419)
          at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1331)
          at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189)
          at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64)
          at weblogic.jdbc.wrapper.ResultSetMetaData.preInvocationHandler(ResultSetMetaData.java:37)
          at weblogic.jdbc.wrapper.ResultSetMetaData_oracle_jdbc_driver_OracleResultSetMetaData.getColumnCount(Unknown Source)
          at org.apache.beehive.controls.system.jdbc.RowToObjectMapper.<init>(RowToObjectMapper.java:63)
          at sun.reflect.GeneratedConstructorAccessor136.newInstance(Unknown Source)
          at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
          at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
          at org.apache.beehive.controls.system.jdbc.RowMapperFactory.getMapper(RowMapperFactory.java:160)
          at org.apache.beehive.controls.system.jdbc.RowMapperFactory.getRowMapper(RowMapperFactory.java:85)
          at org.apache.beehive.controls.system.jdbc.DefaultObjectResultSetMapper.arrayFromResultSet(DefaultObjectResultSetMapper.java:93)
          at org.apache.beehive.controls.system.jdbc.DefaultObjectResultSetMapper.mapToResultType(DefaultObjectResultSetMapper.java:61)
          at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:370)
          at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.invoke(JdbcControlImpl.java:228)
          at com.psa.citos.rms.leave.services.resouces.StaffLeaveDBBean.getLeaveDetailsByLvEmpIdStDtEndDtStatusInArray(StaffLeaveDBBean.java:198)
          at com.psa.citos.rms.leave.services.bizlogic.StaffLeaveServiceImpl.getLeaveDetailsByLvEmpIdStDtEndDt(StaffLeaveServiceImpl.java:276)
          at com.psa.citos.rms.leave.services.bizlogic.StaffLeaveServiceBean.getLeaveDetailsByLvEmpIdStDtEndDt(StaffLeaveServiceBean.java:1112)
          at com.psa.citos.rms.leave.services.bizlogic.LeaveServiceImpl.getLeaveDetailsByLvEmpIdStDtEndDt(LeaveServiceImpl.java:337)
          at com.psa.citos.rms.leave.services.bizlogic.LeaveServiceBean.getLeaveDetailsByLvEmpIdStDtEndDt(LeaveServiceBean.java:596)
          at com.psa.citos.rms.leave.facades.WebServiceFacadesImpl.getStaffLeaveInfoForRoster(WebServiceFacadesImpl.java:254)
          at com.psa.citos.rms.leave.facades.WebServiceFacadesBean.getStaffLeaveInfoForRoster(WebServiceFacadesBean.java:250)
          at com.psa.citos.rms.leave.webservice.CTLeaveWebService.getLeaveInfo(Unknown Source)
          at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          at java.lang.reflect.Method.invoke(Method.java:585)
          at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassComponent.java:99)
          at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(ComponentHandler.java:64)
          at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:123)
          at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:85)
          at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
          at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
          at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
          at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:257)
          at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:156)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
          at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
          at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
          at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3392)
          at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          at weblogic.security.service.SecurityManager.runAs(Unknown Source)
          at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
          at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
          at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
          [java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
          Data Sourse config:
          URL: jdbc:oracle:thin:@xxxxxx:1521:xxxxxx
          Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource
          Can help to advise what this exception cause and how to resolve?
          thanks and best regards.
          Edited by rendlut at 02/17/2008 7:29 PM
          Edited by rendlut at 02/17/2008 7:38 PM

