Managing the development within solution manager landscape

Hi
We have a development system (SMD) and a production system (SMP). SMP is the domain controller and manages the change requests of R/3 DEV, QAS and PRD. Now we want to start deploying enhancements to the functionality in the solution manager itself. I created a maintenance project in SMP and activated the change request management. The maintenance cycle is generated showing SMD as the Development track and SMP as the production track. The status is changed to development with release along with the normal activating and unlocking of the tracks. A change request is created in SMP with the component as SMP system. When I try to create a transport request or try log onto the system, the system is raising different types of error messages. Ideally, it should have created transport requests in SMD and should have navigated there for us to perform the required configuration/development. The error messages are System SMD, client 110 not found when trying to log onto the system and when trying to create a new transport request, it raises the exception with below detailed description.
"A technical problem occurred when RFC function module /TMWFLOW/TASK_START was accessed
Message no. SOCM_ACTION_LOG 025
Diagnosis
An exception was triggered when an RFC module was called.
The module is /TMWFLOW/TASK_START
System Response
The system terminated processing. The transaction contains errors.
Procedure
Check RFC connection NONE to the Solution Manager.
Procedure for System Administration
To analyze the termination, you can activate the assertions in the socm_rfc checkpoint group.
Additional Information:
Exception CX_SOCM_RFC_SYSTEM_FAILURE occurred (program:
CL_CHM1_INSTANCE==============CP, include:
CL_CHM1_INSTANCE==============CM00C, line: 140).
There is no RFC destination in the specified target"
Our basis person is also unable to troubleshoot this. Any help will be appreciated. Thanks

Hi Srinivas,
1.Check on the RFCs in SMSY for the SMD and SMP.
2.In the SMSY logical component when you click on the transport route is it showing the proper Transport route as you intented?
3.In the transport route is it client specific?
Please checkon the above and revert back for any clarification.
Thanks and Regards,
Avinash.

Similar Messages

Develop documentation within solution manager

Hi Gurus,
Will anyone can provide a template / sample doc in cataloguing and developing documentation within Solution Manager as defined by the upgrade project.
Mail me at [email protected]
Regards,
PV

Hi Venkatesh,
https://websmp205.sap-ag.de/solutionmanager
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=7D1BCC44746A4C78E10000000A114AB6&class=SOLARGEN
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=161CCC44746A4C78E10000000A114AB6&class=SOLARGEN
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=341CCC44746A4C78E10000000A114AB6&class=SOLARGEN
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=1CCFD544DD2C4B78E10000000A114AB6&class=SOLARGEN
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=BC31CC44E4694D78E10000000A114AB6&class=SOLARGEN
https://cprojects.sap.com/sap(bD1lbiZjPTU1MQ==)/bc/bsp/sap/bpr_internal/doc_window.htm?objid=FC31CC44E4694D78E10000000A114AB6&class=SOLARGEN
http://help.sap.com/saphelp_sm40/helpdata/en/57/92f63aad7e3014e10000000a11402f/content.htm
Hope this will help you, let me know if you need some more details.
Best Regards,
Sachin.

Can't create DataSource in BI engine within Solution Manager.

Hi Experts,
I am doing development in the BI Engine (BI 7.0) within Solution Manager GSB 100 for our client to do Capacity Planning on XI.
I have created all the BI Objects but I could not create Application Components and DataSources from Modeling -> DataSources.
Note: The Source System for BI is Solution Manager, so everything is done within GSB 100 (Solution Manager Development / Test environment).
Can anyone help me with this? Or do I have to go to RSO2 and create a Generic DataSource and then Activate it in RSA5 and Transfer from RSA6?
Your time in this regard is much appreciated.
Cheers,
Chandu

Hi
You should have Authorizations assigned to your Role for Creating Application Component.
Yes, you have to Create the Application Component for DS at RSO2 -- Activate the Same at RSo2 (Hope you know you can see only Standard BC at RSA5) -- Transfer the Same at RSA6..
You can Create the Application Component at InfoSources Area -- RSA12.
Hope it helps and clear
Edited by: Aduri on Jan 29, 2009 10:01 AM

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

How do you create a graph in the blueprint of solution manager?

