Mapping error for EDI 823 from XI to R/3

Hi All,
We are receiving an EDI 823 from XI to R/3 and the XML file looks like this as below.
Partner No: YRDCLNT110
Partn Type: LS
Sender Information
Port: SAPYXD
Partner No: EXTD_BALE
Partn Type: LS
Whereas there exists no partner no. in R/3 by the name EXTD_BALE. The interesting part is EXTD_BALE is a IDoc Adapter Port No in XI.
Please provide inputs on these.
Regards,
Karthik

Hi Karthik,
     Have u configure a R/3 port in IDX1 of XI. This port has the RFC destination pointing to R/3. It will be used by XI to get into R/3.
Regards,
Akshay

Similar Messages

  • Mapping Issue for EDI 823 from XI to R/3

    Hi All,
    We are receiving an EDI 823 from XI to R/3 and the XML file looks like this as below.
    - <FINSTA01>
    - <IDOC BEGIN="1">
    - <EDI_DC40 SEGMENT="1">
      <MANDT>110</MANDT>
      <DOCNUM>0000000000000000</DOCNUM>
      <DIRECT>1</DIRECT>
      <IDOCTYP>FINSTA01</IDOCTYP>
      <MESTYP>LOCKBX</MESTYP>
      <STD>X</STD>
      <STDVRS>003040</STDVRS>
      <STDMES>823</STDMES>
      <SNDPOR>EXTD_BALE</SNDPOR>
      <SNDPRT>B</SNDPRT>
      <SNDPRN>1000000015</SNDPRN>
      <SNDSAD>1000000015</SNDSAD>
      <RCVPOR>SAPYRD</RCVPOR>
      <RCVPRT>LS</RCVPRT>
      <RCVPRN>YRDCLNT110</RCVPRN>
      </EDI_DC40>
    Now the problem is the incoming IDOC ends up with errors.
    Recipient Information
    Port : <empty>
    Partner No: YRDCLNT110
    Partn Type: LS
    Sender Information
    Port: SAPYXD
    Partner No: EXTD_BALE
    Partn Type: LS
    Whereas there exists no partner no. in R/3 by the name EXTD_BALE. The interesting part is EXTD_BALE is a IDoc Adapter Port No in XI.
    Please provide inputs on these.
    Regards,
    Karthik

    Hi, any feedback in this one ?

  • Idoc error mapping error for segment "E1EDT13 006" in DESADV idoc

    Hi SAP Gurus,
    DESADV IDOC for few articles is not getting passed from SAP to legacy system. It is missing one segment"E1EDT13 006" for goods issue.
    Why is this mapping error happening. How can this be resolved.
    Regards.
    Sumi

    Hi Nsangle/SAP gurus,
    Thanks for  that. But, I have already compared the failing idoc with the successful one. It's the segment E1EDT13 006 missing in the wrong idoc. I have already added that idoc and reprocessed it.
    But, I wanted to know why such kind of idoc segment missing/ mapping error happens.
    Regards.
    Sumi

  • Mapping error for file scenario.

    Hi ,
    I am working with the help of this scenario to pick only selected files.
    /people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
    I am getting error in mapping . Everything i have checked its correct . Mapping is correct . but still its giving error . how can i solve it .
    Error : RuntimeException in Message-Mapping transformatio~
    Thanks ,
    Syed.

    Dear Syed Kumar
    Based on the blog you are executing the scenario I guess. The scenario is clearly focusing on the picking up the files using the mask attribute in File Access Parameters.
    As you mentioned clearly, that you are getting mapping error plz concentrate on how to rectify the mapping errors.
    will guide to do so.
    1. Go to SXMB_MONI and in the integration server and check for the message you are trying send.( I hope you did this)
    2. As it is giving you mapping error, Double click onthe message Flag showing red.
    3.Plz check the Payload XML content copy that content and paste in the message mapping Test section of IR.
    4. Execute the Test. If you get the message at the receiver side there shouldn't be any error.
    If you still get the error let me know.
    Best of Luck
    Reward Points If found use ful.
    Edited by: Praveen Kurni on Jun 13, 2008 7:43 AM
    Do the Interface mapping test as well if you are successful in message mapping.

  • Mapping error for MessageSplit

    Hello,
                I am getting mapping error when i tried the scenario MessageSplit using BPM.Could somebody guide me in this context
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure i have followed this blog, but during mapping i have created mapping using createIF node functions when i test the mapping i am getting the below error as cannot produce target element check the source xml instance, i am newbie to this world.
    Rajesh

    Hi,
    Check the transformation step again and check this thread An empty container element
    Also try to post one question per thread. Close the thread once you get the reply for the original one.
    Thanks!

