Mass Material Read
Hi,
I have a requirement to read all material master data(basic data, plant data.. & other views data) in mass scenario. Is there any specific function module already available for this?
I have checked the existing BAPIs and most of them support just a single material.
Thanks in advance for your help.
Best Regards,
Pramod
Dear Pramod,
You can create a query using SQVI or else through SQ02 and SQ01 to fetch the data from the tables like
MARA,MARC,MBEW,MARD.
Some of the Functional Module's available are
MATERIAL_PRE_READ_MA00 Mass Access to Table MAKT
MATERIAL_READ_MA00 Read material
MATERIAL_READ_MA03 Read material
MATERIAL_READ_MABW Read material
MATERIAL_READ_ALL_SINGLE Reading all material master data in the select single mode
Check and revert back.
Regards
Mangalraj.S
Similar Messages
-
Mass Material Master Records Extension
Hi All,
Mass Material Master Records Extension
I have a list of 50 materials.
I want to extend them to new sales areas and plants.
Is there a t-code for mass extension of material master records,
Please advice
thanks in advance
Rgds
PriyankaThe Options are:
1. LSMW
2. SCATT
3. BDC
It is not recommended through MM17 ot MASS.
Abap help can be taken to develop the BDC / LSMW accordingly.
Regards,
Rajesh Banka
Reward suitable points.
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread). -
Hi All,
I am having 150 material in dead stock, i want to wash up all the materials. But before wash up i want to check the stock of all materials , how we can check the stock of all the materials in one shot.
what we have to do , which t-code we have to use for mass material stock check./dear avi
t code : Display Stock List MB52
other usefull t codes
Display Stock List MB52
Display Stock in Transit Cc MB5T
Display SLED/Date of Production MB5M
Display Valuated Special Stock MBBS
Display Stocks with Subcontractor MBLB
Display Availability Overview CO09
Display Stocks for Posting Date MB5B
Display Material Items MR51
Display Cancelled Material Documents MBSM
Display Material Document for Reason for Movement MBGR
Read/Display Material Document Archive MBAL
Display Consignment Stocks MB54
Display Customer Consignment Stock and Returnable Packaging with
Customer
MB58
above tcode will display you all stock list within a number range.
hope this will solve ur problem
Reward points if helpful
thanks and regards
ravikant dewangan -
Mass meter reading result changes
Hi ,
Is there any functional module or bapi or user exits for the mass meter reading results changes.
Please let me know.
Thanks in advnace ...
Regards,
Santhosh.Try BAPI 'BAPI_MTRREADDOC_UPLOAD'.
Or Idoc function 'IDOC_INPUT_ISU_MR_UPLOAD' -
Custom Field is not updating using MM17 ( Mass Material Maintenance )
Dear All,
I have created 1 custom field in MRP1 view of MM01 tranction & that field saved into MARC table. It is working fine & I am able to change also that field using tranction code MM02. But Problem is that I want to change that custom field of material master using tranction code MM17 , which is for mass Material Maintenance. So to edit custom field of material master from MM17 what I need to do? Please suggest...
Regards
Pradip PawarHi,
Follow the below procedure,
1. In table MARC custom fields need to be add using append structure. For that need to create data elements & domain for corrosponding fields.
2.In SE51 need to copy standard program SAPLMGD1 & screen 2481( In your case screen would be different ) in to Z program.
3.Now in to the layout of Z program need to add custom fieldu2019s which we defined using append structure in MARC table.
4.Need to add Field statment for the new custom fieldu2019s into the PAI Flow logic of Z program inside CHAIN...ENDCHAIN statement.
5.Need to run transaction OMT3B and then copy screen sequence no. 21 into our Z screen sequence say Z1.
6.Once screen sequence is copied into screen sequence Z1. select sequence Z1 and double click on data screen folder.Select screen sequence with description MRP1 and after selecting it double click on Folder 'Subscreen ' and change the program given for screen no 2481 with our Z program name and Save.
Imp Note - Refer SAP Note no. 44410.
Regards,
Pradip Pawar -
MR22 Mass Material BAPI/BDC
Hi Guru!
Need some help.
My problem is to start MR22 with mass Materials and Amounts using also field KONGR-Revaluation Reasn.
1. I Was trying BDC, but it can be used maximum wtih 9 materials. When i try to put f.e. 13 materials, call transaction return me an error MSGID = 00, MSGNR = 349, MSGV1 = CKI_MR22_0250-MATNR, MSGV2 = (10)
2. Can't use BAPI_M_REVAL_CREATEPRICECHANGE and export parameter KONGR-Revaluation Reasn.
Thank you!
Regards,
Artiyom.Partially solved.
1. For BDC was helpful thread How can we scroll the table control in bdc. Is there any process.
But in my case : The key is to use PageDown. It has its own code: bdcdata_wa-fval = '=DOWN'.
2. But I still have no idea what BAPI to use for this procedure. -
Mass Re-Read of PP master data
Hi
Is there is any transaction or Way to have MASS reread PP master data in Production orders?Dear Mayuresh,
Its not possible in standard SAP,as there is no T Code to perform the same.
check this link,
Read PP Master - Mass processing
Regards
Mangalraj.S
Edited by: Mangalraj.S on Jun 5, 2009 3:31 PM -
Mass Material Assignment to Cost Object Hierarchy
Hi,
I have to assign the materials to Cost Object Hierarchy. I know that it is done thorugh TC- KKPHIE.
