Make sure impdp is running
i am using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi.
How can i make sure impdp is running?
V$session.message = SYS_IMPORT_TABLE_01: IMPORT : 0 out of 27824 MB done
I do not see size of segment increasing or free space in tablespace decreasing.
dba_datapump_jobs.state = Executing
select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='IAMAIN' and program like 'orac%'
and s.saddr = D.SADDR
SESSION_TYPE STATUS SECONDS_IN_WAIT WAIT_CLASS EVENT
MASTER ACTIVE 4719 Idle wait for unread message on broadcast channel
WORKER ACTIVE 0 User I/O direct path write
WORKER ACTIVE 49 Idle wait for unread message on broadcast channel
It does not have any blocking session , or lockwait.
Please suggest.
sybrand_b wrote:
And after how many seconds you think impdp doesn't work? 5? 2? 1?
I think you should observe a bit more patience. Give your keyboard some rest ;)
It takes a while before impdp has processed metadata.
Sybrand Bakker
Senior Oracle DBAThe tablespace size start reducing after 3 to 5 minutes interval but the job terninated adruptly. So I attach the job but now its 1 hour nothing is happening.
Edited by: spur230 on Jun 4, 2010 11:41 AM
Similar Messages
-
My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast
Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference? -
Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG -
I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance
The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.
-
Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
· We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
· And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
Thanks,
D.N. RanaHi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000 (26 Minutes)
"ReceiveTimeout"=dword:00dbba00 (240 Minutes)
"ServerInfoTimeout"=dword:00180000 (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana -
System 'CE3' is not available. Make sure it is running properly.
hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?
Thanks.Hi Rodrigo,
The HTTP error code 502 is 'Bad gateway'. I also experienced this once or twice when I configured a certain proxy (or proxy script) that wasn't able to resolve that host. Try bypassing the proxy or using a special proxy for your host CE3 in the Proxy Settings of your NWDS.
Cheers,
Martin -
How to make sure an applet runs with Java 5?
Hi all,
First let me say thanks for all the help in the past. You've help me go from noob to intermediate noob. I've just about finished my first applet game which can be checked out here .
Now I've been reading about problems with mac and 1.6. (note it works on Linux). I want to make sure that it runs fine and of course I don't own a mac. So I downloaded the 5 JDK. Selected it as the java platform in Netbeans, compiled and it ran fine.
Questions:
Do I have to always use 1.5 to compile and perhaps set it as default?
Since it works in 1.5, do I compile it with 1.6 and just upload?
I'm worried I'm not testing it correctly. I mean if I have both 1.5 and 1.6 installed on my machine, how to I make sure the applet is only using 1.5 to run?
Thanks
Darrincorlettk wrote:
I haven't got a clue RE your problem other than for max-portability you should compile with [-target 1.5|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html].
I must say I'm impressed, except I suspect my PC must be substantially faster than any of your test platforms... can you throttle it to CPU performance somehow? Or maybe it's just that my reflexes aren't what they once where.Thanks.
There seem to be two issues. The first is what people are using. This web stats shows pretty poor penetration of 1.6.
[http://www.statowl.com/java.php|http://www.statowl.com/java.php] Penetration: 54% with JRE1.6 + 19% with JRE 1.5. Total 73%.
The second is I've read that mac and 1.6 do not get along except on a 64bit platform.
So for applets there is not much choice but to compile on 1.5 for the broadest user base. I guess the good news is 1.4 and earlier are almost non-existent.
Edited by: Darrin.A on Apr 27, 2009 8:11 AM -
Hi All
Our user are getting below error when they try to connect from SmartView
Cannot Connect to the Provider. Make Sure It Is Running in the Specified Host/Port.Error(12031).
We are on 9.3.3 planning.our web server is WebSphere
Please suggest
Thanks,You might want to increase the timeout and check:
Smartview in Excel utilizes some Microsoft settings that it obtains From IE. When running on IE 7 or higher there are new settings that have a low default time out. You can increase these by following the instructions in the articles listed below
http://support.microsoft.com/kb/813827
http://support.microsoft.com/kb/181050
Make sure you have a safe backup of the windows registry before you do this .