Hi,
Does anyone know how to create a graph in the blueprint of solution manager?

Is a graphic, i´m gonna to summarize you in a chart what i´m doing ....i hope you understand and can help me....
i sinchroniced Solution Manager with Aris for Netweaver and i want to see the graphics that
were created in ARIS for netweaver in Solution Manager but can not be .
I have been researching and not have to see if the Web service??
Thanks!!!
Edited by: Mariana Lavastida on Aug 14, 2008 2:33 AM

What r the limitations of solution manager

hi
What r the limitations of solution manager
thanks in advance

solution manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385
What is Solution Manager?
Solution manager
/thread/384815 [original link is broken]
Is SAP Project System part of Solution Manager?
Rewards if useful..........
Minal

To extract portal activity data from the portal into Solution manager.

HI all,
I need to extract the portal activity data from the portal into Solution Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal. Waiting for a response.
Thanks and regards,
Divya.

Hi
In solution manager you can do the analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
some manual configuration of the Activity Data Collector.
please follow the attached config guide in the SAP note for configuration.
Jansi

Pool/Crew Management custom development in Work Manager 6.0

Hi All;
I'm new in the Agentry space, please bear with me. I'm working on a development of bringing in a crew/pool management screen into work manager 6.0. So this functionality should work in the such a way that the user clicks on the screen/tab "Pool Management" and within this screen would be a list of employees within a particular work centre. The user would then be able to tick, which employees he/she would be taking out for an inspection. I've been trying to get a feel or sense of direction of how I would go about with this development within Work Manager 6.0, with no success. Please kindly assist in terms of how I would go about with such a development or maybe if there is a resource that I could refer to, to guide me in bringing the employees onto this screen per work centre and enable the user to tick the relevant employees from the list, individually.
I see that Work Manager already has a table "ctPersonResp" which contains all the employees, But I would like to enable the app user to select/filter employees to select from based on different work centres. How would I display all employees in a given work centre? Also how would I bring about a functionality of being able to choose/select/tick individual users within that work centre? I would greatly appreciate any help/direction in terms of getting this development started.
I'm using SMP 2.3 SP03 with Agentry 6.1.4.179 and am using Agentry WPF client as the testing client.
Thanks in advance!
Regards;
Sizo Ndlovu

Hi Jason;
You're right, it is a bit confusing when u're getting started, lets hope I get there soon. I think I have pretty much tried to follow as per your guideline of creating the WorkCentre field and the related indexes. I have also gone to create the screen that gets called within the Pool Management screen tab, but somehow, I am not seeing any selection dropdown when I test on the device. Please see the below screenshots for what I have done and kindly guide me as to where I could be going wrong.
Thanks in advance!
Sizo Ndlovu

Configure incident management for VAR in solution manager 7.0 ehp1

I want to configure incident management for VAR in solution manager 7.0 ehp1, now on service.sap.com all i can find is * SAP Solution Manager 7.1 SP3 VAR Config Guide V1 * under https://websmp204.sap-ag.de/var-partner/.
Can anyone point me to config guides on what needs to be done on the customer end and my end(partner side).
I am trying to fulfill the PCOE requirement below
5. Do you have a fully operational Incident Management System?
Thanks,

hi,
check out the below FAQ and
https://websmp208.sap-ag.de/~sapidb/011000358700000490172009E.HTM
Technical suppport
https://websmp208.sap-ag.de/~sapidb/011000358700000880802009E.PDF
and some more rkt and hw to guides on
https://websmp208.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000089947&
Thanks,
Jansi

Custom development in Solution manager(SolMan)

Hi All.
I need information on possibility of developing custom code in Solution manager(SolMan) environment. Any information on how we can the extract data from different systems and integrate it in Solution manager for reporting using custom code will be helpful.
thanks in advance.

hi,
you can also have a look at my article:
http://www.solutionmanagerexpert.com/article.cfm?session=&id=3513
this may give you some more ideas how solman can be used with XI
Regards,
Michal Krawczyk

View the document in Solution Manager

I am told that there is an option in Solution Manager to have the document generate a link that can be emailed to the approver. This allows the approver to view the document in SM without actually having access to SM. The approver can then reply back to the e-mail with his/her approval after viewing document.
I am new the SM any detailed input with how to steps would really help..
thanks in advance.