  • Gettin a MAPI error when sending emails from another program

    Using Thunderbird, I used to ne able to send emails from MYOB.
    Since an update of Thunderbird on one particular machine, it no longer works. It comes up with a MAPI error. All the other computers in the network send from MYOB with no problem.
    Could someone please assist as the computer that wont send is the invoicing computer!

    Do I assume the windows XP the forum detected is or is not the operating system.
    What operating system, 32 or 64 bit?

  • Javascript error for Inserting Pages from a source

    Below is a script I wrote that isn't functioning properly on my large 200 page document that I need it to. Granted there might be a much easier way to script this, but I'm no expert. I have a 200 page document that needs to be 600 pages, basically every page needs to be copied twice (and obviously placed right after the original. So I have the original PDF, then I copied that PDF to use as a source document to copy from. (To clarify if I'm not being clear, the first 3 pages would be page 1, 2, 3,... it needs to be: 1,1,1,2,2,2,3,3,3 etc)
    var targetpage = 0;
    var sourcepage = 0;
    while(sourcepage < 199)
        this.insertPages({
            nPage: targetpage,
            cPath: "source.pdf",
            nStart: sourcepage,
            nEnd: sourcepage
        targetpage++;
        this.insertPages({
            nPage: targetpage,
            cPath: "source.pdf",
            nStart: sourcepage,
            nEnd: sourcepage
        sourcepage++;
        targetpage=targetpage+2;
    It gives me an error that I have no idea means, nor how to correct after only placing a total of 3 pages - so the doc went from 200 to 203 (2 of page 1 as intended, then 1 page of page 2, then for some reason it stops...
    InvalidArgsError: Invalid arguments.
    Doc.insertPages:9:Batch undefined:Exec
    Why is it stopping? And please don't assume I know what I'm doing Thank you.

    Have you read the Acrobat JS API Reference about the insertPages and the path value and restrictions?
    insertPages now needs to use the "privileged context" when not being run as a console or batch event.
    Safe path
    Acrobat 6.0 introduced the concept of a safe path for JavaScript methods that write data to the local hard drive based on a path passed to it by one of its parameters.
    A path cannot point to a system critical folder, for example a root, windows or system directory. A path is also subject to other unspecified tests.
    For many methods, the file name must have an extension appropriate to the type of data that is to be saved. Some methods may have a no-overwrite restriction. These additional restrictions are noted in the documentation.
    Generally, when a path is judged to be not safe, a NotAllowedError exception is thrown (see Error object) and the method fails.

  • MAPPING ERROR FOR CND_M_SUP - Split of VAKEY fields failed

    Hi,
    in CRM our customers request some controls for products that they enter in trade promotion(CRM_MKTPL) These are related to "Listing & Exclusion" of R3 system. So we need to download R3 tables into CRM that are related to "Listing & Exclusion" from R3. We have a table named KOTG804 (Customer/Material) in R3. And in CRM we create a table named CUS804 in the Listing header with the key fields like KOTG804. Then we create download object DNL_COND_G804. And start the initial load for this object. But we have promblems. The errors in SMW01 are like that :
    - Records of table CUS804, usage LI cannot be exchanged
    - Split of VAKEY fields failed (Block 1; Appl. LI; Use CRM)
    - Error when carrying out initial download
    How can we solve this problem and take the KOTG804 records from R3 to CRM?
    Thanks.

    Hello
       Did you find out what the problem here was? I am facing the same situation. Could you help?
    Reagrds,
    Sowmiya

  • End of file / parsing error for EDI document

    I have an issue where a Trading partner is sending extra non readable characters after the last segment terminator in a X12 EDI document. I know there is a property to strip the CR/LF characters and that does not help me.
    Do I have any other options for preprocessing in B2B ?

    Hi,
    Try using the property oracle.tip.adapter.b2b.edi.enablePreprocess=true in the tip.properties file.
    ALso could you please let me know the property which removes CRF/LF characters from the input file to B2B.
    Thanks for your help.
    Regards,
    Dibya

  • Mapping  error for larger messages

    HI,
    My senario is File to File with some conditions ( Conditions are written in UDF )
    When i am executing the payload with small size mapping executes correctly .
    But when i am executing with larger payload Mapping executes but not taking any conditions in UDF , It executes as one-one mapping.
    thanks in advance

