Mass Maintainence of Trasnportation Lane custom field
Hi All,
I want to maintain custom fields added in /SAPAPO/TRM table. Can anybody tell me how to achieve this via MASSD Tcode?
Thanks
Siddarth
Hi Siddarth,
You can use report /SAPAPO/TR_TRPROD_MASSMAINT as a template to build your own one.
It should help. Best regards/Tiemin
Similar Messages
-
Custom fields not getting updated in Mass Maintenance-MM17
Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
GeetaI had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work
-
Mass update of a custom field at Product Revenue level
We are trying to update a custom field at Product Revenue level using the Opportunity Web Service. The webservice call is timing out as we have thousands of Opportunities.
I would appreciate if anybody gives input on how we can massively update a custom field using Opportunity Web Service.
OR
Is there a way to mass update a custom field at Product Revenue level other than using a web service.
Thanks for your help!
-purnaIf you are not very much obsessed with Webservices, the other workaround is the Data Loader Tool. It was discussed earlier in this forum.
Pl refer-
Re: Product Revebue Updation
Hope this helps.
Rgds,
Amit Sahu -
Mass maintenance and BDC Recodring of custom fields added in PO header.
Hello Experts,
I have created a custom fields in PO header and used Structure for BADI implementation to update the header with values enterd in custom table.
My requirement is for some selected PO i want to fix the value of one of my custom field at header level.
I have tried both the options Mass maintenance and BDC recording but the issue i'm facing is when i go for mass maintenance it is giving me the ERROR and it seems that we can only do the mass maintenance for sap-standard fields only.
When i go for BDC recording i'm facing the issue that when i do SHDB and start recording for ME22N my custom field is coming grayed out and i'm not able to input the desired value in custom field and complete my recording.
Let me know your valuable inputs .
Thanks,
NaveenHello,
Instead of BDC i'm doing it through the BAPI "BAPI_PO_CHANGE" by populating the structure extensionin but here i'm facing the error as below:-
W ME 887 Error transferring ExtensionIn data for enhancement CI_EKKODB
E BAPI 003 Instance 4500001544 of object type PurchaseOrder could not be changed
below is my code:-
ls_extensionin-structure = 'BAPI_TE_MEPOHEADER'.
ls_extensionin-valuepart1+0(10) = wa_po-ebeln.
ls_extensionin-valuepart1+14(3) = no.
append ls_extensionin to lt_extensionin.
clear:ls_bapi_te_bg,ls_extensionin.
ls_extensionin-structure = 'BAPI_TE_MEPOHEADERX'.
ls_extensionin-valuepart1+0(10) = wa_po-ebeln.
ls_extensionin-valuepart1+10(1) = 'X'.
append ls_extensionin to lt_extensionin.
clear:ls_bapi_te_bg,ls_extensionin.
call function 'BAPI_PO_CHANGE'
exporting
purchaseorder = wa_po-ebeln
tables
return = it_bapireturn
extensionin = lt_extensionin
if it_bapireturn[] is initial.
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = ' '
importing
return = it_bapireturn.
endif.
refresh lt_extensionin[].
endloop.
Please let me know if there is any way to achieve this.
Thanks,
naveen -
Custom Field is not updating using MM17 ( Mass Material Maintenance )
Dear All,
I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do? Please suggest...
Regards
Pradip PawarHi,
Follow the below procedure,
1. In table MARC custom fields need to be add using append structure. For that need to create data elements & domain for corrosponding fields.
2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.
3.Now in to the layout of Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
Imp Note - Refer SAP Note no. 44410.
Regards,
Pradip Pawar -
Mass Maintenence For custome fields from MM17
Hi all,
I Have added some custome fields in to material master and it is working fine,When i am trying to cahnge the values for these custome fields in MM17 it is not getting reflected in material master.
After cahnging the values if i save,it is giving me an Information-1090 : Messages have been issued: number MASS000924000003
In long text of this information i have.
Diagnosis-During inbound processing for the IDoc, messages have arisen while checking material data.
System Response-The system has filed these messages in the form of an application log with the number MASS000924000003.
Can you please let me know,How to solve this.