r c wrote:
          > Currently, our application run under WLS 10, and exchange data with another system build on WLS 10 also by web service.
          > These two system both set global transaction timeout through Console: Server-->Configuration-->JTA-->Timeout Seconds, set number is 1800s.
          >
          > Long time operation within one system is ok, never meet tracation timeout exception. But, when one system call another system via web service, always meet below exception(same operation run under wls 8.1 is ok):
          >
          > 15-02-2008@17:35:56 ERROR leave : [[ACTIVE] ExecuteThread: '6' for queue: 'weblogic.kernel.Default (self-tuning)'] [CTLeaveWebService@PSA] [B2E_CTLeave.Get_Leave_Info] Exception Occured, Failure creating new instance of RowMapper, org.apache.beehive.controls.api.ControlException: RowToObjectMapper: SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
          > BEA1-067F39AED8C5E04484B3
          > at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1419)
          > at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1331)
          > at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189)
          > at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64)
          > at weblogic.jdbc.wrapper.ResultSetMetaData.preInvocationHandler(ResultSetMetaData.java:37)
          > at weblogic.jdbc.wrapper.ResultSetMetaData_oracle_jdbc_driver_OracleResultSetMetaData.getColumnCount(Unknown Source)
          > at org.apache.beehive.controls.system.jdbc.RowToObjectMapper.<init>(RowToObjectMapper.java:63)
          > at sun.reflect.GeneratedConstructorAccessor136.newInstance(Unknown Source)
          > at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
          > at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
          > at org.apache.beehive.controls.system.jdbc.RowMapperFactory.getMapper(RowMapperFactory.java:160)
          > at org.apache.beehive.controls.system.jdbc.RowMapperFactory.getRowMapper(RowMapperFactory.java:85)
          > at org.apache.beehive.controls.system.jdbc.DefaultObjectResultSetMapper.arrayFromResultSet(DefaultObjectResultSetMapper.java:93)
          > at org.apache.beehive.controls.system.jdbc.DefaultObjectResultSetMapper.mapToResultType(DefaultObjectResultSetMapper.java:61)
          > at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:370)
          > at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.invoke(JdbcControlImpl.java:228)
          > at com.psa.citos.rms.leave.services.resouces.StaffLeaveDBBean.getLeaveDetailsByLvEmpIdStDtEndDtStatusInArray(StaffLeaveDBBean.java:198)
          > at com.psa.citos.rms.leave.services.bizlogic.StaffLeaveServiceImpl.getLeaveDetailsByLvEmpIdStDtEndDt(StaffLeaveServiceImpl.java:276)
          > at com.psa.citos.rms.leave.services.bizlogic.StaffLeaveServiceBean.getLeaveDetailsByLvEmpIdStDtEndDt(StaffLeaveServiceBean.java:1112)
          > at com.psa.citos.rms.leave.services.bizlogic.LeaveServiceImpl.getLeaveDetailsByLvEmpIdStDtEndDt(LeaveServiceImpl.java:337)
          > at com.psa.citos.rms.leave.services.bizlogic.LeaveServiceBean.getLeaveDetailsByLvEmpIdStDtEndDt(LeaveServiceBean.java:596)
          > at com.psa.citos.rms.leave.facades.WebServiceFacadesImpl.getStaffLeaveInfoForRoster(WebServiceFacadesImpl.java:254)
          > at com.psa.citos.rms.leave.facades.WebServiceFacadesBean.getStaffLeaveInfoForRoster(WebServiceFacadesBean.java:250)
          > at com.psa.citos.rms.leave.webservice.CTLeaveWebService.getLeaveInfo(Unknown Source)
          > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          > at java.lang.reflect.Method.invoke(Method.java:585)
          > at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassComponent.java:99)
          > at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(ComponentHandler.java:64)
          > at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:123)
          > at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:85)
          > at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
          > at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
          > at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
          > at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:257)
          > at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:156)
          > at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
          > at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
          > at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
          > at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
          > at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
          > at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3392)
          > at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
          > at weblogic.security.service.SecurityManager.runAs(Unknown Source)
          > at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
          > at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
          > at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
          > at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
          > at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
          > [java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 30 seconds
          >
          > Data Sourse config:
          > URL: jdbc:oracle:thin:@xxxxxx:1521:xxxxxx
          > Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource
          >
          >
          > Can help to advise what this exception cause and how to resolve?
          >
          > thanks and best regards.
          >
          > --
          > Edited by rendlut at 02/17/2008 7:29 PM
          >
          > --
          > Edited by rendlut at 02/17/2008 7:38 PM
          In the console, you can set the JTA timeout to
          something more appropriate for your needs than
          the default 30 seconds.
          Joe

Retry logic for TCPIP eway, when backend system is down

I am a newbie in JCAPS. My requirement is to read a text file and then send it contents through a socket connection to backend system. The stream retrieved back from backend system (via socket connection) is to be stored in Oracle DB.
My Approach:
I am using Batch eway to read file and then send the contents to a JCAPS queue. I then have a JCD which reads this Queue and establishes connection with socket, the read contents are then written to Oracle.
I have 2 questions:
1. Is this approach correct? Do you recommend any optimized/better way (considering the requirement)?
2. If the backened system is down, wont the messages in queue be lost? How can we make sure that messages are delivered whenever backend system comes up?
Thanks,

Rajan,
You need to pick up a local file and shove it into an oracle database??
For a reliable system, I would recommend a JCAPS project that consists of:
2 JCDs, one doing the batch file get and the other doing the Oracle insert
1 JMS queue between the two JCDs (if your database connection goes down, or if something else goes wrong, your messages will be safe in this JMS queue)
I can point you towards some tutorials from Sun if you need help on this.
--Adam

Hi i am using thunderbird in my system and i add subfolders in my local folder but some how when my system shuts down my all folders got ideal

by some how my all folders got disappered while my system got shut and then when it restsrt i have to give path to local folders when they cam back by this problem my all emails come in inbox mot in my local folders pls resolve my problem.