    HI
    This should not be the case... if your UDF is working fine for smaller payload then it should work for larger payload also..
    - test mapping by using payload and after that in mapping use display queue wherever you have used UDF and try to to see what is input and what is the output.. and this will give you clear idea about what exactly is going on..
    - I guess something wrong with logic which you have used in UDF or is input payload dependent, so try to use display queue to get clear idea about UDF working.,.
    Thanks,
    Bhupesh

  • SOS!!!!----Error for Loading data from Oracle 11g to Essbase using ODI

    Hi all.
    I want to load data from oracle database to essbase using ODI.
    I configure successfully the physical and logical Hyperion essbase on Topology Manager, and got the ESSBASE structure of BASIC app DEMO.
    The problem is.
    1. When I try view data right click on the essbase table,
    va.sql.SQLException: Driver must be specified
         at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
         at com.sunopsis.graphical.frame.b.jc.bE(jc.java)
         at com.sunopsis.graphical.frame.bo.bA(bo.java)
         at com.sunopsis.graphical.frame.b.ja.dl(ja.java)
         at com.sunopsis.graphical.frame.b.ja.<init>(ja.java)
         at com.sunopsis.graphical.frame.b.jc.<init>(jc.java)
    I got answer from Oracle Supporter It's ok, just omit it. Then the second problem appear.
    2. I create an interface between oracle database and essbase, click the option "staging area deffirent from target"(meaning the staging is created at oracle database), and using IKM SQL to Hyperion Essbase(metadata), execute this interface
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 61, in ?
    com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
         at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
         at org.python.core.PyMethod.__call__(PyMethod.java)
         at org.python.core.PyObject.__call__(PyObject.java)
         at org.python.core.PyInstance.invoke(PyInstance.java)
         at org.python.pycode._pyx1.f$0(<string>:61)
         at org.python.pycode._pyx1.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java)
         at org.python.core.PyCode.call(PyCode.java)
         at org.python.core.Py.runCode(Py.java)
         at org.python.core.Py.exec(Py.java)
    I'm very confused by it. Anybody give me a solution or related docs.
    Ethan.

    Hi ethan.....
    U always need a driver to be present inside ur <ODI installation directory>\drivers folder.....for both the target and the source......Because ojdbc14.jar is the driver for oracle already present inside the drivers folder ....we don't have to do anything for it.....But for Essbase ...you need a driver......If u haven't already done this.....try this.....
    Hope it helps...
    Regards
    Susane

  • HT203433 download error for purchased songs from itunes how do i fix this

    Purchased songs from iTunes and some of them won't download, it says "download error, try again".  Has anyone else had this problem and what do I do to fix it?
    Thanks

    If they work on your PC, then unsync them from the phone and resync.
    If they do not work on your PC, redownload from Past Purchases, then unsync from phone and resync

  • Error for run app from workspace

    Hi
    i have installed workspace 2.1 now when i want to open app this error appear ( attached)
    what is problem?

    This means that the Firefox thinapp package is not available to the Windows client machine. We will need logs from your Windows client machine to know why. This is how you can collect your logs. Open the Workspace app in your Windows System Tray. Click on Options. Click on Collect diagnostic information. It will generate a zip file and put it on your desktop. Send us that zip file.

  • MAP value for sub materials from New(Main) Material

    Hi all
    I got an issue in Kit breaking i.e. i got one material(main) which contains 10 of sub materials.Now when i am receiving the main material, i will receive with a value  assume as 10000 bugs.
    Now i would like to know that the 10000 bugs can be splited equally between all the 10 materials automatically.
    All the 10 material  are newly created with MAP value as zero.
    Regards
    Praveen

    As mentioned in my earlier reply, if material is maintained on price control 'V', then system tries to settle the variance to inventory. In such case, if the variance is favourable i.e. Actual cost is less than the standard cost, the negative variance will reduce the value of inventory and as a result MAP. If the inventory value is less than the amount of variance, system issues a message that MAP will become negative.
    Hope this clear the issue. If yes, please award points
    Regards
    Rakesh Pawaskar
    Message was edited by:
            Rakesh Pawaskar

  • Error for visual ADF from xml code behind

    Hello all:
    I am a freshman to use Jdeveloper 10.1.3.1.
    When I was using faces-config.xml to create JSP and JSPX page, the ADF component control suddenly diplayed abnormally, Only to show the tagbox like form, html, head, body and so on in Design view, sometimes even nothing to display,.But when I restart jdeveloper, some page would be OK again, others still can not be show normally. I checked the code behind the page.there is nothing wrong, because these codes are all auto-created.
    Thanks to advance
    Bonnie([email protected])

    I have solved this problem.
    Because I added a filter into web.xml. It seemed that this would be complied while in design model. After I removed it, it's OK!

Maybe you are looking for