But if I have to assign more than 1000 materials at a time , I cannot do that in mass.
I tried to do it thorugh LSMW. The system is not allowing it to create LSMW.
I am stuck. Please let me know is there any other method of material assignment in mass.
Or any other transaction code.
Hoping to hearHi Ravi,
I have tried using LSMW and BDC. Its not working.
Is there any other transcation of material Assignment to Cost Object Hierarchy.
regards
Kami -
Mass Material extension to plants
Dear Sapguru,
I'm created one material.but now I have to extend it to other 5 plants.How can i do mass extension of material.
Pls guide.Hi
check following link you will get details of LSMW
[http://www.****************/Tutorials/LSMW/MMBAPI/Page1.htm]
Regards
kailas ugale -
Mass material to material transfer
Hi Expert
i have high volume of material for which i need material to material transfer with movement 309, is this possible with any mass transaction.
Regard
NabilHi,
Please note for movement 309 the base unit of measure that is stock keeping unit for sending and receiving material should be same
and the both material should be managed in price control "V" Moving average price
You can use LSMW , Refer few threads below
LSMW for movement type 309
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Thanks
Diwakar -
Transaction for mass material master change history
Hi,
Is there a transaction where I can see all materials that have had changes to their material master within a date range?
Example: I want to see all materials that had changes to their master between Sept 7th and Sept 10th
Thanks in advance!Dear Lee,
Check the report RSSCD100 for the table MARC,for the mentioned date range.
Regards
Mangalraj.S -
Mass Meter reading results reversal.
Dear All,
For Reversal of meter reading we are using EL37 trasaction and these FM's (ISU_METERREAD_CANCEL or ISU_O_METERREAD_ACTION) will also help us for our enhancements.
Anyway, here my requirement is Need to reverse bulk meter reading results by giving the only multiple installations in a selection criteria.
At EL37 we does not have the multiple installation selection criteria...so please help me the way on this instead of (EL37)BDC development.
Regards,
Joshi
Edited by: Josh on Aug 20, 2010 10:25 AMHello Joshi,
Please see the following thread:
Meter Reading Reversal
The information here shoudl be helpful.
Please dont forget to search threads for answers.
Regards
Olivia -
Mass PO Read/Change/Create
I have the following requirement:
1. For every PO call the BAPI ``BAPI_PO_GETDETAIL1` and get the details. Do some changes.
2. Similarly for every PO, Create & Change BAPI has to be called.
My Query is:
Since there are many PO's, so in order handle large volume of POs and to enhance the performance during such mass copy function,
what technique should I follow? The above BAPI's work for Single PO at a time.. ? Please suggest some mass copy/parallelization/multiple thread techniques to do the same.. ??
Thanks in Advance..Hi NDS,
Normally PO net price is derived trough condition values. It takes total value and then divide in the quantity. So it totally depends on the condition values.
So if the system allows to adjust values at line item level then it has different value when compared to condition values. so system wont allow to change it and that is the reason behind MASS hasn't NETWR field in it.
You can change it through a LSMW. Write a simple lsmw with "Batch Input Recording" and simply change the net price.
Hope this will helpful.
thanks & BR
sandun
Edited by: Sandun Sulakshana on Oct 9, 2009 7:24 AM -
CWBQM - Mass Material Assignment
Hi Experts
We have to assign more than 100 000 materials to inspection plans.
I found the transaction CWBQM.
As the table in 'CWBQM->Material-Task List Assignment' is a table control
I can only assign around 30 materials.
How can I add all materials (like multi-selection) into the assigning-table in CWBQM
OR how can i assign all materials to an inspection plan.
Thx for help
ChristianWhat do I have to do in this transaction?
Is it very complicated or need I much time for this?
If Yes, I think I am faster when I create a BatchInput.
Thx for your fast answer
Christian -
Problem with mass IDoc for Material Master
Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
PoojaHello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.
Maybe you are looking for
-
Upgrading from 10.2g to 11g by incrementals
Hello, I know it's possible to generate a full rman backup in a 10.2g database, move it to another server containing 11g, restore it there and finally do an upgrade. Since I have to do this to a large database and there are several things involved (a
-
I have a neighbor, new to Macs, who is hitting me with lots of questions about Macs, most of which I am able to handle. Here is one I cannot answer. Can anyone? In the past, when she had a PC and used M/S Explorer, when she printed out a web page, on
-
PR NUMBERS ARE NOT IN SEQUENCE
Hi , We are facing an issue where Purchase requisition number created are not in sequence . For e.g.Purchase requisition number 30087027 has been raised on 22.11.2011 and today's (23.11.2011) created purchase requisition number is 30086998 and 300869
-
I have a mac mini and am using a Samsung Syncmaster 940 MW as my monitor. i am new to the mac world and for some reason everytime my mac starts up the display loses resolution and seems to go to a much lower setting. If I unplug the monitor cable and
-
We've triple-checked the SSL certificates, reconfigured security options, and are fine with our McAfee secure verification, and nothing seems to help. We've gotten calls & emails from numerous customers using Firefox; I believer the majority are usin