Manually trigger Scope

Good Day,
I have a USB-5133 USB scope and I am using an EdgeTrigger like this in C#
NIScope scopeSession = new NIScope(ResourceName, IdQuery, ResetDevice);
double triggerLevel = 0.5;
ScopeTriggerSlope triggerSlope = ScopeTriggerSlope.Positive;
ScopeTriggerCoupling triggerCoupling = ScopeTriggerCoupling.DC;
ScopeTriggerSource triggerSource = ScopeTriggerSource.Channel0;
PrecisionTimeSpan triggerHoldoff = PrecisionTimeSpan.Zero;
PrecisionTimeSpan triggerDelay = PrecisionTimeSpan.Zero;
ScopeSession.Trigger.EdgeTrigger.Configure(triggerSource, triggerLevel, triggerSlope, triggerCoupling, triggerHoldoff, triggerDelay);
I am then fetching the waveform like
AnalogWaveformCollection<double> waveforms = scopeSession.Channels[ScopeTriggerSource.Channel0].Measurement.FetchDouble(Timeout, actualRecordLength, waveforms, out waveformInfo);
This method, FetchDouble blocks the scope while it waits for voltage to trigger. I would like to be able to stop the scope from waiting for something to trigger it. Is it possible to manually trigger the scope or is there a way to stop the scope from waiting?
Regards,
Jonathan.

jonfrankel001 wrote:
Hi nyc,
Thanks for the reply. I have searched the internet and looked through the documentation but I cannot find the answer to my question.
I looked at that link but I am not having trouble configuring my trigger, it is working correctly. However, I would like to be able to cancel any waiting triggers on my scope. Do you know how to do that?
Regards.
Waiting trigger?
I don't have experience with this particularly scope, but other scopes, when you change the triggering, the effect is immediate.

Similar Messages

** Is it possible manual trigger when JDBC is sender

Hi Friends,
Is it possible manual trigger to send the new records to the JDBC sender adpter ? Instead of Stored Procedure or SQL statement (Stored Procedure) in 'Query SQL Statement' parameter ?
The purpose is instead of JDBC poll at frequent interval,we want to send newly inserted record whenever required.
Any idea friends, to do this ?
Kind Regards,
Jeg P.

Hi,
You can try this way. On insertion of any record in a table trigger a Stored Procedure which will call the url for activating and deactivating the channel. For more help on invoking the url from Stored procedure, please refer to the link below.
http://www.lorentzcenter.nl/awcourse/oracle/appdev.920/a96612/u_http.htm#1012294
Your code will look something like this
req := utl_http.begin_request('http://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=action ');
Thanks
Amit

Manually trigger PO Creation for a SC

Hi Experts,
Due to downtime issue one SC is created but the PO creation did not take place. The SC is stuck in I1111 " Item in Transfer Process" but the PO never got created. Is there anyway I can trigger the PO creation manually. The system is SRM 7 in Ext. Classic Scenario.
Thanks

Hello,
Check note 1480994. It provides some inputs.
Regards,
Ricardo

Manually trigger Availability Check in the Sales Order User Exit MV45AFZZ

Hi All,
As per the normal scenario where sales orders are created and the schedule line delivery dates are determined.
Based on some business logic for few customers we need to change the delivery priority and confirmation delivery date.
We are implementing this logic in the user exit MV45AFZZ in the routine USER_EXIT_SAVE_DOCUMENT_PREPARE.
The availability check logic is already implemented by then. Now we have scenarios where the date redetermined by the custom logic is greater than the one determined by the standard availability check done by SAP.
We have changed the values of the field VBEP-EDATU as per our logic but we still have 2 lines in the schedule line data where the requested date is greater than the confirmed date.
This can be tackled if we can redo the Availability Check.
Can someone provide pointers on how can we trigger the availability check manually in the code.
Regards,
Karthik

What was the solution?

To manual trigger output

How can i manuallly trigger an output via VA02 so that SAP will ignore credit limit block and transanction would continue
Thanks

In VA02 you can go to Extras- Output (Header) and then add the relevant output by selecting from the drop down or typing it directly. and you can choose which ever medium you need, provided the medium is maintained in the output condition type definition. If you want to print, then you select the output that you added and go to "communication" and then add the printer.
Looks like if there is a credit block on your order, then the output is not being generated. This is based on the requirement that you assigned to your output in the outpit procedure. If you want to avoid it, you check the routine and then try to use a different one or get the routine changed, so that the credit limit block will not affect the output. T Code NACE to check the output type definition and the output proedure.
You mentioned that the credit check should be bypassed and then be able to process the order. By adding the output type manually , you cannot bypass the credit check.
Hope this information is helpful to you.
Regards
Sai