Thanks & Regards,
Anjana RaoFirst read OSS [Note 576160 - MM17: BAdI implementation for append fields|https://service.sap.com/sap/support/notes/576160] and of course (and before) [Note 44410 - Integrating cust.-specific fields in matl master|https://service.sap.com/sap/support/notes/44410]
Regards,
Raymond -
Mass Maintenance will recognize any customer record in workflow process
Hi gurus,
Please help me on the Workflow process, how to handle below workflow scenario, is there any logic be hand this.
please see in BOLD workflow issue.
1.2 As-Is Business Process
Currently Data Maintenance teams use standard SAP transaction XD07 to change Customer Account Groups. The standard transaction XD07 allows only one Customer Account Group to be changed at a time. The process is to be manually repeated for every customer. After the Account Group is changes in the request client (X07(10)), an RFC call is made to the BOR client (X07(20)) and then to the transaction client (X08(10)) to change the Customer Account Group as the SAP ALE process does not support Account Group Changesu2026
1.3 To-Be Business Process
From time to time, bulk customer data updates will be needed. This can be the result of business situations that cause multiple updates to be performed for given customer fields such as Customer Account Group field. A new program must be developed to let the user mass update the Customer Account Group field (KNA1-KTOKD). The Program should be accessed on demand using a new T.Code (YMDM_ACCTGRP_CHG).
Business users will submit a spreadsheet in the appropriate upload format to CDM along with written approval from the Food Service data owner to execute the upload in P07. CDM will execute the upload, record all documentation for the audit change log and notify the submitter when complete
1.4 To-Be Business Process Flow Diagram
1.5 Enhancement Functionality
The following are the requirements:
u2022 This tool will enable a user to perform bulk update to the customer account group field.
u2022 The utility should let the user upload a u201CTab delimitedu201D file to mass update the Account Group field.
u2022 The Load File will have 3 columns, Customer Number (KNA1-KUNNR), Current Account Group (KNA1-KTOKD) and New Account Group (KNA1-KTOKD).
u2022 The Program must utilize the process behind the standard SAP transaction XD07 to change customer Account Groups in X07(10).
u2022 The standard customer ALE (DEBMAS) process does not support Customer Account Group changes, so the mass change program must use the RFC functionality to change he Account Groups in the BOR (X07(20)) and Transaction system (X08(10)).
u2022 Workflows for all updates performed using this T.Code are automatically approved. No manual approval steps will be needed after data load.
u2022 Mass Maintenance will recognize any customer record that has an open workflow. If a customer record is already in the request queue, it is u201Coff limitsu201D for any bulk update. That update request to that particular customer record must be rejected.
u2022 Provide the option to run the process in validation mode and update mode.
u2022 Report all hard and soft legacy field errors on a validation report. All u201Chardu201D legacy field validations should be passed before allowing update mode to run.
u2022 The upload process will produce an error log for all records not loaded into the system.see newer message. Problem appears to be related to gmail
-
Batch input with customer fields
I have to create a batch input process that post documents through FB01L.
As the lines of each document have been added customer fields, when I tried to go from one line of the document to the following one, a screen appears when I have to introduce some data (two of the fields are mandatory). I had solved these issue by ending with a "Call Transaction" with option "No batch input" = 'X'. This way, these customer fields appear directly in the screen, and not in a popup screen, so the batch input process was very easy.
But, I have been told that I don't have to use "Call transacion", I have to create a session, and the user will post the document by launching it in SM35. This way, even adding "No batch input" = 'X' in the options of "BDC_INSERT", the popup screen appears when running the session.
So, is there any way of running the session in SM35 with the option "No batch input"? If it's not possible, which is the best option of dealing with these popup screens? I have been able to go from one dynpro to another, and to open that popup screen, but I can't fill the mandatory fields.
I hope you understand my problem, please excuse my English.Hi ,
Go to the T code Mass , put the object as KNA1 for customers .
Execute the same and you will find all the option available for making mass changes .
In case if your requirement does not meet here then you will have to go for a LSMW .
