Master data from 2 source systems

hi
i am loading 2 cubes from 2 different source system
1 is ECC and another is Flat file load from Old system which is no longer in use...
now cube1 has Customer records as it is manitained in ECC system
cube 2 has Customer records which exists in ECC and around 50 records are EXTRA
so how to load Customers?
should i load customers from ECC to 0customers
and load customers from legacy system to ZCustomers
how to approach this issues/ resolve it

As per my understanding those extra 50 customers came through flat file. If you want those records in cube you can have a one time upload from flat file to Customer master. If you want to neglect those records using foreign key settings you can stop the flow of those records into the cube. Essentially it depends upon your requirement.
Regards
Githen

Similar Messages

*Journal Entries while uploading the vendor master data from legacy system*

hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

Hi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards

Error in Process Chain while extracting data from source system

Hi All,
Dail we are facing problem while retrieving the data from source system for the data source 0TB_AMOUNT1 in the process chain, it is giving error "Function module BANK_TMC_API_SIM_GET does not exist Furnction module". when I repeat the step than it is going fine.
Please let me know why this error is coming for first why it is not coming after repeating the step?
Thanks & Regards,
Murali.

Hi Murali,
Hope you are doing good..
Is it a full or Delta load on a daily basis? Did you check if the FM exists in your system?
Did you try debugging the load in source system and check if the extractor is trying to call FM you mention.
If possible please post the exact error message you are receiving so that we could get an idea whats the error and why you are encountering it.
As of now what i can suggest is, go to RSA2 in source system, give the datasource name and check if the extractor code has FM in it.
Regards,
Anil Pragada.

Upload vendor master data from legacy system to internal table tcode xk01

through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

By learning the basics of BDC recording and the use of GUI_UPLOAD

How to upload Transaction data from source system to BI 7.0

Dear friends,
I want to know how to upload Transaction data from source system to BI 7.0.
if anybody having step by step material for this process ,please send it to my
mail id.
[email protected]
[email protected]
Thanks,
D.prabhu

Hi,
it works in the same way as before in case you are not using the new features like the dtp and the transformations. Using the new features, you schedule a infopackage to load the data up to psa and schedule a dtp to post the data to the targets.
regards
Siggi
PS: We want to share knowledge in sdn and not keeping it private by having the information sent to our email adresses.

Master data from multiple system compunding to source id

Hi all,
We have a requirement to host multiple Country SAP systems in one BW system. This requires compounding with an infoobject key on all the master data and I am using 0soursystem.
and found that this configuration is very cumbersome( time taking) we need it to be cost effective also.
Is there any other way of doing this and at the same time make the Data unique to the Country.
note: one of the system is in production for 2 years now and loose that data.
Regards,
NPR

Hi,
a) what about harmonizing master data over all systems and defining one system as the leading master data system?
b) While uploading the master data, do a concatenation of the key (material no. with the source system id or something similar)
c) assign a complete different key to the master data and post the original key to a nav. attr. and use the nav. attr. for reporting e.g. material 4711 --> change the key to 0001, post the original no. 4711 to a attr. called zmat_orig which is added as nav.-attr. to the attributes.
regards
Siggi

System slow during loading data from source system

hi,
I am trying to load master data from r/3 into bw in quality envirnoment by means of a process chain. The problem is it being a master data load is consuming a lot of time. My development and quality environments are maintained on the same server. I doubt about this being something related to memory. If anybody could mention the ways through which memory can be monitored along with the reason for the slow nature of the system would be very helpful.
Source system: R/3.
Environment : Q03(quality)
Load : Master data(full load)

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
Thanks,
JituK

Master Data and Source System Data Reconciliation.

Hi Experts,
I would like to know the best ways in reconciliation between the source system and the data that is extracted into BW.
We are using only standard DataSources.
I am currently running RSA3 on a DataSource on IS-U side and then comparing it to the number of records in Master Data Maintenance on BW side. But I have noticed difference in counts.
There is no ABAP logic behind the extractors.
Kindly, suggest the best ways to do effective reconciliation.
Thanks in Advance.
Best Regards,
Chandu.

At the outset, I will sugegst you activate the data in the master data info object and also perform attrubute change run before you start the reconciliation.
One of the main reasons of data mismatch for master data is presence of "duplicate" records at the source system and you do eliminate them during the data loading process. In your case, you say there is no data manipulation during the data loading process.
Another reason is where you bring master data from multiple sources and the later load of data overwriting the earlier load of data for the same key of records.
Assume you load data to the PSA before you load to the info object. The practice is to reconcile with the PSA data to the RSA3 first and then between the PSA and the master data.
Ravi Thothadri

Error Occures while loading data from Source system to Target ODS

Hi..
I started loading Records From source system to target ODS.while i running the job i got the following errors.
Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
sp Please help me in these following Errors..
Thanks in advance,

Hello
How r u ?
I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
Best Regards....
Sankar Kumar
+91 98403 47141

Transfering data from source system to bw

I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
   please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
              ]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)

I am sending data from two source systems into single data target in bw. For ex:- think that there are KPI's in the first source system & another 4 in the second source system.When i load it into bw i should see the 8 KPI's in a single record is it possible.
   please some one can help me in this regard i will be thankful to them.
S.S 1(4 KPI's)
              ]-------BW(DT)8KPI's in the same record
S.S 2(4 KPI's)

Steps to Extract data from Source System

Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.

Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay

Error occured in the data selection while extract data from Source system

Hello Friends
i am facing Problem while extracting data to Biw System from SAP R/3 system
The error mesage is 'Error occured in the data selection '
i.e. Monitoring - Details tab - Extraction - With error

Hi
The delta wil take the Last init selection for loading data in to the BW...
Did u check the IP at the Update tab is it the correct delta only.. or its a full..
better to go to the RSA3 and check the extractor in the Delta mode .. if u give ur delta mode it automatically takes the selction options.. so please try in RSA3..
regards
CK
PS: CHECK THE INIT SELECTIONS TOO or do an init with outdatatransfer and perform the delta...
Message was edited by:
BW Star

Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

Uploading Material Master data from legacy system

Hi all,
do we have any sap defined bdc for material master data ,if no ho to do that can anybody explain me step by step procedure how to do that
Thanks in advance
Santosh R

Santosh,
Use BAPI as we already have pre-defined BAPI for material upload given by SAP.
<b>BAPI_MATERIAL_SAVEDATA</b>
Also check this BAPI in MM01 uploading for the complete code I have written.
Regards
Aneesh.

No data in source system

Hi at all,
I extrakted initial data from source system and get a warning "No data in source system". I checked the system and it is ok. Plz help me

Hi
Yep ,,, if u do and delta after Init ...the records it will fetch is 0records
IF there are no changes happend in r3 then u wont get the data ..
So, Go to the R3
1) check ur delta queue in R3
2) or RSA3 and test extract for ur datasource in the D mode and also select ur sourcesystem as the BW sstem
u have to get 0 records
hope it helps
regards
AK

Reg:when i was uploading data from legacy system

Hi All,
it is any Include program
for tcode mpr1
when i was upload the data for forecast values from
legacy system to sap system .
only one record is geting updated
other records are not updateding
i have retun logic like this
code,,,,,,,,
TYPES: BEGIN OF TY_FILE,
        WERKS LIKE MAPR-WERKS,
        MATNR LIKE MAPR-MATNR,
        PRWRT LIKE PROW-PRWRT,
       END OF TY_FILE.
DATA: IT_FILE TYPE STANDARD TABLE OF TY_FILE,
      WA_FILE TYPE TY_FILE.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE,
       IT_MARC LIKE MARC OCCURS 0 WITH HEADER LINE.
DATA : LV_FILE TYPE STRING.
LV_FILE = I_MPR1USERPAR.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
    FILENAME                = LV_FILE
    FILETYPE                = 'DAT'
    HAS_FIELD_SEPARATOR     = 'X'
CHANGING
    DATA_TAB                = IT_FILE
EXCEPTIONS
    FILE_OPEN_ERROR         = 1
    FILE_READ_ERROR         = 2
    NO_BATCH                = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE            = 5
    NO_AUTHORITY            = 6
    UNKNOWN_ERROR           = 7
    BAD_DATA_FORMAT         = 8
    HEADER_NOT_ALLOWED      = 9
    SEPARATOR_NOT_ALLOWED   = 10
    HEADER_TOO_LONG         = 11
    UNKNOWN_DP_ERROR        = 12
    ACCESS_DENIED           = 13
    DP_OUT_OF_MEMORY        = 14
    DISK_FULL               = 15
    DP_TIMEOUT              = 16
    NOT_SUPPORTED_BY_GUI    = 17
    ERROR_NO_GUI            = 18
    OTHERS                  = 19
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_ARTICLES.
    CLEAR : IT_MARA,IT_MARC.
    SELECT SINGLE * FROM MARA INTO IT_MARA WHERE MATNR = T_ARTICLES-MATNR.
    SELECT SINGLE * FROM MARC INTO IT_MARC WHERE MATNR = T_ARTICLES-MATNR
                                             AND WERKS = T_ARTICLES-WERKS.
ENDLOOP.
LOOP AT IT_FILE INTO WA_FILE .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      INPUT = WA_FILE-MATNR
    IMPORTING
      OUTPUT = WA_FILE-MATNR.
T_FORECAST_VALUES-WERKS = WA_FILE-WERKS.
T_FORECAST_VALUES-MATNR = WA_FILE-MATNR.
T_FORECAST_VALUES-PERKZ = IT_MARC-PERKZ.
T_FORECAST_VALUES-ERTAG = T_ARTICLES-PRDAT_NEW.
T_FORECAST_VALUES-KOPRW = WA_FILE-PRWRT.
T_FORECAST_VALUES-MEINS = IT_MARA-MEINS.
APPEND T_FORECAST_VALUES.
CLEAR : T_FORECAST_VALUES.
ENDLOOP.
thanks
mars

For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas

Master data from 2 source systems

Similar Messages

Maybe you are looking for