Manually trigger chartItem event

Hello,
I want to trigger manually an event (suppose a ChartItemEvent.ITEM_MOUSE_MOVE would be best). My intention is to show a datatip for a point on a line series independently of the mouse's y-position. So I catch the general mouse move event from the diagramm and trigger the item event of the line chart, like this:
private function mouseChartHandler(event:MouseEvent):void {
    var sensitiveRegion:Rectangle = new Rectangle( event.stageX-5, 0, 10, this.document.height);
    var hitItems:Array = new Array();
    for each ( var chartItem:ChartItem in lineChart.getItemsInRegion( sensitiveRegion ) ) {
        if ( chartItem.element.name == "seriesMean" ) {
           var item:LineSeriesItem = chartItem as LineSeriesItem;
           var hitItem:HitData = new HitData( new Date().getMilliseconds()*Math.random(), 1, item.x, item.y, chartItem);
           hitItems.push( hitItem );
    var itemEvent:ChartItemEvent = new ChartItemEvent(ChartItemEvent.ITEM_MOUSE_MOVE, hitItems, event, this.lineChart);
    lineChart.dispatchEvent( itemEvent );
But nothing seems to happen. Anyone an idea?

I answered the question under: http://reality-and-a-half.multiversum.com/werkzeuge/flex-show-chart-datatips-if-mouse-is-a nywhere-on-the-chart

How to check for space in manual trigger Search Mask(True/False) Propertie?

I would like to trigger an section called section1 coded within the from frm1, when at least one record of a transaction has a value of FRM at offset 1 and spaces in position 358?
I am trying to specify as below:
1,FRM,358()
is the above syntax correct?
Even though, ' ' appears in extract file for record at offset 358 and with FRM in position 1, the section1 is not triggrered. I have verified in the NA file?
Please note that FRM can be a repeating record.
Thanks,
Bala

Hi Bala,
The correct trigger would be:
"1,FRM,358, "
Please note the space at the end of the trigger.
Gaétan

Manually trigger the "validation failed" rendering mode

Hi,
I am converting a forms application to APEX. The forms application has many before insert triggers with raise_application_error instructions. These triggers are used for validation purpose. Obviously there are modifications needed as I want to display the application error messages in the notification box instead of the APEX error page.
The most efficient way is obviously to reproduce the trigger logic in APEX validations. However I am curious to know if there would be a way to replace the raise_application_error instructions in triggers with something that could stop and rollback all the processing and then re-render the page like when a validation fails.
I played with wwv_flow variables but I didn't find anything that would trigger this. Is it possible to call the same thing that APEX uses to re-render the page with notification message when it detects that one or more validations have failed?
Thanks.

Hi ,
I am not sure if this would work, but you can give it a try. In the exception area try to display message using the
apex_application.g_print_success_message := apex_application.g_print_success_message|| 'My custom text' ;
Thanks,
Manish

Email download for sub folders needs manual trigger

If there are sub-folders in inbox of any mail account, emails in those folders are not downloaded automatically when they get pushed. It needs trigger like opening the folder and swipe down to check for updates.
Is there any way to make mail app to download those emails automatically as and when they are pushed?
- Prashant Bhat

Hi,
According to your description, you need a email notification for sub-folder.
And you can try the following workaround:
Add the condition “display a Desktop Alert” in the Outlook rule which you have apply to the sub-folder.
If you have any question, please feel free to let me know.
Thanks,
Angela
Angela Shi
TechNet Community Support

Manually trigger the responsive resize method

I am building slide type webpage, and each slide is set to display: none, and removed from view until the viewer hits the button to slide to the next or previous slide. Edge compositions set there do play, but they do no resize accordingly when the viewer slides over. Does the Edge JavaScript API allow for us to externally trigger the resizing of Edge compositions?

Hemanth Kumar,
Thanks for the reply! I went and tested what you suggested, but unfortunately nothing actually happens to resizing the Edge composition — unless I physically resize the browser window with my mouse. Triggering it via JavaScript does not resize the composition.
To explain a bit more about the issue: The Edge composition does this weird behavior only when, the composition is loaded, I move to the next slide (the previous slide with the active Edge composition) is set to display: none. Now, on the new slide, I resize the browser window, and then move back to the previous slide (now set to display: block). This results in the Edge composition being scaled very small, until I resize the browser with my mouse then it rescales back to full size (fit its parent container).
Any suggestions or thoughts? Thanks.

UC560 - AutoAttendant & Manual Trigger?