Regards ,
Dewang T -
hi,
i have some data to be added to a custon field in PROD.... how sholuld i go around this? can i do this manually in PROD< r is there any standard procedure for this?hi if the custom field where in u wish to upload data is in infotype than use PA30, if the master data u wish to upload is in Mass than u may create a BDC or lsmw or you can use the option of fast data entry..
pl let us know if this meet ur req or u r looking something else
rgds
vishal saxena -
Custom Field using screen exits CS01/CS02/CS03
Dear Experts,
I am using Screen exits to add some text description in CS01/CS02/CS03, my requirement is to add a field 'Product Appearance' with multiple lines for the material description. For this I have created customer field 'ZTEXT1' and appended it to STKO table. Now in screen painter(SE51) i need to add 3-4 lines of type stko-ztext1 because the product desc is of size 300-400 character.
I am not able to create 3-4 lines of type stko-ztext1. Can u plz suggest how can i add 3-4 lines of type stko-ztext1 in SE51.
I am able to create a blank field in SE51 using Edit->Grouping->Step Loop->Define, but while activating it is giving error as "Input/Outpt field STKO-ZTEXT1 and key word are not in the same screen".
Plz suggest.
RegardsHi Kurtt,
Below are the available user exits :-
PCSD0001 Applications development R/3 BOMS
PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header
PCSD0004 BOM comparison
PCSD0005 BOMs: component check for material items
PCSD0006 Mass changes user exit
PCSD0007 Check changes in STKO
PCSD0008 WBS BOM: Customer-specific explosion for creating
PCSD0009 Order/WBS BOM, determine URL page
PCSD0010 Order/WBS BOM, determine explosion date
PCSD0011 Knowledge-based order BOM, parallel update
PCSD0012 Customer - Mat. number/mat. number during material exchange
PCSD0013 Customer-specific processing of an explosion for BOM browser
PCSD0014 Knowledge-based order BOM: Status
Check which one suits your requirement.
Regards
Abhii -
Required BADI to add custom fields in the Basic Data screen in MM01
Hi,
I got a requirement like this. I have to add 3 custom fields and one button in the standard transaction i.e., MM01, MM02, MM03. There is one field like producu heirarchy in the Basic Data in that field i will enter some values i want to display the description of those values in the corresponding field for that i need to create 4 custom field. We can create this by breaking the Developer Access Key but instead of that can i get any BADI to add the our custom code to display those fields. I want to add those fields in Basic Data View in the transaction MM01, MM02, MM03. I serached in SPRO but i couldn't find the respective BADI.
Pls suggest if any BADI is there for this.
Thanks in advance.Hi,
The list of BADI's are as under
WRF_DISCONT_PARAMS_I BAdI: Parameters in Fashion Discontinuation
WRF_DISCONT_FACT_E BAdI: Follow-Up Actions in Discontinuation
WRF_DISCONT_CHECKS_I BAdI: Scope of Check in Material Reorganization
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD BAdI for Article Hierarchy Connection
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR Modification-Free Archiving Enhancement of MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS Check Material for Use in iPPE
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD Integration of New Objects in Material or Article Maste
BADI_MATERIAL_CHECK Enhanced Checks for Material Master Tables
BADI_GTIN_VARIANT User Exit for Customer-Specific GTIN Variant Check
BADI_EAN_SYSTEMATIC BAdI for Internal Control of EAN Logic
Regards,
Surinder -
Warning in BAPI_PO_CHANGE using a custom field
Hi all,
I have a custom field called 'zpoblock' added to the header level in the purchase order. I have added the new field to the 'Include CI_EKKODB'. I need to use the BAPI_PO_CHANGE in order to unblock the purchase orders.
When I ran my custom program to unblock the po, i got a warning as shown below though the program updated the PO successfully.
W ME 887 Error transferring ExtensionIn data for enhancement CI_EKPODB
S 06 023 Standard PO 450012345 changed.
I have assigned the structure to ExtensionIn.
There are some custom fields at the PO line items which are not relevant for my changes.
Is this warning acceptable in the program ? What can i do to resolve it ? Would anyone have a sample program that can show me how to mass unblock purchase orders using BAPI_PO_CHANGE for a custom field ?
thanks
JoyceHi,
BAPI's and BAdI's are two quite different things. You'll find quite a lot of information on both of these on SDN - BAdI's for example:
https://wiki.sdn.sap.com/wiki/display/ABAP/EnhancementsandModifications-BADI,EnhancementFramework,UserExits,+BTE
https://wiki.sdn.sap.com/wiki/display/ABAP/ConceptsandWorkingwithBADI
Hope that helps, regards, David -
Adding custom fields in article master transaction - MM41.