1. Open the Registry (Start -> Run -> Regedit)
2. Locate the following section:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
3. Create the following new keys for DWORD with Hexadecimal values:
ReceiveTimeout and set it to 00dbba00
KeepAliveTimeout and set it to 00180000
ServerInfoTimeout and set it to 00180000
4.Disconnect and close the Smartview and launch a fresh connection
HTH-
Jasmine. -
Hello all:
I have an enterprise app and i need to make sure it runs all the time.
If the app is not running i should silently make sure it restarts again.
Any ideas on how it can be done. It is an enterprise app
ThanksHmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
How do I make sure I am running latest JRE on snow leopard?
I am running snow leopard, and I somehow changed my version of java or JRE (not sure which - or if they are the same).
But now, I want to be sure I'm running the most current versions.
how can I check the version and if not up to date, how do I update this?
thanksYou can use /Applications/Utilities/Java Preferences.app to check installed Java versions, and which version is default/preferred.
-
What do i have to do to make sure webex is running on firefox
this is what i get when i try to access a site on webex player
is not available for your computer's operating system. For information about system requirements, please refer to the FAQ support
go to faq no help
this is what is on the webex website
* Add an exception for the entire webex.com domain = *.webex.com.
o At the minimum, the following addresses should be added as exceptions: YOURSITENAME.webex.com and akamaicdn.webex.com.
* ActiveX and/or JavaScript will need to be allowed through the firewall and web browsers should be configured to not restrict ActiveX and/or JavaScript.
* We ask that WebEx sites are not cached (content, IP-path) on proxy servers.
how do i do this on firefox
''fixed the formatting to keep it on the page''Maddykins2 wrote:
Meg....I live on a boat and did not find actual walkie talkies that I liked and i phone has apps for that. Thanx......
I'm not sure why living on a boat necessitates a walkie-talkie app but if it's what you need, it's what you need. Sorry I can't help. -
Hi Everyone,
When i try to connect to a Essbase/Planning Server, i am getting below error while other users are able connect to Server without any issues.
My connection was fine till yesterday, i checked all updates of excel but no luck..
Could some one help me pls, thanks in advance!Posted same error in Essbase forums, so i am closing this topic here now.
-
I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
My OS is Windows XP version service pack 3. I even tried to install FF4 but it never get installed. As I mentioned my FF keeps trying to update itself but it gives the error message I provided in title. Now I don't have access to my FF browser and my life is stopped because I have all my passwords saved on FF. I restarted my notebook but it stills try to update itself giving the same error message. I can not also upgrade my Adobe reader 7.0.7 to 10 I have tried more than 10 times but it never gets upgraded. I had this Adobe problem since long time ago.
Run the Firefox program once as Administrator (right-click: Run as Administrator).<br />
If that doesn't help then do a clean reinstall.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala
Maybe you are looking for
-
Relationship about ATP check and credit check
Dear all, At present, we have credit control in sales order. The rule is : once the sales order's amount over 1 dollar, the order will be blocked for credit check. This order has to release credit block manually in VKM4. Here ha
-
It seems like something has changed with 10.5.6 or so with respect to the ability to use networked drives. I have a PowerMac G5 that I have been using as a server with an second internal (IDE) drive that I have been using for time machine backups fro
-
HT201263 I get an error code every time I try to restore my iphone 4.
My iphone had some issue and now it only comes on when I plug it into a computer. When I do that the "plug into itunes" symbol comes on the screen. When I attempt to restore the iphone it makes it partially through the restore but always ends with
-
In connection with another question I asked earlier which I've been trying to solve whilst waiting for help, I've found another 2 possibly related problems: I have a symbol, which I animate from 0% scale up to about 110% and then back to 100%. this m
-
Same SSID, different vlans
I currently have a 4402 in place, with my main office building working fine. We are looking at bringing in the wireless at 4 other sites, but we want to use the same SSID. How would I go about assigning different vlans (networks) to the same SSID.