Good morning all,
I've got the admin portion down, but I'm still learning the various configs, so any help is greatly appreciated! We have an auto-attendant working with a business hours schedule. Works like a charm. In case of closing early, winter storm, etc. the company wants to have a key input (similiar to Night Service) that turns on (and off) the AA. Is that possible? From what I've been able to work with in the CCA, the only thing I can possibly think of is having a Night Service which sends to a floating extension until the AA schedule kicks in. The secondary question would be, will an AA schedule take priority onto the main line set to Night Service?
Thanks for the help!

Hello Raymond,
You may use the following example to achieve this:
Main DID -> floating extention -> AA
Then in night service add this floating extension which should point to another AA or phone number which should be used for the case. You need the floating extension because you cannot select the AA number in the night service mode window. Add also one of the other real phones for night service bell - this is needed because you must use this phone to force night service mode on/off. Then add a code under night service e.g. *222.
This way when user on the phone selected for night service may switch to another AA or external number.
HTH,
Alex

Creative Cloud Subscription - Application & AAM Updates - What's manual & What's not?

This may seem a silly question, but I'm finding updating apps more complex now that I have Creative Cloud membership -- or at least it seems more complex.
Questions
The question is, what updates come through AAM and what updates must I go to adobe.com, download, and install outside of AAM?
It seems that if I install outside AAM, AAM could be lost in a state of not knowning what Creative Cloud apps I install (getting out of sync showing "Install" when something already is "Installed").
Then there are security updates (like the current certificate issue for Windows users) -- are these handled by updates coming through AAM or do I go to the website, download, and install.
And what about AAM itself? Do I manually (go to adobe.com, download, then install) install updates for it? Or does it automatically udpate?
Add to this a perceived need to "uninstall" apps before updating (or maybe that's not necessary??) and its quite unclear what "I" take care of updating and what "AAM" automatically updates.
AAM Feature Suggestions
It may be helpful to consider a couple features for AAM that might help clarify things.
Add the version # of each "Installed" item to the list of applications.
Add an "update" link (button) to the right of each "Installed" item if a newer version exists. The link would manually trigger updates for those apps that don't do an "automatic" AAM update by taking you through the proper paths to keep AAM in sync with what's installed (assuming here we're talking only of Creative Cloud apps).
These last features are possible solutions for quirks I've noted so far...
Give users the opportunity to set the install path before the first install
When you first install AAM, it doesn't allow you to set the desired install path for the very first install. Which means that first application is always going to install in the default location. You can only set the preference after that first app.
So in order to put that app where you want it you'll need to uninstall it then reinstall it (I think?), when it could have been installed in your desired location if you had a chance to set that before that first install.
Remember the install path preference
The AAM also seems to "forget" the desired path. When you go to AAM sometime after having installed apps, it seems to lose that preference -- the value in the dropdown is empty. So, each time I enter it again -- just in case I want to install another app.
Overall I like the products in the Cloud. But need some clarity so I can avoid update pitfalls.
Thanks to anyone who can shed some light on the updating processes!
-Bonnie

Bonnie thank you for the feedback. Feel free to also document your feedback at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.
As for your initial question I would recommend you choose Help>Updates from one of your point product installations. This will trigger the update portion of the Adobe Application Manager which will not only update AAM but also any applicable updates to your software.

How to re-trigger BA00 after sales order has been rescheduled

Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I　ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!

Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.

How to manually eject a CD on my 24" iMac.

Dear guys,
Can anyone help to answer my question on how to manually eject a cd on my 24" imac. I inserted the Window XP Pro SP3 into my imac. Its started to run the os now cannot boot the system. Actually can anyone help to advise how to go about do the boot camp process. Great thanks.
Please help....

If the mouse routine does not work. on some Macs, there is a little manual trigger in the extreme top of the disc slot. Carefully trip it with something like a straightened paperclip. It is just a fraction of an inch inside.
Your post is a bit cryptic. Did you actually follow the BootCamp process or just insert this Windows disc?
There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

Message trigger after Purchase Order Change

Hello all,
I have a requirement whereby system should trigger output message ater PO change. I have maintained message type for the PO using MN04.
However still I am not able to get message tirggered afer change. System is triggering ourput message after creation only.
Kindly advice places where I can look into. .
Thanks in advance.
regards,
Parshuram
Edited by: parshuram manjrekar on Nov 27, 2009 4:05 PM

Hello Guys,
I have created new message type which should get triggered after PO document creation/change.
I have assigned this message type to PO type using MN04. I have removed all other message types assigned to this order type.
However when document is PO created is created, I am not able to see any output assigned to PO.
When I go in change mode, and try to manually trigger new output message type, system is not showing me new message type but showing all old message types as possible entries.
Have I missed any config.
regards,
Parshuram

Manually trigger Scope

Similar Messages

Maybe you are looking for