Hi B_J,
it is correct, each document has attributes, on the attribute tab in the button bar, there is an icon to generate an url for the selected document. This link is stored in your windows clipboard, so you can past this link in an e-mail or wordfile. The person who gets the e-mail must have access to the Solution Manager via network, he needs no personal user in the system. The link used a service of Solution Manager(check in the Solution Manager IMG at the HTTP services). This service requires a user to read the document. If you have no user, then it is necessary that in the system a default user is assigned to the service or to its alias. Now to your second use case, the approval, you can not bring any information INTO Solution Manager, you can only answer the e-mail, with the info, yes the document is OK, but you can not set a status or an other attribute at the document, that the document is approved.
Regards,
uDo

Urgent need for the creation of solution manager key please

Hello
Can i please ask you to create a solution manager key for me ?
i am stuck in my test installation of ECC6.
Here are my details :
       Instance name : sapdb1
       Instance number : 01
       Computer name : ap-hp1
Kind regards
Christophe

Hi Chris,
I understand the urgency. There are only two ways you can get a solution manager key. One by yourself. Otherwise, please create a message with SAP requesting a solution manager key temproarily. Unfortunately, even though we can create a solution manager key, it is not advisable to distribute the key in forums.
Hope this helps.
Thank you.

How can I change the language of Solution Manager

Hello experts, I installed the english version of solution manager, but I need to change the menu language and everything inside my solution manager to spanish, theres a guide of how to do it?
Thanks,
Paul

palexhur wrote:
Thanks to everyone for the answers, I accept that I need to go deeper into this, but I followed the steps that Rupali gave me, and something strange is happenning, my main menu on top of the SAP Solman is in English, the Service Desk transactions gave me an English Menu too, but others transactions gave me Spanish Menues and words.
>
> My priority is having my Service Desk transactions with Spanish menues.
>
> Thanks for further help,
> Paul
Hello,
First you need to 'install' the language, only then you can activate/use it.
If you have just followed the process mentioned by Rupali, then that process is just for activation/using. There are a number of things you need to perform apart from those steps.
Documentation is necessary, please read the Notes carefully.
Thanks

How to handling the SLA in Solution Manager

Hi Experts,
I am Workfiow consultant. Presently working on solution manager SLA .Timings for SLA is already maintained in CRMD_SERV_SLA for response and resolution times based on priority. Now the requirement is to notify the users when the SLA is breached and SLA clock should be stopped for some of the statuses like SEND TO SAP , Customer Action Etc.
But by coding / workflow it seems be difficult to handle the this requirement. So is there any configuration apart from CRMD_SERV_SLA that can notify the users when the SLA breached and for stopping the SLA clock on specified status.
Any good document on Solution manager SLA configuration is appreciated. I searched in SDN but images in links not displaying properly.
Waiting for the valuable suggestion.
Thanks,
Ramu

Hi Ramu,
Please refer SLA Configuration in Solution Manager .
regards,
Nibu Antony

The URL in Solution Manager for SRM Standard Configuration

Hi Experts,
We all know that after SRM 5.0, all standard configuration guid are presented as URL in SAP Solution Manager like below:
http://help.sap.com/SCENARIOS_BUS2005/helpdata/EN/ac/136341acd3001de10000000a155106/frameset.htm
My question is: is there any other way to find these configuration url? If I don't have solution manager enviroment, how can I find these urls? Many thanks.

Hi Dinesh,
Thank you for your reply. I checked this site before(maybe one year ago). At that time, there was no configuration guide for 5.0. Now it's great...
My question is there any place contained those urls in solution manager. I can't find those urls in any configuration guide. SAP make such a configuration online help, why it doesn't open for those peopel who don't use solution manager. It confused me...
Anyway, thank you very much for your reply.

Managing the development within solution manager landscape

Similar Messages

Maybe you are looking for