Hi ,
Please find my requirement below.
Create a new custom field in the MM41->Logistic Distribution View->Other Logistic data.
The new field would be Shelf life which would be added in MARC table MARC-ZIPRKZ.
Now I would like to know how to bring this enhanced field MARC-ZIPRKZ into the Other Logistic data screen of MM41.
Have seen lot of discussion in the community. But a clear step by step procedural advice and guidance is highly appreciated.
Regards
SivaHi Siva:
Modification free enhancement of the article master is common. Part of this implementation is technical and part of this is functional configuration.
From a functional perspective, you'll want to consider far more than what you have indicated. For example:
MM41/42/43 Screen Sequence
Reference Handling – Field Selection Groups
Data Retention Levels / Copy Rules (e.g. when appending MARC)
Change Pointers
Conversion / Data Loading / ALE ARTMAS Inbound
ALE ARTMAS Outbound
MM46 Article Mass Update
WRFMASSMAT Integrated Mass Change
F4 Help / Check Tables
Text Tables / Translation
As far as data retention levels for extended fields, you can distribute customer-defined fields for MARC and other tables without including new segments in the IDoc.
Please consider:
Create Programs for Customized Subscreens
Menu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Create Program for Customized Subscreen
Read the IMG documentation here!
Screen SequenceMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Define Structure of Data Screens for Each Screen Sequence
Assign Screen Sequence to Article TypesMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Maintain Order of Main and Additional Screen
BadI and User Exit for MM46
BadI for WRFMASSMAT (see SAP Note 1024725) -
Hey All,
I am trying to figure out a way to Mass maintain Custom fields(Z fields) in KNA1 using transaction XD99. I did find some material which discussed about adding custom fields to MM17 transaction, but couldnt get any usefull information on XD99.
Any inputs or suggestions are highly appreciated.Hi,
Please check the following oss note
Note 414020 - MASS: Customer fields are not mass-maintainable
Thanks
Naren -
Adding Custom Fields to XD99, XK99
Hi,
I have a requirement to add custom fields to Customer and Vendor master transaction which are mass maintained.
XD99 and XK99 are the transaction codes. I found notes on adding custom fields to mass maintain MM17, however did not find any solution as of now to add custom fields to XD99 and XK99.
If anyone has worked on it, kindly provide me details if there is any Badi/User exit/Enhancement point to achieve this.
Regards,
Sneha Soni.This works well with standard fields, but check [Note 216596 - Include additional fields in mass maintenance|https://service.sap.com/sap/support/notes/216596] and [Note 414020 - MASS: Customer fields are not mass-maintainable|https://service.sap.com/sap/support/notes/414020]
Regards,
Raymond
Maybe you are looking for
-
I lost my itunes media folder how can I export the photos from my ipad to another location
I lost my itunes media folder and also my iPhoto files. I have the majority of the photos from iPhoto library on my iPad. How can I get them from my iPad to another location. Like exporting them to a folder on an external drive.Is this possible. I kn
-
Is 10.2.8 the furthest I can go on G3 MT w/Sonnet G4?
Ironically, I've been a proud Mac user for 14 years, but this is my first post to the Mac discussion forum. Forgive me if this question is one that has been answered elsewhere, but I couldn't find it. Over the last year or so I've been upgrading my G
-
Can an Adobe search contain many file names to be retrieved in mass?
In any Adobe product, is there a way to cut and paste a large list of file names, in one search, to be retrieved from a data base of 100,000+ searchable .pdf files? What is the maximum file names allowed in one search? Can you "mass" print (or save
-
No documents and still using memory
When I open my iCloud on my Mac and go to settings and it shows me some memory called documents, but i don't have any documents not on my iPhone not on my Mac but it still shows me memory, please help.
-
I have two Macs running 10.5.3. One is a MacBook Pro, the other is a Power Mac G4 tower upgraded w/ a dual-1.6ghz processor. When the G4 was running Tiger, I had no problem accessing it from the MacBook Pro. I could share the G4 screen and manage its