''renuwali [[#question-1054698|said]]''
<blockquote>
by some how my all folders got disappered while my system got shut and then when it restsrt i have to give path to local folders when they cam back by this problem my all emails come in inbox mot in my local folders pls resolve my problem.
</blockquote>

CCMS not sending e-mail when system is down

I have installed solution manager 4.0 and configured it as a CEN to handle all CCMS alerts from our SAP systems (ECC5.0, BW, etc), these systems all have CCMS agents install and configured. The configurations work no problem. We get automatically notifications on a lots of events -- such as shortdumps, responses time, system log errors, etc. However, we never get e-mail notifications on following two situations:
1. System down -- when one system is down, we can see it availability is going to 0% on solution manager but we did not get e-mail, I am using MTE class "Availability_SysPercent_ABAP", it should send e-mail when it below 60%. But it never did even it's 0%. Also tried several other MTEs, but none of them work. Is this because when system is down, CCMS not work any more or something else?
2. Job cancel -- I am not what MTE class to use in order to send e-mail when some jobs are cancelled.
Any help are greatly appreciated.
Yujun Ran

I don't know if this is correct but my Execution is "Any server" and it works.
I assume you copied the same method for your central AR method. The person earlier who mentioned clients may have something. I don't use the CCMS_OnAlert_Email_V2 method so I'm not sure but I think the parameters need to have a user in 000 with an e-mail address in the user master in order to send. I don't think this is any different for the Central AR method which works for you so probably not the problem but double-check. I use the CCMS_Send_Alert_to_ALM_V2 method so my config will be a little different.
Is SAP_CCMS_MONI_BATCH_DP scheduled in CEN? Mine is in the working client but again, not sure if it matters.
Does the AR method you have assigned show up in RZ20>>Change mode>>View>>Method allocation?
Is the send job in SAPCONNECT scheduled, I believe it behaves differently with local and central AR's.
Message was edited by:
David Hill

How to get rid of maintaining transaction IDX2

Hy everybody,
is there a way to get rid of maintaining transaction IDX2, when an IDoc structure changes?
Thanks a lot,
Thomas

I have done some investigations and found the part in the idx2 where the structure is deleted...
      delete from idxsload where port    eq i_idxsload-port
                           and   idoctyp eq i_idxsload-idoctyp
                           and   cimtyp eq i_idxsload-cimtyp.
      delete from idxidocsyn where port    eq i_idxsload-port
                             and   idoctyp eq i_idxsload-idoctyp
                             and   cimtyp eq i_idxsload-cimtyp.
Do you think it is crazy to write a program which uses this lines of code?
Regards,
Thomas

What are the check points when SRM system is up after Basis maintenance

All,
When SRM system is down for Basis maintenance example down for Kernal upgrade.
What are the things we need to check when SRM is back online to ensure that the system functions properly.
Thanks,
Ravi

Build a Desktop Video Editing PC
-3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
-what PC to build http://forums.adobe.com/thread/947698
-2 how to build videos http://forums.adobe.com/thread/1104182
-another video http://forums.adobe.com/thread/1145366
-planning & Building http://ppbm7.com/index.php/intro-part-1
-memory for LGA2011 http://forums.adobe.com/thread/1098759
-an Adobe FAQ http://forums.adobe.com/thread/878520
-http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
-http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge+E/0xe9b142f408a2 b03ab88144a434e88de7.aspx
-several more links http://forums.adobe.com/thread/815798
-build tuning http://ppbm7.com/index.php/final-results

BI SYSTEM UP/DOWN

Hello,
Where can I find the BI 7.0 system down/up information like when the system was down?
When it restarted information?
Thanks

Hi Sachin,
On your <sid>adm's home there should be the log files:
stopsap_<hostname>_<system_number>.log
startsap_<hostname>_<system_number>.log
Additionally you can check the DB logs:
$ORACLE_HOME\saptrace\background\alert_ORASID.log
Hope this helps..
Amit

Hi there, I just signed up and put in all my information and when I got to the end it said we can't process your request at this time. Does that mean it didn't work or that the system is down right now?

Hello
I just signed up to start downloading music on my ipod and when I got to the end it said can't process now. Does that mean that the system is down or will I need to do this all over again?> Thank you

If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

PSE 10 system slows down when adding files to catalog

I recently switched from PSE 3 to PSE10 and had issues converting the catalog. I never did resolve those so I decided to start with creating a new catalog in PSE 10. My first session of adding photos worked fine. When I restarted the task the next day, I was asked in participating in making the product better by sharing information about my use with Adobe. I agreed to participate and very quickly noticed that my computer slowed considerably when adding photos from my hard drive. The process still worked but I experienced a dramatic increase in the time it took for photos to be added (e.g. the cursor spins for a couple of minutes while the task is working). I went under my account preferences and opted out of the product participation program but the problem has persisted. I rebooted the computer to see if that would help but it has not. I have turned off all media analysis and both optimized and repaired my catalog and while this has provided some improvement, there are still instances where the system slows down. Now it seems that every other folder's worth of pictures (does not matter how many photos) I add causes this delay.
I appreciate any help anyone can provide in determining why this slow down keeps occuring.
FYI, I am running a new Windows 7, 64-bit system with 8GB DDR-3-1066MHz, and 2 TB hard drive.

Have you also edited the Preferences (Performance) to increase the amount of RAM that PSE can use?
Do you have many background processes running? Having a single HDD means that everything running on your computer has to wait in the queue for disk access.
How many photos are you importing?
What file types are the photos?
How large are the photos?
Ken

ASE instance not available *** ERROR:ASE instance possibly left running when system went down(system crash?). Notify Database Administrator

Hi Gurus,
I made some changes in rz10 for client copy like:
icm/host_name_full [email protected]
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
icm/server_port_1
PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
icm/server_port_0
PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
login/no_automatic_user_sapstar 0
After to make changes effective, i stopsap & startsap.
But unfortunately db is not coming up. I checked startdb.log it showing
error as " ASE instance not available
*** ERROR:ASE instance possibly left running when system
went down(system crash?).
Notify Database Administrator."
Please help us to resolve this issue, i have also added startdb.log for
your reference.
Regards,
Piyush

Hi Piyush,
Did you solved this issue.
We are facing the same issue and only this thread is there in SCN for this issue.
If you solved this issue,Kindly share the solution.
Thanks and Regards,
Mathan A

What are the effects on BW when R/3 system is down?

Hi BW Experts,
What are the effects on BW system, when R/3 systems are down for maintenance?
And what care we need to take towards BW during the down time?
Thanks in advance.
Regards
Sunil.

Hi Sunil,
when R/3 system is down the BW daily loads & weekly loads will fail.
the best solution is you can reschedule the job when R/3 is Up.
You can cancel the running jobs by going through
SM37 -- > select that particular job --> JOB (in menu bar) --> select released --> schedule option.
Mama 10 points evvu mama
Regards,
Lakshman Kumar Ghattamaneni

Raising an Alert ,when the Legacy system is down

Hi,
I want to raise an Alert or some thing when my Source Legacy system is down.
My scenario is File -to - IDOC . I'm getting all the XML files from the FTP server. so, My source system is FTP srever . Due to network problem or some other problem my FTP server is getting down very frequently. Now i want to send this information to respected persons in a automated way.
Is there any option that know the Legacy server status , How can we know that FTP server is down .
Please suggest me some solution for this type of prblems.
Regards
Jain

Hi
You can use BPM and check whether the system is up or nt (using the Connection FM STFC_CONNECTION )
In case of system errors and application errors you can use alerts.
System error: Runtime errors, mapping errors , application system is down, Adapter engine is down etc....
application error: If you are checking some validations , if they fails you can throw alerts.
For application errors you use BPM.
You can raise alerts if mapping, receiver determination etc.. fails in the integartion engine. You need to configure alert rules for this. You can go to RWB->Alert Configuration->Where did the error occur? choose integration engine and you can see different error categories and error codes which can be configured using alert rules. Refer this michal's weblog for configuring the same..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Currently alerts for Adapter framework errors are not supported.
You can also raise an alerts from BPM for any mapping failures, send step system errors/application errors using fault messages (through exception branch).
Refer this weblog for configuring an alert in the BPM
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
hope this helps..
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 30, 2009 7:54 AM

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

How do i reload 10 4 x when my system will only shut down by holding down the power button. G4 Imac 17"

how do i reload 10 4 x when my system will only shut down by holding down the power button. G4 Imac 17"

Power down, hold the Mouse button AND the Option/alt button down at bootup, that should open the CD/DCD tray & you can insert your Install Disc, as well as giving you boot options.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Maintaining transaction sequence when End system is down

Similar Messages

Maybe you are looking for